forked from Minki/linux
89127ed381
The problem has its root in the calculation of the set-port offsets (macro MCFGPIO_SETR() in arch/m68k/include/asm/gpio.h), this assumes that all ports have the same offset from the base port address (MCFGPIO_SETR) which is defined in mcf520xsim.h as an alias of MCFGIO_PSETR_BUSCTL. Because the BUSCTL and BE port do not have a set-register (see MCF5208 Reference Manual Page 13-10, Table 13-3) the offset calculations went wrong. Because the BE and BUSCTL port do not seem useful in these parts, as they lack a set register, I removed them and adapted the gpio chip bases which are also used for the offset-calculations. Now both setting and resetting the chip selects works as expected from userland and from the kernelspace. Signed-off-by: Peter Turczak <peter@turczak.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
168 lines
5.7 KiB
C
168 lines
5.7 KiB
C
/****************************************************************************/
|
|
|
|
/*
|
|
* m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
|
|
*
|
|
* (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
|
|
*/
|
|
|
|
/****************************************************************************/
|
|
#ifndef m520xsim_h
|
|
#define m520xsim_h
|
|
/****************************************************************************/
|
|
|
|
#define CPU_NAME "COLDFIRE(m520x)"
|
|
#define CPU_INSTR_PER_JIFFY 3
|
|
#define MCF_BUSCLK (MCF_CLK / 2)
|
|
|
|
#include <asm/m52xxacr.h>
|
|
|
|
/*
|
|
* Define the 520x SIM register set addresses.
|
|
*/
|
|
#define MCFICM_INTC0 0xFC048000 /* Base for Interrupt Ctrl 0 */
|
|
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
|
|
#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
|
|
#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
|
|
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
|
|
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
|
|
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
|
|
#define MCFINTC_SIMR 0x1c /* Set interrupt mask 0-63 */
|
|
#define MCFINTC_CIMR 0x1d /* Clear interrupt mask 0-63 */
|
|
#define MCFINTC_ICR0 0x40 /* Base ICR register */
|
|
|
|
/*
|
|
* The common interrupt controller code just wants to know the absolute
|
|
* address to the SIMR and CIMR registers (not offsets into IPSBAR).
|
|
* The 520x family only has a single INTC unit.
|
|
*/
|
|
#define MCFINTC0_SIMR (MCFICM_INTC0 + MCFINTC_SIMR)
|
|
#define MCFINTC0_CIMR (MCFICM_INTC0 + MCFINTC_CIMR)
|
|
#define MCFINTC0_ICR0 (MCFICM_INTC0 + MCFINTC_ICR0)
|
|
#define MCFINTC1_SIMR (0)
|
|
#define MCFINTC1_CIMR (0)
|
|
#define MCFINTC1_ICR0 (0)
|
|
|
|
#define MCFINT_VECBASE 64
|
|
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
|
|
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
|
|
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
|
|
#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
|
|
#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
|
|
|
|
/*
|
|
* SDRAM configuration registers.
|
|
*/
|
|
#define MCFSIM_SDMR 0xFC0a8000 /* SDRAM Mode/Extended Mode Register */
|
|
#define MCFSIM_SDCR 0xFC0a8004 /* SDRAM Control Register */
|
|
#define MCFSIM_SDCFG1 0xFC0a8008 /* SDRAM Configuration Register 1 */
|
|
#define MCFSIM_SDCFG2 0xFC0a800c /* SDRAM Configuration Register 2 */
|
|
#define MCFSIM_SDCS0 0xFC0a8110 /* SDRAM Chip Select 0 Configuration */
|
|
#define MCFSIM_SDCS1 0xFC0a8114 /* SDRAM Chip Select 1 Configuration */
|
|
|
|
/*
|
|
* EPORT and GPIO registers.
|
|
*/
|
|
#define MCFEPORT_EPPAR 0xFC088000
|
|
#define MCFEPORT_EPDDR 0xFC088002
|
|
#define MCFEPORT_EPIER 0xFC088003
|
|
#define MCFEPORT_EPDR 0xFC088004
|
|
#define MCFEPORT_EPPDR 0xFC088005
|
|
#define MCFEPORT_EPFR 0xFC088006
|
|
|
|
#define MCFGPIO_PODR_BUSCTL 0xFC0A4000
|
|
#define MCFGPIO_PODR_BE 0xFC0A4001
|
|
#define MCFGPIO_PODR_CS 0xFC0A4002
|
|
#define MCFGPIO_PODR_FECI2C 0xFC0A4003
|
|
#define MCFGPIO_PODR_QSPI 0xFC0A4004
|
|
#define MCFGPIO_PODR_TIMER 0xFC0A4005
|
|
#define MCFGPIO_PODR_UART 0xFC0A4006
|
|
#define MCFGPIO_PODR_FECH 0xFC0A4007
|
|
#define MCFGPIO_PODR_FECL 0xFC0A4008
|
|
|
|
#define MCFGPIO_PDDR_BUSCTL 0xFC0A400C
|
|
#define MCFGPIO_PDDR_BE 0xFC0A400D
|
|
#define MCFGPIO_PDDR_CS 0xFC0A400E
|
|
#define MCFGPIO_PDDR_FECI2C 0xFC0A400F
|
|
#define MCFGPIO_PDDR_QSPI 0xFC0A4010
|
|
#define MCFGPIO_PDDR_TIMER 0xFC0A4011
|
|
#define MCFGPIO_PDDR_UART 0xFC0A4012
|
|
#define MCFGPIO_PDDR_FECH 0xFC0A4013
|
|
#define MCFGPIO_PDDR_FECL 0xFC0A4014
|
|
|
|
#define MCFGPIO_PPDSDR_CS 0xFC0A401A
|
|
#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401B
|
|
#define MCFGPIO_PPDSDR_QSPI 0xFC0A401C
|
|
#define MCFGPIO_PPDSDR_TIMER 0xFC0A401D
|
|
#define MCFGPIO_PPDSDR_UART 0xFC0A401E
|
|
#define MCFGPIO_PPDSDR_FECH 0xFC0A401F
|
|
#define MCFGPIO_PPDSDR_FECL 0xFC0A4020
|
|
|
|
#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024
|
|
#define MCFGPIO_PCLRR_BE 0xFC0A4025
|
|
#define MCFGPIO_PCLRR_CS 0xFC0A4026
|
|
#define MCFGPIO_PCLRR_FECI2C 0xFC0A4027
|
|
#define MCFGPIO_PCLRR_QSPI 0xFC0A4028
|
|
#define MCFGPIO_PCLRR_TIMER 0xFC0A4029
|
|
#define MCFGPIO_PCLRR_UART 0xFC0A402A
|
|
#define MCFGPIO_PCLRR_FECH 0xFC0A402B
|
|
#define MCFGPIO_PCLRR_FECL 0xFC0A402C
|
|
|
|
/*
|
|
* Generic GPIO support
|
|
*/
|
|
#define MCFGPIO_PODR MCFGPIO_PODR_CS
|
|
#define MCFGPIO_PDDR MCFGPIO_PDDR_CS
|
|
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_CS
|
|
#define MCFGPIO_SETR MCFGPIO_PPDSDR_CS
|
|
#define MCFGPIO_CLRR MCFGPIO_PCLRR_CS
|
|
|
|
#define MCFGPIO_PIN_MAX 80
|
|
#define MCFGPIO_IRQ_MAX 8
|
|
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
|
|
|
|
#define MCF_GPIO_PAR_UART 0xFC0A4036
|
|
#define MCF_GPIO_PAR_FECI2C 0xFC0A4033
|
|
#define MCF_GPIO_PAR_QSPI 0xFC0A4034
|
|
#define MCF_GPIO_PAR_FEC 0xFC0A4038
|
|
|
|
#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
|
|
#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
|
|
|
|
#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
|
|
#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
|
|
|
|
#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
|
|
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
|
|
|
|
/*
|
|
* PIT timer module.
|
|
*/
|
|
#define MCFPIT_BASE1 0xFC080000 /* Base address of TIMER1 */
|
|
#define MCFPIT_BASE2 0xFC084000 /* Base address of TIMER2 */
|
|
|
|
/*
|
|
* UART module.
|
|
*/
|
|
#define MCFUART_BASE1 0xFC060000 /* Base address of UART1 */
|
|
#define MCFUART_BASE2 0xFC064000 /* Base address of UART2 */
|
|
#define MCFUART_BASE3 0xFC068000 /* Base address of UART2 */
|
|
|
|
/*
|
|
* FEC module.
|
|
*/
|
|
#define MCFFEC_BASE 0xFC030000 /* Base of FEC ethernet */
|
|
#define MCFFEC_SIZE 0x800 /* Register set size */
|
|
|
|
/*
|
|
* Reset Control Unit.
|
|
*/
|
|
#define MCF_RCR 0xFC0A0000
|
|
#define MCF_RSR 0xFC0A0001
|
|
|
|
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
|
|
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
|
|
|
|
/****************************************************************************/
|
|
#endif /* m520xsim_h */
|