forked from Minki/linux
6e6f66226f
The immap_86xx.h header file only defines one data structure: the "global utilities" register set found on Freescale PowerPC SOCs. Rename this file to fsl_guts.h to reflect its true purpose, and extend it to cover the "GUTS" register set on 85xx chips. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
198 lines
7.9 KiB
C
198 lines
7.9 KiB
C
/**
|
|
* Freecale 85xx and 86xx Global Utilties register set
|
|
*
|
|
* Authors: Jeff Brown
|
|
* Timur Tabi <timur@freescale.com>
|
|
*
|
|
* Copyright 2004,2007 Freescale Semiconductor, Inc
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#ifndef __ASM_POWERPC_FSL_GUTS_H__
|
|
#define __ASM_POWERPC_FSL_GUTS_H__
|
|
#ifdef __KERNEL__
|
|
|
|
/*
|
|
* These #ifdefs are safe because it's not possible to build a kernel that
|
|
* runs on e500 and e600 cores.
|
|
*/
|
|
|
|
#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx)
|
|
#error Only 85xx and 86xx SOCs are supported
|
|
#endif
|
|
|
|
/**
|
|
* Global Utility Registers.
|
|
*
|
|
* Not all registers defined in this structure are available on all chips, so
|
|
* you are expected to know whether a given register actually exists on your
|
|
* chip before you access it.
|
|
*
|
|
* Also, some registers are similar on different chips but have slightly
|
|
* different names. In these cases, one name is chosen to avoid extraneous
|
|
* #ifdefs.
|
|
*/
|
|
#ifdef CONFIG_PPC_85xx
|
|
struct ccsr_guts_85xx {
|
|
#else
|
|
struct ccsr_guts_86xx {
|
|
#endif
|
|
__be32 porpllsr; /* 0x.0000 - POR PLL Ratio Status Register */
|
|
__be32 porbmsr; /* 0x.0004 - POR Boot Mode Status Register */
|
|
__be32 porimpscr; /* 0x.0008 - POR I/O Impedance Status and Control Register */
|
|
__be32 pordevsr; /* 0x.000c - POR I/O Device Status Register */
|
|
__be32 pordbgmsr; /* 0x.0010 - POR Debug Mode Status Register */
|
|
__be32 pordevsr2; /* 0x.0014 - POR device status register 2 */
|
|
u8 res018[0x20 - 0x18];
|
|
__be32 porcir; /* 0x.0020 - POR Configuration Information Register */
|
|
u8 res024[0x30 - 0x24];
|
|
__be32 gpiocr; /* 0x.0030 - GPIO Control Register */
|
|
u8 res034[0x40 - 0x34];
|
|
__be32 gpoutdr; /* 0x.0040 - General-Purpose Output Data Register */
|
|
u8 res044[0x50 - 0x44];
|
|
__be32 gpindr; /* 0x.0050 - General-Purpose Input Data Register */
|
|
u8 res054[0x60 - 0x54];
|
|
__be32 pmuxcr; /* 0x.0060 - Alternate Function Signal Multiplex Control */
|
|
__be32 pmuxcr2; /* 0x.0064 - Alternate function signal multiplex control 2 */
|
|
__be32 dmuxcr; /* 0x.0068 - DMA Mux Control Register */
|
|
u8 res06c[0x70 - 0x6c];
|
|
__be32 devdisr; /* 0x.0070 - Device Disable Control */
|
|
__be32 devdisr2; /* 0x.0074 - Device Disable Control 2 */
|
|
u8 res078[0x7c - 0x78];
|
|
__be32 pmjcr; /* 0x.007c - 4 Power Management Jog Control Register */
|
|
__be32 powmgtcsr; /* 0x.0080 - Power Management Status and Control Register */
|
|
__be32 pmrccr; /* 0x.0084 - Power Management Reset Counter Configuration Register */
|
|
__be32 pmpdccr; /* 0x.0088 - Power Management Power Down Counter Configuration Register */
|
|
__be32 pmcdr; /* 0x.008c - 4Power management clock disable register */
|
|
__be32 mcpsumr; /* 0x.0090 - Machine Check Summary Register */
|
|
__be32 rstrscr; /* 0x.0094 - Reset Request Status and Control Register */
|
|
__be32 ectrstcr; /* 0x.0098 - Exception reset control register */
|
|
__be32 autorstsr; /* 0x.009c - Automatic reset status register */
|
|
__be32 pvr; /* 0x.00a0 - Processor Version Register */
|
|
__be32 svr; /* 0x.00a4 - System Version Register */
|
|
u8 res0a8[0xb0 - 0xa8];
|
|
__be32 rstcr; /* 0x.00b0 - Reset Control Register */
|
|
u8 res0b4[0xc0 - 0xb4];
|
|
#ifdef CONFIG_PPC_85xx
|
|
__be32 iovselsr; /* 0x.00c0 - I/O voltage select status register */
|
|
#else
|
|
__be32 elbcvselcr; /* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
|
|
#endif
|
|
u8 res0c4[0x224 - 0xc4];
|
|
__be32 iodelay1; /* 0x.0224 - IO delay control register 1 */
|
|
__be32 iodelay2; /* 0x.0228 - IO delay control register 2 */
|
|
u8 res22c[0x800 - 0x22c];
|
|
__be32 clkdvdr; /* 0x.0800 - Clock Divide Register */
|
|
u8 res804[0x900 - 0x804];
|
|
__be32 ircr; /* 0x.0900 - Infrared Control Register */
|
|
u8 res904[0x908 - 0x904];
|
|
__be32 dmacr; /* 0x.0908 - DMA Control Register */
|
|
u8 res90c[0x914 - 0x90c];
|
|
__be32 elbccr; /* 0x.0914 - eLBC Control Register */
|
|
u8 res918[0xb20 - 0x918];
|
|
__be32 ddr1clkdr; /* 0x.0b20 - DDR1 Clock Disable Register */
|
|
__be32 ddr2clkdr; /* 0x.0b24 - DDR2 Clock Disable Register */
|
|
__be32 ddrclkdr; /* 0x.0b28 - DDR Clock Disable Register */
|
|
u8 resb2c[0xe00 - 0xb2c];
|
|
__be32 clkocr; /* 0x.0e00 - Clock Out Select Register */
|
|
u8 rese04[0xe10 - 0xe04];
|
|
__be32 ddrdllcr; /* 0x.0e10 - DDR DLL Control Register */
|
|
u8 rese14[0xe20 - 0xe14];
|
|
__be32 lbcdllcr; /* 0x.0e20 - LBC DLL Control Register */
|
|
__be32 cpfor; /* 0x.0e24 - L2 charge pump fuse override register */
|
|
u8 rese28[0xf04 - 0xe28];
|
|
__be32 srds1cr0; /* 0x.0f04 - SerDes1 Control Register 0 */
|
|
__be32 srds1cr1; /* 0x.0f08 - SerDes1 Control Register 0 */
|
|
u8 resf0c[0xf2c - 0xf0c];
|
|
__be32 itcr; /* 0x.0f2c - Internal transaction control register */
|
|
u8 resf30[0xf40 - 0xf30];
|
|
__be32 srds2cr0; /* 0x.0f40 - SerDes2 Control Register 0 */
|
|
__be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */
|
|
} __attribute__ ((packed));
|
|
|
|
#ifdef CONFIG_PPC_86xx
|
|
|
|
#define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */
|
|
#define CCSR_GUTS_DMACR_DEV_IR 1 /* DMA controller/channel set to IR */
|
|
|
|
/*
|
|
* Set the DMACR register in the GUTS
|
|
*
|
|
* The DMACR register determines the source of initiated transfers for each
|
|
* channel on each DMA controller. Rather than have a bunch of repetitive
|
|
* macros for the bit patterns, we just have a function that calculates
|
|
* them.
|
|
*
|
|
* guts: Pointer to GUTS structure
|
|
* co: The DMA controller (0 or 1)
|
|
* ch: The channel on the DMA controller (0, 1, 2, or 3)
|
|
* device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
|
|
*/
|
|
static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts,
|
|
unsigned int co, unsigned int ch, unsigned int device)
|
|
{
|
|
unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
|
|
|
|
clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
|
|
}
|
|
|
|
#define CCSR_GUTS_PMUXCR_LDPSEL 0x00010000
|
|
#define CCSR_GUTS_PMUXCR_SSI1_MASK 0x0000C000 /* Bitmask for SSI1 */
|
|
#define CCSR_GUTS_PMUXCR_SSI1_LA 0x00000000 /* Latched address */
|
|
#define CCSR_GUTS_PMUXCR_SSI1_HI 0x00004000 /* High impedance */
|
|
#define CCSR_GUTS_PMUXCR_SSI1_SSI 0x00008000 /* Used for SSI1 */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_MASK 0x00003000 /* Bitmask for SSI2 */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_LA 0x00000000 /* Latched address */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_HI 0x00001000 /* High impedance */
|
|
#define CCSR_GUTS_PMUXCR_SSI2_SSI 0x00002000 /* Used for SSI2 */
|
|
#define CCSR_GUTS_PMUXCR_LA_22_25_LA 0x00000000 /* Latched Address */
|
|
#define CCSR_GUTS_PMUXCR_LA_22_25_HI 0x00000400 /* High impedance */
|
|
#define CCSR_GUTS_PMUXCR_DBGDRV 0x00000200 /* Signals not driven */
|
|
#define CCSR_GUTS_PMUXCR_DMA2_0 0x00000008
|
|
#define CCSR_GUTS_PMUXCR_DMA2_3 0x00000004
|
|
#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002
|
|
#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001
|
|
|
|
/*
|
|
* Set the DMA external control bits in the GUTS
|
|
*
|
|
* The DMA external control bits in the PMUXCR are only meaningful for
|
|
* channels 0 and 3. Any other channels are ignored.
|
|
*
|
|
* guts: Pointer to GUTS structure
|
|
* co: The DMA controller (0 or 1)
|
|
* ch: The channel on the DMA controller (0, 1, 2, or 3)
|
|
* value: the new value for the bit (0 or 1)
|
|
*/
|
|
static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts,
|
|
unsigned int co, unsigned int ch, unsigned int value)
|
|
{
|
|
if ((ch == 0) || (ch == 3)) {
|
|
unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
|
|
|
|
clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
|
|
}
|
|
}
|
|
|
|
#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000
|
|
#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000
|
|
#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000
|
|
#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
|
|
#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK 0x06000000
|
|
#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
|
|
(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
|
|
#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT 16
|
|
#define CCSR_GUTS_CLKDVDR_PXCLK_MASK 0x001F0000
|
|
#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
|
|
#define CCSR_GUTS_CLKDVDR_SSICLK_MASK 0x000000FF
|
|
#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
|
|
|
|
#endif
|
|
|
|
#endif
|
|
#endif
|