forked from Minki/linux
07dd40b307
The print function dev_err() is redundant because platform_get_irq() already prints an error. Eliminate the follow coccicheck warnings: ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1661:3-10: line 1661 is redundant because platform_get_irq() already prints an error ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1642:4-11: line 1642 is redundant because platform_get_irq() already prints an error ./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1679:3-10: line 1679 is redundant because platform_get_irq() already prints an error Link: https://lore.kernel.org/r/20220215020524.44268-1-yang.lee@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1827 lines
54 KiB
C
1827 lines
54 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2015 Linaro Ltd.
|
|
* Copyright (c) 2015 Hisilicon Limited.
|
|
*/
|
|
|
|
#include "hisi_sas.h"
|
|
#define DRV_NAME "hisi_sas_v1_hw"
|
|
|
|
/* global registers need init*/
|
|
#define DLVRY_QUEUE_ENABLE 0x0
|
|
#define IOST_BASE_ADDR_LO 0x8
|
|
#define IOST_BASE_ADDR_HI 0xc
|
|
#define ITCT_BASE_ADDR_LO 0x10
|
|
#define ITCT_BASE_ADDR_HI 0x14
|
|
#define BROKEN_MSG_ADDR_LO 0x18
|
|
#define BROKEN_MSG_ADDR_HI 0x1c
|
|
#define PHY_CONTEXT 0x20
|
|
#define PHY_STATE 0x24
|
|
#define PHY_PORT_NUM_MA 0x28
|
|
#define PORT_STATE 0x2c
|
|
#define PHY_CONN_RATE 0x30
|
|
#define HGC_TRANS_TASK_CNT_LIMIT 0x38
|
|
#define AXI_AHB_CLK_CFG 0x3c
|
|
#define HGC_SAS_TXFAIL_RETRY_CTRL 0x84
|
|
#define HGC_GET_ITV_TIME 0x90
|
|
#define DEVICE_MSG_WORK_MODE 0x94
|
|
#define I_T_NEXUS_LOSS_TIME 0xa0
|
|
#define BUS_INACTIVE_LIMIT_TIME 0xa8
|
|
#define REJECT_TO_OPEN_LIMIT_TIME 0xac
|
|
#define CFG_AGING_TIME 0xbc
|
|
#define CFG_AGING_TIME_ITCT_REL_OFF 0
|
|
#define CFG_AGING_TIME_ITCT_REL_MSK (0x1 << CFG_AGING_TIME_ITCT_REL_OFF)
|
|
#define HGC_DFX_CFG2 0xc0
|
|
#define FIS_LIST_BADDR_L 0xc4
|
|
#define CFG_1US_TIMER_TRSH 0xcc
|
|
#define CFG_SAS_CONFIG 0xd4
|
|
#define HGC_IOST_ECC_ADDR 0x140
|
|
#define HGC_IOST_ECC_ADDR_BAD_OFF 16
|
|
#define HGC_IOST_ECC_ADDR_BAD_MSK (0x3ff << HGC_IOST_ECC_ADDR_BAD_OFF)
|
|
#define HGC_DQ_ECC_ADDR 0x144
|
|
#define HGC_DQ_ECC_ADDR_BAD_OFF 16
|
|
#define HGC_DQ_ECC_ADDR_BAD_MSK (0xfff << HGC_DQ_ECC_ADDR_BAD_OFF)
|
|
#define HGC_INVLD_DQE_INFO 0x148
|
|
#define HGC_INVLD_DQE_INFO_DQ_OFF 0
|
|
#define HGC_INVLD_DQE_INFO_DQ_MSK (0xffff << HGC_INVLD_DQE_INFO_DQ_OFF)
|
|
#define HGC_INVLD_DQE_INFO_TYPE_OFF 16
|
|
#define HGC_INVLD_DQE_INFO_TYPE_MSK (0x1 << HGC_INVLD_DQE_INFO_TYPE_OFF)
|
|
#define HGC_INVLD_DQE_INFO_FORCE_OFF 17
|
|
#define HGC_INVLD_DQE_INFO_FORCE_MSK (0x1 << HGC_INVLD_DQE_INFO_FORCE_OFF)
|
|
#define HGC_INVLD_DQE_INFO_PHY_OFF 18
|
|
#define HGC_INVLD_DQE_INFO_PHY_MSK (0x1 << HGC_INVLD_DQE_INFO_PHY_OFF)
|
|
#define HGC_INVLD_DQE_INFO_ABORT_OFF 19
|
|
#define HGC_INVLD_DQE_INFO_ABORT_MSK (0x1 << HGC_INVLD_DQE_INFO_ABORT_OFF)
|
|
#define HGC_INVLD_DQE_INFO_IPTT_OF_OFF 20
|
|
#define HGC_INVLD_DQE_INFO_IPTT_OF_MSK (0x1 << HGC_INVLD_DQE_INFO_IPTT_OF_OFF)
|
|
#define HGC_INVLD_DQE_INFO_SSP_ERR_OFF 21
|
|
#define HGC_INVLD_DQE_INFO_SSP_ERR_MSK (0x1 << HGC_INVLD_DQE_INFO_SSP_ERR_OFF)
|
|
#define HGC_INVLD_DQE_INFO_OFL_OFF 22
|
|
#define HGC_INVLD_DQE_INFO_OFL_MSK (0x1 << HGC_INVLD_DQE_INFO_OFL_OFF)
|
|
#define HGC_ITCT_ECC_ADDR 0x150
|
|
#define HGC_ITCT_ECC_ADDR_BAD_OFF 16
|
|
#define HGC_ITCT_ECC_ADDR_BAD_MSK (0x3ff << HGC_ITCT_ECC_ADDR_BAD_OFF)
|
|
#define HGC_AXI_FIFO_ERR_INFO 0x154
|
|
#define INT_COAL_EN 0x1bc
|
|
#define OQ_INT_COAL_TIME 0x1c0
|
|
#define OQ_INT_COAL_CNT 0x1c4
|
|
#define ENT_INT_COAL_TIME 0x1c8
|
|
#define ENT_INT_COAL_CNT 0x1cc
|
|
#define OQ_INT_SRC 0x1d0
|
|
#define OQ_INT_SRC_MSK 0x1d4
|
|
#define ENT_INT_SRC1 0x1d8
|
|
#define ENT_INT_SRC2 0x1dc
|
|
#define ENT_INT_SRC2_DQ_CFG_ERR_OFF 25
|
|
#define ENT_INT_SRC2_DQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_DQ_CFG_ERR_OFF)
|
|
#define ENT_INT_SRC2_CQ_CFG_ERR_OFF 27
|
|
#define ENT_INT_SRC2_CQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_CQ_CFG_ERR_OFF)
|
|
#define ENT_INT_SRC2_AXI_WRONG_INT_OFF 28
|
|
#define ENT_INT_SRC2_AXI_WRONG_INT_MSK (0x1 << ENT_INT_SRC2_AXI_WRONG_INT_OFF)
|
|
#define ENT_INT_SRC2_AXI_OVERLF_INT_OFF 29
|
|
#define ENT_INT_SRC2_AXI_OVERLF_INT_MSK (0x1 << ENT_INT_SRC2_AXI_OVERLF_INT_OFF)
|
|
#define ENT_INT_SRC_MSK1 0x1e0
|
|
#define ENT_INT_SRC_MSK2 0x1e4
|
|
#define SAS_ECC_INTR 0x1e8
|
|
#define SAS_ECC_INTR_DQ_ECC1B_OFF 0
|
|
#define SAS_ECC_INTR_DQ_ECC1B_MSK (0x1 << SAS_ECC_INTR_DQ_ECC1B_OFF)
|
|
#define SAS_ECC_INTR_DQ_ECCBAD_OFF 1
|
|
#define SAS_ECC_INTR_DQ_ECCBAD_MSK (0x1 << SAS_ECC_INTR_DQ_ECCBAD_OFF)
|
|
#define SAS_ECC_INTR_IOST_ECC1B_OFF 2
|
|
#define SAS_ECC_INTR_IOST_ECC1B_MSK (0x1 << SAS_ECC_INTR_IOST_ECC1B_OFF)
|
|
#define SAS_ECC_INTR_IOST_ECCBAD_OFF 3
|
|
#define SAS_ECC_INTR_IOST_ECCBAD_MSK (0x1 << SAS_ECC_INTR_IOST_ECCBAD_OFF)
|
|
#define SAS_ECC_INTR_ITCT_ECC1B_OFF 4
|
|
#define SAS_ECC_INTR_ITCT_ECC1B_MSK (0x1 << SAS_ECC_INTR_ITCT_ECC1B_OFF)
|
|
#define SAS_ECC_INTR_ITCT_ECCBAD_OFF 5
|
|
#define SAS_ECC_INTR_ITCT_ECCBAD_MSK (0x1 << SAS_ECC_INTR_ITCT_ECCBAD_OFF)
|
|
#define SAS_ECC_INTR_MSK 0x1ec
|
|
#define HGC_ERR_STAT_EN 0x238
|
|
#define DLVRY_Q_0_BASE_ADDR_LO 0x260
|
|
#define DLVRY_Q_0_BASE_ADDR_HI 0x264
|
|
#define DLVRY_Q_0_DEPTH 0x268
|
|
#define DLVRY_Q_0_WR_PTR 0x26c
|
|
#define DLVRY_Q_0_RD_PTR 0x270
|
|
#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
|
|
#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
|
|
#define COMPL_Q_0_DEPTH 0x4e8
|
|
#define COMPL_Q_0_WR_PTR 0x4ec
|
|
#define COMPL_Q_0_RD_PTR 0x4f0
|
|
#define HGC_ECC_ERR 0x7d0
|
|
|
|
/* phy registers need init */
|
|
#define PORT_BASE (0x800)
|
|
|
|
#define PHY_CFG (PORT_BASE + 0x0)
|
|
#define PHY_CFG_ENA_OFF 0
|
|
#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
|
|
#define PHY_CFG_DC_OPT_OFF 2
|
|
#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
|
|
#define PROG_PHY_LINK_RATE (PORT_BASE + 0xc)
|
|
#define PROG_PHY_LINK_RATE_MAX_OFF 0
|
|
#define PROG_PHY_LINK_RATE_MAX_MSK (0xf << PROG_PHY_LINK_RATE_MAX_OFF)
|
|
#define PROG_PHY_LINK_RATE_MIN_OFF 4
|
|
#define PROG_PHY_LINK_RATE_MIN_MSK (0xf << PROG_PHY_LINK_RATE_MIN_OFF)
|
|
#define PROG_PHY_LINK_RATE_OOB_OFF 8
|
|
#define PROG_PHY_LINK_RATE_OOB_MSK (0xf << PROG_PHY_LINK_RATE_OOB_OFF)
|
|
#define PHY_CTRL (PORT_BASE + 0x14)
|
|
#define PHY_CTRL_RESET_OFF 0
|
|
#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
|
|
#define PHY_RATE_NEGO (PORT_BASE + 0x30)
|
|
#define PHY_PCN (PORT_BASE + 0x44)
|
|
#define SL_TOUT_CFG (PORT_BASE + 0x8c)
|
|
#define SL_CONTROL (PORT_BASE + 0x94)
|
|
#define SL_CONTROL_NOTIFY_EN_OFF 0
|
|
#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
|
|
#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
|
|
#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
|
|
#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
|
|
#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
|
|
#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
|
|
#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
|
|
#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
|
|
#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
|
|
#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
|
|
#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
|
|
#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0)
|
|
#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4)
|
|
#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8)
|
|
#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc)
|
|
#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
|
|
#define DONE_RECEIVED_TIME (PORT_BASE + 0x12c)
|
|
#define CON_CFG_DRIVER (PORT_BASE + 0x130)
|
|
#define PHY_CONFIG2 (PORT_BASE + 0x1a8)
|
|
#define PHY_CONFIG2_FORCE_TXDEEMPH_OFF 3
|
|
#define PHY_CONFIG2_FORCE_TXDEEMPH_MSK (0x1 << PHY_CONFIG2_FORCE_TXDEEMPH_OFF)
|
|
#define PHY_CONFIG2_TX_TRAIN_COMP_OFF 24
|
|
#define PHY_CONFIG2_TX_TRAIN_COMP_MSK (0x1 << PHY_CONFIG2_TX_TRAIN_COMP_OFF)
|
|
#define CHL_INT0 (PORT_BASE + 0x1b0)
|
|
#define CHL_INT0_PHYCTRL_NOTRDY_OFF 0
|
|
#define CHL_INT0_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_PHYCTRL_NOTRDY_OFF)
|
|
#define CHL_INT0_SN_FAIL_NGR_OFF 2
|
|
#define CHL_INT0_SN_FAIL_NGR_MSK (0x1 << CHL_INT0_SN_FAIL_NGR_OFF)
|
|
#define CHL_INT0_DWS_LOST_OFF 4
|
|
#define CHL_INT0_DWS_LOST_MSK (0x1 << CHL_INT0_DWS_LOST_OFF)
|
|
#define CHL_INT0_SL_IDAF_FAIL_OFF 10
|
|
#define CHL_INT0_SL_IDAF_FAIL_MSK (0x1 << CHL_INT0_SL_IDAF_FAIL_OFF)
|
|
#define CHL_INT0_ID_TIMEOUT_OFF 11
|
|
#define CHL_INT0_ID_TIMEOUT_MSK (0x1 << CHL_INT0_ID_TIMEOUT_OFF)
|
|
#define CHL_INT0_SL_OPAF_FAIL_OFF 12
|
|
#define CHL_INT0_SL_OPAF_FAIL_MSK (0x1 << CHL_INT0_SL_OPAF_FAIL_OFF)
|
|
#define CHL_INT0_SL_PS_FAIL_OFF 21
|
|
#define CHL_INT0_SL_PS_FAIL_MSK (0x1 << CHL_INT0_SL_PS_FAIL_OFF)
|
|
#define CHL_INT1 (PORT_BASE + 0x1b4)
|
|
#define CHL_INT2 (PORT_BASE + 0x1b8)
|
|
#define CHL_INT2_SL_RX_BC_ACK_OFF 2
|
|
#define CHL_INT2_SL_RX_BC_ACK_MSK (0x1 << CHL_INT2_SL_RX_BC_ACK_OFF)
|
|
#define CHL_INT2_SL_PHY_ENA_OFF 6
|
|
#define CHL_INT2_SL_PHY_ENA_MSK (0x1 << CHL_INT2_SL_PHY_ENA_OFF)
|
|
#define CHL_INT0_MSK (PORT_BASE + 0x1bc)
|
|
#define CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF 0
|
|
#define CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF)
|
|
#define CHL_INT1_MSK (PORT_BASE + 0x1c0)
|
|
#define CHL_INT2_MSK (PORT_BASE + 0x1c4)
|
|
#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
|
|
#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
|
|
#define DMA_TX_STATUS_BUSY_OFF 0
|
|
#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
|
|
#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
|
|
#define DMA_RX_STATUS_BUSY_OFF 0
|
|
#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
|
|
|
|
#define AXI_CFG 0x5100
|
|
#define RESET_VALUE 0x7ffff
|
|
|
|
/* HW dma structures */
|
|
/* Delivery queue header */
|
|
/* dw0 */
|
|
#define CMD_HDR_RESP_REPORT_OFF 5
|
|
#define CMD_HDR_RESP_REPORT_MSK 0x20
|
|
#define CMD_HDR_TLR_CTRL_OFF 6
|
|
#define CMD_HDR_TLR_CTRL_MSK 0xc0
|
|
#define CMD_HDR_PORT_OFF 17
|
|
#define CMD_HDR_PORT_MSK 0xe0000
|
|
#define CMD_HDR_PRIORITY_OFF 27
|
|
#define CMD_HDR_PRIORITY_MSK 0x8000000
|
|
#define CMD_HDR_MODE_OFF 28
|
|
#define CMD_HDR_MODE_MSK 0x10000000
|
|
#define CMD_HDR_CMD_OFF 29
|
|
#define CMD_HDR_CMD_MSK 0xe0000000
|
|
/* dw1 */
|
|
#define CMD_HDR_VERIFY_DTL_OFF 10
|
|
#define CMD_HDR_VERIFY_DTL_MSK 0x400
|
|
#define CMD_HDR_SSP_FRAME_TYPE_OFF 13
|
|
#define CMD_HDR_SSP_FRAME_TYPE_MSK 0xe000
|
|
#define CMD_HDR_DEVICE_ID_OFF 16
|
|
#define CMD_HDR_DEVICE_ID_MSK 0xffff0000
|
|
/* dw2 */
|
|
#define CMD_HDR_CFL_OFF 0
|
|
#define CMD_HDR_CFL_MSK 0x1ff
|
|
#define CMD_HDR_MRFL_OFF 15
|
|
#define CMD_HDR_MRFL_MSK 0xff8000
|
|
#define CMD_HDR_FIRST_BURST_OFF 25
|
|
#define CMD_HDR_FIRST_BURST_MSK 0x2000000
|
|
/* dw3 */
|
|
#define CMD_HDR_IPTT_OFF 0
|
|
#define CMD_HDR_IPTT_MSK 0xffff
|
|
/* dw6 */
|
|
#define CMD_HDR_DATA_SGL_LEN_OFF 16
|
|
#define CMD_HDR_DATA_SGL_LEN_MSK 0xffff0000
|
|
|
|
/* Completion header */
|
|
#define CMPLT_HDR_IPTT_OFF 0
|
|
#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
|
|
#define CMPLT_HDR_CMD_CMPLT_OFF 17
|
|
#define CMPLT_HDR_CMD_CMPLT_MSK (0x1 << CMPLT_HDR_CMD_CMPLT_OFF)
|
|
#define CMPLT_HDR_ERR_RCRD_XFRD_OFF 18
|
|
#define CMPLT_HDR_ERR_RCRD_XFRD_MSK (0x1 << CMPLT_HDR_ERR_RCRD_XFRD_OFF)
|
|
#define CMPLT_HDR_RSPNS_XFRD_OFF 19
|
|
#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
|
|
#define CMPLT_HDR_IO_CFG_ERR_OFF 27
|
|
#define CMPLT_HDR_IO_CFG_ERR_MSK (0x1 << CMPLT_HDR_IO_CFG_ERR_OFF)
|
|
|
|
/* ITCT header */
|
|
/* qw0 */
|
|
#define ITCT_HDR_DEV_TYPE_OFF 0
|
|
#define ITCT_HDR_DEV_TYPE_MSK (0x3ULL << ITCT_HDR_DEV_TYPE_OFF)
|
|
#define ITCT_HDR_VALID_OFF 2
|
|
#define ITCT_HDR_VALID_MSK (0x1ULL << ITCT_HDR_VALID_OFF)
|
|
#define ITCT_HDR_AWT_CONTROL_OFF 4
|
|
#define ITCT_HDR_AWT_CONTROL_MSK (0x1ULL << ITCT_HDR_AWT_CONTROL_OFF)
|
|
#define ITCT_HDR_MAX_CONN_RATE_OFF 5
|
|
#define ITCT_HDR_MAX_CONN_RATE_MSK (0xfULL << ITCT_HDR_MAX_CONN_RATE_OFF)
|
|
#define ITCT_HDR_VALID_LINK_NUM_OFF 9
|
|
#define ITCT_HDR_VALID_LINK_NUM_MSK (0xfULL << ITCT_HDR_VALID_LINK_NUM_OFF)
|
|
#define ITCT_HDR_PORT_ID_OFF 13
|
|
#define ITCT_HDR_PORT_ID_MSK (0x7ULL << ITCT_HDR_PORT_ID_OFF)
|
|
#define ITCT_HDR_SMP_TIMEOUT_OFF 16
|
|
#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffffULL << ITCT_HDR_SMP_TIMEOUT_OFF)
|
|
/* qw1 */
|
|
#define ITCT_HDR_MAX_SAS_ADDR_OFF 0
|
|
#define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \
|
|
ITCT_HDR_MAX_SAS_ADDR_OFF)
|
|
/* qw2 */
|
|
#define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0
|
|
#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffffULL << \
|
|
ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
|
|
#define ITCT_HDR_BUS_INACTIVE_TL_OFF 16
|
|
#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffffULL << \
|
|
ITCT_HDR_BUS_INACTIVE_TL_OFF)
|
|
#define ITCT_HDR_MAX_CONN_TL_OFF 32
|
|
#define ITCT_HDR_MAX_CONN_TL_MSK (0xffffULL << \
|
|
ITCT_HDR_MAX_CONN_TL_OFF)
|
|
#define ITCT_HDR_REJ_OPEN_TL_OFF 48
|
|
#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffffULL << \
|
|
ITCT_HDR_REJ_OPEN_TL_OFF)
|
|
|
|
/* Err record header */
|
|
#define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0
|
|
#define ERR_HDR_DMA_TX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_TX_ERR_TYPE_OFF)
|
|
#define ERR_HDR_DMA_RX_ERR_TYPE_OFF 16
|
|
#define ERR_HDR_DMA_RX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_RX_ERR_TYPE_OFF)
|
|
|
|
struct hisi_sas_complete_v1_hdr {
|
|
__le32 data;
|
|
};
|
|
|
|
struct hisi_sas_err_record_v1 {
|
|
/* dw0 */
|
|
__le32 dma_err_type;
|
|
|
|
/* dw1 */
|
|
__le32 trans_tx_fail_type;
|
|
|
|
/* dw2 */
|
|
__le32 trans_rx_fail_type;
|
|
|
|
/* dw3 */
|
|
u32 rsvd;
|
|
};
|
|
|
|
enum {
|
|
HISI_SAS_PHY_BCAST_ACK = 0,
|
|
HISI_SAS_PHY_SL_PHY_ENABLED,
|
|
HISI_SAS_PHY_INT_ABNORMAL,
|
|
HISI_SAS_PHY_INT_NR
|
|
};
|
|
|
|
enum {
|
|
DMA_TX_ERR_BASE = 0x0,
|
|
DMA_RX_ERR_BASE = 0x100,
|
|
TRANS_TX_FAIL_BASE = 0x200,
|
|
TRANS_RX_FAIL_BASE = 0x300,
|
|
|
|
/* dma tx */
|
|
DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x0 */
|
|
DMA_TX_DIF_APP_ERR, /* 0x1 */
|
|
DMA_TX_DIF_RPP_ERR, /* 0x2 */
|
|
DMA_TX_AXI_BUS_ERR, /* 0x3 */
|
|
DMA_TX_DATA_SGL_OVERFLOW_ERR, /* 0x4 */
|
|
DMA_TX_DIF_SGL_OVERFLOW_ERR, /* 0x5 */
|
|
DMA_TX_UNEXP_XFER_RDY_ERR, /* 0x6 */
|
|
DMA_TX_XFER_RDY_OFFSET_ERR, /* 0x7 */
|
|
DMA_TX_DATA_UNDERFLOW_ERR, /* 0x8 */
|
|
DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR, /* 0x9 */
|
|
|
|
/* dma rx */
|
|
DMA_RX_BUFFER_ECC_ERR = DMA_RX_ERR_BASE, /* 0x100 */
|
|
DMA_RX_DIF_CRC_ERR, /* 0x101 */
|
|
DMA_RX_DIF_APP_ERR, /* 0x102 */
|
|
DMA_RX_DIF_RPP_ERR, /* 0x103 */
|
|
DMA_RX_RESP_BUFFER_OVERFLOW_ERR, /* 0x104 */
|
|
DMA_RX_AXI_BUS_ERR, /* 0x105 */
|
|
DMA_RX_DATA_SGL_OVERFLOW_ERR, /* 0x106 */
|
|
DMA_RX_DIF_SGL_OVERFLOW_ERR, /* 0x107 */
|
|
DMA_RX_DATA_OFFSET_ERR, /* 0x108 */
|
|
DMA_RX_UNEXP_RX_DATA_ERR, /* 0x109 */
|
|
DMA_RX_DATA_OVERFLOW_ERR, /* 0x10a */
|
|
DMA_RX_DATA_UNDERFLOW_ERR, /* 0x10b */
|
|
DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x10c */
|
|
|
|
/* trans tx */
|
|
TRANS_TX_RSVD0_ERR = TRANS_TX_FAIL_BASE, /* 0x200 */
|
|
TRANS_TX_PHY_NOT_ENABLE_ERR, /* 0x201 */
|
|
TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR, /* 0x202 */
|
|
TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR, /* 0x203 */
|
|
TRANS_TX_OPEN_REJCT_BY_OTHER_ERR, /* 0x204 */
|
|
TRANS_TX_RSVD1_ERR, /* 0x205 */
|
|
TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR, /* 0x206 */
|
|
TRANS_TX_OPEN_REJCT_STP_BUSY_ERR, /* 0x207 */
|
|
TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR, /* 0x208 */
|
|
TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR, /* 0x209 */
|
|
TRANS_TX_OPEN_REJCT_BAD_DEST_ERR, /* 0x20a */
|
|
TRANS_TX_OPEN_BREAK_RECEIVE_ERR, /* 0x20b */
|
|
TRANS_TX_LOW_PHY_POWER_ERR, /* 0x20c */
|
|
TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR, /* 0x20d */
|
|
TRANS_TX_OPEN_TIMEOUT_ERR, /* 0x20e */
|
|
TRANS_TX_OPEN_REJCT_NO_DEST_ERR, /* 0x20f */
|
|
TRANS_TX_OPEN_RETRY_ERR, /* 0x210 */
|
|
TRANS_TX_RSVD2_ERR, /* 0x211 */
|
|
TRANS_TX_BREAK_TIMEOUT_ERR, /* 0x212 */
|
|
TRANS_TX_BREAK_REQUEST_ERR, /* 0x213 */
|
|
TRANS_TX_BREAK_RECEIVE_ERR, /* 0x214 */
|
|
TRANS_TX_CLOSE_TIMEOUT_ERR, /* 0x215 */
|
|
TRANS_TX_CLOSE_NORMAL_ERR, /* 0x216 */
|
|
TRANS_TX_CLOSE_PHYRESET_ERR, /* 0x217 */
|
|
TRANS_TX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x218 */
|
|
TRANS_TX_WITH_CLOSE_COMINIT_ERR, /* 0x219 */
|
|
TRANS_TX_NAK_RECEIVE_ERR, /* 0x21a */
|
|
TRANS_TX_ACK_NAK_TIMEOUT_ERR, /* 0x21b */
|
|
TRANS_TX_CREDIT_TIMEOUT_ERR, /* 0x21c */
|
|
TRANS_TX_IPTT_CONFLICT_ERR, /* 0x21d */
|
|
TRANS_TX_TXFRM_TYPE_ERR, /* 0x21e */
|
|
TRANS_TX_TXSMP_LENGTH_ERR, /* 0x21f */
|
|
|
|
/* trans rx */
|
|
TRANS_RX_FRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x300 */
|
|
TRANS_RX_FRAME_DONE_ERR, /* 0x301 */
|
|
TRANS_RX_FRAME_ERRPRM_ERR, /* 0x302 */
|
|
TRANS_RX_FRAME_NO_CREDIT_ERR, /* 0x303 */
|
|
TRANS_RX_RSVD0_ERR, /* 0x304 */
|
|
TRANS_RX_FRAME_OVERRUN_ERR, /* 0x305 */
|
|
TRANS_RX_FRAME_NO_EOF_ERR, /* 0x306 */
|
|
TRANS_RX_LINK_BUF_OVERRUN_ERR, /* 0x307 */
|
|
TRANS_RX_BREAK_TIMEOUT_ERR, /* 0x308 */
|
|
TRANS_RX_BREAK_REQUEST_ERR, /* 0x309 */
|
|
TRANS_RX_BREAK_RECEIVE_ERR, /* 0x30a */
|
|
TRANS_RX_CLOSE_TIMEOUT_ERR, /* 0x30b */
|
|
TRANS_RX_CLOSE_NORMAL_ERR, /* 0x30c */
|
|
TRANS_RX_CLOSE_PHYRESET_ERR, /* 0x30d */
|
|
TRANS_RX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x30e */
|
|
TRANS_RX_WITH_CLOSE_COMINIT_ERR, /* 0x30f */
|
|
TRANS_RX_DATA_LENGTH0_ERR, /* 0x310 */
|
|
TRANS_RX_BAD_HASH_ERR, /* 0x311 */
|
|
TRANS_RX_XRDY_ZERO_ERR, /* 0x312 */
|
|
TRANS_RX_SSP_FRAME_LEN_ERR, /* 0x313 */
|
|
TRANS_RX_TRANS_RX_RSVD1_ERR, /* 0x314 */
|
|
TRANS_RX_NO_BALANCE_ERR, /* 0x315 */
|
|
TRANS_RX_TRANS_RX_RSVD2_ERR, /* 0x316 */
|
|
TRANS_RX_TRANS_RX_RSVD3_ERR, /* 0x317 */
|
|
TRANS_RX_BAD_FRAME_TYPE_ERR, /* 0x318 */
|
|
TRANS_RX_SMP_FRAME_LEN_ERR, /* 0x319 */
|
|
TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x31a */
|
|
};
|
|
|
|
#define HISI_SAS_PHY_MAX_INT_NR (HISI_SAS_PHY_INT_NR * HISI_SAS_MAX_PHYS)
|
|
#define HISI_SAS_CQ_MAX_INT_NR (HISI_SAS_MAX_QUEUES)
|
|
#define HISI_SAS_FATAL_INT_NR (2)
|
|
|
|
#define HISI_SAS_MAX_INT_NR \
|
|
(HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
|
|
HISI_SAS_FATAL_INT_NR)
|
|
|
|
static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
return readl(regs);
|
|
}
|
|
|
|
static void hisi_sas_write32(struct hisi_hba *hisi_hba,
|
|
u32 off, u32 val)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + off;
|
|
|
|
writel(val, regs);
|
|
}
|
|
|
|
static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba,
|
|
int phy_no, u32 off, u32 val)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
|
|
|
|
writel(val, regs);
|
|
}
|
|
|
|
static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
|
|
int phy_no, u32 off)
|
|
{
|
|
void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
|
|
|
|
return readl(regs);
|
|
}
|
|
|
|
static void config_phy_opt_mode_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg &= ~PHY_CFG_DC_OPT_MSK;
|
|
cfg |= 1 << PHY_CFG_DC_OPT_OFF;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void config_tx_tfe_autoneg_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CONFIG2);
|
|
|
|
cfg &= ~PHY_CONFIG2_FORCE_TXDEEMPH_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CONFIG2, cfg);
|
|
}
|
|
|
|
static void config_id_frame_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
struct sas_identify_frame identify_frame;
|
|
u32 *identify_buffer;
|
|
|
|
memset(&identify_frame, 0, sizeof(identify_frame));
|
|
identify_frame.dev_type = SAS_END_DEVICE;
|
|
identify_frame.frame_type = 0;
|
|
identify_frame._un1 = 1;
|
|
identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
|
|
identify_frame.target_bits = SAS_PROTOCOL_NONE;
|
|
memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
|
|
memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
|
|
identify_frame.phy_id = phy_no;
|
|
identify_buffer = (u32 *)(&identify_frame);
|
|
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
|
|
__swab32(identify_buffer[0]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
|
|
__swab32(identify_buffer[1]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
|
|
__swab32(identify_buffer[2]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
|
|
__swab32(identify_buffer[3]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
|
|
__swab32(identify_buffer[4]));
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
|
|
__swab32(identify_buffer[5]));
|
|
}
|
|
|
|
static void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_device *sas_dev)
|
|
{
|
|
struct domain_device *device = sas_dev->sas_device;
|
|
struct device *dev = hisi_hba->dev;
|
|
u64 qw0, device_id = sas_dev->device_id;
|
|
struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
|
|
struct asd_sas_port *sas_port = device->port;
|
|
struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
|
|
u64 sas_addr;
|
|
|
|
memset(itct, 0, sizeof(*itct));
|
|
|
|
/* qw0 */
|
|
qw0 = 0;
|
|
switch (sas_dev->dev_type) {
|
|
case SAS_END_DEVICE:
|
|
case SAS_EDGE_EXPANDER_DEVICE:
|
|
case SAS_FANOUT_EXPANDER_DEVICE:
|
|
qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
|
|
break;
|
|
default:
|
|
dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
|
|
sas_dev->dev_type);
|
|
}
|
|
|
|
qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
|
|
(1 << ITCT_HDR_AWT_CONTROL_OFF) |
|
|
(device->max_linkrate << ITCT_HDR_MAX_CONN_RATE_OFF) |
|
|
(1 << ITCT_HDR_VALID_LINK_NUM_OFF) |
|
|
(port->id << ITCT_HDR_PORT_ID_OFF));
|
|
itct->qw0 = cpu_to_le64(qw0);
|
|
|
|
/* qw1 */
|
|
memcpy(&sas_addr, device->sas_addr, SAS_ADDR_SIZE);
|
|
itct->sas_addr = cpu_to_le64(__swab64(sas_addr));
|
|
|
|
/* qw2 */
|
|
itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
|
|
(0xff00ULL << ITCT_HDR_BUS_INACTIVE_TL_OFF) |
|
|
(0xff00ULL << ITCT_HDR_MAX_CONN_TL_OFF) |
|
|
(0xff00ULL << ITCT_HDR_REJ_OPEN_TL_OFF));
|
|
}
|
|
|
|
static int clear_itct_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_device *sas_dev)
|
|
{
|
|
u64 dev_id = sas_dev->device_id;
|
|
struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
|
|
u64 qw0;
|
|
u32 reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
|
|
|
|
reg_val |= CFG_AGING_TIME_ITCT_REL_MSK;
|
|
hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
|
|
|
|
/* free itct */
|
|
udelay(1);
|
|
reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
|
|
reg_val &= ~CFG_AGING_TIME_ITCT_REL_MSK;
|
|
hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
|
|
|
|
qw0 = le64_to_cpu(itct->qw0);
|
|
qw0 &= ~ITCT_HDR_VALID_MSK;
|
|
itct->qw0 = cpu_to_le64(qw0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
unsigned long end_time;
|
|
u32 val;
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
u32 phy_ctrl = hisi_sas_phy_read32(hisi_hba, i, PHY_CTRL);
|
|
|
|
phy_ctrl |= PHY_CTRL_RESET_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, phy_ctrl);
|
|
}
|
|
msleep(1); /* It is safe to wait for 50us */
|
|
|
|
/* Ensure DMA tx & rx idle */
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
u32 dma_tx_status, dma_rx_status;
|
|
|
|
end_time = jiffies + msecs_to_jiffies(1000);
|
|
|
|
while (1) {
|
|
dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
|
|
DMA_TX_STATUS);
|
|
dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
|
|
DMA_RX_STATUS);
|
|
|
|
if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
|
|
!(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
|
|
break;
|
|
|
|
msleep(20);
|
|
if (time_after(jiffies, end_time))
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
/* Ensure axi bus idle */
|
|
end_time = jiffies + msecs_to_jiffies(1000);
|
|
while (1) {
|
|
u32 axi_status =
|
|
hisi_sas_read32(hisi_hba, AXI_CFG);
|
|
|
|
if (axi_status == 0)
|
|
break;
|
|
|
|
msleep(20);
|
|
if (time_after(jiffies, end_time))
|
|
return -EIO;
|
|
}
|
|
|
|
if (ACPI_HANDLE(dev)) {
|
|
acpi_status s;
|
|
|
|
s = acpi_evaluate_object(ACPI_HANDLE(dev), "_RST", NULL, NULL);
|
|
if (ACPI_FAILURE(s)) {
|
|
dev_err(dev, "Reset failed\n");
|
|
return -EIO;
|
|
}
|
|
} else if (hisi_hba->ctrl) {
|
|
/* Apply reset and disable clock */
|
|
/* clk disable reg is offset by +4 bytes from clk enable reg */
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
|
|
RESET_VALUE);
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
|
|
RESET_VALUE);
|
|
msleep(1);
|
|
regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
|
|
if (RESET_VALUE != (val & RESET_VALUE)) {
|
|
dev_err(dev, "Reset failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* De-reset and enable clock */
|
|
/* deassert rst reg is offset by +4 bytes from assert reg */
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
|
|
RESET_VALUE);
|
|
regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
|
|
RESET_VALUE);
|
|
msleep(1);
|
|
regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
|
|
if (val & RESET_VALUE) {
|
|
dev_err(dev, "De-reset failed\n");
|
|
return -EIO;
|
|
}
|
|
} else {
|
|
dev_warn(dev, "no reset method\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void init_reg_v1_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
|
|
/* Global registers init*/
|
|
hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
|
|
(u32)((1ULL << hisi_hba->queue_count) - 1));
|
|
hisi_sas_write32(hisi_hba, HGC_TRANS_TASK_CNT_LIMIT, 0x11);
|
|
hisi_sas_write32(hisi_hba, DEVICE_MSG_WORK_MODE, 0x1);
|
|
hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x1ff);
|
|
hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x401);
|
|
hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0x64);
|
|
hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x64);
|
|
hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x2710);
|
|
hisi_sas_write32(hisi_hba, REJECT_TO_OPEN_LIMIT_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x7a12);
|
|
hisi_sas_write32(hisi_hba, HGC_DFX_CFG2, 0x9c40);
|
|
hisi_sas_write32(hisi_hba, FIS_LIST_BADDR_L, 0x2);
|
|
hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x186a0);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 1);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC_MSK, 0);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0);
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0);
|
|
hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 0x2);
|
|
hisi_sas_write32(hisi_hba, CFG_SAS_CONFIG, 0x22000000);
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x88a);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_CONFIG2, 0x7c080);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_RATE_NEGO, 0x415ee00);
|
|
hisi_sas_phy_write32(hisi_hba, i, PHY_PCN, 0x80a80000);
|
|
hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
|
|
hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x0);
|
|
hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
|
|
hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0);
|
|
hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x13f0a);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 3);
|
|
hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 8);
|
|
}
|
|
|
|
for (i = 0; i < hisi_hba->queue_count; i++) {
|
|
/* Delivery queue */
|
|
hisi_sas_write32(hisi_hba,
|
|
DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
|
|
upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba,
|
|
DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
|
|
lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba,
|
|
DLVRY_Q_0_DEPTH + (i * 0x14),
|
|
HISI_SAS_QUEUE_SLOTS);
|
|
|
|
/* Completion queue */
|
|
hisi_sas_write32(hisi_hba,
|
|
COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
|
|
upper_32_bits(hisi_hba->complete_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba,
|
|
COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
|
|
lower_32_bits(hisi_hba->complete_hdr_dma[i]));
|
|
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
|
|
HISI_SAS_QUEUE_SLOTS);
|
|
}
|
|
|
|
/* itct */
|
|
hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->itct_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->itct_dma));
|
|
|
|
/* iost */
|
|
hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
|
|
lower_32_bits(hisi_hba->iost_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
|
|
upper_32_bits(hisi_hba->iost_dma));
|
|
|
|
/* breakpoint */
|
|
hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_LO,
|
|
lower_32_bits(hisi_hba->breakpoint_dma));
|
|
|
|
hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_HI,
|
|
upper_32_bits(hisi_hba->breakpoint_dma));
|
|
}
|
|
|
|
static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct device *dev = hisi_hba->dev;
|
|
int rc;
|
|
|
|
rc = reset_hw_v1_hw(hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "hisi_sas_reset_hw failed, rc=%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
msleep(100);
|
|
init_reg_v1_hw(hisi_hba);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg |= PHY_CFG_ENA_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
|
|
|
|
cfg &= ~PHY_CFG_ENA_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
|
|
}
|
|
|
|
static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
config_id_frame_v1_hw(hisi_hba, phy_no);
|
|
config_phy_opt_mode_v1_hw(hisi_hba, phy_no);
|
|
config_tx_tfe_autoneg_v1_hw(hisi_hba, phy_no);
|
|
enable_phy_v1_hw(hisi_hba, phy_no);
|
|
}
|
|
|
|
static void phy_hard_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
hisi_sas_phy_enable(hisi_hba, phy_no, 0);
|
|
msleep(100);
|
|
hisi_sas_phy_enable(hisi_hba, phy_no, 1);
|
|
}
|
|
|
|
static void start_phys_v1_hw(struct timer_list *t)
|
|
{
|
|
struct hisi_hba *hisi_hba = from_timer(hisi_hba, t, timer);
|
|
int i;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x12a);
|
|
hisi_sas_phy_enable(hisi_hba, i, 1);
|
|
}
|
|
}
|
|
|
|
static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
struct timer_list *timer = &hisi_hba->timer;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a);
|
|
hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK);
|
|
}
|
|
|
|
timer_setup(timer, start_phys_v1_hw, 0);
|
|
mod_timer(timer, jiffies + HZ);
|
|
}
|
|
|
|
static void sl_notify_ssp_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
|
|
{
|
|
u32 sl_control;
|
|
|
|
sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
|
|
msleep(1);
|
|
sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
|
|
sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
|
|
}
|
|
|
|
static enum sas_linkrate phy_get_max_linkrate_v1_hw(void)
|
|
{
|
|
return SAS_LINK_RATE_6_0_GBPS;
|
|
}
|
|
|
|
static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
|
|
struct sas_phy_linkrates *r)
|
|
{
|
|
enum sas_linkrate max = r->maximum_linkrate;
|
|
u32 prog_phy_link_rate = 0x800;
|
|
|
|
prog_phy_link_rate |= hisi_sas_get_prog_phy_linkrate_mask(max);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
|
|
prog_phy_link_rate);
|
|
}
|
|
|
|
static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
|
|
{
|
|
int i, bitmap = 0;
|
|
u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++)
|
|
if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
|
|
bitmap |= 1 << i;
|
|
|
|
return bitmap;
|
|
}
|
|
|
|
/* DQ lock must be taken here */
|
|
static void start_delivery_v1_hw(struct hisi_sas_dq *dq)
|
|
{
|
|
struct hisi_hba *hisi_hba = dq->hisi_hba;
|
|
struct hisi_sas_slot *s, *s1, *s2 = NULL;
|
|
int dlvry_queue = dq->id;
|
|
int wp;
|
|
|
|
list_for_each_entry_safe(s, s1, &dq->list, delivery) {
|
|
if (!s->ready)
|
|
break;
|
|
s2 = s;
|
|
list_del(&s->delivery);
|
|
}
|
|
|
|
if (!s2)
|
|
return;
|
|
|
|
/*
|
|
* Ensure that memories for slots built on other CPUs is observed.
|
|
*/
|
|
smp_rmb();
|
|
wp = (s2->dlvry_queue_slot + 1) % HISI_SAS_QUEUE_SLOTS;
|
|
|
|
hisi_sas_write32(hisi_hba, DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14), wp);
|
|
}
|
|
|
|
static void prep_prd_sge_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot,
|
|
struct hisi_sas_cmd_hdr *hdr,
|
|
struct scatterlist *scatter,
|
|
int n_elem)
|
|
{
|
|
struct hisi_sas_sge_page *sge_page = hisi_sas_sge_addr_mem(slot);
|
|
struct scatterlist *sg;
|
|
int i;
|
|
|
|
for_each_sg(scatter, sg, n_elem, i) {
|
|
struct hisi_sas_sge *entry = &sge_page->sge[i];
|
|
|
|
entry->addr = cpu_to_le64(sg_dma_address(sg));
|
|
entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
|
|
entry->data_len = cpu_to_le32(sg_dma_len(sg));
|
|
entry->data_off = 0;
|
|
}
|
|
|
|
hdr->prd_table_addr = cpu_to_le64(hisi_sas_sge_addr_dma(slot));
|
|
|
|
hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
|
|
}
|
|
|
|
static void prep_smp_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct domain_device *device = task->dev;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct scatterlist *sg_req;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
dma_addr_t req_dma_addr;
|
|
unsigned int req_len;
|
|
|
|
/* req */
|
|
sg_req = &task->smp_task.smp_req;
|
|
req_len = sg_dma_len(sg_req);
|
|
req_dma_addr = sg_dma_address(sg_req);
|
|
|
|
/* create header */
|
|
/* dw0 */
|
|
hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
|
|
(1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
|
|
(1 << CMD_HDR_MODE_OFF) | /* ini mode */
|
|
(2 << CMD_HDR_CMD_OFF)); /* smp */
|
|
|
|
/* map itct entry */
|
|
hdr->dw1 = cpu_to_le32(sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF);
|
|
|
|
/* dw2 */
|
|
hdr->dw2 = cpu_to_le32((((req_len-4)/4) << CMD_HDR_CFL_OFF) |
|
|
(HISI_SAS_MAX_SMP_RESP_SZ/4 <<
|
|
CMD_HDR_MRFL_OFF));
|
|
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
|
|
|
|
hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
}
|
|
|
|
static void prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
|
|
struct domain_device *device = task->dev;
|
|
struct hisi_sas_device *sas_dev = device->lldd_dev;
|
|
struct hisi_sas_port *port = slot->port;
|
|
struct sas_ssp_task *ssp_task = &task->ssp_task;
|
|
struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
|
|
struct sas_tmf_task *tmf = slot->tmf;
|
|
int has_data = 0, priority = !!tmf;
|
|
u8 *buf_cmd, fburst = 0;
|
|
u32 dw1, dw2;
|
|
|
|
/* create header */
|
|
hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
|
|
(0x2 << CMD_HDR_TLR_CTRL_OFF) |
|
|
(port->id << CMD_HDR_PORT_OFF) |
|
|
(priority << CMD_HDR_PRIORITY_OFF) |
|
|
(1 << CMD_HDR_MODE_OFF) | /* ini mode */
|
|
(1 << CMD_HDR_CMD_OFF)); /* ssp */
|
|
|
|
dw1 = 1 << CMD_HDR_VERIFY_DTL_OFF;
|
|
|
|
if (tmf) {
|
|
dw1 |= 3 << CMD_HDR_SSP_FRAME_TYPE_OFF;
|
|
} else {
|
|
switch (scsi_cmnd->sc_data_direction) {
|
|
case DMA_TO_DEVICE:
|
|
dw1 |= 2 << CMD_HDR_SSP_FRAME_TYPE_OFF;
|
|
has_data = 1;
|
|
break;
|
|
case DMA_FROM_DEVICE:
|
|
dw1 |= 1 << CMD_HDR_SSP_FRAME_TYPE_OFF;
|
|
has_data = 1;
|
|
break;
|
|
default:
|
|
dw1 |= 0 << CMD_HDR_SSP_FRAME_TYPE_OFF;
|
|
}
|
|
}
|
|
|
|
/* map itct entry */
|
|
dw1 |= sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF;
|
|
hdr->dw1 = cpu_to_le32(dw1);
|
|
|
|
if (tmf) {
|
|
dw2 = ((sizeof(struct ssp_tmf_iu) +
|
|
sizeof(struct ssp_frame_hdr)+3)/4) <<
|
|
CMD_HDR_CFL_OFF;
|
|
} else {
|
|
dw2 = ((sizeof(struct ssp_command_iu) +
|
|
sizeof(struct ssp_frame_hdr)+3)/4) <<
|
|
CMD_HDR_CFL_OFF;
|
|
}
|
|
|
|
dw2 |= (HISI_SAS_MAX_SSP_RESP_SZ/4) << CMD_HDR_MRFL_OFF;
|
|
|
|
hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
|
|
|
|
if (has_data)
|
|
prep_prd_sge_v1_hw(hisi_hba, slot, hdr, task->scatter,
|
|
slot->n_elem);
|
|
|
|
hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
|
|
hdr->cmd_table_addr = cpu_to_le64(hisi_sas_cmd_hdr_addr_dma(slot));
|
|
hdr->sts_buffer_addr = cpu_to_le64(hisi_sas_status_buf_addr_dma(slot));
|
|
|
|
buf_cmd = hisi_sas_cmd_hdr_addr_mem(slot) +
|
|
sizeof(struct ssp_frame_hdr);
|
|
if (task->ssp_task.enable_first_burst) {
|
|
fburst = (1 << 7);
|
|
dw2 |= 1 << CMD_HDR_FIRST_BURST_OFF;
|
|
}
|
|
hdr->dw2 = cpu_to_le32(dw2);
|
|
|
|
memcpy(buf_cmd, &task->ssp_task.LUN, 8);
|
|
if (!tmf) {
|
|
buf_cmd[9] = fburst | task->ssp_task.task_attr |
|
|
(task->ssp_task.task_prio << 3);
|
|
memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
|
|
task->ssp_task.cmd->cmd_len);
|
|
} else {
|
|
buf_cmd[10] = tmf->tmf;
|
|
switch (tmf->tmf) {
|
|
case TMF_ABORT_TASK:
|
|
case TMF_QUERY_TASK:
|
|
buf_cmd[12] =
|
|
(tmf->tag_of_task_to_be_managed >> 8) & 0xff;
|
|
buf_cmd[13] =
|
|
tmf->tag_of_task_to_be_managed & 0xff;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* by default, task resp is complete */
|
|
static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct sas_task *task,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct task_status_struct *ts = &task->task_status;
|
|
struct hisi_sas_err_record_v1 *err_record =
|
|
hisi_sas_status_buf_addr_mem(slot);
|
|
struct device *dev = hisi_hba->dev;
|
|
|
|
switch (task->task_proto) {
|
|
case SAS_PROTOCOL_SSP:
|
|
{
|
|
int error = -1;
|
|
u32 dma_err_type = le32_to_cpu(err_record->dma_err_type);
|
|
u32 dma_tx_err_type = ((dma_err_type &
|
|
ERR_HDR_DMA_TX_ERR_TYPE_MSK)) >>
|
|
ERR_HDR_DMA_TX_ERR_TYPE_OFF;
|
|
u32 dma_rx_err_type = ((dma_err_type &
|
|
ERR_HDR_DMA_RX_ERR_TYPE_MSK)) >>
|
|
ERR_HDR_DMA_RX_ERR_TYPE_OFF;
|
|
u32 trans_tx_fail_type =
|
|
le32_to_cpu(err_record->trans_tx_fail_type);
|
|
u32 trans_rx_fail_type =
|
|
le32_to_cpu(err_record->trans_rx_fail_type);
|
|
|
|
if (dma_tx_err_type) {
|
|
/* dma tx err */
|
|
error = ffs(dma_tx_err_type)
|
|
- 1 + DMA_TX_ERR_BASE;
|
|
} else if (dma_rx_err_type) {
|
|
/* dma rx err */
|
|
error = ffs(dma_rx_err_type)
|
|
- 1 + DMA_RX_ERR_BASE;
|
|
} else if (trans_tx_fail_type) {
|
|
/* trans tx err */
|
|
error = ffs(trans_tx_fail_type)
|
|
- 1 + TRANS_TX_FAIL_BASE;
|
|
} else if (trans_rx_fail_type) {
|
|
/* trans rx err */
|
|
error = ffs(trans_rx_fail_type)
|
|
- 1 + TRANS_RX_FAIL_BASE;
|
|
}
|
|
|
|
switch (error) {
|
|
case DMA_TX_DATA_UNDERFLOW_ERR:
|
|
case DMA_RX_DATA_UNDERFLOW_ERR:
|
|
{
|
|
ts->residual = 0;
|
|
ts->stat = SAS_DATA_UNDERRUN;
|
|
break;
|
|
}
|
|
case DMA_TX_DATA_SGL_OVERFLOW_ERR:
|
|
case DMA_TX_DIF_SGL_OVERFLOW_ERR:
|
|
case DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR:
|
|
case DMA_RX_DATA_OVERFLOW_ERR:
|
|
case TRANS_RX_FRAME_OVERRUN_ERR:
|
|
case TRANS_RX_LINK_BUF_OVERRUN_ERR:
|
|
{
|
|
ts->stat = SAS_DATA_OVERRUN;
|
|
ts->residual = 0;
|
|
break;
|
|
}
|
|
case TRANS_TX_PHY_NOT_ENABLE_ERR:
|
|
{
|
|
ts->stat = SAS_PHY_DOWN;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR:
|
|
case TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR:
|
|
case TRANS_TX_OPEN_REJCT_BY_OTHER_ERR:
|
|
case TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR:
|
|
case TRANS_TX_OPEN_REJCT_STP_BUSY_ERR:
|
|
case TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR:
|
|
case TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR:
|
|
case TRANS_TX_OPEN_REJCT_BAD_DEST_ERR:
|
|
case TRANS_TX_OPEN_BREAK_RECEIVE_ERR:
|
|
case TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR:
|
|
case TRANS_TX_OPEN_REJCT_NO_DEST_ERR:
|
|
case TRANS_TX_OPEN_RETRY_ERR:
|
|
{
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
|
|
break;
|
|
}
|
|
case TRANS_TX_OPEN_TIMEOUT_ERR:
|
|
{
|
|
ts->stat = SAS_OPEN_TO;
|
|
break;
|
|
}
|
|
case TRANS_TX_NAK_RECEIVE_ERR:
|
|
case TRANS_TX_ACK_NAK_TIMEOUT_ERR:
|
|
{
|
|
ts->stat = SAS_NAK_R_ERR;
|
|
break;
|
|
}
|
|
case TRANS_TX_CREDIT_TIMEOUT_ERR:
|
|
case TRANS_TX_CLOSE_NORMAL_ERR:
|
|
{
|
|
/* This will request a retry */
|
|
ts->stat = SAS_QUEUE_FULL;
|
|
slot->abort = 1;
|
|
break;
|
|
}
|
|
default:
|
|
{
|
|
ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
case SAS_PROTOCOL_SMP:
|
|
ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
|
|
case SAS_PROTOCOL_SATA:
|
|
case SAS_PROTOCOL_STP:
|
|
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
|
|
{
|
|
dev_err(dev, "slot err: SATA/STP not supported\n");
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
static void slot_complete_v1_hw(struct hisi_hba *hisi_hba,
|
|
struct hisi_sas_slot *slot)
|
|
{
|
|
struct sas_task *task = slot->task;
|
|
struct hisi_sas_device *sas_dev;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct task_status_struct *ts;
|
|
struct domain_device *device;
|
|
struct hisi_sas_complete_v1_hdr *complete_queue =
|
|
hisi_hba->complete_hdr[slot->cmplt_queue];
|
|
struct hisi_sas_complete_v1_hdr *complete_hdr;
|
|
unsigned long flags;
|
|
u32 cmplt_hdr_data;
|
|
|
|
complete_hdr = &complete_queue[slot->cmplt_queue_slot];
|
|
cmplt_hdr_data = le32_to_cpu(complete_hdr->data);
|
|
|
|
if (unlikely(!task || !task->lldd_task || !task->dev))
|
|
return;
|
|
|
|
ts = &task->task_status;
|
|
device = task->dev;
|
|
sas_dev = device->lldd_dev;
|
|
|
|
spin_lock_irqsave(&task->task_state_lock, flags);
|
|
task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
|
|
task->task_state_flags |= SAS_TASK_STATE_DONE;
|
|
spin_unlock_irqrestore(&task->task_state_lock, flags);
|
|
|
|
memset(ts, 0, sizeof(*ts));
|
|
ts->resp = SAS_TASK_COMPLETE;
|
|
|
|
if (unlikely(!sas_dev)) {
|
|
dev_dbg(dev, "slot complete: port has no device\n");
|
|
ts->stat = SAS_PHY_DOWN;
|
|
goto out;
|
|
}
|
|
|
|
if (cmplt_hdr_data & CMPLT_HDR_IO_CFG_ERR_MSK) {
|
|
u32 info_reg = hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_DQ_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq IPTT err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_TYPE_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq type err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_FORCE_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq force phy err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_PHY_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq phy id err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_ABORT_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq abort flag err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_IPTT_OF_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_SSP_ERR_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
if (info_reg & HGC_INVLD_DQE_INFO_OFL_MSK)
|
|
dev_err(dev, "slot complete: [%d:%d] has dq order frame len err\n",
|
|
slot->cmplt_queue, slot->cmplt_queue_slot);
|
|
|
|
ts->stat = SAS_OPEN_REJECT;
|
|
ts->open_rej_reason = SAS_OREJ_UNKNOWN;
|
|
goto out;
|
|
}
|
|
|
|
if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK &&
|
|
!(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) {
|
|
|
|
slot_err_v1_hw(hisi_hba, task, slot);
|
|
if (unlikely(slot->abort)) {
|
|
sas_task_abort(task);
|
|
return;
|
|
}
|
|
goto out;
|
|
}
|
|
|
|
switch (task->task_proto) {
|
|
case SAS_PROTOCOL_SSP:
|
|
{
|
|
struct hisi_sas_status_buffer *status_buffer =
|
|
hisi_sas_status_buf_addr_mem(slot);
|
|
struct ssp_response_iu *iu = (struct ssp_response_iu *)
|
|
&status_buffer->iu[0];
|
|
|
|
sas_ssp_task_response(dev, task, iu);
|
|
break;
|
|
}
|
|
case SAS_PROTOCOL_SMP:
|
|
{
|
|
struct scatterlist *sg_resp = &task->smp_task.smp_resp;
|
|
void *to = page_address(sg_page(sg_resp));
|
|
|
|
ts->stat = SAS_SAM_STAT_GOOD;
|
|
|
|
dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
|
|
DMA_TO_DEVICE);
|
|
memcpy(to + sg_resp->offset,
|
|
hisi_sas_status_buf_addr_mem(slot) +
|
|
sizeof(struct hisi_sas_err_record),
|
|
sg_resp->length);
|
|
break;
|
|
}
|
|
case SAS_PROTOCOL_SATA:
|
|
case SAS_PROTOCOL_STP:
|
|
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
|
|
dev_err(dev, "slot complete: SATA/STP not supported\n");
|
|
break;
|
|
|
|
default:
|
|
ts->stat = SAS_SAM_STAT_CHECK_CONDITION;
|
|
break;
|
|
}
|
|
|
|
if (!slot->port->port_attached) {
|
|
dev_err(dev, "slot complete: port %d has removed\n",
|
|
slot->port->sas_port.id);
|
|
ts->stat = SAS_PHY_DOWN;
|
|
}
|
|
|
|
out:
|
|
hisi_sas_slot_task_free(hisi_hba, task, slot);
|
|
|
|
if (task->task_done)
|
|
task->task_done(task);
|
|
}
|
|
|
|
/* Interrupts */
|
|
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
|
|
{
|
|
struct hisi_sas_phy *phy = p;
|
|
struct hisi_hba *hisi_hba = phy->hisi_hba;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
int i, phy_no = sas_phy->id;
|
|
u32 irq_value, context, port_id, link_rate;
|
|
u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
|
|
struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
|
|
irqreturn_t res = IRQ_HANDLED;
|
|
|
|
irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
|
|
if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
|
|
dev_dbg(dev, "phyup: irq_value = %x not set enable bit\n",
|
|
irq_value);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
|
|
if (context & 1 << phy_no) {
|
|
dev_err(dev, "phyup: phy%d SATA attached equipment\n",
|
|
phy_no);
|
|
goto end;
|
|
}
|
|
|
|
port_id = (hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA) >> (4 * phy_no))
|
|
& 0xf;
|
|
if (port_id == 0xf) {
|
|
dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
|
|
RX_IDAF_DWORD0 + (i * 4));
|
|
frame_rcvd[i] = __swab32(idaf);
|
|
}
|
|
|
|
/* Get the linkrate */
|
|
link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
|
|
link_rate = (link_rate >> (phy_no * 4)) & 0xf;
|
|
sas_phy->linkrate = link_rate;
|
|
sas_phy->oob_mode = SAS_OOB_MODE;
|
|
memcpy(sas_phy->attached_sas_addr,
|
|
&id->sas_addr, SAS_ADDR_SIZE);
|
|
dev_info(dev, "phyup: phy%d link_rate=%d\n",
|
|
phy_no, link_rate);
|
|
phy->port_id = port_id;
|
|
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
|
|
phy->phy_type |= PORT_TYPE_SAS;
|
|
phy->phy_attached = 1;
|
|
phy->identify.device_type = id->dev_type;
|
|
phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
|
|
if (phy->identify.device_type == SAS_END_DEVICE)
|
|
phy->identify.target_port_protocols =
|
|
SAS_PROTOCOL_SSP;
|
|
else if (phy->identify.device_type != SAS_PHY_UNUSED)
|
|
phy->identify.target_port_protocols =
|
|
SAS_PROTOCOL_SMP;
|
|
hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP);
|
|
end:
|
|
if (phy->reset_completion)
|
|
complete(phy->reset_completion);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
|
|
CHL_INT2_SL_PHY_ENA_MSK);
|
|
|
|
if (irq_value & CHL_INT2_SL_PHY_ENA_MSK) {
|
|
u32 chl_int0 = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
|
|
|
|
chl_int0 &= ~CHL_INT0_PHYCTRL_NOTRDY_MSK;
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, chl_int0);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3ce3ee);
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
static irqreturn_t int_bcast_v1_hw(int irq, void *p)
|
|
{
|
|
struct hisi_sas_phy *phy = p;
|
|
struct hisi_hba *hisi_hba = phy->hisi_hba;
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
struct device *dev = hisi_hba->dev;
|
|
int phy_no = sas_phy->id;
|
|
u32 irq_value;
|
|
irqreturn_t res = IRQ_HANDLED;
|
|
|
|
irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
|
|
|
|
if (!(irq_value & CHL_INT2_SL_RX_BC_ACK_MSK)) {
|
|
dev_err(dev, "bcast: irq_value = %x not set enable bit\n",
|
|
irq_value);
|
|
res = IRQ_NONE;
|
|
goto end;
|
|
}
|
|
|
|
if (!test_bit(HISI_SAS_RESETTING_BIT, &hisi_hba->flags))
|
|
sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
|
|
GFP_ATOMIC);
|
|
|
|
end:
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
|
|
CHL_INT2_SL_RX_BC_ACK_MSK);
|
|
|
|
return res;
|
|
}
|
|
|
|
static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
|
|
{
|
|
struct hisi_sas_phy *phy = p;
|
|
struct hisi_hba *hisi_hba = phy->hisi_hba;
|
|
struct device *dev = hisi_hba->dev;
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
u32 irq_value, irq_mask_old;
|
|
int phy_no = sas_phy->id;
|
|
|
|
/* mask_int0 */
|
|
irq_mask_old = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0_MSK);
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3fffff);
|
|
|
|
/* read int0 */
|
|
irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
|
|
|
|
if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK) {
|
|
u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
|
|
|
|
hisi_sas_phy_down(hisi_hba, phy_no,
|
|
(phy_state & 1 << phy_no) ? 1 : 0,
|
|
GFP_ATOMIC);
|
|
}
|
|
|
|
if (irq_value & CHL_INT0_ID_TIMEOUT_MSK)
|
|
dev_dbg(dev, "abnormal: ID_TIMEOUT phy%d identify timeout\n",
|
|
phy_no);
|
|
|
|
if (irq_value & CHL_INT0_DWS_LOST_MSK)
|
|
dev_dbg(dev, "abnormal: DWS_LOST phy%d dws lost\n", phy_no);
|
|
|
|
if (irq_value & CHL_INT0_SN_FAIL_NGR_MSK)
|
|
dev_dbg(dev, "abnormal: SN_FAIL_NGR phy%d sn fail ngr\n",
|
|
phy_no);
|
|
|
|
if (irq_value & CHL_INT0_SL_IDAF_FAIL_MSK ||
|
|
irq_value & CHL_INT0_SL_OPAF_FAIL_MSK)
|
|
dev_dbg(dev, "abnormal: SL_ID/OPAF_FAIL phy%d check adr frm err\n",
|
|
phy_no);
|
|
|
|
if (irq_value & CHL_INT0_SL_PS_FAIL_OFF)
|
|
dev_dbg(dev, "abnormal: SL_PS_FAIL phy%d fail\n", phy_no);
|
|
|
|
/* write to zero */
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, irq_value);
|
|
|
|
if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK)
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
|
|
0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
|
|
else
|
|
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
|
|
irq_mask_old);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
|
|
{
|
|
struct hisi_sas_cq *cq = p;
|
|
struct hisi_hba *hisi_hba = cq->hisi_hba;
|
|
struct hisi_sas_slot *slot;
|
|
int queue = cq->id;
|
|
struct hisi_sas_complete_v1_hdr *complete_queue =
|
|
(struct hisi_sas_complete_v1_hdr *)
|
|
hisi_hba->complete_hdr[queue];
|
|
u32 rd_point = cq->rd_point, wr_point;
|
|
|
|
spin_lock(&hisi_hba->lock);
|
|
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
|
|
wr_point = hisi_sas_read32(hisi_hba,
|
|
COMPL_Q_0_WR_PTR + (0x14 * queue));
|
|
|
|
while (rd_point != wr_point) {
|
|
struct hisi_sas_complete_v1_hdr *complete_hdr;
|
|
int idx;
|
|
u32 cmplt_hdr_data;
|
|
|
|
complete_hdr = &complete_queue[rd_point];
|
|
cmplt_hdr_data = le32_to_cpu(complete_hdr->data);
|
|
idx = (cmplt_hdr_data & CMPLT_HDR_IPTT_MSK) >>
|
|
CMPLT_HDR_IPTT_OFF;
|
|
slot = &hisi_hba->slot_info[idx];
|
|
|
|
/* The completion queue and queue slot index are not
|
|
* necessarily the same as the delivery queue and
|
|
* queue slot index.
|
|
*/
|
|
slot->cmplt_queue_slot = rd_point;
|
|
slot->cmplt_queue = queue;
|
|
slot_complete_v1_hw(hisi_hba, slot);
|
|
|
|
if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
|
|
rd_point = 0;
|
|
}
|
|
|
|
/* update rd_point */
|
|
cq->rd_point = rd_point;
|
|
hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
|
|
spin_unlock(&hisi_hba->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t fatal_ecc_int_v1_hw(int irq, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 ecc_int = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
|
|
|
|
if (ecc_int & SAS_ECC_INTR_DQ_ECC1B_MSK) {
|
|
u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
|
|
|
|
panic("%s: Fatal DQ 1b ECC interrupt (0x%x)\n",
|
|
dev_name(dev), ecc_err);
|
|
}
|
|
|
|
if (ecc_int & SAS_ECC_INTR_DQ_ECCBAD_MSK) {
|
|
u32 addr = (hisi_sas_read32(hisi_hba, HGC_DQ_ECC_ADDR) &
|
|
HGC_DQ_ECC_ADDR_BAD_MSK) >>
|
|
HGC_DQ_ECC_ADDR_BAD_OFF;
|
|
|
|
panic("%s: Fatal DQ RAM ECC interrupt @ 0x%08x\n",
|
|
dev_name(dev), addr);
|
|
}
|
|
|
|
if (ecc_int & SAS_ECC_INTR_IOST_ECC1B_MSK) {
|
|
u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
|
|
|
|
panic("%s: Fatal IOST 1b ECC interrupt (0x%x)\n",
|
|
dev_name(dev), ecc_err);
|
|
}
|
|
|
|
if (ecc_int & SAS_ECC_INTR_IOST_ECCBAD_MSK) {
|
|
u32 addr = (hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR) &
|
|
HGC_IOST_ECC_ADDR_BAD_MSK) >>
|
|
HGC_IOST_ECC_ADDR_BAD_OFF;
|
|
|
|
panic("%s: Fatal IOST RAM ECC interrupt @ 0x%08x\n",
|
|
dev_name(dev), addr);
|
|
}
|
|
|
|
if (ecc_int & SAS_ECC_INTR_ITCT_ECCBAD_MSK) {
|
|
u32 addr = (hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR) &
|
|
HGC_ITCT_ECC_ADDR_BAD_MSK) >>
|
|
HGC_ITCT_ECC_ADDR_BAD_OFF;
|
|
|
|
panic("%s: Fatal TCT RAM ECC interrupt @ 0x%08x\n",
|
|
dev_name(dev), addr);
|
|
}
|
|
|
|
if (ecc_int & SAS_ECC_INTR_ITCT_ECC1B_MSK) {
|
|
u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
|
|
|
|
panic("%s: Fatal ITCT 1b ECC interrupt (0x%x)\n",
|
|
dev_name(dev), ecc_err);
|
|
}
|
|
|
|
hisi_sas_write32(hisi_hba, SAS_ECC_INTR, ecc_int | 0x3f);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t fatal_axi_int_v1_hw(int irq, void *p)
|
|
{
|
|
struct hisi_hba *hisi_hba = p;
|
|
struct device *dev = hisi_hba->dev;
|
|
u32 axi_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC2);
|
|
u32 axi_info = hisi_sas_read32(hisi_hba, HGC_AXI_FIFO_ERR_INFO);
|
|
|
|
if (axi_int & ENT_INT_SRC2_DQ_CFG_ERR_MSK)
|
|
panic("%s: Fatal DQ_CFG_ERR interrupt (0x%x)\n",
|
|
dev_name(dev), axi_info);
|
|
|
|
if (axi_int & ENT_INT_SRC2_CQ_CFG_ERR_MSK)
|
|
panic("%s: Fatal CQ_CFG_ERR interrupt (0x%x)\n",
|
|
dev_name(dev), axi_info);
|
|
|
|
if (axi_int & ENT_INT_SRC2_AXI_WRONG_INT_MSK)
|
|
panic("%s: Fatal AXI_WRONG_INT interrupt (0x%x)\n",
|
|
dev_name(dev), axi_info);
|
|
|
|
if (axi_int & ENT_INT_SRC2_AXI_OVERLF_INT_MSK)
|
|
panic("%s: Fatal AXI_OVERLF_INT incorrect interrupt (0x%x)\n",
|
|
dev_name(dev), axi_info);
|
|
|
|
hisi_sas_write32(hisi_hba, ENT_INT_SRC2, axi_int | 0x30000000);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
|
|
int_bcast_v1_hw,
|
|
int_phyup_v1_hw,
|
|
int_abnormal_v1_hw
|
|
};
|
|
|
|
static irq_handler_t fatal_interrupts[HISI_SAS_MAX_QUEUES] = {
|
|
fatal_ecc_int_v1_hw,
|
|
fatal_axi_int_v1_hw
|
|
};
|
|
|
|
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
struct platform_device *pdev = hisi_hba->platform_dev;
|
|
struct device *dev = &pdev->dev;
|
|
int i, j, irq, rc, idx;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
|
|
|
|
idx = i * HISI_SAS_PHY_INT_NR;
|
|
for (j = 0; j < HISI_SAS_PHY_INT_NR; j++, idx++) {
|
|
irq = platform_get_irq(pdev, idx);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
rc = devm_request_irq(dev, irq, phy_interrupts[j], 0,
|
|
DRV_NAME " phy", phy);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request phy interrupt %d, rc=%d\n",
|
|
irq, rc);
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
|
|
idx = hisi_hba->n_phy * HISI_SAS_PHY_INT_NR;
|
|
for (i = 0; i < hisi_hba->queue_count; i++, idx++) {
|
|
irq = platform_get_irq(pdev, idx);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
rc = devm_request_irq(dev, irq, cq_interrupt_v1_hw, 0,
|
|
DRV_NAME " cq", &hisi_hba->cq[i]);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request cq interrupt %d, rc=%d\n",
|
|
irq, rc);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
idx = (hisi_hba->n_phy * HISI_SAS_PHY_INT_NR) + hisi_hba->queue_count;
|
|
for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++, idx++) {
|
|
irq = platform_get_irq(pdev, idx);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
rc = devm_request_irq(dev, irq, fatal_interrupts[i], 0,
|
|
DRV_NAME " fatal", hisi_hba);
|
|
if (rc) {
|
|
dev_err(dev, "irq init: could not request fatal interrupt %d, rc=%d\n",
|
|
irq, rc);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
hisi_hba->cq_nvecs = hisi_hba->queue_count;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
for (i = 0; i < hisi_hba->n_phy; i++) {
|
|
/* Clear interrupt status */
|
|
val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT0);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, val);
|
|
val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT1);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, val);
|
|
val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT2);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, val);
|
|
|
|
/* Unmask interrupt */
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK, 0x3ce3ee);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0x17fff);
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8000012a);
|
|
|
|
/* bypass chip bug mask abnormal intr */
|
|
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK,
|
|
0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
|
|
{
|
|
int rc;
|
|
|
|
rc = hw_init_v1_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = interrupt_init_v1_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = interrupt_openall_v1_hw(hisi_hba);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct attribute *host_v1_hw_attrs[] = {
|
|
&dev_attr_phy_event_threshold.attr,
|
|
NULL
|
|
};
|
|
|
|
ATTRIBUTE_GROUPS(host_v1_hw);
|
|
|
|
static struct scsi_host_template sht_v1_hw = {
|
|
.name = DRV_NAME,
|
|
.proc_name = DRV_NAME,
|
|
.module = THIS_MODULE,
|
|
.queuecommand = sas_queuecommand,
|
|
.dma_need_drain = ata_scsi_dma_need_drain,
|
|
.target_alloc = sas_target_alloc,
|
|
.slave_configure = hisi_sas_slave_configure,
|
|
.scan_finished = hisi_sas_scan_finished,
|
|
.scan_start = hisi_sas_scan_start,
|
|
.change_queue_depth = sas_change_queue_depth,
|
|
.bios_param = sas_bios_param,
|
|
.this_id = -1,
|
|
.sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
|
|
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
|
|
.eh_device_reset_handler = sas_eh_device_reset_handler,
|
|
.eh_target_reset_handler = sas_eh_target_reset_handler,
|
|
.slave_alloc = hisi_sas_slave_alloc,
|
|
.target_destroy = sas_target_destroy,
|
|
.ioctl = sas_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = sas_ioctl,
|
|
#endif
|
|
.shost_groups = host_v1_hw_groups,
|
|
.host_reset = hisi_sas_host_reset,
|
|
};
|
|
|
|
static const struct hisi_sas_hw hisi_sas_v1_hw = {
|
|
.hw_init = hisi_sas_v1_init,
|
|
.setup_itct = setup_itct_v1_hw,
|
|
.sl_notify_ssp = sl_notify_ssp_v1_hw,
|
|
.clear_itct = clear_itct_v1_hw,
|
|
.prep_smp = prep_smp_v1_hw,
|
|
.prep_ssp = prep_ssp_v1_hw,
|
|
.start_delivery = start_delivery_v1_hw,
|
|
.phys_init = phys_init_v1_hw,
|
|
.phy_start = start_phy_v1_hw,
|
|
.phy_disable = disable_phy_v1_hw,
|
|
.phy_hard_reset = phy_hard_reset_v1_hw,
|
|
.phy_set_linkrate = phy_set_linkrate_v1_hw,
|
|
.phy_get_max_linkrate = phy_get_max_linkrate_v1_hw,
|
|
.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
|
|
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
|
|
.sht = &sht_v1_hw,
|
|
};
|
|
|
|
static int hisi_sas_v1_probe(struct platform_device *pdev)
|
|
{
|
|
return hisi_sas_probe(pdev, &hisi_sas_v1_hw);
|
|
}
|
|
|
|
static int hisi_sas_v1_remove(struct platform_device *pdev)
|
|
{
|
|
return hisi_sas_remove(pdev);
|
|
}
|
|
|
|
static const struct of_device_id sas_v1_of_match[] = {
|
|
{ .compatible = "hisilicon,hip05-sas-v1",},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sas_v1_of_match);
|
|
|
|
static const struct acpi_device_id sas_v1_acpi_match[] = {
|
|
{ "HISI0161", 0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, sas_v1_acpi_match);
|
|
|
|
static struct platform_driver hisi_sas_v1_driver = {
|
|
.probe = hisi_sas_v1_probe,
|
|
.remove = hisi_sas_v1_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = sas_v1_of_match,
|
|
.acpi_match_table = ACPI_PTR(sas_v1_acpi_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(hisi_sas_v1_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
|
|
MODULE_DESCRIPTION("HISILICON SAS controller v1 hw driver");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|