..
ahb.c
drivers/net/wireless: Use wiphy_<level>
2010-07-27 15:14:13 -04:00
ani.c
ath9k: add new ANI implementation for AR9003
2010-06-14 15:39:29 -04:00
ani.h
ath9k: add new ANI implementation for AR9003
2010-06-14 15:39:29 -04:00
ar5008_initvals.h
ath9k_hw: reformat the ar5008, ar9001 and ar9002 initvals to match ar9003
2010-07-02 13:44:34 -04:00
ar5008_phy.c
ath9k_hw: fix invalid extension channel noisefloor readings in HT20
2010-07-26 15:32:42 -04:00
ar9001_initvals.h
ath9k_hw: sync initvals for ar9001 and ar9002 with Atheros
2010-07-02 13:44:35 -04:00
ar9002_calib.c
ath9k_hw: fix a noise floor calibration related race condition
2010-08-04 15:27:37 -04:00
ar9002_hw.c
ath9k_hw: remove initvals for hardware which was never sold
2010-07-14 13:52:46 -04:00
ar9002_initvals.h
ath9k_hw: remove initvals for hardware which was never sold
2010-07-14 13:52:46 -04:00
ar9002_mac.c
ath9k_hw: report the TID in the tx status on AR5008-AR9002
2010-07-12 16:05:38 -04:00
ar9002_phy.c
ath9k_hw: fix invalid extension channel noisefloor readings in HT20
2010-07-26 15:32:42 -04:00
ar9002_phy.h
ath9k_hw: sanitize noise floor values properly on all chips
2010-07-02 13:44:36 -04:00
ar9003_2p0_initvals.h
ath9k_hw: update 5 GHz tx gain tables for femless and high power PA
2010-06-14 15:39:30 -04:00
ar9003_2p2_initvals.h
ath9k_hw: update 5 GHz tx gain tables for femless and high power PA
2010-06-14 15:39:30 -04:00
ar9003_calib.c
ath9k_hw: clean up per-channel calibration data
2010-08-04 15:27:37 -04:00
ar9003_eeprom.c
ath9k_hw: Fix regulatory CTL index usage for AR9003
2010-08-04 15:27:38 -04:00
ar9003_eeprom.h
ath9k_hw: add support for parsing PA predistortion related EEPROM fields
2010-06-14 15:39:32 -04:00
ar9003_hw.c
ath9k_hw: dynamically choose the SERDES array for low power
2010-06-23 15:14:03 -04:00
ar9003_mac.c
drivers/net/wireless/ath/ath9k: Adjust confusing if indentation
2010-08-16 15:26:41 -04:00
ar9003_mac.h
ath9k_hw: report the TID in the tx status on AR5008-AR9002
2010-07-12 16:05:38 -04:00
ar9003_paprd.c
ath9k_hw: clean up per-channel calibration data
2010-08-04 15:27:37 -04:00
ar9003_phy.c
ath9k_hw: fix analog shift register writes on AR9003
2010-08-04 15:27:37 -04:00
ar9003_phy.h
ath9k_hw: add register definitions related to PA predistortion
2010-06-14 15:39:32 -04:00
ath9k.h
ath9k: shorten the calibration interval during strong interference
2010-08-16 15:26:39 -04:00
beacon.c
ath9k: use AP beacon miss as a trigger for fast recalibration
2010-08-16 15:26:39 -04:00
btcoex.c
btcoex.h
ath9k: Fix wifi disconnection when collocated bt scan is active
2010-01-22 16:11:32 -05:00
calib.c
ath9k: use AP beacon miss as a trigger for fast recalibration
2010-08-16 15:26:39 -04:00
calib.h
ath9k: use AP beacon miss as a trigger for fast recalibration
2010-08-16 15:26:39 -04:00
common.c
ath9k: fix crash with WEP in ad-hoc mode
2010-07-02 13:44:38 -04:00
common.h
ath9k_common: Move count_streams to common module
2010-06-04 16:00:39 -04:00
debug.c
ath9k: add a debugfs entry for ignoring CCA on the extension channel in HT40
2010-06-14 15:39:31 -04:00
debug.h
ath9k: enable the baseband watchdog events for AR9003
2010-06-02 16:13:00 -04:00
eeprom_4k.c
ath9k: remove unneeded calculation of minimal calibration power
2010-07-14 13:52:45 -04:00
eeprom_9287.c
ath9k_htc: load proper firmware for device ID 7015
2010-08-13 13:46:20 -04:00
eeprom_def.c
ath9k: remove unneeded calculation of minimal calibration power
2010-07-14 13:52:45 -04:00
eeprom.c
ath9k_hw: Cleanup TX power calculation for AR9287
2010-06-03 14:10:46 -04:00
eeprom.h
ath9k_htc: load proper firmware for device ID 7015
2010-08-13 13:46:20 -04:00
gpio.c
ath9k: Add a module parameter to disable led blinking.
2010-06-23 15:14:05 -04:00
hif_usb.c
ath9k_htc: load proper firmware for device ID 7015
2010-08-13 13:46:20 -04:00
hif_usb.h
ath9k_htc: Add support for AR7010
2010-06-04 16:00:39 -04:00
htc_drv_beacon.c
ath9k_htc: use common WMM AC definitions instead of ath9k ones
2010-06-14 15:39:30 -04:00
htc_drv_init.c
ath9k_htc: load proper firmware for device ID 7015
2010-08-13 13:46:20 -04:00
htc_drv_main.c
ath9k_htc: Fix disconnect issue in HT40 mode.
2010-08-13 13:46:19 -04:00
htc_drv_txrx.c
ath9k_htc: fix panic on packet injection using airbase-ng tool.
2010-08-11 16:24:43 -04:00
htc_hst.c
ath9k_htc: Configure credit size for AR7010
2010-06-04 16:00:39 -04:00
htc_hst.h
ath9k_htc: Fix array overflow
2010-05-12 16:39:06 -04:00
htc.h
ath9k_hw: clean up per-channel calibration data
2010-08-04 15:27:37 -04:00
hw-ops.h
ath9k: merge noisefloor load implementations
2010-07-12 16:05:39 -04:00
hw.c
ath9k_hw: clean up per-channel calibration data
2010-08-04 15:27:37 -04:00
hw.h
ath9k: use AP beacon miss as a trigger for fast recalibration
2010-08-16 15:26:39 -04:00
init.c
ath9k: fix panic while cleaning up virtaul wifis
2010-07-14 13:52:45 -04:00
Kconfig
ath9k_htc: Support for AR9271 chipset.
2010-03-23 16:50:17 -04:00
mac.c
ath9k_hw: avoid setting cwmin/cwmax to 0 for IBSS for AR9003
2010-06-15 16:02:22 -04:00
mac.h
ath9k_hw: report the TID in the tx status on AR5008-AR9002
2010-07-12 16:05:38 -04:00
main.c
ath9k: shorten the calibration interval during strong interference
2010-08-16 15:26:39 -04:00
Makefile
ath9k_hw: add functions for controlling PA predistortion calibration
2010-06-14 15:39:32 -04:00
pci.c
drivers/net/wireless: Use wiphy_<level>
2010-07-27 15:14:13 -04:00
phy.h
ath9k_hw: add OFDM spur mitigation for AR9003
2010-04-16 15:43:38 -04:00
rc.c
ath9k: remove unused base_index from rate table.
2010-07-27 14:59:59 -04:00
rc.h
ath9k: remove unused base_index from rate table.
2010-07-27 14:59:59 -04:00
recv.c
ath9k: fix erased ieee80211_rx_status.mactime
2010-08-04 15:28:37 -04:00
reg.h
ath9k_htc: load proper firmware for device ID 7015
2010-08-13 13:46:20 -04:00
virtual.c
ath9k: Fix inconsistency between txq->stopped and the actual queue state
2010-07-26 15:32:41 -04:00
wmi.c
ath9k: cleanup: remove unneeded null check
2010-06-02 16:13:33 -04:00
wmi.h
ath9k_htc: Increase WMI timeout value
2010-04-26 14:21:20 -04:00
xmit.c
ath9k: remove duplicate get_hw_crypto_keytype()
2010-08-16 15:26:41 -04:00