forked from Minki/linux
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
372 lines
8.6 KiB
C
372 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Driver for Panasonic AN30259A 3-channel LED driver
|
|
//
|
|
// Copyright (c) 2018 Simon Shields <simon@lineageos.org>
|
|
//
|
|
// Datasheet:
|
|
// https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define AN30259A_MAX_LEDS 3
|
|
|
|
#define AN30259A_REG_SRESET 0x00
|
|
#define AN30259A_LED_SRESET BIT(0)
|
|
|
|
/* LED power registers */
|
|
#define AN30259A_REG_LED_ON 0x01
|
|
#define AN30259A_LED_EN(x) BIT((x) - 1)
|
|
#define AN30259A_LED_SLOPE(x) BIT(((x) - 1) + 4)
|
|
|
|
#define AN30259A_REG_LEDCC(x) (0x03 + ((x) - 1))
|
|
|
|
/* slope control registers */
|
|
#define AN30259A_REG_SLOPE(x) (0x06 + ((x) - 1))
|
|
#define AN30259A_LED_SLOPETIME1(x) (x)
|
|
#define AN30259A_LED_SLOPETIME2(x) ((x) << 4)
|
|
|
|
#define AN30259A_REG_LEDCNT1(x) (0x09 + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DUTYMAX(x) ((x) << 4)
|
|
#define AN30259A_LED_DUTYMID(x) (x)
|
|
|
|
#define AN30259A_REG_LEDCNT2(x) (0x0A + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DELAY(x) ((x) << 4)
|
|
#define AN30259A_LED_DUTYMIN(x) (x)
|
|
|
|
/* detention time control (length of each slope step) */
|
|
#define AN30259A_REG_LEDCNT3(x) (0x0B + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DT1(x) (x)
|
|
#define AN30259A_LED_DT2(x) ((x) << 4)
|
|
|
|
#define AN30259A_REG_LEDCNT4(x) (0x0C + (4 * ((x) - 1)))
|
|
#define AN30259A_LED_DT3(x) (x)
|
|
#define AN30259A_LED_DT4(x) ((x) << 4)
|
|
|
|
#define AN30259A_REG_MAX 0x14
|
|
|
|
#define AN30259A_BLINK_MAX_TIME 7500 /* ms */
|
|
#define AN30259A_SLOPE_RESOLUTION 500 /* ms */
|
|
|
|
#define AN30259A_NAME "an30259a"
|
|
|
|
#define STATE_OFF 0
|
|
#define STATE_KEEP 1
|
|
#define STATE_ON 2
|
|
|
|
struct an30259a;
|
|
|
|
struct an30259a_led {
|
|
struct an30259a *chip;
|
|
struct fwnode_handle *fwnode;
|
|
struct led_classdev cdev;
|
|
u32 num;
|
|
u32 default_state;
|
|
bool sloping;
|
|
};
|
|
|
|
struct an30259a {
|
|
struct mutex mutex; /* held when writing to registers */
|
|
struct i2c_client *client;
|
|
struct an30259a_led leds[AN30259A_MAX_LEDS];
|
|
struct regmap *regmap;
|
|
int num_leds;
|
|
};
|
|
|
|
static int an30259a_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct an30259a_led *led;
|
|
int ret;
|
|
unsigned int led_on;
|
|
|
|
led = container_of(cdev, struct an30259a_led, cdev);
|
|
mutex_lock(&led->chip->mutex);
|
|
|
|
ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
|
|
if (ret)
|
|
goto error;
|
|
|
|
switch (brightness) {
|
|
case LED_OFF:
|
|
led_on &= ~AN30259A_LED_EN(led->num);
|
|
led_on &= ~AN30259A_LED_SLOPE(led->num);
|
|
led->sloping = false;
|
|
break;
|
|
default:
|
|
led_on |= AN30259A_LED_EN(led->num);
|
|
if (led->sloping)
|
|
led_on |= AN30259A_LED_SLOPE(led->num);
|
|
ret = regmap_write(led->chip->regmap,
|
|
AN30259A_REG_LEDCNT1(led->num),
|
|
AN30259A_LED_DUTYMAX(0xf) |
|
|
AN30259A_LED_DUTYMID(0xf));
|
|
if (ret)
|
|
goto error;
|
|
break;
|
|
}
|
|
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCC(led->num),
|
|
brightness);
|
|
|
|
error:
|
|
mutex_unlock(&led->chip->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int an30259a_blink_set(struct led_classdev *cdev,
|
|
unsigned long *delay_off, unsigned long *delay_on)
|
|
{
|
|
struct an30259a_led *led;
|
|
int ret, num;
|
|
unsigned int led_on;
|
|
unsigned long off = *delay_off, on = *delay_on;
|
|
|
|
led = container_of(cdev, struct an30259a_led, cdev);
|
|
|
|
mutex_lock(&led->chip->mutex);
|
|
num = led->num;
|
|
|
|
/* slope time can only be a multiple of 500ms. */
|
|
if (off % AN30259A_SLOPE_RESOLUTION || on % AN30259A_SLOPE_RESOLUTION) {
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* up to a maximum of 7500ms. */
|
|
if (off > AN30259A_BLINK_MAX_TIME || on > AN30259A_BLINK_MAX_TIME) {
|
|
ret = -EINVAL;
|
|
goto error;
|
|
}
|
|
|
|
/* if no blink specified, default to 1 Hz. */
|
|
if (!off && !on) {
|
|
*delay_off = off = 500;
|
|
*delay_on = on = 500;
|
|
}
|
|
|
|
/* convert into values the HW will understand. */
|
|
off /= AN30259A_SLOPE_RESOLUTION;
|
|
on /= AN30259A_SLOPE_RESOLUTION;
|
|
|
|
/* duty min should be zero (=off), delay should be zero. */
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT2(num),
|
|
AN30259A_LED_DELAY(0) | AN30259A_LED_DUTYMIN(0));
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* reset detention time (no "breathing" effect). */
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT3(num),
|
|
AN30259A_LED_DT1(0) | AN30259A_LED_DT2(0));
|
|
if (ret)
|
|
goto error;
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT4(num),
|
|
AN30259A_LED_DT3(0) | AN30259A_LED_DT4(0));
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* slope time controls on/off cycle length. */
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_SLOPE(num),
|
|
AN30259A_LED_SLOPETIME1(off) |
|
|
AN30259A_LED_SLOPETIME2(on));
|
|
if (ret)
|
|
goto error;
|
|
|
|
/* Finally, enable slope mode. */
|
|
ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
|
|
if (ret)
|
|
goto error;
|
|
|
|
led_on |= AN30259A_LED_SLOPE(num) | AN30259A_LED_EN(led->num);
|
|
|
|
ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
|
|
|
|
if (!ret)
|
|
led->sloping = true;
|
|
error:
|
|
mutex_unlock(&led->chip->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int an30259a_dt_init(struct i2c_client *client,
|
|
struct an30259a *chip)
|
|
{
|
|
struct device_node *np = dev_of_node(&client->dev), *child;
|
|
int count, ret;
|
|
int i = 0;
|
|
const char *str;
|
|
struct an30259a_led *led;
|
|
|
|
count = of_get_available_child_count(np);
|
|
if (!count || count > AN30259A_MAX_LEDS)
|
|
return -EINVAL;
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
u32 source;
|
|
|
|
ret = of_property_read_u32(child, "reg", &source);
|
|
if (ret != 0 || !source || source > AN30259A_MAX_LEDS) {
|
|
dev_err(&client->dev, "Couldn't read LED address: %d\n",
|
|
ret);
|
|
count--;
|
|
continue;
|
|
}
|
|
|
|
led = &chip->leds[i];
|
|
|
|
led->num = source;
|
|
led->chip = chip;
|
|
led->fwnode = of_fwnode_handle(child);
|
|
|
|
if (!of_property_read_string(child, "default-state", &str)) {
|
|
if (!strcmp(str, "on"))
|
|
led->default_state = STATE_ON;
|
|
else if (!strcmp(str, "keep"))
|
|
led->default_state = STATE_KEEP;
|
|
else
|
|
led->default_state = STATE_OFF;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
|
|
chip->num_leds = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config an30259a_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = AN30259A_REG_MAX,
|
|
};
|
|
|
|
static void an30259a_init_default_state(struct an30259a_led *led)
|
|
{
|
|
struct an30259a *chip = led->chip;
|
|
int led_on, err;
|
|
|
|
switch (led->default_state) {
|
|
case STATE_ON:
|
|
led->cdev.brightness = LED_FULL;
|
|
break;
|
|
case STATE_KEEP:
|
|
err = regmap_read(chip->regmap, AN30259A_REG_LED_ON, &led_on);
|
|
if (err)
|
|
break;
|
|
|
|
if (!(led_on & AN30259A_LED_EN(led->num))) {
|
|
led->cdev.brightness = LED_OFF;
|
|
break;
|
|
}
|
|
regmap_read(chip->regmap, AN30259A_REG_LEDCC(led->num),
|
|
&led->cdev.brightness);
|
|
break;
|
|
default:
|
|
led->cdev.brightness = LED_OFF;
|
|
}
|
|
|
|
an30259a_brightness_set(&led->cdev, led->cdev.brightness);
|
|
}
|
|
|
|
static int an30259a_probe(struct i2c_client *client)
|
|
{
|
|
struct an30259a *chip;
|
|
int i, err;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
err = an30259a_dt_init(client, chip);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mutex_init(&chip->mutex);
|
|
chip->client = client;
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
chip->regmap = devm_regmap_init_i2c(client, &an30259a_regmap_config);
|
|
|
|
if (IS_ERR(chip->regmap)) {
|
|
err = PTR_ERR(chip->regmap);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
err);
|
|
goto exit;
|
|
}
|
|
|
|
for (i = 0; i < chip->num_leds; i++) {
|
|
struct led_init_data init_data = {};
|
|
|
|
an30259a_init_default_state(&chip->leds[i]);
|
|
chip->leds[i].cdev.brightness_set_blocking =
|
|
an30259a_brightness_set;
|
|
chip->leds[i].cdev.blink_set = an30259a_blink_set;
|
|
|
|
init_data.fwnode = chip->leds[i].fwnode;
|
|
init_data.devicename = AN30259A_NAME;
|
|
init_data.default_label = ":";
|
|
|
|
err = devm_led_classdev_register_ext(&client->dev,
|
|
&chip->leds[i].cdev,
|
|
&init_data);
|
|
if (err < 0)
|
|
goto exit;
|
|
}
|
|
return 0;
|
|
|
|
exit:
|
|
mutex_destroy(&chip->mutex);
|
|
return err;
|
|
}
|
|
|
|
static void an30259a_remove(struct i2c_client *client)
|
|
{
|
|
struct an30259a *chip = i2c_get_clientdata(client);
|
|
|
|
mutex_destroy(&chip->mutex);
|
|
}
|
|
|
|
static const struct of_device_id an30259a_match_table[] = {
|
|
{ .compatible = "panasonic,an30259a", },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, an30259a_match_table);
|
|
|
|
static const struct i2c_device_id an30259a_id[] = {
|
|
{ "an30259a", 0 },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, an30259a_id);
|
|
|
|
static struct i2c_driver an30259a_driver = {
|
|
.driver = {
|
|
.name = "leds-an30259a",
|
|
.of_match_table = of_match_ptr(an30259a_match_table),
|
|
},
|
|
.probe_new = an30259a_probe,
|
|
.remove = an30259a_remove,
|
|
.id_table = an30259a_id,
|
|
};
|
|
|
|
module_i2c_driver(an30259a_driver);
|
|
|
|
MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
|
|
MODULE_DESCRIPTION("AN30259A LED driver");
|
|
MODULE_LICENSE("GPL v2");
|