linux/arch/powerpc/sysdev
Kumar Gala 31207dab7d powerpc/mpic: Fix incorrect allocation of interrupt rev-map
Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map.  However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0).  This causes us to always call
irq_find_mapping() from mpic_get_irq().

By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
..
bestcomm trivial: fix typos/grammar errors in Kconfig texts 2009-03-30 15:22:01 +02:00
qe_lib powerpc/qe: Select QE_USB with USB_GADGET_FSL_QE 2008-12-30 12:12:12 -06:00
6xx-suspend.S [POWERPC] Add 6xx-style HID0_SLEEP support. 2008-05-16 23:22:28 +10:00
axonram.c powerpc/axonram: Enable partitioning of the Axons DDR2 DIMMs 2008-07-22 10:39:31 +10:00
cpm1.c cpumask: remove references to struct irqaction's mask field. 2009-03-30 22:05:14 +10:30
cpm2_pic.c powerpc/cpm2: Fix set interrupt type 2009-02-06 10:44:02 -06:00
cpm2_pic.h [POWERPC] cpm2: CPM2 interrupt controller fix 2007-02-07 14:03:20 +11:00
cpm2.c powerpc/cpm2: fix building fs_enet driver as a module. 2009-03-19 04:00:01 -05:00
cpm_common.c powerpc/mm: Tweak PTE bit combination definitions 2009-03-24 13:47:33 +11:00
dart_iommu.c powerpc/pseries: iommu enablement for CMO 2008-07-25 15:44:43 +10:00
dart.h [POWERPC] Use 4kB iommu pages even on 64kB-page systems 2006-11-01 14:52:48 +11:00
dcr-low.S powerpc/4xx: Extended DCR support v2 2008-12-21 14:21:15 +11:00
dcr.c powerpc: Const-qualify Device Node Argument to DCR Resource Extent API 2008-12-21 14:21:16 +11:00
fsl_gtm.c powerpc/sysdev: implement FSL GTM support 2008-06-10 10:38:50 -05:00
fsl_lbc.c [MTD] [NAND] FSL-UPM: add multi chip support 2009-04-06 07:17:09 -07:00
fsl_msi.c powerpc: Convert the FSL MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
fsl_msi.h powerpc: Convert the FSL MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
fsl_pci.c powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support 2009-01-28 18:16:45 -06:00
fsl_pci.h powerpc: Move mpc83xx_add_bridge to fsl_pci.c 2008-07-16 17:57:35 -05:00
fsl_rio.c fsl_rio: Pass the proper device to dma mapping routines 2009-04-21 15:34:37 -05:00
fsl_soc.c powerpc/fsl_soc: Remove mpc83xx_wdt_init, again 2009-05-08 16:31:00 -05:00
fsl_soc.h powerpc/fsl_soc: isolate legacy fsl_spi support to mpc832x_rdb boards 2009-04-01 08:59:23 -07:00
grackle.c powerpc: Introduce ppc_pci_flags accessors 2008-12-16 15:53:16 +11:00
i8259.c powerpc: Fix irq_alloc_host() reference counting and callers 2008-06-09 13:51:16 +10:00
indirect_pci.c powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 Errata 2008-06-17 19:01:38 -04:00
ipic.c powerpc/83xx: Fix the interrupt loss problem on ipic 2009-03-09 09:25:35 -05:00
ipic.h [POWERPC] ipic: ack only for edge interrupts 2007-12-12 01:53:07 -06:00
Kconfig powerpc: Move 8xxx GPIO Kconfig under the platform menu 2008-09-23 23:36:32 -05:00
Makefile powerpc: Implement GPIO driver for simple memory-mapped banks 2008-12-30 11:13:45 -06:00
micropatch.c [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c 2008-01-28 08:31:05 -06:00
mmio_nvram.c [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
mpc8xx_pic.c [POWERPC] arch/powerpc/sysdev: Add missing of_node_put 2008-02-06 22:06:59 +11:00
mpc8xx_pic.h [POWERPC] 8xx: mpc885ads pcmcia support 2007-07-10 00:33:51 -05:00
mpc8xxx_gpio.c powerpc: gpio driver for mpc8349/8572/8610 and compatible 2008-09-23 10:41:16 -05:00
mpic_msi.c powerpc: Convert the MPIC MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
mpic_pasemi_msi.c powerpc: Convert the MPIC MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
mpic_u3msi.c powerpc: Convert the MPIC MSI code to use msi_bitmap 2008-08-20 16:34:58 +10:00
mpic.c powerpc/mpic: Fix incorrect allocation of interrupt rev-map 2009-05-15 16:43:41 +10:00
mpic.h cpumask: make irq_set_affinity() take a const struct cpumask 2008-12-13 21:20:26 +10:30
msi_bitmap.c powerpc/msi: Mark the MSI bitmap selftest code as __init 2009-03-24 13:47:28 +11:00
mv64x60_dev.c mv643xx_eth: remove force_phy_addr field 2008-09-05 06:33:59 +02:00
mv64x60_pci.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60_pic.c [POWERPC] mv64x60: Fix FDT compatible names: mv64x60 => mv64360 2008-04-15 21:21:24 +10:00
mv64x60_udbg.c [POWERPC] Fix mv64x60 early console code to use cell-index property 2008-04-24 20:57:34 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
of_rtc.c [POWERPC] Enable RTC for Ebony and Walnut (v2) 2008-01-25 07:07:26 -06:00
pmi.c powerpc/pmi: Irq handlers return irqreturn_t 2009-03-24 13:47:30 +11:00
ppc4xx_gpio.c powerpc/4xx: Add PowerPC 4xx GPIO driver 2008-10-17 13:33:44 -04:00
ppc4xx_pci.c Merge commit 'origin/master' into next 2009-03-11 17:10:07 +11:00
ppc4xx_pci.h [POWERPC] 4xx: Add 460EX PCIe support to 4xx pci driver 2008-03-26 07:19:16 -05:00
ppc4xx_soc.c [POWERPC] 4xx: Create common ppc4xx_reset_system() in ppc4xx_soc.c 2008-04-02 20:44:56 -05:00
rtc_cmos_setup.c powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC 2008-07-28 08:47:38 -05:00
simple_gpio.c powerpc: Implement GPIO driver for simple memory-mapped banks 2008-12-30 11:13:45 -06:00
simple_gpio.h powerpc: Implement GPIO driver for simple memory-mapped banks 2008-12-30 11:13:45 -06:00
tsi108_dev.c [POWERPC] Replace remaining __FUNCTION__ occurrences 2008-04-01 20:43:09 +11:00
tsi108_pci.c powerpc: Fix irq_alloc_host() reference counting and callers 2008-06-09 13:51:16 +10:00
uic.c powerpc: Fix irq_alloc_host() reference counting and callers 2008-06-09 13:51:16 +10:00
xilinx_intc.c powerpc/virtex: Fix duplicate level irq events. 2009-05-14 10:23:11 -06:00