forked from Minki/linux
9b53a9e28a
The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
135 lines
5.6 KiB
Makefile
135 lines
5.6 KiB
Makefile
# Makefile for the Linux video drivers.
|
|
# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
|
|
# Rewritten to use lists instead of if-statements.
|
|
|
|
# Each configuration option enables a list of files.
|
|
|
|
obj-$(CONFIG_VGASTATE) += vgastate.o
|
|
obj-y += fb_notify.o
|
|
obj-$(CONFIG_FB) += fb.o
|
|
fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
|
|
modedb.o fbcvt.o
|
|
fb-objs := $(fb-y)
|
|
|
|
obj-$(CONFIG_VT) += console/
|
|
obj-$(CONFIG_LOGO) += logo/
|
|
obj-y += backlight/ display/
|
|
|
|
obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
|
|
obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
|
|
obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
|
|
obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o
|
|
obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o
|
|
obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
|
|
obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o
|
|
obj-$(CONFIG_FB_SVGALIB) += svgalib.o
|
|
obj-$(CONFIG_FB_MACMODES) += macmodes.o
|
|
obj-$(CONFIG_FB_DDC) += fb_ddc.o
|
|
obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o
|
|
|
|
# Hardware specific drivers go first
|
|
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o
|
|
obj-$(CONFIG_FB_ARC) += arcfb.o
|
|
obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o
|
|
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
|
|
obj-$(CONFIG_FB_PM2) += pm2fb.o
|
|
obj-$(CONFIG_FB_PM3) += pm3fb.o
|
|
|
|
obj-$(CONFIG_FB_MATROX) += matrox/
|
|
obj-$(CONFIG_FB_RIVA) += riva/
|
|
obj-$(CONFIG_FB_NVIDIA) += nvidia/
|
|
obj-$(CONFIG_FB_ATY) += aty/ macmodes.o
|
|
obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o
|
|
obj-$(CONFIG_FB_RADEON) += aty/
|
|
obj-$(CONFIG_FB_SIS) += sis/
|
|
obj-$(CONFIG_FB_KYRO) += kyro/
|
|
obj-$(CONFIG_FB_SAVAGE) += savage/
|
|
obj-$(CONFIG_FB_GEODE) += geode/
|
|
obj-$(CONFIG_FB_MBX) += mbx/
|
|
obj-$(CONFIG_FB_NEOMAGIC) += neofb.o
|
|
obj-$(CONFIG_FB_3DFX) += tdfxfb.o
|
|
obj-$(CONFIG_FB_CONTROL) += controlfb.o
|
|
obj-$(CONFIG_FB_PLATINUM) += platinumfb.o
|
|
obj-$(CONFIG_FB_VALKYRIE) += valkyriefb.o
|
|
obj-$(CONFIG_FB_CT65550) += chipsfb.o
|
|
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
|
|
obj-$(CONFIG_FB_FM2) += fm2fb.o
|
|
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
|
|
obj-$(CONFIG_FB_CYBLA) += cyblafb.o
|
|
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
|
|
obj-$(CONFIG_FB_LE80578) += vermilion/
|
|
obj-$(CONFIG_FB_S3) += s3fb.o
|
|
obj-$(CONFIG_FB_ARK) += arkfb.o
|
|
obj-$(CONFIG_FB_STI) += stifb.o
|
|
obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
|
|
obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o
|
|
obj-$(CONFIG_FB_CG3) += cg3.o sbuslib.o
|
|
obj-$(CONFIG_FB_BW2) += bw2.o sbuslib.o
|
|
obj-$(CONFIG_FB_CG14) += cg14.o sbuslib.o
|
|
obj-$(CONFIG_FB_P9100) += p9100.o sbuslib.o
|
|
obj-$(CONFIG_FB_TCX) += tcx.o sbuslib.o
|
|
obj-$(CONFIG_FB_LEO) += leo.o sbuslib.o
|
|
obj-$(CONFIG_FB_SGIVW) += sgivwfb.o
|
|
obj-$(CONFIG_FB_ACORN) += acornfb.o
|
|
obj-$(CONFIG_FB_ATARI) += atafb.o c2p.o atafb_mfb.o \
|
|
atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
|
|
obj-$(CONFIG_FB_MAC) += macfb.o
|
|
obj-$(CONFIG_FB_HECUBA) += hecubafb.o
|
|
obj-$(CONFIG_FB_HGA) += hgafb.o
|
|
obj-$(CONFIG_FB_XVR500) += sunxvr500.o
|
|
obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o
|
|
obj-$(CONFIG_FB_IGA) += igafb.o
|
|
obj-$(CONFIG_FB_APOLLO) += dnfb.o
|
|
obj-$(CONFIG_FB_Q40) += q40fb.o
|
|
obj-$(CONFIG_FB_TGA) += tgafb.o
|
|
obj-$(CONFIG_FB_HP300) += hpfb.o
|
|
obj-$(CONFIG_FB_G364) += g364fb.o
|
|
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
|
|
obj-$(CONFIG_FB_HIT) += hitfb.o
|
|
obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
|
|
obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
|
|
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
|
|
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
|
|
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
|
|
obj-$(CONFIG_FB_68328) += 68328fb.o
|
|
obj-$(CONFIG_FB_GBE) += gbefb.o
|
|
obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o
|
|
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o
|
|
obj-$(CONFIG_FB_PXA) += pxafb.o
|
|
obj-$(CONFIG_FB_W100) += w100fb.o
|
|
obj-$(CONFIG_FB_AU1100) += au1100fb.o
|
|
obj-$(CONFIG_FB_AU1200) += au1200fb.o
|
|
obj-$(CONFIG_FB_PMAG_AA) += pmag-aa-fb.o
|
|
obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o
|
|
obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o
|
|
obj-$(CONFIG_FB_MAXINE) += maxinefb.o
|
|
obj-$(CONFIG_FB_METRONOME) += metronomefb.o
|
|
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
|
|
obj-$(CONFIG_FB_IMX) += imxfb.o
|
|
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
|
|
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
|
|
obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
|
|
obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/
|
|
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
|
|
obj-$(CONFIG_FB_PS3) += ps3fb.o
|
|
obj-$(CONFIG_FB_SM501) += sm501fb.o
|
|
obj-$(CONFIG_FB_XILINX) += xilinxfb.o
|
|
obj-$(CONFIG_FB_OMAP) += omap/
|
|
obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
|
|
|
|
# Platform or fallback drivers go here
|
|
obj-$(CONFIG_FB_UVESA) += uvesafb.o
|
|
obj-$(CONFIG_FB_VESA) += vesafb.o
|
|
obj-$(CONFIG_FB_IMAC) += imacfb.o
|
|
obj-$(CONFIG_FB_EFI) += efifb.o
|
|
obj-$(CONFIG_FB_VGA16) += vga16fb.o
|
|
obj-$(CONFIG_FB_OF) += offb.o
|
|
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
|
|
obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
|
|
|
|
# the test framebuffer is last
|
|
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
|
|
|
|
#video output switch sysfs driver
|
|
obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
|