linux/drivers/net/wireless/wl12xx
Grazvydas Ignotas 8c00b39f33 wl1251: register platform_device to pass board data
wl1251 is embedded chip that can be connected using SDIO bus, and is not
an actual SDIO card. For this reason there is a need to pass some board
specific data, like 'EEPROM is attached' flag or power control callback.

However currently there is no way to pass this data through SDIO subsystem,
so this patch registers dummy platform_device to allow that, until we
have a better solution to this.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-16 15:32:01 -04:00
..
Kconfig wl1271: Changed wl1271_sdio to be selectable only on ARM 2010-03-10 17:44:43 -05:00
Makefile wl1271: Initial SDIO implementation 2010-03-09 15:02:59 -05:00
wl12xx_80211.h wl1271: fix endianess issues 2009-10-27 16:48:19 -04:00
wl1251_acx.c wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_acx.h wl1251: implement wl1251_acx_tid_cfg() 2009-12-21 18:55:57 -05:00
wl1251_boot.c wl1251: reduce eeprom read wait time 2010-03-15 15:32:04 -04:00
wl1251_boot.h
wl1251_cmd.c wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_cmd.h wl1251: use mac80211 provided channel parameters in scanning 2010-01-12 13:51:26 -05:00
wl1251_debugfs.c wl1251: fix potential crash 2010-03-16 15:20:25 -04:00
wl1251_debugfs.h
wl1251_event.c wl1251: Increase the beacon loss timeout value and handle regain event 2009-11-18 17:09:22 -05:00
wl1251_event.h
wl1251_init.c wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_init.h wl1251: implement acx_ac_cfg to configure hardware queues 2009-12-21 18:55:55 -05:00
wl1251_io.c
wl1251_io.h wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_main.c wl1251: read default MAC address from EEPROM when available 2010-04-16 15:32:00 -04:00
wl1251_ps.c wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1251_ps.h wl1251: Implement delayed entry into ELP mode 2009-11-18 17:09:20 -05:00
wl1251_reg.h wl1251: read default MAC address from EEPROM when available 2010-04-16 15:32:00 -04:00
wl1251_rx.c wl1251: use __dev_alloc_skb() on RX 2009-12-21 18:55:54 -05:00
wl1251_rx.h
wl1251_sdio.c wl1251: register platform_device to pass board data 2010-04-16 15:32:01 -04:00
wl1251_spi.c wl1251: use DRIVER_NAME macro in wl1251_spi_driver 2010-04-07 14:37:54 -04:00
wl1251_spi.h
wl1251_tx.c wl1251: update tx_hdr when aliging skb in tx 2009-12-21 18:56:00 -05:00
wl1251_tx.h wl1251: enable WMM 2009-12-21 18:56:02 -05:00
wl1251.h wl1251: fix ELP_CTRL register accesses when using SDIO 2010-03-15 15:32:03 -04:00
wl1271_acx.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_acx.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_boot.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_boot.h wl1271: Configure clock-request drive mode to open-drain 2010-03-31 14:39:12 -04:00
wl1271_cmd.c wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_cmd.h wl1271: Configure rates for templates 2010-04-06 16:55:13 -04:00
wl1271_conf.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_debugfs.c wl1271: Cleaned up wlan power on/off functions 2010-03-23 16:50:18 -04:00
wl1271_debugfs.h
wl1271_event.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_event.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_init.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_init.h wl1271: add most of the normal initialization commands to PLT mode 2010-02-19 15:52:44 -05:00
wl1271_io.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_io.h wl1271: Changed platform_device to be dynamically allocated 2010-03-23 16:50:25 -04:00
wl1271_main.c wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00
wl1271_ps.c wl1271: Go to ELP in idle 2010-04-09 13:43:10 -04:00
wl1271_ps.h wl1271: Fix PSM entry 2010-02-19 15:52:42 -05:00
wl1271_reg.h wl1271: remove unused flags 2010-01-14 18:16:54 -05:00
wl1271_rx.c wl1271: remove deprecated usage of RX status noise 2010-03-31 14:39:14 -04:00
wl1271_rx.h wl1271: Clean up RX rate reporting 2010-03-31 14:39:11 -04:00
wl1271_sdio.c wl1271: fix sdio driver name in wl1271_sdio_driver 2010-04-06 16:55:11 -04:00
wl1271_spi.c wl1271: Update busyword checking mechanism 2010-03-31 14:39:13 -04:00
wl1271_testmode.c wl1271: Removed wl1271_spi.h and made some functions static 2010-03-09 15:02:58 -05:00
wl1271_testmode.h wl1271: add testmode support 2010-02-19 15:52:47 -05:00
wl1271_tx.c wl1271: Fix tx queue flushing 2010-04-06 16:55:14 -04:00
wl1271_tx.h wl1271: Use minimum rate for each band for control messages 2010-04-06 16:55:12 -04:00
wl1271.h wl1271: Add support for connection quality monitoring 2010-04-09 13:43:11 -04:00