forked from Minki/linux
d5341942d7
Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: "David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: Paul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
112 lines
4.0 KiB
C
112 lines
4.0 KiB
C
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/io.h>
|
|
#include "pci-sh4.h"
|
|
|
|
int __init pcibios_map_platform_irq(const struct pci_dev *, u8 slot, u8 pin)
|
|
{
|
|
switch (slot) {
|
|
case 0: return 13;
|
|
case 1: return 13; /* AMD Ethernet controller */
|
|
case 2: return -1;
|
|
case 3: return -1;
|
|
case 4: return -1;
|
|
default:
|
|
printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
|
|
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
|
|
|
|
/*
|
|
* Only long word accesses of the PCIC's internal local registers and the
|
|
* configuration registers from the CPU is supported.
|
|
*/
|
|
#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
|
|
#define PCIC_READ(x) readl(PCI_REG(x))
|
|
|
|
/*
|
|
* Description: This function sets up and initializes the pcic, sets
|
|
* up the BARS, maps the DRAM into the address space etc, etc.
|
|
*/
|
|
int pci_fixup_pcic(struct pci_channel *chan)
|
|
{
|
|
unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
|
|
unsigned short bcr2;
|
|
|
|
/*
|
|
* Initialize the slave bus controller on the pcic. The values used
|
|
* here should not be hardcoded, but they should be taken from the bsc
|
|
* on the processor, to make this function as generic as possible.
|
|
* (i.e. Another sbc may usr different SDRAM timing settings -- in order
|
|
* for the pcic to work, its settings need to be exactly the same.)
|
|
*/
|
|
bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
|
|
bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
|
|
wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
|
|
wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
|
|
wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
|
|
mcr = (*(volatile unsigned long*)(SH7751_MCR));
|
|
|
|
bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
|
|
(*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
|
|
|
|
bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
|
|
PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
|
|
PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
|
|
PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
|
|
PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
|
|
PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
|
|
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
|
|
PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
|
|
|
|
|
|
/* Enable all interrupts, so we know what to fix */
|
|
PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
|
|
PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
|
|
|
|
/* Set up standard PCI config registers */
|
|
PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
|
|
PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
|
|
PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
|
|
PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
|
|
PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
|
|
PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
|
|
PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
|
|
PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
|
|
PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
|
|
PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
|
|
|
|
/* Now turn it on... */
|
|
PCIC_WRITE(SH7751_PCICR, 0xa5000001);
|
|
|
|
/*
|
|
* Set PCIMBR and PCIIOBR here, assuming a single window
|
|
* (16M MEM, 256K IO) is enough. If a larger space is
|
|
* needed, the readx/writex and inx/outx functions will
|
|
* have to do more (e.g. setting registers for each call).
|
|
*/
|
|
|
|
/*
|
|
* Set the MBR so PCI address is one-to-one with window,
|
|
* meaning all calls go straight through... use BUG_ON to
|
|
* catch erroneous assumption.
|
|
*/
|
|
BUG_ON(chan->resources[1].start != SH7751_PCI_MEMORY_BASE);
|
|
|
|
PCIC_WRITE(SH7751_PCIMBR, chan->resources[1].start);
|
|
|
|
/* Set IOBR for window containing area specified in pci.h */
|
|
PCIC_WRITE(SH7751_PCIIOBR, (chan->resources[0].start & SH7751_PCIIOBR_MASK));
|
|
|
|
/* All done, may as well say so... */
|
|
printk("SH7751 PCI: Finished initialization of the PCI controller\n");
|
|
|
|
return 1;
|
|
}
|