forked from Minki/linux
2a3e487a3e
The recent changes to switch SoCs to boot with ti-sysc interconnect target module driver and genpd caused few regressions: - The omap_prm reset driver needs to clear any reset bits deasserted by the bootloader or kexec boot for the three reset bit cases. Otherwise we can have an oops with accelerators starting to boot with potentially unconfigured MMU for example - Custom kernel configs are not automatically selecting simple-pm-bus driver that we now need to probe interconnects so we need to select it always - We are not passing legacy platform data in auxdata with simple-pm-bus like we do for simple-bus. We need to pass auxdata to simple-pm-bus so it can pass it to of_platform_populate() Then recent RCU changes started causing splats for cpuidle44xx that now need RCU_NONIDLE added to the calls in several places And then we have few device specific fixes: - We need to remove legacy spi-cs-hig for gta04 display to work, and set the gpio to active low - Omap1 specific ohci-omap needs to call gpio_free() - Droid4 needs to use padconf interrupt for the slider as the edge gpio interrupts may be lost for deeper idle states -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmASZqMRHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXO7Mw/+NeWn3pX/qrikfnHEnRLCnfaqQcb8BRm+ mbUmTQMKhncIOhL3quiktXwgP2sdWsoZNeZ2GzEe/OnIl17Q77YDgxaf5npd31lg 3JRC/rb3zvcr/dQzOogFXQak2P+eZaUIZKRfIh6KY/okX1SQ4dx4WZBdeaypgP0p qzrbaUUJ11c+kWgvOnPmzPKCL/oEAG88lAWoSuLxkvVjtTa8UMxUfYWYKZjypM55 a1WZGXNAEj1HZxH5lxvCYfPf6U8nYyU567uiBKOsJHaVQSWDVzFVHfgE1QcExbtL Ujz3IEoquWLzVOaLppokuu4IIUoGm2T18+FthCO5NUsr32YkapVNccfhOlQHPVZB 7gtkGjUt1s8zahVMM1NctHxH1pti6/03Vin7hzxYIu4mJfYSnW7wOHrl/1b3j5Z0 h9yUETborMtdT9BSgvJfzEndpi6Tml9ICSvduMTM7fCvJPLFSCF1ElzH506YkbMt R66iEfRYZUo6YIsrXLPDsLp+/Ywen5OvbOVO0rJ0q6Kdz0QGKJ+iNxbjjJxM8IXN mT4h3rwPQfSJUjhRAAVzIx7ybbNqUwq0IxISemqsYiTzqMngsrvCE357mQ+lFBRW PasdMIonMhS2ZWkZDe48hblM2SafCGfdbnUUAULUyJH3emDYrnVzLPhJiNsnyHUy WTmYpIi68SM= =KgUu -----END PGP SIGNATURE----- Merge tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.11-rc cycle The recent changes to switch SoCs to boot with ti-sysc interconnect target module driver and genpd caused few regressions: - The omap_prm reset driver needs to clear any reset bits deasserted by the bootloader or kexec boot for the three reset bit cases. Otherwise we can have an oops with accelerators starting to boot with potentially unconfigured MMU for example - Custom kernel configs are not automatically selecting simple-pm-bus driver that we now need to probe interconnects so we need to select it always - We are not passing legacy platform data in auxdata with simple-pm-bus like we do for simple-bus. We need to pass auxdata to simple-pm-bus so it can pass it to of_platform_populate() Then recent RCU changes started causing splats for cpuidle44xx that now need RCU_NONIDLE added to the calls in several places And then we have few device specific fixes: - We need to remove legacy spi-cs-hig for gta04 display to work, and set the gpio to active low - Omap1 specific ohci-omap needs to call gpio_free() - Droid4 needs to use padconf interrupt for the slider as the edge gpio interrupts may be lost for deeper idle states * tag 'omap-for-v5.11/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts; gta04: SPI panel chip select is active low soc: ti: omap-prm: Fix boot time errors for rst_map_012 bits 0 and 1 ARM: OMAP1: OSK: fix ohci-omap breakage DTS: ARM: gta04: remove legacy spi-cs-high to make display work again Link: https://lore.kernel.org/r/pull-1611818709-243493@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|---|---|---|
| .. | ||
| fsl-mc | ||
| mhi | ||
| arm-cci.c | ||
| arm-integrator-lm.c | ||
| brcmstb_gisb.c | ||
| bt1-apb.c | ||
| bt1-axi.c | ||
| da8xx-mstpri.c | ||
| hisi_lpc.c | ||
| imx-weim.c | ||
| Kconfig | ||
| Makefile | ||
| mips_cdmm.c | ||
| moxtet.c | ||
| mvebu-mbus.c | ||
| omap_l3_noc.c | ||
| omap_l3_noc.h | ||
| omap_l3_smx.c | ||
| omap_l3_smx.h | ||
| omap-ocp2scp.c | ||
| qcom-ebi2.c | ||
| simple-pm-bus.c | ||
| sun50i-de2.c | ||
| sunxi-rsb.c | ||
| tegra-aconnect.c | ||
| tegra-gmi.c | ||
| ti-pwmss.c | ||
| ti-sysc.c | ||
| ts-nbus.c | ||
| uniphier-system-bus.c | ||
| vexpress-config.c | ||