linux/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
Daniel Drake e85d0918b5 [PATCH] ZyDAS ZD1211 USB-WLAN driver
There are 60+ USB wifi adapters available on the market based on the ZyDAS
ZD1211 chip.

Unlike the predecessor (ZD1201), ZD1211 does not have a hardware MAC, so most
data operations are coordinated by the device driver. The ZD1211 chip sits
alongside an RF transceiver which is also controlled by the driver. Our driver
currently supports 2 RF types, we know of one other available in a few marketed
products which we will be supporting soon.

Our driver also supports the newer revision of ZD1211, called ZD1211B. The
initialization and RF operations are slightly different for the new revision,
but the main difference is 802.11e support. Our driver does not support the
QoS features yet, but we think we know how to use them.

This driver is based on ZyDAS's own GPL driver available from www.zydas.com.tw.
ZyDAS engineers have been responsive and supportive of our efforts, so thumbs
up to them. Additionally, the firmware is redistributable and they have
provided device specs.

This driver has been written primarily by Ulrich Kunitz and myself. Graham
Gower, Greg KH, Remco and Bryan Rittmeyer have also contributed. The
developers of ieee80211 and softmac have made our lives so much easier- thanks!

We maintain a small info-page: http://zd1211.ath.cx/wiki/DriverRewrite

If there is enough time for review, we would like to aim for inclusion in
2.6.18. The driver works nicely as a STA, and can connect to both open and
encrypted networks (we are using software-based encryption for now). We will
work towards supporting more advanced features in the future (ad-hoc, master
mode, 802.11a, ...).

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-05 13:42:58 -04:00

280 lines
8.3 KiB
C

/* zd_rf_rfmd.c: Functions for the RFMD RF controller
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include "zd_rf.h"
#include "zd_usb.h"
#include "zd_chip.h"
static u32 rf2959_table[][2] = {
RF_CHANNEL( 1) = { 0x181979, 0x1e6666 },
RF_CHANNEL( 2) = { 0x181989, 0x1e6666 },
RF_CHANNEL( 3) = { 0x181999, 0x1e6666 },
RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 },
RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 },
RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 },
RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 },
RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 },
RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 },
RF_CHANNEL(10) = { 0x181a09, 0x1e6666 },
RF_CHANNEL(11) = { 0x181a19, 0x1e6666 },
RF_CHANNEL(12) = { 0x181a29, 0x1e6666 },
RF_CHANNEL(13) = { 0x181a39, 0x1e6666 },
RF_CHANNEL(14) = { 0x181a60, 0x1c0000 },
};
#if 0
static int bits(u32 rw, int from, int to)
{
rw &= ~(0xffffffffU << (to+1));
rw >>= from;
return rw;
}
static int bit(u32 rw, int bit)
{
return bits(rw, bit, bit);
}
static void dump_regwrite(u32 rw)
{
int reg = bits(rw, 18, 22);
int rw_flag = bits(rw, 23, 23);
PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag);
switch (reg) {
case 0:
PDEBUG("reg0 CFG1 ref_sel %d hybernate %d rf_vco_reg_en %d"
" if_vco_reg_en %d if_vga_en %d",
bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1),
bit(rw, 0));
break;
case 1:
PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d"
" cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d"
" ifloopc %d dac1 %d",
bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3));
break;
case 2:
PDEBUG("reg2 IFPLL2 n1 %d num1 %d",
bits(rw, 6, 17), bits(rw, 0, 5));
break;
case 3:
PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17));
break;
case 4:
PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d",
bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
break;
case 5:
PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d"
" pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d"
" dac %d",
bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14),
bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10),
bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3));
break;
case 6:
PDEBUG("reg6 RFPLL2 n %d num %d",
bits(rw, 6, 17), bits(rw, 0, 5));
break;
case 7:
PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17));
break;
case 8:
PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d",
bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3));
break;
case 9:
PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d",
bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7),
bits(rw, 0, 2));
break;
case 10:
PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d"
" rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d"
" intbiasen %d tybypass %d",
bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14),
bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2),
bit(rw, 1), bit(rw, 0));
break;
case 11:
PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d"
" tx_delay %d",
bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8),
bits(rw, 0, 2));
break;
case 12:
PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d",
bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5));
break;
case 13:
PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d"
" lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d"
" rf_biasvco %d",
bit(rw, 17), bit(rw, 16), bit(rw, 15),
bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4),
bits(rw, 0, 2));
break;
case 14:
PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d"
" tx_acal %d tx_pcal %d",
bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8),
bits(rw, 0, 3));
break;
}
}
#endif /* 0 */
static int rf2959_init_hw(struct zd_rf *rf)
{
int r;
struct zd_chip *chip = zd_rf_to_chip(rf);
static const struct zd_ioreq16 ioreqs[] = {
{ CR2, 0x1E }, { CR9, 0x20 }, { CR10, 0x89 },
{ CR11, 0x00 }, { CR15, 0xD0 }, { CR17, 0x68 },
{ CR19, 0x4a }, { CR20, 0x0c }, { CR21, 0x0E },
{ CR23, 0x48 },
/* normal size for cca threshold */
{ CR24, 0x14 },
/* { CR24, 0x20 }, */
{ CR26, 0x90 }, { CR27, 0x30 }, { CR29, 0x20 },
{ CR31, 0xb2 }, { CR32, 0x43 }, { CR33, 0x28 },
{ CR38, 0x30 }, { CR34, 0x0f }, { CR35, 0xF0 },
{ CR41, 0x2a }, { CR46, 0x7F }, { CR47, 0x1E },
{ CR51, 0xc5 }, { CR52, 0xc5 }, { CR53, 0xc5 },
{ CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 },
{ CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 },
{ CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A },
{ CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 },
/* { CR91, 0x18 }, */
/* should solve continous CTS frame problems */
{ CR91, 0x00 },
{ CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 },
{ CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 },
{ CR98, 0x05 }, { CR99, 0x28 }, { CR100, 0x00 },
{ CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 },
{ CR104, 0x18 }, { CR105, 0x12 },
/* normal size */
{ CR106, 0x1a },
/* { CR106, 0x22 }, */
{ CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 },
{ CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 },
{ CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 },
{ CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 },
{ CR119, 0x16 },
/* no TX continuation */
{ CR122, 0x00 },
/* { CR122, 0xff }, */
{ CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 },
{ CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB },
{ CR170, 0xBB },
};
static const u32 rv[] = {
0x000007, /* REG0(CFG1) */
0x07dd43, /* REG1(IFPLL1) */
0x080959, /* REG2(IFPLL2) */
0x0e6666,
0x116a57, /* REG4 */
0x17dd43, /* REG5 */
0x1819f9, /* REG6 */
0x1e6666,
0x214554,
0x25e7fa,
0x27fffa,
/* The Zydas driver somehow forgets to set this value. It's
* only set for Japan. We are using internal power control
* for now.
*/
0x294128, /* internal power */
/* 0x28252c, */ /* External control TX power */
/* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */
0x2c0000,
0x300000,
0x340000, /* REG13(0xD) */
0x381e0f, /* REG14(0xE) */
/* Bogus, RF2959's data sheet doesn't know register 27, which is
* actually referenced here. The commented 0x11 is 17.
*/
0x6c180f, /* REG27(0x11) */
};
r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
if (r)
return r;
return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
}
static int rf2959_set_channel(struct zd_rf *rf, u8 channel)
{
int i, r;
u32 *rv = rf2959_table[channel-1];
struct zd_chip *chip = zd_rf_to_chip(rf);
for (i = 0; i < 2; i++) {
r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS);
if (r)
return r;
}
return 0;
}
static int rf2959_switch_radio_on(struct zd_rf *rf)
{
static const struct zd_ioreq16 ioreqs[] = {
{ CR10, 0x89 },
{ CR11, 0x00 },
};
struct zd_chip *chip = zd_rf_to_chip(rf);
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
static int rf2959_switch_radio_off(struct zd_rf *rf)
{
static const struct zd_ioreq16 ioreqs[] = {
{ CR10, 0x15 },
{ CR11, 0x81 },
};
struct zd_chip *chip = zd_rf_to_chip(rf);
return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
int zd_rf_init_rf2959(struct zd_rf *rf)
{
struct zd_chip *chip = zd_rf_to_chip(rf);
if (chip->is_zd1211b) {
dev_err(zd_chip_dev(chip),
"RF2959 is currently not supported for ZD1211B"
" devices\n");
return -ENODEV;
}
rf->init_hw = rf2959_init_hw;
rf->set_channel = rf2959_set_channel;
rf->switch_radio_on = rf2959_switch_radio_on;
rf->switch_radio_off = rf2959_switch_radio_off;
return 0;
}