linux/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
Dmitry Kravkov 07b4eb3b53 bnx2x: Change DCB context handling
After notification that DCBX configuration has ended arrived to the driver,
the driver configured the FW/HW in sleepless context.
As a result, it was possible to reach a race (mostly with CNIC registration)
in which the configuration will return a timeout, failing to set the DCBX
results correctly.

This patch moves the configuration following the DCBX end into the slowpath
RTNL task (i.e., sleepless context protected by the RTNL lock), allowing the
configuration to cope with such races.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 00:21:47 -07:00

206 lines
6.0 KiB
C

/* bnx2x_dcb.h: Broadcom Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* consent.
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Dmitry Kravkov
*
*/
#ifndef BNX2X_DCB_H
#define BNX2X_DCB_H
#include "bnx2x_hsi.h"
#define LLFC_DRIVER_TRAFFIC_TYPE_MAX 3 /* NW, iSCSI, FCoE */
struct bnx2x_dcbx_app_params {
u32 enabled;
u32 traffic_type_priority[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
};
#define DCBX_COS_MAX_NUM_E2 DCBX_E2E3_MAX_NUM_COS
/* bnx2x currently limits numbers of supported COSes to 3 to be extended to 6 */
#define BNX2X_MAX_COS_SUPPORT 3
#define DCBX_COS_MAX_NUM_E3B0 BNX2X_MAX_COS_SUPPORT
#define DCBX_COS_MAX_NUM BNX2X_MAX_COS_SUPPORT
struct bnx2x_dcbx_cos_params {
u32 bw_tbl;
u32 pri_bitmask;
/*
* strict priority: valid values are 0..5; 0 is highest priority.
* There can't be two COSes with the same priority.
*/
u8 strict;
#define BNX2X_DCBX_STRICT_INVALID DCBX_COS_MAX_NUM
#define BNX2X_DCBX_STRICT_COS_HIGHEST 0
#define BNX2X_DCBX_STRICT_COS_NEXT_LOWER_PRI(sp) ((sp) + 1)
u8 pauseable;
};
struct bnx2x_dcbx_pg_params {
u32 enabled;
u8 num_of_cos; /* valid COS entries */
struct bnx2x_dcbx_cos_params cos_params[DCBX_COS_MAX_NUM];
};
struct bnx2x_dcbx_pfc_params {
u32 enabled;
u32 priority_non_pauseable_mask;
};
struct bnx2x_dcbx_port_params {
struct bnx2x_dcbx_pfc_params pfc;
struct bnx2x_dcbx_pg_params ets;
struct bnx2x_dcbx_app_params app;
};
#define BNX2X_DCBX_CONFIG_INV_VALUE (0xFFFFFFFF)
#define BNX2X_DCBX_OVERWRITE_SETTINGS_DISABLE 0
#define BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE 1
#define BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID (BNX2X_DCBX_CONFIG_INV_VALUE)
#define BNX2X_IS_ETS_ENABLED(bp) ((bp)->dcb_state == BNX2X_DCB_STATE_ON &&\
(bp)->dcbx_port_params.ets.enabled)
struct bnx2x_config_lldp_params {
u32 overwrite_settings;
u32 msg_tx_hold;
u32 msg_fast_tx;
u32 tx_credit_max;
u32 msg_tx_interval;
u32 tx_fast;
};
struct bnx2x_admin_priority_app_table {
u32 valid;
u32 priority;
#define INVALID_TRAFFIC_TYPE_PRIORITY (0xFFFFFFFF)
u32 traffic_type;
#define TRAFFIC_TYPE_ETH 0
#define TRAFFIC_TYPE_PORT 1
u32 app_id;
};
#define DCBX_CONFIG_MAX_APP_PROTOCOL 4
struct bnx2x_config_dcbx_params {
u32 overwrite_settings;
u32 admin_dcbx_version;
u32 admin_ets_enable;
u32 admin_pfc_enable;
u32 admin_tc_supported_tx_enable;
u32 admin_ets_configuration_tx_enable;
u32 admin_ets_recommendation_tx_enable;
u32 admin_pfc_tx_enable;
u32 admin_application_priority_tx_enable;
u32 admin_ets_willing;
u32 admin_ets_reco_valid;
u32 admin_pfc_willing;
u32 admin_app_priority_willing;
u32 admin_configuration_bw_precentage[8];
u32 admin_configuration_ets_pg[8];
u32 admin_recommendation_bw_precentage[8];
u32 admin_recommendation_ets_pg[8];
u32 admin_pfc_bitmap;
struct bnx2x_admin_priority_app_table
admin_priority_app_table[DCBX_CONFIG_MAX_APP_PROTOCOL];
u32 admin_default_priority;
};
#define GET_FLAGS(flags, bits) ((flags) & (bits))
#define SET_FLAGS(flags, bits) ((flags) |= (bits))
#define RESET_FLAGS(flags, bits) ((flags) &= ~(bits))
enum {
DCBX_READ_LOCAL_MIB,
DCBX_READ_REMOTE_MIB
};
#define ETH_TYPE_FCOE (0x8906)
#define TCP_PORT_ISCSI (0xCBC)
#define PFC_VALUE_FRAME_SIZE (512)
#define PFC_QUANTA_IN_NANOSEC_FROM_SPEED_MEGA(mega_speed) \
((1000 * PFC_VALUE_FRAME_SIZE)/(mega_speed))
#define PFC_BRB1_REG_HIGH_LLFC_LOW_THRESHOLD 130
#define PFC_BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD 170
struct cos_entry_help_data {
u32 pri_join_mask;
u32 cos_bw;
u8 strict;
bool pausable;
};
struct cos_help_data {
struct cos_entry_help_data data[DCBX_COS_MAX_NUM];
u8 num_of_cos;
};
#define DCBX_ILLEGAL_PG (0xFF)
#define DCBX_PFC_PRI_MASK (0xFF)
#define DCBX_STRICT_PRIORITY (15)
#define DCBX_INVALID_COS_BW (0xFFFFFFFF)
#define DCBX_PFC_PRI_NON_PAUSE_MASK(bp) \
((bp)->dcbx_port_params.pfc.priority_non_pauseable_mask)
#define DCBX_PFC_PRI_PAUSE_MASK(bp) \
((u8)~DCBX_PFC_PRI_NON_PAUSE_MASK(bp))
#define DCBX_PFC_PRI_GET_PAUSE(bp, pg_pri) \
((pg_pri) & (DCBX_PFC_PRI_PAUSE_MASK(bp)))
#define DCBX_PFC_PRI_GET_NON_PAUSE(bp, pg_pri) \
(DCBX_PFC_PRI_NON_PAUSE_MASK(bp) & (pg_pri))
#define DCBX_IS_PFC_PRI_SOME_PAUSE(bp, pg_pri) \
(0 != DCBX_PFC_PRI_GET_PAUSE(bp, pg_pri))
#define IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pg_pri) \
(pg_pri == DCBX_PFC_PRI_GET_PAUSE((bp), (pg_pri)))
#define IS_DCBX_PFC_PRI_ONLY_NON_PAUSE(bp, pg_pri)\
((pg_pri) == DCBX_PFC_PRI_GET_NON_PAUSE((bp), (pg_pri)))
#define IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pg_pri) \
(!(IS_DCBX_PFC_PRI_ONLY_NON_PAUSE((bp), (pg_pri)) || \
IS_DCBX_PFC_PRI_ONLY_PAUSE((bp), (pg_pri))))
struct pg_entry_help_data {
u8 num_of_dif_pri;
u8 pg;
u32 pg_priority;
};
struct pg_help_data {
struct pg_entry_help_data data[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
u8 num_of_pg;
};
/* forward DCB/PFC related declarations */
struct bnx2x;
void bnx2x_dcbx_update(struct work_struct *work);
void bnx2x_dcbx_init_params(struct bnx2x *bp);
void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled);
enum {
BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1,
BNX2X_DCBX_STATE_TX_PAUSED,
BNX2X_DCBX_STATE_TX_RELEASED
};
void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state);
void bnx2x_dcbx_pmf_update(struct bnx2x *bp);
/* DCB netlink */
#ifdef BCM_DCBNL
extern const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops;
int bnx2x_dcbnl_update_applist(struct bnx2x *bp, bool delall);
#endif /* BCM_DCBNL */
int bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp);
int bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp);
#endif /* BNX2X_DCB_H */