forked from Minki/linux
a77720ad0a
This patch enables hotplugging of SATA devices in the sata_promise driver. It's been tested successfully on both first- and second-generation Promise SATA chips: SATA150 TX2plus, SATAII150 TX2plus, SATAII150 TX4, SATA300 TX2plus, and SATA300 TX4. The only quirk I've seen is that hotplugging (insertion) on the first-generation SATA150 TX2plus requires a lengthier EH sequence than on the second-generation chips. On the second-generation chips a simple soft reset seems to suffice, but on the first-generation chip there's a "port is slow to respond" after the initial soft reset, after which libata issues a hard reset, and then the device is recognised. The hotplug checks are high up in the interrupt handling path, not deep down in error_intr as in ahci/sata_sil24. That's because the chip doesn't signal hotplug status changes in the per-port status register: instead a global register contains hotplug control and status flags for all ports. I considered following the ahci/sata_sil24 structure, but that would have required non-trivial changes to the interrupt handling path, so I chose to keep the hotplug changes simple and unobtrusive. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> -- This patch depends on the "sata_promise: cleanups" patch. Changes since the previous version (posted June 19): - Correct pdc_interrupt() to increment 'handled' also in the hotplug case. This prevents IRQ_NONE from being returned when an interrupt only has hotplug events to handle, which could confuse the kernel's IRQ machinery. - Added testing on the SATAII150 TX4. drivers/ata/sata_promise.c | 41 ++++++++++++++++++++++++++++++++++++----- 1 files changed, 36 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
1047 lines
28 KiB
C
1047 lines
28 KiB
C
/*
|
|
* sata_promise.c - Promise SATA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware information only available under NDA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include "sata_promise.h"
|
|
|
|
#define DRV_NAME "sata_promise"
|
|
#define DRV_VERSION "2.09"
|
|
|
|
enum {
|
|
PDC_MAX_PORTS = 4,
|
|
PDC_MMIO_BAR = 3,
|
|
|
|
/* register offsets */
|
|
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
|
|
PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */
|
|
PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */
|
|
PDC_CYLINDER_LOW = 0x10, /* Cylinder low reg (per port) */
|
|
PDC_CYLINDER_HIGH = 0x14, /* Cylinder high reg (per port) */
|
|
PDC_DEVICE = 0x18, /* Device/Head reg (per port) */
|
|
PDC_COMMAND = 0x1C, /* Command/status reg (per port) */
|
|
PDC_ALTSTATUS = 0x38, /* Alternate-status/device-control reg (per port) */
|
|
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
|
|
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
|
|
PDC_FLASH_CTL = 0x44, /* Flash control register */
|
|
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
|
|
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
|
|
PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
|
|
PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
|
|
PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
|
|
PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
|
|
|
|
/* PDC_GLOBAL_CTL bit definitions */
|
|
PDC_PH_ERR = (1 << 8), /* PCI error while loading packet */
|
|
PDC_SH_ERR = (1 << 9), /* PCI error while loading S/G table */
|
|
PDC_DH_ERR = (1 << 10), /* PCI error while loading data */
|
|
PDC2_HTO_ERR = (1 << 12), /* host bus timeout */
|
|
PDC2_ATA_HBA_ERR = (1 << 13), /* error during SATA DATA FIS transmission */
|
|
PDC2_ATA_DMA_CNT_ERR = (1 << 14), /* DMA DATA FIS size differs from S/G count */
|
|
PDC_OVERRUN_ERR = (1 << 19), /* S/G byte count larger than HD requires */
|
|
PDC_UNDERRUN_ERR = (1 << 20), /* S/G byte count less than HD requires */
|
|
PDC_DRIVE_ERR = (1 << 21), /* drive error */
|
|
PDC_PCI_SYS_ERR = (1 << 22), /* PCI system error */
|
|
PDC1_PCI_PARITY_ERR = (1 << 23), /* PCI parity error (from SATA150 driver) */
|
|
PDC1_ERR_MASK = PDC1_PCI_PARITY_ERR,
|
|
PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR,
|
|
PDC_ERR_MASK = (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC_OVERRUN_ERR
|
|
| PDC_UNDERRUN_ERR | PDC_DRIVE_ERR | PDC_PCI_SYS_ERR
|
|
| PDC1_ERR_MASK | PDC2_ERR_MASK),
|
|
|
|
board_2037x = 0, /* FastTrak S150 TX2plus */
|
|
board_2037x_pata = 1, /* FastTrak S150 TX2plus PATA port */
|
|
board_20319 = 2, /* FastTrak S150 TX4 */
|
|
board_20619 = 3, /* FastTrak TX4000 */
|
|
board_2057x = 4, /* SATAII150 Tx2plus */
|
|
board_2057x_pata = 5, /* SATAII150 Tx2plus PATA port */
|
|
board_40518 = 6, /* SATAII150 Tx4 */
|
|
|
|
PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */
|
|
|
|
/* Sequence counter control registers bit definitions */
|
|
PDC_SEQCNTRL_INT_MASK = (1 << 5), /* Sequence Interrupt Mask */
|
|
|
|
/* Feature register values */
|
|
PDC_FEATURE_ATAPI_PIO = 0x00, /* ATAPI data xfer by PIO */
|
|
PDC_FEATURE_ATAPI_DMA = 0x01, /* ATAPI data xfer by DMA */
|
|
|
|
/* Device/Head register values */
|
|
PDC_DEVICE_SATA = 0xE0, /* Device/Head value for SATA devices */
|
|
|
|
/* PDC_CTLSTAT bit definitions */
|
|
PDC_DMA_ENABLE = (1 << 7),
|
|
PDC_IRQ_DISABLE = (1 << 10),
|
|
PDC_RESET = (1 << 11), /* HDMA reset */
|
|
|
|
PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO |
|
|
ATA_FLAG_PIO_POLLING,
|
|
|
|
/* ap->flags bits */
|
|
PDC_FLAG_GEN_II = (1 << 24),
|
|
PDC_FLAG_SATA_PATA = (1 << 25), /* supports SATA + PATA */
|
|
PDC_FLAG_4_PORTS = (1 << 26), /* 4 ports */
|
|
};
|
|
|
|
struct pdc_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
};
|
|
|
|
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static int pdc_common_port_start(struct ata_port *ap);
|
|
static int pdc_sata_port_start(struct ata_port *ap);
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc);
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void pdc_irq_clear(struct ata_port *ap);
|
|
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
|
|
static void pdc_freeze(struct ata_port *ap);
|
|
static void pdc_thaw(struct ata_port *ap);
|
|
static void pdc_pata_error_handler(struct ata_port *ap);
|
|
static void pdc_sata_error_handler(struct ata_port *ap);
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static int pdc_pata_cable_detect(struct ata_port *ap);
|
|
static int pdc_sata_cable_detect(struct ata_port *ap);
|
|
|
|
static struct scsi_host_template pdc_ata_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations pdc_sata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.check_atapi_dma = pdc_check_atapi_dma,
|
|
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.error_handler = pdc_sata_error_handler,
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
.cable_detect = pdc_sata_cable_detect,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_clear = pdc_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.scr_read = pdc_sata_scr_read,
|
|
.scr_write = pdc_sata_scr_write,
|
|
.port_start = pdc_sata_port_start,
|
|
};
|
|
|
|
/* First-generation chips need a more restrictive ->check_atapi_dma op */
|
|
static const struct ata_port_operations pdc_old_sata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.check_atapi_dma = pdc_old_sata_check_atapi_dma,
|
|
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.error_handler = pdc_sata_error_handler,
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
.cable_detect = pdc_sata_cable_detect,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_clear = pdc_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.scr_read = pdc_sata_scr_read,
|
|
.scr_write = pdc_sata_scr_write,
|
|
.port_start = pdc_sata_port_start,
|
|
};
|
|
|
|
static const struct ata_port_operations pdc_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = pdc_tf_load_mmio,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = pdc_exec_command_mmio,
|
|
.dev_select = ata_std_dev_select,
|
|
.check_atapi_dma = pdc_check_atapi_dma,
|
|
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue_prot,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.error_handler = pdc_pata_error_handler,
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
.cable_detect = pdc_pata_cable_detect,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_clear = pdc_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
|
|
.port_start = pdc_common_port_start,
|
|
};
|
|
|
|
static const struct ata_port_info pdc_port_info[] = {
|
|
/* board_2037x */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_SATA_PATA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_old_sata_ops,
|
|
},
|
|
|
|
/* board_2037x_pata */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
/* board_20319 */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_4_PORTS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_old_sata_ops,
|
|
},
|
|
|
|
/* board_20619 */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
|
|
PDC_FLAG_4_PORTS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
/* board_2057x */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_sata_ops,
|
|
},
|
|
|
|
/* board_2057x_pata */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
|
|
PDC_FLAG_GEN_II,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
/* board_40518 */
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_sata_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id pdc_ata_pci_tbl[] = {
|
|
{ PCI_VDEVICE(PROMISE, 0x3371), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3373), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3375), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3376), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3570), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3571), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3574), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3577), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d73), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d75), board_2057x },
|
|
|
|
{ PCI_VDEVICE(PROMISE, 0x3318), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3319), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3515), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3519), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d17), board_40518 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d18), board_40518 },
|
|
|
|
{ PCI_VDEVICE(PROMISE, 0x6629), board_20619 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver pdc_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pdc_ata_pci_tbl,
|
|
.probe = pdc_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static int pdc_common_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct pdc_port_priv *pp;
|
|
int rc;
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
pp->pkt = dmam_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
|
|
if (!pp->pkt)
|
|
return -ENOMEM;
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdc_sata_port_start(struct ata_port *ap)
|
|
{
|
|
int rc;
|
|
|
|
rc = pdc_common_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* fix up PHYMODE4 align timing */
|
|
if (ap->flags & PDC_FLAG_GEN_II) {
|
|
void __iomem *mmio = ap->ioaddr.scr_addr;
|
|
unsigned int tmp;
|
|
|
|
tmp = readl(mmio + 0x014);
|
|
tmp = (tmp & ~3) | 1; /* set bits 1:0 = 0:1 */
|
|
writel(tmp, mmio + 0x014);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pdc_reset_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
|
|
unsigned int i;
|
|
u32 tmp;
|
|
|
|
for (i = 11; i > 0; i--) {
|
|
tmp = readl(mmio);
|
|
if (tmp & PDC_RESET)
|
|
break;
|
|
|
|
udelay(100);
|
|
|
|
tmp |= PDC_RESET;
|
|
writel(tmp, mmio);
|
|
}
|
|
|
|
tmp &= ~PDC_RESET;
|
|
writel(tmp, mmio);
|
|
readl(mmio); /* flush */
|
|
}
|
|
|
|
static int pdc_pata_cable_detect(struct ata_port *ap)
|
|
{
|
|
u8 tmp;
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
|
|
|
|
tmp = readb(mmio);
|
|
if (tmp & 0x01)
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
static int pdc_sata_cable_detect(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_SATA;
|
|
}
|
|
|
|
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return 0xffffffffU;
|
|
return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
|
|
u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return;
|
|
writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
dma_addr_t sg_table = ap->prd_dma;
|
|
unsigned int cdb_len = qc->dev->cdb_len;
|
|
u8 *cdb = qc->cdb;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
u8 *buf = pp->pkt;
|
|
u32 *buf32 = (u32 *) buf;
|
|
unsigned int dev_sel, feature, nbytes;
|
|
|
|
/* set control bits (byte 0), zero delay seq id (byte 3),
|
|
* and seq id (byte 2)
|
|
*/
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_ATAPI_DMA:
|
|
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
|
|
buf32[0] = cpu_to_le32(PDC_PKT_READ);
|
|
else
|
|
buf32[0] = 0;
|
|
break;
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
buf32[0] = cpu_to_le32(PDC_PKT_NODATA);
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */
|
|
buf32[2] = 0; /* no next-packet */
|
|
|
|
/* select drive */
|
|
if (sata_scr_valid(ap)) {
|
|
dev_sel = PDC_DEVICE_SATA;
|
|
} else {
|
|
dev_sel = ATA_DEVICE_OBS;
|
|
if (qc->dev->devno != 0)
|
|
dev_sel |= ATA_DEV1;
|
|
}
|
|
buf[12] = (1 << 5) | ATA_REG_DEVICE;
|
|
buf[13] = dev_sel;
|
|
buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY;
|
|
buf[15] = dev_sel; /* once more, waiting for BSY to clear */
|
|
|
|
buf[16] = (1 << 5) | ATA_REG_NSECT;
|
|
buf[17] = 0x00;
|
|
buf[18] = (1 << 5) | ATA_REG_LBAL;
|
|
buf[19] = 0x00;
|
|
|
|
/* set feature and byte counter registers */
|
|
if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) {
|
|
feature = PDC_FEATURE_ATAPI_PIO;
|
|
/* set byte counter register to real transfer byte count */
|
|
nbytes = qc->nbytes;
|
|
if (nbytes > 0xffff)
|
|
nbytes = 0xffff;
|
|
} else {
|
|
feature = PDC_FEATURE_ATAPI_DMA;
|
|
/* set byte counter register to 0 */
|
|
nbytes = 0;
|
|
}
|
|
buf[20] = (1 << 5) | ATA_REG_FEATURE;
|
|
buf[21] = feature;
|
|
buf[22] = (1 << 5) | ATA_REG_BYTEL;
|
|
buf[23] = nbytes & 0xFF;
|
|
buf[24] = (1 << 5) | ATA_REG_BYTEH;
|
|
buf[25] = (nbytes >> 8) & 0xFF;
|
|
|
|
/* send ATAPI packet command 0xA0 */
|
|
buf[26] = (1 << 5) | ATA_REG_CMD;
|
|
buf[27] = ATA_CMD_PACKET;
|
|
|
|
/* select drive and check DRQ */
|
|
buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY;
|
|
buf[29] = dev_sel;
|
|
|
|
/* we can represent cdb lengths 2/4/6/8/10/12/14/16 */
|
|
BUG_ON(cdb_len & ~0x1E);
|
|
|
|
/* append the CDB as the final part */
|
|
buf[30] = (((cdb_len >> 1) & 7) << 5) | ATA_REG_DATA | PDC_LAST_REG;
|
|
memcpy(buf+31, cdb, cdb_len);
|
|
}
|
|
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct pdc_port_priv *pp = qc->ap->private_data;
|
|
unsigned int i;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
ata_qc_prep(qc);
|
|
/* fall through */
|
|
|
|
case ATA_PROT_NODATA:
|
|
i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
|
|
qc->dev->devno, pp->pkt);
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
|
|
else
|
|
i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
|
|
|
|
pdc_pkt_footer(&qc->tf, pp->pkt, i);
|
|
break;
|
|
|
|
case ATA_PROT_ATAPI:
|
|
ata_qc_prep(qc);
|
|
break;
|
|
|
|
case ATA_PROT_ATAPI_DMA:
|
|
ata_qc_prep(qc);
|
|
/*FALLTHROUGH*/
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
pdc_atapi_pkt(qc);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void pdc_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
tmp = readl(mmio + PDC_CTLSTAT);
|
|
tmp |= PDC_IRQ_DISABLE;
|
|
tmp &= ~PDC_DMA_ENABLE;
|
|
writel(tmp, mmio + PDC_CTLSTAT);
|
|
readl(mmio + PDC_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static void pdc_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
/* clear IRQ */
|
|
readl(mmio + PDC_INT_SEQMASK);
|
|
|
|
/* turn IRQ back on */
|
|
tmp = readl(mmio + PDC_CTLSTAT);
|
|
tmp &= ~PDC_IRQ_DISABLE;
|
|
writel(tmp, mmio + PDC_CTLSTAT);
|
|
readl(mmio + PDC_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN))
|
|
pdc_reset_port(ap);
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
static void pdc_pata_error_handler(struct ata_port *ap)
|
|
{
|
|
pdc_common_error_handler(ap, NULL);
|
|
}
|
|
|
|
static void pdc_sata_error_handler(struct ata_port *ap)
|
|
{
|
|
pdc_common_error_handler(ap, sata_std_hardreset);
|
|
}
|
|
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
pdc_reset_port(ap);
|
|
}
|
|
|
|
static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
|
|
u32 port_status, u32 err_mask)
|
|
{
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
unsigned int ac_err_mask = 0;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "port_status 0x%08x", port_status);
|
|
port_status &= err_mask;
|
|
|
|
if (port_status & PDC_DRIVE_ERR)
|
|
ac_err_mask |= AC_ERR_DEV;
|
|
if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
|
|
ac_err_mask |= AC_ERR_HSM;
|
|
if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
|
|
ac_err_mask |= AC_ERR_ATA_BUS;
|
|
if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR
|
|
| PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR))
|
|
ac_err_mask |= AC_ERR_HOST_BUS;
|
|
|
|
if (sata_scr_valid(ap))
|
|
ehi->serror |= pdc_sata_scr_read(ap, SCR_ERROR);
|
|
|
|
qc->err_mask |= ac_err_mask;
|
|
|
|
pdc_reset_port(ap);
|
|
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static inline unsigned int pdc_host_intr(struct ata_port *ap,
|
|
struct ata_queued_cmd *qc)
|
|
{
|
|
unsigned int handled = 0;
|
|
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
|
|
u32 port_status, err_mask;
|
|
|
|
err_mask = PDC_ERR_MASK;
|
|
if (ap->flags & PDC_FLAG_GEN_II)
|
|
err_mask &= ~PDC1_ERR_MASK;
|
|
else
|
|
err_mask &= ~PDC2_ERR_MASK;
|
|
port_status = readl(port_mmio + PDC_GLOBAL_CTL);
|
|
if (unlikely(port_status & err_mask)) {
|
|
pdc_error_intr(ap, qc, port_status, err_mask);
|
|
return 1;
|
|
}
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
case ATA_PROT_ATAPI_DMA:
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
|
|
ata_qc_complete(qc);
|
|
handled = 1;
|
|
break;
|
|
|
|
default:
|
|
ap->stats.idle_irq++;
|
|
break;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void pdc_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct ata_host *host = ap->host;
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
|
|
|
readl(mmio + PDC_INT_SEQMASK);
|
|
}
|
|
|
|
static inline int pdc_is_sataii_tx4(unsigned long flags)
|
|
{
|
|
const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
|
|
return (flags & mask) == mask;
|
|
}
|
|
|
|
static inline unsigned int pdc_port_no_to_ata_no(unsigned int port_no, int is_sataii_tx4)
|
|
{
|
|
static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
|
|
return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
|
|
}
|
|
|
|
static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct ata_port *ap;
|
|
u32 mask = 0;
|
|
unsigned int i, tmp;
|
|
unsigned int handled = 0;
|
|
void __iomem *mmio_base;
|
|
unsigned int hotplug_offset, ata_no;
|
|
u32 hotplug_status;
|
|
int is_sataii_tx4;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (!host || !host->iomap[PDC_MMIO_BAR]) {
|
|
VPRINTK("QUICK EXIT\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
mmio_base = host->iomap[PDC_MMIO_BAR];
|
|
|
|
/* read and clear hotplug flags for all ports */
|
|
if (host->ports[0]->flags & PDC_FLAG_GEN_II)
|
|
hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
else
|
|
hotplug_offset = PDC_SATA_PLUG_CSR;
|
|
hotplug_status = readl(mmio_base + hotplug_offset);
|
|
if (hotplug_status & 0xff)
|
|
writel(hotplug_status | 0xff, mmio_base + hotplug_offset);
|
|
hotplug_status &= 0xff; /* clear uninteresting bits */
|
|
|
|
/* reading should also clear interrupts */
|
|
mask = readl(mmio_base + PDC_INT_SEQMASK);
|
|
|
|
if (mask == 0xffffffff && hotplug_status == 0) {
|
|
VPRINTK("QUICK EXIT 2\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
mask &= 0xffff; /* only 16 tags possible */
|
|
if (mask == 0 && hotplug_status == 0) {
|
|
VPRINTK("QUICK EXIT 3\n");
|
|
goto done_irq;
|
|
}
|
|
|
|
writel(mask, mmio_base + PDC_INT_SEQMASK);
|
|
|
|
is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
VPRINTK("port %u\n", i);
|
|
ap = host->ports[i];
|
|
|
|
/* check for a plug or unplug event */
|
|
ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
|
|
tmp = hotplug_status & (0x11 << ata_no);
|
|
if (tmp && ap &&
|
|
!(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp);
|
|
ata_port_freeze(ap);
|
|
++handled;
|
|
continue;
|
|
}
|
|
|
|
/* check for a packet interrupt */
|
|
tmp = mask & (1 << (i + 1));
|
|
if (tmp && ap &&
|
|
!(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
|
|
handled += pdc_host_intr(ap, qc);
|
|
}
|
|
}
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
done_irq:
|
|
spin_unlock(&host->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static inline void pdc_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR];
|
|
unsigned int port_no = ap->port_no;
|
|
u8 seq = (u8) (port_no + 1);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
writel(0x00000001, mmio + (seq * 4));
|
|
readl(mmio + (seq * 4)); /* flush */
|
|
|
|
pp->pkt[2] = seq;
|
|
wmb(); /* flush PRD, pkt writes */
|
|
writel(pp->pkt_dma, ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
|
|
}
|
|
|
|
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
|
|
break;
|
|
/*FALLTHROUGH*/
|
|
case ATA_PROT_NODATA:
|
|
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
|
break;
|
|
/*FALLTHROUGH*/
|
|
case ATA_PROT_ATAPI_DMA:
|
|
case ATA_PROT_DMA:
|
|
pdc_packet_start(qc);
|
|
return 0;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_ATAPI_DMA);
|
|
ata_tf_load(ap, tf);
|
|
}
|
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON (tf->protocol == ATA_PROT_DMA ||
|
|
tf->protocol == ATA_PROT_ATAPI_DMA);
|
|
ata_exec_command(ap, tf);
|
|
}
|
|
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
u8 *scsicmd = qc->scsicmd->cmnd;
|
|
int pio = 1; /* atapi dma off by default */
|
|
|
|
/* Whitelist commands that may use DMA. */
|
|
switch (scsicmd[0]) {
|
|
case WRITE_12:
|
|
case WRITE_10:
|
|
case WRITE_6:
|
|
case READ_12:
|
|
case READ_10:
|
|
case READ_6:
|
|
case 0xad: /* READ_DVD_STRUCTURE */
|
|
case 0xbe: /* READ_CD */
|
|
pio = 0;
|
|
}
|
|
/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
|
|
if (scsicmd[0] == WRITE_10) {
|
|
unsigned int lba;
|
|
lba = (scsicmd[2] << 24) | (scsicmd[3] << 16) | (scsicmd[4] << 8) | scsicmd[5];
|
|
if (lba >= 0xFFFF4FA2)
|
|
pio = 1;
|
|
}
|
|
return pio;
|
|
}
|
|
|
|
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
/* First generation chips cannot use ATAPI DMA on SATA ports */
|
|
return 1;
|
|
}
|
|
|
|
static void pdc_ata_setup_port(struct ata_port *ap,
|
|
void __iomem *base, void __iomem *scr_addr)
|
|
{
|
|
ap->ioaddr.cmd_addr = base;
|
|
ap->ioaddr.data_addr = base;
|
|
ap->ioaddr.feature_addr =
|
|
ap->ioaddr.error_addr = base + 0x4;
|
|
ap->ioaddr.nsect_addr = base + 0x8;
|
|
ap->ioaddr.lbal_addr = base + 0xc;
|
|
ap->ioaddr.lbam_addr = base + 0x10;
|
|
ap->ioaddr.lbah_addr = base + 0x14;
|
|
ap->ioaddr.device_addr = base + 0x18;
|
|
ap->ioaddr.command_addr =
|
|
ap->ioaddr.status_addr = base + 0x1c;
|
|
ap->ioaddr.altstatus_addr =
|
|
ap->ioaddr.ctl_addr = base + 0x38;
|
|
ap->ioaddr.scr_addr = scr_addr;
|
|
}
|
|
|
|
static void pdc_host_init(struct ata_host *host)
|
|
{
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
|
int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II;
|
|
int hotplug_offset;
|
|
u32 tmp;
|
|
|
|
if (is_gen2)
|
|
hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
else
|
|
hotplug_offset = PDC_SATA_PLUG_CSR;
|
|
|
|
/*
|
|
* Except for the hotplug stuff, this is voodoo from the
|
|
* Promise driver. Label this entire section
|
|
* "TODO: figure out why we do this"
|
|
*/
|
|
|
|
/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
|
|
tmp = readl(mmio + PDC_FLASH_CTL);
|
|
tmp |= 0x02000; /* bit 13 (enable bmr burst) */
|
|
if (!is_gen2)
|
|
tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */
|
|
writel(tmp, mmio + PDC_FLASH_CTL);
|
|
|
|
/* clear plug/unplug flags for all ports */
|
|
tmp = readl(mmio + hotplug_offset);
|
|
writel(tmp | 0xff, mmio + hotplug_offset);
|
|
|
|
/* unmask plug/unplug ints */
|
|
tmp = readl(mmio + hotplug_offset);
|
|
writel(tmp & ~0xff0000, mmio + hotplug_offset);
|
|
|
|
/* don't initialise TBG or SLEW on 2nd generation chips */
|
|
if (is_gen2)
|
|
return;
|
|
|
|
/* reduce TBG clock to 133 Mhz. */
|
|
tmp = readl(mmio + PDC_TBG_MODE);
|
|
tmp &= ~0x30000; /* clear bit 17, 16*/
|
|
tmp |= 0x10000; /* set bit 17:16 = 0:1 */
|
|
writel(tmp, mmio + PDC_TBG_MODE);
|
|
|
|
readl(mmio + PDC_TBG_MODE); /* flush */
|
|
msleep(10);
|
|
|
|
/* adjust slew rate control register. */
|
|
tmp = readl(mmio + PDC_SLEW_CTL);
|
|
tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */
|
|
tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */
|
|
writel(tmp, mmio + PDC_SLEW_CTL);
|
|
}
|
|
|
|
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
|
|
const struct ata_port_info *ppi[PDC_MAX_PORTS];
|
|
struct ata_host *host;
|
|
void __iomem *base;
|
|
int n_ports, i, rc;
|
|
int is_sataii_tx4;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* enable and acquire resources */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
base = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
|
|
|
|
/* determine port configuration and setup host */
|
|
n_ports = 2;
|
|
if (pi->flags & PDC_FLAG_4_PORTS)
|
|
n_ports = 4;
|
|
for (i = 0; i < n_ports; i++)
|
|
ppi[i] = pi;
|
|
|
|
if (pi->flags & PDC_FLAG_SATA_PATA) {
|
|
u8 tmp = readb(base + PDC_FLASH_CTL+1);
|
|
if (!(tmp & 0x80))
|
|
ppi[n_ports++] = pi + 1;
|
|
}
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
|
|
if (!host) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
|
|
return -ENOMEM;
|
|
}
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
|
|
pdc_ata_setup_port(host->ports[i],
|
|
base + 0x200 + ata_no * 0x80,
|
|
base + 0x400 + ata_no * 0x100);
|
|
}
|
|
|
|
/* initialize adapter */
|
|
pdc_host_init(host);
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* start host, request IRQ and attach */
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, pdc_interrupt, IRQF_SHARED,
|
|
&pdc_ata_sht);
|
|
}
|
|
|
|
static int __init pdc_ata_init(void)
|
|
{
|
|
return pci_register_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
static void __exit pdc_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(pdc_ata_init);
|
|
module_exit(pdc_ata_exit);
|