This is a quite large renaming to consolidate display related bindings into a single "display" directory from various scattered locations of video, drm, gpu, fb, mipi, and panel. The prior location was somewhat based on the Linux driver location, but bindings should be independent of that. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org>
		
			
				
	
	
		
			56 lines
		
	
	
		
			1.5 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			56 lines
		
	
	
		
			1.5 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
 | |
| 
 | |
| Required properties:
 | |
|  - compatible: value should be one of the following:
 | |
|    "atmel,at91sam9n12-hlcdc"
 | |
|    "atmel,at91sam9x5-hlcdc"
 | |
|    "atmel,sama5d2-hlcdc"
 | |
|    "atmel,sama5d3-hlcdc"
 | |
|    "atmel,sama5d4-hlcdc"
 | |
|  - reg: base address and size of the HLCDC device registers.
 | |
|  - clock-names: the name of the 3 clocks requested by the HLCDC device.
 | |
|    Should contain "periph_clk", "sys_clk" and "slow_clk".
 | |
|  - clocks: should contain the 3 clocks requested by the HLCDC device.
 | |
|  - interrupts: should contain the description of the HLCDC interrupt line
 | |
| 
 | |
| The HLCDC IP exposes two subdevices:
 | |
|  - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
 | |
|  - a Display Controller: see ../display/atmel-hlcdc-dc.txt
 | |
| 
 | |
| Example:
 | |
| 
 | |
| 	hlcdc: hlcdc@f0030000 {
 | |
| 		compatible = "atmel,sama5d3-hlcdc";
 | |
| 		reg = <0xf0030000 0x2000>;
 | |
| 		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
 | |
| 		clock-names = "periph_clk","sys_clk", "slow_clk";
 | |
| 		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
 | |
| 		status = "disabled";
 | |
| 
 | |
| 		hlcdc-display-controller {
 | |
| 			compatible = "atmel,hlcdc-display-controller";
 | |
| 			pinctrl-names = "default";
 | |
| 			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
 | |
| 			#address-cells = <1>;
 | |
| 			#size-cells = <0>;
 | |
| 
 | |
| 			port@0 {
 | |
| 				#address-cells = <1>;
 | |
| 				#size-cells = <0>;
 | |
| 				reg = <0>;
 | |
| 
 | |
| 				hlcdc_panel_output: endpoint@0 {
 | |
| 					reg = <0>;
 | |
| 					remote-endpoint = <&panel_input>;
 | |
| 				};
 | |
| 			};
 | |
| 		};
 | |
| 
 | |
| 		hlcdc_pwm: hlcdc-pwm {
 | |
| 			compatible = "atmel,hlcdc-pwm";
 | |
| 			pinctrl-names = "default";
 | |
| 			pinctrl-0 = <&pinctrl_lcd_pwm>;
 | |
| 			#pwm-cells = <3>;
 | |
| 		};
 | |
| 	};
 |