forked from Minki/linux
d0d378ff45
With CONFIG_FORTIFY_SOURCE, memcpy uses the declared size of operands to
detect buffer overflows. If src or dest is declared as a char, attempts to
copy more than byte will result in a fortify_panic().
Address this problem in mvebu_setup_boot_addr_wa() by declaring
mvebu_boot_wa_start and mvebu_boot_wa_end as character arrays. Also remove
a couple addressof operators to avoid "arithmetic on pointer to an
incomplete type" compiler error.
See commit 54a7d50b92
("x86: mark kprobe templates as character arrays,
not single characters") for a similar fix.
Fixes "detected buffer overflow in memcpy" error during init on some mvebu
systems (armada-370-xp, armada-375):
(fortify_panic) from (mvebu_setup_boot_addr_wa+0xb0/0xb4)
(mvebu_setup_boot_addr_wa) from (mvebu_v7_cpu_pm_init+0x154/0x204)
(mvebu_v7_cpu_pm_init) from (do_one_initcall+0x7c/0x1a8)
(do_one_initcall) from (kernel_init_freeable+0x1bc/0x254)
(kernel_init_freeable) from (kernel_init+0x8/0x114)
(kernel_init) from (ret_from_fork+0x14/0x2c)
Signed-off-by: Ethan Tuttle <ethan@ethantuttle.com>
Tested-by: Ethan Tuttle <ethan@ethantuttle.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
610 lines
16 KiB
C
610 lines
16 KiB
C
/*
|
|
* Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
|
|
*
|
|
* Copyright (C) 2012 Marvell
|
|
*
|
|
* Yehuda Yitschak <yehuday@marvell.com>
|
|
* Gregory Clement <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*
|
|
* The Armada 370 and Armada XP SOCs have a power management service
|
|
* unit which is responsible for powering down and waking up CPUs and
|
|
* other SOC units
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "mvebu-pmsu: " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mbus.h>
|
|
#include <linux/mvebu-pmsu.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/smp.h>
|
|
#include <asm/cacheflush.h>
|
|
#include <asm/cp15.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/smp_plat.h>
|
|
#include <asm/suspend.h>
|
|
#include <asm/tlbflush.h>
|
|
#include "common.h"
|
|
#include "pmsu.h"
|
|
|
|
#define PMSU_BASE_OFFSET 0x100
|
|
#define PMSU_REG_SIZE 0x1000
|
|
|
|
/* PMSU MP registers */
|
|
#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104)
|
|
#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18)
|
|
#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16)
|
|
#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20)
|
|
|
|
#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108)
|
|
|
|
#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0)
|
|
|
|
#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c)
|
|
#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16)
|
|
#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17)
|
|
#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20)
|
|
#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21)
|
|
#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22)
|
|
#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24)
|
|
#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25)
|
|
|
|
#define PMSU_EVENT_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x120)
|
|
#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE BIT(1)
|
|
#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK BIT(17)
|
|
|
|
#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
|
|
|
|
/* PMSU fabric registers */
|
|
#define L2C_NFABRIC_PM_CTL 0x4
|
|
#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20)
|
|
|
|
/* PMSU delay registers */
|
|
#define PMSU_POWERDOWN_DELAY 0xF04
|
|
#define PMSU_POWERDOWN_DELAY_PMU BIT(1)
|
|
#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE
|
|
#define PMSU_DFLT_ARMADA38X_DELAY 0x64
|
|
|
|
/* CA9 MPcore SoC Control registers */
|
|
|
|
#define MPCORE_RESET_CTL 0x64
|
|
#define MPCORE_RESET_CTL_L2 BIT(0)
|
|
#define MPCORE_RESET_CTL_DEBUG BIT(16)
|
|
|
|
#define SRAM_PHYS_BASE 0xFFFF0000
|
|
#define BOOTROM_BASE 0xFFF00000
|
|
#define BOOTROM_SIZE 0x100000
|
|
|
|
#define ARMADA_370_CRYPT0_ENG_TARGET 0x9
|
|
#define ARMADA_370_CRYPT0_ENG_ATTR 0x1
|
|
|
|
extern void ll_disable_coherency(void);
|
|
extern void ll_enable_coherency(void);
|
|
|
|
extern void armada_370_xp_cpu_resume(void);
|
|
extern void armada_38x_cpu_resume(void);
|
|
|
|
static phys_addr_t pmsu_mp_phys_base;
|
|
static void __iomem *pmsu_mp_base;
|
|
|
|
static void *mvebu_cpu_resume;
|
|
|
|
static const struct of_device_id of_pmsu_table[] = {
|
|
{ .compatible = "marvell,armada-370-pmsu", },
|
|
{ .compatible = "marvell,armada-370-xp-pmsu", },
|
|
{ .compatible = "marvell,armada-380-pmsu", },
|
|
{ /* end of list */ },
|
|
};
|
|
|
|
void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
|
|
{
|
|
writel(__pa_symbol(boot_addr), pmsu_mp_base +
|
|
PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
|
|
}
|
|
|
|
extern unsigned char mvebu_boot_wa_start[];
|
|
extern unsigned char mvebu_boot_wa_end[];
|
|
|
|
/*
|
|
* This function sets up the boot address workaround needed for SMP
|
|
* boot on Armada 375 Z1 and cpuidle on Armada 370. It unmaps the
|
|
* BootROM Mbus window, and instead remaps a crypto SRAM into which a
|
|
* custom piece of code is copied to replace the problematic BootROM.
|
|
*/
|
|
int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
|
|
unsigned int crypto_eng_attribute,
|
|
phys_addr_t resume_addr_reg)
|
|
{
|
|
void __iomem *sram_virt_base;
|
|
u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start;
|
|
|
|
mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
|
|
mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute,
|
|
SRAM_PHYS_BASE, SZ_64K);
|
|
|
|
sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
|
|
if (!sram_virt_base) {
|
|
pr_err("Unable to map SRAM to setup the boot address WA\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memcpy(sram_virt_base, &mvebu_boot_wa_start, code_len);
|
|
|
|
/*
|
|
* The last word of the code copied in SRAM must contain the
|
|
* physical base address of the PMSU register. We
|
|
* intentionally store this address in the native endianness
|
|
* of the system.
|
|
*/
|
|
__raw_writel((unsigned long)resume_addr_reg,
|
|
sram_virt_base + code_len - 4);
|
|
|
|
iounmap(sram_virt_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mvebu_v7_pmsu_init(void)
|
|
{
|
|
struct device_node *np;
|
|
struct resource res;
|
|
int ret = 0;
|
|
|
|
np = of_find_matching_node(NULL, of_pmsu_table);
|
|
if (!np)
|
|
return 0;
|
|
|
|
pr_info("Initializing Power Management Service Unit\n");
|
|
|
|
if (of_address_to_resource(np, 0, &res)) {
|
|
pr_err("unable to get resource\n");
|
|
ret = -ENOENT;
|
|
goto out;
|
|
}
|
|
|
|
if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
|
|
pr_warn(FW_WARN "deprecated pmsu binding\n");
|
|
res.start = res.start - PMSU_BASE_OFFSET;
|
|
res.end = res.start + PMSU_REG_SIZE - 1;
|
|
}
|
|
|
|
if (!request_mem_region(res.start, resource_size(&res),
|
|
np->full_name)) {
|
|
pr_err("unable to request region\n");
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
pmsu_mp_phys_base = res.start;
|
|
|
|
pmsu_mp_base = ioremap(res.start, resource_size(&res));
|
|
if (!pmsu_mp_base) {
|
|
pr_err("unable to map registers\n");
|
|
release_mem_region(res.start, resource_size(&res));
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
of_node_put(np);
|
|
return ret;
|
|
}
|
|
|
|
static void mvebu_v7_pmsu_enable_l2_powerdown_onidle(void)
|
|
{
|
|
u32 reg;
|
|
|
|
if (pmsu_mp_base == NULL)
|
|
return;
|
|
|
|
/* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
|
|
reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
|
|
reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
|
|
writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
|
|
}
|
|
|
|
enum pmsu_idle_prepare_flags {
|
|
PMSU_PREPARE_NORMAL = 0,
|
|
PMSU_PREPARE_DEEP_IDLE = BIT(0),
|
|
PMSU_PREPARE_SNOOP_DISABLE = BIT(1),
|
|
};
|
|
|
|
/* No locking is needed because we only access per-CPU registers */
|
|
static int mvebu_v7_pmsu_idle_prepare(unsigned long flags)
|
|
{
|
|
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
|
|
u32 reg;
|
|
|
|
if (pmsu_mp_base == NULL)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Adjust the PMSU configuration to wait for WFI signal, enable
|
|
* IRQ and FIQ as wakeup events, set wait for snoop queue empty
|
|
* indication and mask IRQ and FIQ from CPU
|
|
*/
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
|
|
PMSU_STATUS_AND_MASK_IRQ_WAKEUP |
|
|
PMSU_STATUS_AND_MASK_FIQ_WAKEUP |
|
|
PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
|
|
PMSU_STATUS_AND_MASK_IRQ_MASK |
|
|
PMSU_STATUS_AND_MASK_FIQ_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
|
|
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
/* ask HW to power down the L2 Cache if needed */
|
|
if (flags & PMSU_PREPARE_DEEP_IDLE)
|
|
reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
|
|
|
|
/* request power down */
|
|
reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
|
|
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
|
|
if (flags & PMSU_PREPARE_SNOOP_DISABLE) {
|
|
/* Disable snoop disable by HW - SW is taking care of it */
|
|
reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
|
|
reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
|
|
writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
|
|
{
|
|
unsigned long flags = PMSU_PREPARE_SNOOP_DISABLE;
|
|
int ret;
|
|
|
|
if (deepidle)
|
|
flags |= PMSU_PREPARE_DEEP_IDLE;
|
|
|
|
ret = mvebu_v7_pmsu_idle_prepare(flags);
|
|
if (ret)
|
|
return ret;
|
|
|
|
v7_exit_coherency_flush(all);
|
|
|
|
ll_disable_coherency();
|
|
|
|
dsb();
|
|
|
|
wfi();
|
|
|
|
/* If we are here, wfi failed. As processors run out of
|
|
* coherency for some time, tlbs might be stale, so flush them
|
|
*/
|
|
local_flush_tlb_all();
|
|
|
|
ll_enable_coherency();
|
|
|
|
/* Test the CR_C bit and set it if it was cleared */
|
|
asm volatile(
|
|
"mrc p15, 0, r0, c1, c0, 0 \n\t"
|
|
"tst r0, %0 \n\t"
|
|
"orreq r0, r0, #(1 << 2) \n\t"
|
|
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
|
|
"isb "
|
|
: : "Ir" (CR_C) : "r0");
|
|
|
|
pr_debug("Failed to suspend the system\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int armada_370_xp_cpu_suspend(unsigned long deepidle)
|
|
{
|
|
return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
|
|
}
|
|
|
|
int armada_38x_do_cpu_suspend(unsigned long deepidle)
|
|
{
|
|
unsigned long flags = 0;
|
|
|
|
if (deepidle)
|
|
flags |= PMSU_PREPARE_DEEP_IDLE;
|
|
|
|
mvebu_v7_pmsu_idle_prepare(flags);
|
|
/*
|
|
* Already flushed cache, but do it again as the outer cache
|
|
* functions dirty the cache with spinlocks
|
|
*/
|
|
v7_exit_coherency_flush(louis);
|
|
|
|
scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF);
|
|
|
|
cpu_do_idle();
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int armada_38x_cpu_suspend(unsigned long deepidle)
|
|
{
|
|
return cpu_suspend(false, armada_38x_do_cpu_suspend);
|
|
}
|
|
|
|
/* No locking is needed because we only access per-CPU registers */
|
|
void mvebu_v7_pmsu_idle_exit(void)
|
|
{
|
|
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
|
|
u32 reg;
|
|
|
|
if (pmsu_mp_base == NULL)
|
|
return;
|
|
/* cancel ask HW to power down the L2 Cache if possible */
|
|
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
|
|
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
|
|
|
|
/* cancel Enable wakeup events and mask interrupts */
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
|
|
reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
|
|
reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
|
|
reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
|
|
}
|
|
|
|
static int mvebu_v7_cpu_pm_notify(struct notifier_block *self,
|
|
unsigned long action, void *hcpu)
|
|
{
|
|
if (action == CPU_PM_ENTER) {
|
|
unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
|
|
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cpu_resume);
|
|
} else if (action == CPU_PM_EXIT) {
|
|
mvebu_v7_pmsu_idle_exit();
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block mvebu_v7_cpu_pm_notifier = {
|
|
.notifier_call = mvebu_v7_cpu_pm_notify,
|
|
};
|
|
|
|
static struct platform_device mvebu_v7_cpuidle_device;
|
|
|
|
static int broken_idle(struct device_node *np)
|
|
{
|
|
if (of_property_read_bool(np, "broken-idle")) {
|
|
pr_warn("CPU idle is currently broken: disabling\n");
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __init int armada_370_cpuidle_init(void)
|
|
{
|
|
struct device_node *np;
|
|
phys_addr_t redirect_reg;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (broken_idle(np))
|
|
goto end;
|
|
|
|
/*
|
|
* On Armada 370, there is "a slow exit process from the deep
|
|
* idle state due to heavy L1/L2 cache cleanup operations
|
|
* performed by the BootROM software". To avoid this, we
|
|
* replace the restart code of the bootrom by a a simple jump
|
|
* to the boot address. Then the code located at this boot
|
|
* address will take care of the initialization.
|
|
*/
|
|
redirect_reg = pmsu_mp_phys_base + PMSU_BOOT_ADDR_REDIRECT_OFFSET(0);
|
|
mvebu_setup_boot_addr_wa(ARMADA_370_CRYPT0_ENG_TARGET,
|
|
ARMADA_370_CRYPT0_ENG_ATTR,
|
|
redirect_reg);
|
|
|
|
mvebu_cpu_resume = armada_370_xp_cpu_resume;
|
|
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
|
|
mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
|
|
|
|
end:
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
static __init int armada_38x_cpuidle_init(void)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *mpsoc_base;
|
|
u32 reg;
|
|
|
|
pr_warn("CPU idle is currently broken on Armada 38x: disabling\n");
|
|
return 0;
|
|
|
|
np = of_find_compatible_node(NULL, NULL,
|
|
"marvell,armada-380-coherency-fabric");
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (broken_idle(np))
|
|
goto end;
|
|
|
|
of_node_put(np);
|
|
|
|
np = of_find_compatible_node(NULL, NULL,
|
|
"marvell,armada-380-mpcore-soc-ctrl");
|
|
if (!np)
|
|
return -ENODEV;
|
|
mpsoc_base = of_iomap(np, 0);
|
|
BUG_ON(!mpsoc_base);
|
|
|
|
/* Set up reset mask when powering down the cpus */
|
|
reg = readl(mpsoc_base + MPCORE_RESET_CTL);
|
|
reg |= MPCORE_RESET_CTL_L2;
|
|
reg |= MPCORE_RESET_CTL_DEBUG;
|
|
writel(reg, mpsoc_base + MPCORE_RESET_CTL);
|
|
iounmap(mpsoc_base);
|
|
|
|
/* Set up delay */
|
|
reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY);
|
|
reg &= ~PMSU_POWERDOWN_DELAY_MASK;
|
|
reg |= PMSU_DFLT_ARMADA38X_DELAY;
|
|
reg |= PMSU_POWERDOWN_DELAY_PMU;
|
|
writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY);
|
|
|
|
mvebu_cpu_resume = armada_38x_cpu_resume;
|
|
mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
|
|
mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
|
|
|
|
end:
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
static __init int armada_xp_cpuidle_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
if (broken_idle(np))
|
|
goto end;
|
|
|
|
mvebu_cpu_resume = armada_370_xp_cpu_resume;
|
|
mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
|
|
mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
|
|
|
|
end:
|
|
of_node_put(np);
|
|
return 0;
|
|
}
|
|
|
|
static int __init mvebu_v7_cpu_pm_init(void)
|
|
{
|
|
struct device_node *np;
|
|
int ret;
|
|
|
|
np = of_find_matching_node(NULL, of_pmsu_table);
|
|
if (!np)
|
|
return 0;
|
|
of_node_put(np);
|
|
|
|
/*
|
|
* Currently the CPU idle support for Armada 38x is broken, as
|
|
* the CPU hotplug uses some of the CPU idle functions it is
|
|
* broken too, so let's disable it
|
|
*/
|
|
if (of_machine_is_compatible("marvell,armada380")) {
|
|
cpu_hotplug_disable();
|
|
pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n");
|
|
}
|
|
|
|
if (of_machine_is_compatible("marvell,armadaxp"))
|
|
ret = armada_xp_cpuidle_init();
|
|
else if (of_machine_is_compatible("marvell,armada370"))
|
|
ret = armada_370_cpuidle_init();
|
|
else if (of_machine_is_compatible("marvell,armada380"))
|
|
ret = armada_38x_cpuidle_init();
|
|
else
|
|
return 0;
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
mvebu_v7_pmsu_enable_l2_powerdown_onidle();
|
|
if (mvebu_v7_cpuidle_device.name)
|
|
platform_device_register(&mvebu_v7_cpuidle_device);
|
|
cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier);
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(mvebu_v7_cpu_pm_init);
|
|
early_initcall(mvebu_v7_pmsu_init);
|
|
|
|
static void mvebu_pmsu_dfs_request_local(void *data)
|
|
{
|
|
u32 reg;
|
|
u32 cpu = smp_processor_id();
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Prepare to enter idle */
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
|
|
PMSU_STATUS_AND_MASK_IRQ_MASK |
|
|
PMSU_STATUS_AND_MASK_FIQ_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
|
|
/* Request the DFS transition */
|
|
reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
|
|
reg |= PMSU_CONTROL_AND_CONFIG_DFS_REQ;
|
|
writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
|
|
|
|
/* The fact of entering idle will trigger the DFS transition */
|
|
wfi();
|
|
|
|
/*
|
|
* We're back from idle, the DFS transition has completed,
|
|
* clear the idle wait indication.
|
|
*/
|
|
reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
|
|
writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
|
|
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
int mvebu_pmsu_dfs_request(int cpu)
|
|
{
|
|
unsigned long timeout;
|
|
int hwcpu = cpu_logical_map(cpu);
|
|
u32 reg;
|
|
|
|
/* Clear any previous DFS DONE event */
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE;
|
|
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
|
|
/* Mask the DFS done interrupt, since we are going to poll */
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
reg |= PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
|
|
/* Trigger the DFS on the appropriate CPU */
|
|
smp_call_function_single(cpu, mvebu_pmsu_dfs_request_local,
|
|
NULL, false);
|
|
|
|
/* Poll until the DFS done event is generated */
|
|
timeout = jiffies + HZ;
|
|
while (time_before(jiffies, timeout)) {
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
if (reg & PMSU_EVENT_STATUS_AND_MASK_DFS_DONE)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (time_after(jiffies, timeout))
|
|
return -ETIME;
|
|
|
|
/* Restore the DFS mask to its original state */
|
|
reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
|
|
writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
|
|
|
|
return 0;
|
|
}
|