forked from Minki/linux
332bea1a26
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
45 lines
1.5 KiB
Plaintext
45 lines
1.5 KiB
Plaintext
HiSilicon Hip05 and Hip06 PCIe host bridge DT description
|
|
|
|
HiSilicon PCIe host controller is based on Designware PCI core.
|
|
It shares common functions with PCIe Designware core driver and inherits
|
|
common properties defined in
|
|
Documentation/devicetree/bindings/pci/designware-pci.txt.
|
|
|
|
Additional properties are described here:
|
|
|
|
Required properties
|
|
- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
|
|
- reg: Should contain rc_dbi, config registers location and length.
|
|
- reg-names: Must include the following entries:
|
|
"rc_dbi": controller configuration registers;
|
|
"config": PCIe configuration space registers.
|
|
- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts.
|
|
- port-id: Should be 0, 1, 2 or 3.
|
|
|
|
Optional properties:
|
|
- status: Either "ok" or "disabled".
|
|
- dma-coherent: Present if DMA operations are coherent.
|
|
|
|
Hip05 Example (note that Hip06 is the same except compatible):
|
|
pcie@0xb0080000 {
|
|
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
|
|
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
|
|
reg-names = "rc_dbi", "config";
|
|
bus-range = <0 15>;
|
|
msi-parent = <&its_pcie>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>;
|
|
num-lanes = <8>;
|
|
port-id = <1>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0xf800 0 0 7>;
|
|
interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10
|
|
0x0 0 0 2 &mbigen_pcie 2 11
|
|
0x0 0 0 3 &mbigen_pcie 3 12
|
|
0x0 0 0 4 &mbigen_pcie 4 13>;
|
|
status = "ok";
|
|
};
|