linux/drivers/usb
Lu Baolu 9425183d17 usb: xhci: handle Config Error Change (CEC) in xhci driver
Linux xHCI driver doesn't report and handle port cofig error change.
If Port Configure Error for root hub port occurs, CEC bit in PORTSC
would be set by xHC and remains 1. This happends when the root port
fails to configure its link partner, e.g. the port fails to exchange
port capabilities information using Port Capability LMPs.

Then the Port Status Change Events will be blocked until all status
change bits(CEC is one of the change bits) are cleared('0') (refer to
xHCI spec 4.19.2). Otherwise, the port status change event for this
root port will not be generated anymore, then root port would look
like dead for user and can't be recovered until a Host Controller
Reset(HCRST).

This patch is to check CEC bit in PORTSC in xhci_get_port_status()
and set a Config Error in the return status if CEC is set. This will
cause a ClearPortFeature request, where CEC bit is cleared in
xhci_clear_port_change_bit().

[The commit log is based on initial Marvell patch posted at
http://marc.info/?l=linux-kernel&m=142323612321434&w=2]

Reported-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: stable <stable@vger.kernel.org> # v3.2+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-23 21:51:12 +01:00
..
atm
c67x00 usb: c67x00: drop owner assignment from platform_drivers 2014-10-20 16:21:46 +02:00
chipidea usb: chipidea: otg: add a_alt_hnp_support response for B device 2015-03-15 10:27:20 +01:00
class cdc-acm: Add support for Denso cradle CU-321 2015-02-24 08:38:47 -08:00
common usb: common: otg-fsm: only signal connect after switching to peripheral 2015-03-18 16:15:14 +01:00
core USB: usbfs: don't leak kernel data in siginfo 2015-02-24 08:38:46 -08:00
dwc2 usb: dwc2: host: fix dwc2 disconnect bug 2015-03-10 15:48:29 -05:00
dwc3 usb: dwc3: dwc3-omap: Fix disable IRQ 2015-02-23 09:36:34 -06:00
early
gadget USB / PHY driver fixes for 4.0-rc5 2015-03-22 11:33:55 -07:00
host usb: xhci: handle Config Error Change (CEC) in xhci driver 2015-03-23 21:51:12 +01:00
image USB: use %*ph specifier in mikrotek driver 2015-01-09 11:37:18 -08:00
isp1760 usb: isp1760: add peripheral/device controller chip id 2015-03-09 10:49:46 -05:00
misc USB: use %*ph specifier in uss720 driver 2015-01-09 11:37:18 -08:00
mon
musb usb: musb: fix Kconfig regression 2015-03-09 10:44:35 -05:00
phy usb: phy: am335x-control: check return value of bus_find_device 2015-03-10 16:28:44 -05:00
renesas_usbhs usb: renesas: fix extcon dependency 2015-02-23 09:14:33 -06:00
serial USB fixes for 4.0-rc3 2015-03-08 12:47:18 -07:00
storage uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices 2015-03-18 16:15:14 +01:00
usbip usbip: vhci_hcd: use HUB_CHAR_* 2015-01-25 21:02:33 +08:00
wusbcore USB patches for 3.20-rc1 2015-02-15 10:24:55 -08:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.