forked from Minki/linux
7f4b04614a
Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
553 lines
13 KiB
C
553 lines
13 KiB
C
/*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* CPU frequency scaling for S5PC110/S5PV210
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <mach/map.h>
|
|
#include <mach/regs-clock.h>
|
|
|
|
static struct clk *dmc0_clk;
|
|
static struct clk *dmc1_clk;
|
|
static DEFINE_MUTEX(set_freq_lock);
|
|
|
|
/* APLL M,P,S values for 1G/800Mhz */
|
|
#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1)
|
|
#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1)
|
|
|
|
/* Use 800MHz when entering sleep mode */
|
|
#define SLEEP_FREQ (800 * 1000)
|
|
|
|
/* Tracks if cpu freqency can be updated anymore */
|
|
static bool no_cpufreq_access;
|
|
|
|
/*
|
|
* DRAM configurations to calculate refresh counter for changing
|
|
* frequency of memory.
|
|
*/
|
|
struct dram_conf {
|
|
unsigned long freq; /* HZ */
|
|
unsigned long refresh; /* DRAM refresh counter * 1000 */
|
|
};
|
|
|
|
/* DRAM configuration (DMC0 and DMC1) */
|
|
static struct dram_conf s5pv210_dram_conf[2];
|
|
|
|
enum perf_level {
|
|
L0, L1, L2, L3, L4,
|
|
};
|
|
|
|
enum s5pv210_mem_type {
|
|
LPDDR = 0x1,
|
|
LPDDR2 = 0x2,
|
|
DDR2 = 0x4,
|
|
};
|
|
|
|
enum s5pv210_dmc_port {
|
|
DMC0 = 0,
|
|
DMC1,
|
|
};
|
|
|
|
static struct cpufreq_frequency_table s5pv210_freq_table[] = {
|
|
{0, L0, 1000*1000},
|
|
{0, L1, 800*1000},
|
|
{0, L2, 400*1000},
|
|
{0, L3, 200*1000},
|
|
{0, L4, 100*1000},
|
|
{0, 0, CPUFREQ_TABLE_END},
|
|
};
|
|
|
|
static struct regulator *arm_regulator;
|
|
static struct regulator *int_regulator;
|
|
|
|
struct s5pv210_dvs_conf {
|
|
int arm_volt; /* uV */
|
|
int int_volt; /* uV */
|
|
};
|
|
|
|
static const int arm_volt_max = 1350000;
|
|
static const int int_volt_max = 1250000;
|
|
|
|
static struct s5pv210_dvs_conf dvs_conf[] = {
|
|
[L0] = {
|
|
.arm_volt = 1250000,
|
|
.int_volt = 1100000,
|
|
},
|
|
[L1] = {
|
|
.arm_volt = 1200000,
|
|
.int_volt = 1100000,
|
|
},
|
|
[L2] = {
|
|
.arm_volt = 1050000,
|
|
.int_volt = 1100000,
|
|
},
|
|
[L3] = {
|
|
.arm_volt = 950000,
|
|
.int_volt = 1100000,
|
|
},
|
|
[L4] = {
|
|
.arm_volt = 950000,
|
|
.int_volt = 1000000,
|
|
},
|
|
};
|
|
|
|
static u32 clkdiv_val[5][11] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
|
|
* HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
|
|
* ONEDRAM, MFC, G3D }
|
|
*/
|
|
|
|
/* L0 : [1000/200/100][166/83][133/66][200/200] */
|
|
{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
|
|
|
|
/* L1 : [800/200/100][166/83][133/66][200/200] */
|
|
{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
|
|
|
|
/* L2 : [400/200/100][166/83][133/66][200/200] */
|
|
{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
|
|
|
|
/* L3 : [200/200/100][166/83][133/66][200/200] */
|
|
{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
|
|
|
|
/* L4 : [100/100/100][83/83][66/66][100/100] */
|
|
{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
|
|
};
|
|
|
|
/*
|
|
* This function set DRAM refresh counter
|
|
* accoriding to operating frequency of DRAM
|
|
* ch: DMC port number 0 or 1
|
|
* freq: Operating frequency of DRAM(KHz)
|
|
*/
|
|
static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
|
|
{
|
|
unsigned long tmp, tmp1;
|
|
void __iomem *reg = NULL;
|
|
|
|
if (ch == DMC0) {
|
|
reg = (S5P_VA_DMC0 + 0x30);
|
|
} else if (ch == DMC1) {
|
|
reg = (S5P_VA_DMC1 + 0x30);
|
|
} else {
|
|
printk(KERN_ERR "Cannot find DMC port\n");
|
|
return;
|
|
}
|
|
|
|
/* Find current DRAM frequency */
|
|
tmp = s5pv210_dram_conf[ch].freq;
|
|
|
|
do_div(tmp, freq);
|
|
|
|
tmp1 = s5pv210_dram_conf[ch].refresh;
|
|
|
|
do_div(tmp1, tmp);
|
|
|
|
__raw_writel(tmp1, reg);
|
|
}
|
|
|
|
static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
|
|
{
|
|
unsigned long reg;
|
|
unsigned int priv_index;
|
|
unsigned int pll_changing = 0;
|
|
unsigned int bus_speed_changing = 0;
|
|
unsigned int old_freq, new_freq;
|
|
int arm_volt, int_volt;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&set_freq_lock);
|
|
|
|
if (no_cpufreq_access) {
|
|
#ifdef CONFIG_PM_VERBOSE
|
|
pr_err("%s:%d denied access to %s as it is disabled"
|
|
"temporarily\n", __FILE__, __LINE__, __func__);
|
|
#endif
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
old_freq = policy->cur;
|
|
new_freq = s5pv210_freq_table[index].frequency;
|
|
|
|
/* Finding current running level index */
|
|
if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
|
|
old_freq, CPUFREQ_RELATION_H,
|
|
&priv_index)) {
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
arm_volt = dvs_conf[index].arm_volt;
|
|
int_volt = dvs_conf[index].int_volt;
|
|
|
|
if (new_freq > old_freq) {
|
|
ret = regulator_set_voltage(arm_regulator,
|
|
arm_volt, arm_volt_max);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = regulator_set_voltage(int_regulator,
|
|
int_volt, int_volt_max);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
/* Check if there need to change PLL */
|
|
if ((index == L0) || (priv_index == L0))
|
|
pll_changing = 1;
|
|
|
|
/* Check if there need to change System bus clock */
|
|
if ((index == L4) || (priv_index == L4))
|
|
bus_speed_changing = 1;
|
|
|
|
if (bus_speed_changing) {
|
|
/*
|
|
* Reconfigure DRAM refresh counter value for minimum
|
|
* temporary clock while changing divider.
|
|
* expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
|
|
*/
|
|
if (pll_changing)
|
|
s5pv210_set_refresh(DMC1, 83000);
|
|
else
|
|
s5pv210_set_refresh(DMC1, 100000);
|
|
|
|
s5pv210_set_refresh(DMC0, 83000);
|
|
}
|
|
|
|
/*
|
|
* APLL should be changed in this level
|
|
* APLL -> MPLL(for stable transition) -> APLL
|
|
* Some clock source's clock API are not prepared.
|
|
* Do not use clock API in below code.
|
|
*/
|
|
if (pll_changing) {
|
|
/*
|
|
* 1. Temporary Change divider for MFC and G3D
|
|
* SCLKA2M(200/1=200)->(200/4=50)Mhz
|
|
*/
|
|
reg = __raw_readl(S5P_CLK_DIV2);
|
|
reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
|
|
reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
|
|
(3 << S5P_CLKDIV2_MFC_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_DIV2);
|
|
|
|
/* For MFC, G3D dividing */
|
|
do {
|
|
reg = __raw_readl(S5P_CLKDIV_STAT0);
|
|
} while (reg & ((1 << 16) | (1 << 17)));
|
|
|
|
/*
|
|
* 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
|
|
* (200/4=50)->(667/4=166)Mhz
|
|
*/
|
|
reg = __raw_readl(S5P_CLK_SRC2);
|
|
reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
|
|
reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
|
|
(1 << S5P_CLKSRC2_MFC_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_SRC2);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_CLKMUX_STAT1);
|
|
} while (reg & ((1 << 7) | (1 << 3)));
|
|
|
|
/*
|
|
* 3. DMC1 refresh count for 133Mhz if (index == L4) is
|
|
* true refresh counter is already programed in upper
|
|
* code. 0x287@83Mhz
|
|
*/
|
|
if (!bus_speed_changing)
|
|
s5pv210_set_refresh(DMC1, 133000);
|
|
|
|
/* 4. SCLKAPLL -> SCLKMPLL */
|
|
reg = __raw_readl(S5P_CLK_SRC0);
|
|
reg &= ~(S5P_CLKSRC0_MUX200_MASK);
|
|
reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_SRC0);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_CLKMUX_STAT0);
|
|
} while (reg & (0x1 << 18));
|
|
|
|
}
|
|
|
|
/* Change divider */
|
|
reg = __raw_readl(S5P_CLK_DIV0);
|
|
|
|
reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
|
|
S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
|
|
S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
|
|
S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
|
|
|
|
reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
|
|
(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
|
|
(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
|
|
(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
|
|
(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
|
|
(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
|
|
(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
|
|
(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
|
|
|
|
__raw_writel(reg, S5P_CLK_DIV0);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_CLKDIV_STAT0);
|
|
} while (reg & 0xff);
|
|
|
|
/* ARM MCS value changed */
|
|
reg = __raw_readl(S5P_ARM_MCS_CON);
|
|
reg &= ~0x3;
|
|
if (index >= L3)
|
|
reg |= 0x3;
|
|
else
|
|
reg |= 0x1;
|
|
|
|
__raw_writel(reg, S5P_ARM_MCS_CON);
|
|
|
|
if (pll_changing) {
|
|
/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
|
|
__raw_writel(0x2cf, S5P_APLL_LOCK);
|
|
|
|
/*
|
|
* 6. Turn on APLL
|
|
* 6-1. Set PMS values
|
|
* 6-2. Wait untile the PLL is locked
|
|
*/
|
|
if (index == L0)
|
|
__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
|
|
else
|
|
__raw_writel(APLL_VAL_800, S5P_APLL_CON);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_APLL_CON);
|
|
} while (!(reg & (0x1 << 29)));
|
|
|
|
/*
|
|
* 7. Change souce clock from SCLKMPLL(667Mhz)
|
|
* to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
|
|
* (667/4=166)->(200/4=50)Mhz
|
|
*/
|
|
reg = __raw_readl(S5P_CLK_SRC2);
|
|
reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
|
|
reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
|
|
(0 << S5P_CLKSRC2_MFC_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_SRC2);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_CLKMUX_STAT1);
|
|
} while (reg & ((1 << 7) | (1 << 3)));
|
|
|
|
/*
|
|
* 8. Change divider for MFC and G3D
|
|
* (200/4=50)->(200/1=200)Mhz
|
|
*/
|
|
reg = __raw_readl(S5P_CLK_DIV2);
|
|
reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
|
|
reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
|
|
(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_DIV2);
|
|
|
|
/* For MFC, G3D dividing */
|
|
do {
|
|
reg = __raw_readl(S5P_CLKDIV_STAT0);
|
|
} while (reg & ((1 << 16) | (1 << 17)));
|
|
|
|
/* 9. Change MPLL to APLL in MSYS_MUX */
|
|
reg = __raw_readl(S5P_CLK_SRC0);
|
|
reg &= ~(S5P_CLKSRC0_MUX200_MASK);
|
|
reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_SRC0);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_CLKMUX_STAT0);
|
|
} while (reg & (0x1 << 18));
|
|
|
|
/*
|
|
* 10. DMC1 refresh counter
|
|
* L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
|
|
* Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
|
|
*/
|
|
if (!bus_speed_changing)
|
|
s5pv210_set_refresh(DMC1, 200000);
|
|
}
|
|
|
|
/*
|
|
* L4 level need to change memory bus speed, hence onedram clock divier
|
|
* and memory refresh parameter should be changed
|
|
*/
|
|
if (bus_speed_changing) {
|
|
reg = __raw_readl(S5P_CLK_DIV6);
|
|
reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
|
|
reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
|
|
__raw_writel(reg, S5P_CLK_DIV6);
|
|
|
|
do {
|
|
reg = __raw_readl(S5P_CLKDIV_STAT1);
|
|
} while (reg & (1 << 15));
|
|
|
|
/* Reconfigure DRAM refresh counter value */
|
|
if (index != L4) {
|
|
/*
|
|
* DMC0 : 166Mhz
|
|
* DMC1 : 200Mhz
|
|
*/
|
|
s5pv210_set_refresh(DMC0, 166000);
|
|
s5pv210_set_refresh(DMC1, 200000);
|
|
} else {
|
|
/*
|
|
* DMC0 : 83Mhz
|
|
* DMC1 : 100Mhz
|
|
*/
|
|
s5pv210_set_refresh(DMC0, 83000);
|
|
s5pv210_set_refresh(DMC1, 100000);
|
|
}
|
|
}
|
|
|
|
if (new_freq < old_freq) {
|
|
regulator_set_voltage(int_regulator,
|
|
int_volt, int_volt_max);
|
|
|
|
regulator_set_voltage(arm_regulator,
|
|
arm_volt, arm_volt_max);
|
|
}
|
|
|
|
printk(KERN_DEBUG "Perf changed[L%d]\n", index);
|
|
|
|
exit:
|
|
mutex_unlock(&set_freq_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int check_mem_type(void __iomem *dmc_reg)
|
|
{
|
|
unsigned long val;
|
|
|
|
val = __raw_readl(dmc_reg + 0x4);
|
|
val = (val & (0xf << 8));
|
|
|
|
return val >> 8;
|
|
}
|
|
|
|
static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
unsigned long mem_type;
|
|
int ret;
|
|
|
|
policy->clk = clk_get(NULL, "armclk");
|
|
if (IS_ERR(policy->clk))
|
|
return PTR_ERR(policy->clk);
|
|
|
|
dmc0_clk = clk_get(NULL, "sclk_dmc0");
|
|
if (IS_ERR(dmc0_clk)) {
|
|
ret = PTR_ERR(dmc0_clk);
|
|
goto out_dmc0;
|
|
}
|
|
|
|
dmc1_clk = clk_get(NULL, "hclk_msys");
|
|
if (IS_ERR(dmc1_clk)) {
|
|
ret = PTR_ERR(dmc1_clk);
|
|
goto out_dmc1;
|
|
}
|
|
|
|
if (policy->cpu != 0) {
|
|
ret = -EINVAL;
|
|
goto out_dmc1;
|
|
}
|
|
|
|
/*
|
|
* check_mem_type : This driver only support LPDDR & LPDDR2.
|
|
* other memory type is not supported.
|
|
*/
|
|
mem_type = check_mem_type(S5P_VA_DMC0);
|
|
|
|
if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
|
|
printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
|
|
ret = -EINVAL;
|
|
goto out_dmc1;
|
|
}
|
|
|
|
/* Find current refresh counter and frequency each DMC */
|
|
s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
|
|
s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
|
|
|
|
s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
|
|
s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
|
|
|
|
policy->suspend_freq = SLEEP_FREQ;
|
|
return cpufreq_generic_init(policy, s5pv210_freq_table, 40000);
|
|
|
|
out_dmc1:
|
|
clk_put(dmc0_clk);
|
|
out_dmc0:
|
|
clk_put(policy->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
int ret;
|
|
|
|
ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ, 0);
|
|
if (ret < 0)
|
|
return NOTIFY_BAD;
|
|
|
|
no_cpufreq_access = true;
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct cpufreq_driver s5pv210_driver = {
|
|
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = s5pv210_target,
|
|
.get = cpufreq_generic_get,
|
|
.init = s5pv210_cpu_init,
|
|
.name = "s5pv210",
|
|
#ifdef CONFIG_PM
|
|
.suspend = cpufreq_generic_suspend,
|
|
.resume = cpufreq_generic_suspend, /* We need to set SLEEP FREQ again */
|
|
#endif
|
|
};
|
|
|
|
static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
|
|
.notifier_call = s5pv210_cpufreq_reboot_notifier_event,
|
|
};
|
|
|
|
static int __init s5pv210_cpufreq_init(void)
|
|
{
|
|
arm_regulator = regulator_get(NULL, "vddarm");
|
|
if (IS_ERR(arm_regulator)) {
|
|
pr_err("failed to get regulator vddarm");
|
|
return PTR_ERR(arm_regulator);
|
|
}
|
|
|
|
int_regulator = regulator_get(NULL, "vddint");
|
|
if (IS_ERR(int_regulator)) {
|
|
pr_err("failed to get regulator vddint");
|
|
regulator_put(arm_regulator);
|
|
return PTR_ERR(int_regulator);
|
|
}
|
|
|
|
register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier);
|
|
|
|
return cpufreq_register_driver(&s5pv210_driver);
|
|
}
|
|
|
|
late_initcall(s5pv210_cpufreq_init);
|