leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
91927a9b35
linux/drivers/bluetooth
History
Chen-Yu Tsai 91927a9b35 Bluetooth: hci_bcm: Wait for device to come out of reset after power on 
The datasheets for BCM20702 and BCM43438 both have power up time
sequence graphs, however they are slightly different. Both chips
also have an internal power-on-reset, which holds the chip in reset
for a short time after the regulators are enabled.

For the BCM20702, the time period from when the regulators are enabled,
until the chip settles and comes out of sleep state, is 6564 ~ 8171 us.

For the BCM43438, the graph only shows the time period from when the
regulators are enabled until the chip responds by driving the host's
CTS line low, assuming the host has already driven its RTS line low.
This is shown to be 6.5 sleep cycles, with the sleep clock at 32.768
kHz. This is around 2 ms.

Wait a full 10 ms after the regulators are enabled to account for signal
rising times.

Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-12-19 00:28:39 +01:00
..
ath3k.c Bluetooth: ath3k: add more information to error message 2018-09-28 19:27:50 +02:00
bcm203x.c Bluetooth: mark expected switch fall-throughs 2017-10-14 09:25:51 +02:00
bfusb.c bluetooth: bfusb: Replace GFP_ATOMIC with GFP_KERNEL in bfusb_send_frame() 2018-07-23 18:05:00 +02:00
bluecard_cs.c bluetooth: bluecard_cs: Replace GFP_ATOMIC with GFP_KERNEL in bluecard_hci_set_baud_rate() 2018-07-23 18:05:00 +02:00
bpa10x.c bluetooth: bpa10x: Replace GFP_ATOMIC with GFP_KERNEL in bpa10x_send_frame() 2018-07-23 18:05:00 +02:00
bt3c_cs.c Bluetooth: bt3c_cs: Fix obsolete function 2018-09-27 12:57:39 +02:00
btbcm.c Bluetooth: btbcm: Add entry for BCM4335C0 UART bluetooth 2018-09-27 12:49:38 +02:00
btbcm.h Bluetooth: btbcm: Allow using btbcm_initialize() for reinit 2018-05-18 06:37:51 +02:00
btintel.c Bluetooth: btintel: Create common function for firmware download 2018-01-25 09:28:40 +01:00
btintel.h Bluetooth: btintel: Create common function for firmware download 2018-01-25 09:28:40 +01:00
btmrvl_debugfs.c Bluetooth: btmrvl: Re-use kstrtol_from_user() 2018-05-30 08:16:05 +02:00
btmrvl_drv.h Bluetooth: btmrvl: support sysfs initiated firmware coredump 2018-05-29 15:59:50 +02:00
btmrvl_main.c Bluetooth: btmrvl: support sysfs initiated firmware coredump 2018-05-29 15:59:50 +02:00
btmrvl_sdio.c bluetooth: btmrvl_sdio: Replace GFP_ATOMIC with GFP_KERNEL in btmrvl_sdio_card_to_host() 2018-07-23 18:05:00 +02:00
btmrvl_sdio.h btmrvl: add platform specific wakeup interrupt support 2016-05-02 19:26:15 +02:00
btmtkuart.c Bluetooth: mediatek: Fix memory leak 2018-08-21 16:56:20 +02:00
btqca.c Bluetooth: btqca: Introduce HCI_EV_VENDOR and use it 2018-08-06 21:25:05 +03:00
btqca.h Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990 2018-08-03 14:44:07 +02:00
btqcomsmd.c Bluetooth: btqcomsmd: Fix rx/tx stats 2018-05-18 06:37:50 +02:00
btrsi.c Bluetooth: btrsi: fix bt tx timeout issue 2018-09-27 12:53:40 +02:00
btrtl.c Bluetooth: btrtl: Add support for RTL8822C with USB interface 2018-09-27 12:44:47 +02:00
btrtl.h Bluetooth: btrtl: Add support for a config filename postfix 2018-08-03 13:27:46 +02:00
btsdio.c Bluetooth: btsdio: Do not bind to non-removable BCM43430 2018-10-14 10:23:47 +02:00
btusb.c Bluetooth: btusb: Add support for 0cf3:535b QCA_ROME device 2018-10-18 09:30:10 +02:00
btwilink.c Bluetooth: Style fix - align block comments 2017-07-22 08:39:39 +02:00
dtl1_cs.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
h4_recv.h Bluetooth: bpa10x: Use separate h4_recv_buf helper 2018-04-01 14:25:32 +02:00
hci_ag6xx.c Bluetooth: hci_uart: Add diag and address support for Intel/AG6xx 2016-02-29 19:25:22 +02:00
hci_ath.c Bluetooth: hci_ath: Replace mdelay with msleep in ath_wakeup_ar3k 2018-02-07 09:47:04 +01:00
hci_bcm.c Bluetooth: hci_bcm: Wait for device to come out of reset after power on 2018-12-19 00:28:39 +01:00
hci_bcsp.c Bluetooth: Convert timers to use timer_setup() 2017-10-06 20:37:11 +02:00
hci_h4.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
hci_h5.c Bluetooth: Introduce BT_HCIUART_RTL configuration option 2018-08-09 20:48:10 +03:00
hci_intel.c bluetooth: hci_intel: Replace GFP_ATOMIC with GFP_KERNEL in inject_cmd_complete() 2018-07-23 18:05:00 +02:00
hci_ldisc.c Merge branch 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2018-10-24 14:43:41 +01:00
hci_ll.c Bluetooth: hci_serdev: Move serdev_device_close/open into common hci_serdev code 2018-05-30 08:47:42 +02:00
hci_mrvl.c networking: introduce and use skb_put_data() 2017-06-16 11:48:37 -04:00
hci_nokia.c bluetooth: hci_nokia: Don't include linux/unaligned/le_struct.h directly. 2018-06-17 08:38:55 +09:00
hci_qca.c Bluetooth: hci_qca: Add support for controller debug logs. 2018-10-18 09:55:16 +02:00
hci_serdev.c Bluetooth: hci_serdev: Fixed error space required before open paranethesis 2018-09-27 12:40:14 +02:00
hci_uart.h Bluetooth: hci_serdev: Fix HCI_UART_INIT_PENDING not working 2018-05-30 08:49:20 +02:00
hci_vhci.c vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
Kconfig Bluetooth: Make BT_HCIUART_RTL configuration option depend on ACPI 2018-08-21 16:36:12 +02:00
Makefile Bluetooth: mediatek: Add protocol support for MediaTek serial devices 2018-08-07 21:33:25 +02:00