linux/arch
André Draszik 9846a4524a ARM: dts: imx7d: cl-som-imx7: make ethernet work again
Recent changes to the atheros at803x driver caused
ethernet to stop working on this board.
In particular commit 6d4cd041f0
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e5
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.

This now prevents ethernet from working on this board.

It used to work before those commits, because the
AR8031 comes out of reset with RX delay enabled, and
the at803x driver didn't touch the delay configuration
at all when "rgmii" mode was selected, and because
arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup()
unconditionally enables TX delay.

Since above commits ar8031_phy_fixup() also has no
effect anymore, and the end-result is that all delays
are disabled in the phy, no ethernet.

Update the device tree to restore functionality.

Signed-off-by: André Draszik <git@andred.net>
CC: Ilya Ledvich <ilya@compulab.co.il>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-19 09:50:38 +02:00
..
alpha Merge branch 'akpm' (patches from Andrew) 2019-07-17 08:58:04 -07:00
arc Merge branch 'akpm' (patches from Andrew) 2019-07-17 08:58:04 -07:00
arm ARM: dts: imx7d: cl-som-imx7: make ethernet work again 2019-08-19 09:50:38 +02:00
arm64 Kbuild updates for v5.3 (2nd) 2019-07-20 09:34:55 -07:00
c6x Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 2019-07-10 21:42:03 -07:00
csky arch/csky patches for 5.3-rc1 2019-07-19 12:15:33 -07:00
h8300 h8300 update for 5.3 2019-07-17 09:36:38 -07:00
hexagon hexagon: switch to generic version of pte allocation 2019-07-21 09:53:00 -07:00
ia64 Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2019-07-19 10:42:02 -07:00
m68k arch: mark syscall number 435 reserved for clone3 2019-07-15 00:39:33 +02:00
microblaze clone3-v5.3 2019-07-11 10:09:44 -07:00
mips This round of clk driver and framework updates is heavy on the driver update 2019-07-17 10:07:48 -07:00
nds32 nds32: fix asm/syscall.h 2019-07-16 19:23:24 -07:00
nios2 nios2 update for v5.3-rc1 2019-07-12 15:38:05 -07:00
openrisc dma-mapping updates for Linux 5.3 2019-07-12 15:13:55 -07:00
parisc Merge branch 'parisc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux 2019-07-18 12:23:45 -07:00
powerpc mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns 2019-07-18 17:08:06 -07:00
riscv Kbuild updates for v5.3 (2nd) 2019-07-20 09:34:55 -07:00
s390 dma-mapping fixes for 5.3-rc1 2019-07-20 12:09:52 -07:00
sh mm/memory_hotplug: allow arch_remove_memory() without CONFIG_MEMORY_HOTREMOVE 2019-07-18 17:08:06 -07:00
sparc Kbuild updates for v5.3 (2nd) 2019-07-20 09:34:55 -07:00
um This pull request contains the following changes for UML: 2019-07-14 17:17:34 -07:00
unicore32 Kconfig updates for v5.3 2019-07-12 16:06:27 -07:00
x86 dma-mapping fixes for 5.3-rc1 2019-07-20 12:09:52 -07:00
xtensa Merge branch 'akpm' (patches from Andrew) 2019-07-17 08:58:04 -07:00
.gitignore
Kconfig Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-07-20 10:33:44 -07:00