Pekon Gupta 99ffa6425f ARM: dts: am437x-gp-evm: add support for parallel NAND flash ... Adds pinmux and DT node for Micron (MT29F4G08AB) x8 NAND device present on am437x-gp-evm board. (1) As NAND Flash data lines are muxed with eMMC, Thus at a given time either eMMC or NAND can be enabled. Selection between eMMC and NAND is controlled: (a) By dynamically driving following GPIO pin from software SPI2_CS0(GPIO) == 0 NAND is selected (default) SPI2_CS0(GPIO) == 1 eMMC is selected (b) By statically using Jumper (J89) on the board (2) As NAND device connnected to this board has page-size=4K and oob-size=224, So ROM code expects boot-loaders to be flashed in BCH16 ECC scheme for NAND boot. Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>		2014-05-27 14:22:31 -07:00
..
bootp
compressed	ARM: 7992/1: boot: compressed: ignore bswapsdi2.S	2014-03-07 22:04:10 +00:00
dts	ARM: dts: am437x-gp-evm: add support for parallel NAND flash	2014-05-27 14:22:31 -07:00
.gitignore
install.sh	arm, kbuild: make "make install" not depend on vmlinux	2013-10-02 22:30:35 +02:00
Makefile	arm, kbuild: make "make install" not depend on vmlinux	2013-10-02 22:30:35 +02:00