forked from Minki/linux
d1d8180252
In order to describe a single slave device that has no chip select line the 'num-chipselects' property has to be <0> and the 'cs-gpios' property doesn't need to be set. Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
32 lines
765 B
Plaintext
32 lines
765 B
Plaintext
SPI-GPIO devicetree bindings
|
|
|
|
Required properties:
|
|
|
|
- compatible: should be set to "spi-gpio"
|
|
- #address-cells: should be set to <0x1>
|
|
- ranges
|
|
- gpio-sck: GPIO spec for the SCK line to use
|
|
- gpio-miso: GPIO spec for the MISO line to use
|
|
- gpio-mosi: GPIO spec for the MOSI line to use
|
|
- cs-gpios: GPIOs to use for chipselect lines.
|
|
Not needed if num-chipselects = <0>.
|
|
- num-chipselects: Number of chipselect lines. Should be <0> if a single device
|
|
with no chip select is connected.
|
|
|
|
Example:
|
|
|
|
spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <0x1>;
|
|
ranges;
|
|
|
|
gpio-sck = <&gpio 95 0>;
|
|
gpio-miso = <&gpio 98 0>;
|
|
gpio-mosi = <&gpio 97 0>;
|
|
cs-gpios = <&gpio 125 0>;
|
|
num-chipselects = <1>;
|
|
|
|
/* clients */
|
|
};
|
|
|