leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
90363ddf0a
linux/arch/powerpc/boot/dts/kmeter1.dts
Holger Brunck 93e2b95c81 powerpc/83xx: rename and update kmeter1 
Beside the MPC 8360 based board kmeter1 other km83xx boards
from keymile will follow. Therefore the board specific naming
kmeter1 for functions and files were replaced with km83xx.
Additionally some updates were made:
    - update defconfig for 2.6.38
    - rework flash partitioning in dts file
    - add gpio controller for qe_pio_c in dts

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15 10:06:37 -05:00

533 lines
13 KiB
Plaintext
Raw Blame History

/*
* Keymile KMETER1 Device Tree Source
*
* 2008-2011 DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "KMETER1";
compatible = "keymile,KMETER1";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet_piggy2;
ethernet1 = &enet_estar1;
ethernet2 = &enet_estar2;
ethernet3 = &enet_eth1;
ethernet4 = &enet_eth2;
ethernet5 = &enet_eth3;
ethernet6 = &enet_eth4;
serial0 = &serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8360@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <32768>; // L1, 32K
i-cache-size = <32768>; // L1, 32K
timebase-frequency = <0>; /* Filled in by U-Boot */
bus-frequency = <0>; /* Filled in by U-Boot */
clock-frequency = <0>; /* Filled in by U-Boot */
};
};
memory {
device_type = "memory";
reg = <0 0>; /* Filled in by U-Boot */
};
soc8360@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8360-immr", "simple-bus";
ranges = <0x0 0xe0000000 0x00200000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; /* Filled in by U-Boot */
pmc: power@b00 {
compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl,mpc8313-i2c","fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <400000>;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
ipic: pic@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
};
par_io@1400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1400 0x100>;
compatible = "fsl,mpc8360-par_io";
num-ports = <7>;
qe_pio_c: gpio-controller@30 {
#gpio-cells = <2>;
compatible = "fsl,mpc8360-qe-pario-bank",
"fsl,mpc8323-qe-pario-bank";
reg = <0x1430 0x18>;
gpio-controller;
};
pio_ucc1: ucc_pin@0 {
reg = <0>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
0 3 1 0 1 0 /* TxD0 */
0 4 1 0 1 0 /* TxD1 */
0 5 1 0 1 0 /* TxD2 */
0 6 1 0 1 0 /* TxD3 */
0 9 2 0 1 0 /* RxD0 */
0 10 2 0 1 0 /* RxD1 */
0 11 2 0 1 0 /* RxD2 */
0 12 2 0 1 0 /* RxD3 */
0 7 1 0 1 0 /* TX_EN */
0 8 1 0 1 0 /* TX_ER */
0 15 2 0 1 0 /* RX_DV */
0 16 2 0 1 0 /* RX_ER */
0 0 2 0 1 0 /* RX_CLK */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0 /* GTX125 - CLK9 */
>;
};
pio_ucc2: ucc_pin@1 {
reg = <1>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
0 17 1 0 1 0 /* TxD0 */
0 18 1 0 1 0 /* TxD1 */
0 19 1 0 1 0 /* TxD2 */
0 20 1 0 1 0 /* TxD3 */
0 23 2 0 1 0 /* RxD0 */
0 24 2 0 1 0 /* RxD1 */
0 25 2 0 1 0 /* RxD2 */
0 26 2 0 1 0 /* RxD3 */
0 21 1 0 1 0 /* TX_EN */
0 22 1 0 1 0 /* TX_ER */
0 29 2 0 1 0 /* RX_DV */
0 30 2 0 1 0 /* RX_ER */
0 31 2 0 1 0 /* RX_CLK */
2 2 1 0 2 0 /* GTX_CLK - CLK3 */
2 3 2 0 1 0 /* GTX125 - CLK4 */
>;
};
pio_ucc4: ucc_pin@3 {
reg = <3>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
>;
};
pio_ucc5: ucc_pin@4 {
reg = <4>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
>;
};
pio_ucc6: ucc_pin@5 {
reg = <5>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */
3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */
3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */
3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */
3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */
3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */
3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */
>;
};
pio_ucc7: ucc_pin@6 {
reg = <6>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */
4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */
4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */
4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */
4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */
4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */
4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */
>;
};
pio_ucc8: ucc_pin@7 {
reg = <7>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */
4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */
4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */
4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */
4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */
4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
>;
};
};
qe@100000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe";
ranges = <0x0 0x100000 0x100000>;
reg = <0x100000 0x480>;
clock-frequency = <0>; /* Filled in by U-Boot */
brg-frequency = <0>; /* Filled in by U-Boot */
bus-frequency = <0>; /* Filled in by U-Boot */
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x0000c000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0xc000>;
};
};
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
enet_estar1: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk9";
phy-handle = <&phy_estar1>;
phy-connection-type = "rgmii-id";
pio-handle = <&pio_ucc1>;
};
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
enet_estar2: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk4";
phy-handle = <&phy_estar2>;
phy-connection-type = "rgmii-id";
pio-handle = <&pio_ucc2>;
};
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
enet_piggy2: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
phy-handle = <&phy_piggy2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc4>;
};
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
enet_eth1: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth1>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc5>;
};
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
enet_eth2: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <6>;
reg = <0x3400 0x200>;
interrupts = <41>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc6>;
};
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
enet_eth3: ucc@2600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <7>;
reg = <0x2600 0x200>;
interrupts = <42>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth3>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc7>;
};
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
enet_eth4: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <8>;
reg = <0x3600 0x200>;
interrupts = <43>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth4>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc8>;
};
mdio@3320 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3320 0x18>;
compatible = "fsl,ucc-mdio";
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
phy_piggy2: ethernet-phy@00 {
reg = <0x0>;
};
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
phy_eth1: ethernet-phy@08 {
reg = <0x08>;
};
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
phy_eth2: ethernet-phy@09 {
reg = <0x09>;
};
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
phy_eth3: ethernet-phy@0a {
reg = <0x0a>;
};
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
phy_eth4: ethernet-phy@0b {
reg = <0x0b>;
};
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
phy_estar1: ethernet-phy@10 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x10>;
};
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
phy_estar2: ethernet-phy@11 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x11>;
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
big-endian;
interrupts = <
32 0x8
33 0x8
34 0x8
35 0x8
40 0x8
41 0x8
42 0x8
43 0x8
>;
interrupt-parent = <&ipic>;
};
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */
1 0 0xe8000000 0x01000000 /* LB 1 */
3 0 0xa0000000 0x10000000>; /* LB 3 */
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
bank-width = <2>;
partition@0 { /* 768KB */
label = "u-boot";
reg = <0 0xC0000>;
};
partition@c0000 { /* 128KB */
label = "env";
reg = <0xC0000 0x20000>;
};
partition@e0000 { /* 128KB */
label = "envred";
reg = <0xE0000 0x20000>;
};
partition@100000 { /* 64512KB */
label = "ubi0";
reg = <0x100000 0x3F00000>;
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink