7f464532b0
Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Stephen Boyd <sboyd@kernel.org> # clock Acked-by: Lee Jones <lee.jones@linaro.org>
54 lines
1.7 KiB
YAML
54 lines
1.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/proximity/parallax-ping.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Parallax PING))) and LaserPING range finder
|
|
|
|
maintainers:
|
|
- Andreas Klinger <ak@it-klinger.de>
|
|
|
|
description: |
|
|
Bit-banging driver using one GPIO:
|
|
- ping-gpios is raised by the driver to start measurement
|
|
- direction of ping-gpio is then switched into input with an interrupt
|
|
for receiving distance value as PWM signal
|
|
|
|
Specifications about the devices can be found at:
|
|
http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
|
|
http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- parallax,ping
|
|
- parallax,laserping
|
|
|
|
ping-gpios:
|
|
description:
|
|
Definition of the GPIO for the triggering and echo (output and input)
|
|
This GPIO is set for about 5 us by the driver to tell the device it
|
|
should initiate the measurement cycle. Afterwards the GPIO is switched
|
|
to input direction with an interrupt. The device sets it and the
|
|
length of the input signal corresponds to the measured distance.
|
|
It needs to be an GPIO which is able to deliver an interrupt because
|
|
the time between two interrupts is measured in the driver.
|
|
See Documentation/devicetree/bindings/gpio/gpio.txt for information
|
|
on how to specify a consumer gpio.
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- ping-gpios
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
proximity {
|
|
compatible = "parallax,laserping";
|
|
ping-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
};
|