linux/drivers/net
Shannon Nelson 9ac7726637 i40e: add switch for link polling
There's been some need for controlling the periodic link polling for
debugging link issues.  This patch enables switching it off and on
through an ethtool private flag.  The link poll remains on by default,
but can be turned off with
	ethtool --set-priv-flags p261p1 LinkPolling off
and later turned back on with
	ethtool --set-priv-flags p261p1 LinkPolling on

To check the current status, use
	ethtool --show-priv-flags p261p1

Change-ID: I32e4ab654ff3eec90a06cf144899971b82d71c40
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08 15:58:23 -07:00
..
appletalk
arcnet Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-09-26 16:08:27 -07:00
bonding bonding: use l4 hash if available 2015-09-17 21:01:05 -07:00
caif net: caif: convert to using IFF_NO_QUEUE 2015-08-18 11:55:07 -07:00
can can: flexcan: enable interrupts atomically at the end of flexcan_chip_start() 2015-09-21 08:38:23 +02:00
cris
dsa net: dsa: mv88e6xxx: remove link polling 2015-10-07 02:58:47 -07:00
ethernet i40e: add switch for link polling 2015-10-08 15:58:23 -07:00
fddi net/fddi: remove HWM_REVERSE() macro 2015-08-13 21:12:17 -07:00
fjes fjes: fix off-by-one error at fjes_hw_update_zone_task() 2015-09-17 22:34:09 -07:00
hamradio Merge branch 'x86/urgent' into x86/asm to fix up conflicts and to pick up fixes 2015-08-18 09:39:47 +02:00
hippi
hyperv flow_dissector: Add flags argument to skb_flow_dissector functions 2015-09-01 15:06:22 -07:00
ieee802154 drivers/net/ieee802154/at86rf230.c: seq_printf() now returns NULL 2015-09-21 20:41:44 -07:00
ipvlan ipv4, ipv6: Pass net into ip_local_out and ip6_local_out 2015-10-08 04:27:02 -07:00
irda net: irda: pxaficp_ir: dmaengine conversion 2015-09-28 22:32:48 -07:00
phy net: phy: bcm7xxx: Modified to use global core register defines 2015-10-08 04:45:53 -07:00
plip
ppp ipv4, ipv6: Pass net into ip_local_out and ip6_local_out 2015-10-08 04:27:02 -07:00
slip
team net: team: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
usb asix: Continue processing URB if no RX netdev buffer 2015-10-05 06:58:43 -07:00
vmxnet3 Driver: Vmxnet3: Extend register dump support 2015-09-23 15:06:27 -07:00
wan net: wan: sbni: fix device usage count 2015-09-05 17:32:53 -07:00
wimax
wireless For the current cycle, we have the following right now: 2015-10-07 04:29:18 -07:00
xen-netback xen: MFN/GFN/BFN terminology changes for 4.3-rc0 2015-09-10 16:21:11 -07:00
dummy.c net: dummy: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
eql.c
geneve.c geneve: use network byte order for destination port config parameter 2015-09-23 15:41:04 -07:00
ifb.c
Kconfig net: Add support for l3mdev ops to VRF driver 2015-09-29 20:40:33 -07:00
LICENSE.SRC
loopback.c net: loopback: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
macvlan.c macvlan: Don't segment multiple tagged packets on macvlan device 2015-08-03 14:24:49 -07:00
macvtap.c macvtap: fix TUNSETSNDBUF values > 64k 2015-09-20 22:44:39 -07:00
Makefile fjes: Introduce FUJITSU Extended Socket Network Device driver 2015-08-24 14:06:33 -07:00
mdio.c
mii.c
netconsole.c
nlmon.c net: nlmon: convert to using IFF_NO_QUEUE 2015-08-18 11:55:05 -07:00
ntb_netdev.c NTB: Add flow control to the ntb_netdev 2015-09-07 15:17:08 -04:00
rionet.c bus: subsys: update return type of ->remove_dev() to void 2015-08-05 17:08:14 -07:00
sb1000.c
Space.c
sungem_phy.c
tun.c tuntap: Don't segment multiple tagged packets on tap device 2015-08-03 14:24:50 -07:00
veth.c net: veth: enable noqueue operation by default 2015-08-18 11:55:04 -07:00
virtio_net.c virtio-net: avoid unnecessary sg initialzation 2015-08-27 15:51:45 -07:00
vrf.c dst: Pass net into dst->output 2015-10-08 04:27:03 -07:00
vxlan.c vxlan: support both IPv4 and IPv6 sockets in a single vxlan device 2015-09-26 22:40:55 -07:00
xen-netfront.c xen-netfront: always set num queues if possible 2015-09-20 21:39:21 -07:00