forked from Minki/linux
639b421b91
Needed for interaction with the nommu code in x86-64 which will return bad_dma_address if the address exceeds dma_mask. Cc: netdev@vger.kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2168 lines
52 KiB
C
2168 lines
52 KiB
C
/* b44.c: Broadcom 4400 device driver.
|
|
*
|
|
* Copyright (C) 2002 David S. Miller (davem@redhat.com)
|
|
* Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
|
|
* Copyright (C) 2006 Broadcom Corporation.
|
|
*
|
|
* Distribute under GPL.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/types.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include "b44.h"
|
|
|
|
#define DRV_MODULE_NAME "b44"
|
|
#define PFX DRV_MODULE_NAME ": "
|
|
#define DRV_MODULE_VERSION "1.00"
|
|
#define DRV_MODULE_RELDATE "Apr 7, 2006"
|
|
|
|
#define B44_DEF_MSG_ENABLE \
|
|
(NETIF_MSG_DRV | \
|
|
NETIF_MSG_PROBE | \
|
|
NETIF_MSG_LINK | \
|
|
NETIF_MSG_TIMER | \
|
|
NETIF_MSG_IFDOWN | \
|
|
NETIF_MSG_IFUP | \
|
|
NETIF_MSG_RX_ERR | \
|
|
NETIF_MSG_TX_ERR)
|
|
|
|
/* length of time before we decide the hardware is borked,
|
|
* and dev->tx_timeout() should be called to fix the problem
|
|
*/
|
|
#define B44_TX_TIMEOUT (5 * HZ)
|
|
|
|
/* hardware minimum and maximum for a single frame's data payload */
|
|
#define B44_MIN_MTU 60
|
|
#define B44_MAX_MTU 1500
|
|
|
|
#define B44_RX_RING_SIZE 512
|
|
#define B44_DEF_RX_RING_PENDING 200
|
|
#define B44_RX_RING_BYTES (sizeof(struct dma_desc) * \
|
|
B44_RX_RING_SIZE)
|
|
#define B44_TX_RING_SIZE 512
|
|
#define B44_DEF_TX_RING_PENDING (B44_TX_RING_SIZE - 1)
|
|
#define B44_TX_RING_BYTES (sizeof(struct dma_desc) * \
|
|
B44_TX_RING_SIZE)
|
|
#define B44_DMA_MASK 0x3fffffff
|
|
|
|
#define TX_RING_GAP(BP) \
|
|
(B44_TX_RING_SIZE - (BP)->tx_pending)
|
|
#define TX_BUFFS_AVAIL(BP) \
|
|
(((BP)->tx_cons <= (BP)->tx_prod) ? \
|
|
(BP)->tx_cons + (BP)->tx_pending - (BP)->tx_prod : \
|
|
(BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
|
|
#define NEXT_TX(N) (((N) + 1) & (B44_TX_RING_SIZE - 1))
|
|
|
|
#define RX_PKT_BUF_SZ (1536 + bp->rx_offset + 64)
|
|
#define TX_PKT_BUF_SZ (B44_MAX_MTU + ETH_HLEN + 8)
|
|
|
|
/* minimum number of free TX descriptors required to wake up TX process */
|
|
#define B44_TX_WAKEUP_THRESH (B44_TX_RING_SIZE / 4)
|
|
|
|
static char version[] __devinitdata =
|
|
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
|
|
MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_MODULE_VERSION);
|
|
|
|
static int b44_debug = -1; /* -1 == use B44_DEF_MSG_ENABLE as value */
|
|
module_param(b44_debug, int, 0);
|
|
MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
|
|
|
|
static struct pci_device_id b44_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
|
|
{ } /* terminate list with empty entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, b44_pci_tbl);
|
|
|
|
static void b44_halt(struct b44 *);
|
|
static void b44_init_rings(struct b44 *);
|
|
static void b44_init_hw(struct b44 *);
|
|
|
|
static int dma_desc_align_mask;
|
|
static int dma_desc_sync_size;
|
|
|
|
static const char b44_gstrings[][ETH_GSTRING_LEN] = {
|
|
#define _B44(x...) # x,
|
|
B44_STAT_REG_DECLARE
|
|
#undef _B44
|
|
};
|
|
|
|
static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev,
|
|
dma_addr_t dma_base,
|
|
unsigned long offset,
|
|
enum dma_data_direction dir)
|
|
{
|
|
dma_sync_single_range_for_device(&pdev->dev, dma_base,
|
|
offset & dma_desc_align_mask,
|
|
dma_desc_sync_size, dir);
|
|
}
|
|
|
|
static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev,
|
|
dma_addr_t dma_base,
|
|
unsigned long offset,
|
|
enum dma_data_direction dir)
|
|
{
|
|
dma_sync_single_range_for_cpu(&pdev->dev, dma_base,
|
|
offset & dma_desc_align_mask,
|
|
dma_desc_sync_size, dir);
|
|
}
|
|
|
|
static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
|
|
{
|
|
return readl(bp->regs + reg);
|
|
}
|
|
|
|
static inline void bw32(const struct b44 *bp,
|
|
unsigned long reg, unsigned long val)
|
|
{
|
|
writel(val, bp->regs + reg);
|
|
}
|
|
|
|
static int b44_wait_bit(struct b44 *bp, unsigned long reg,
|
|
u32 bit, unsigned long timeout, const int clear)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
u32 val = br32(bp, reg);
|
|
|
|
if (clear && !(val & bit))
|
|
break;
|
|
if (!clear && (val & bit))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
if (i == timeout) {
|
|
printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit %08x of register "
|
|
"%lx to %s.\n",
|
|
bp->dev->name,
|
|
bit, reg,
|
|
(clear ? "clear" : "set"));
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Sonics SiliconBackplane support routines. ROFL, you should see all the
|
|
* buzz words used on this company's website :-)
|
|
*
|
|
* All of these routines must be invoked with bp->lock held and
|
|
* interrupts disabled.
|
|
*/
|
|
|
|
#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */
|
|
#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */
|
|
|
|
static u32 ssb_get_core_rev(struct b44 *bp)
|
|
{
|
|
return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
|
|
}
|
|
|
|
static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
|
|
{
|
|
u32 bar_orig, pci_rev, val;
|
|
|
|
pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig);
|
|
pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR);
|
|
pci_rev = ssb_get_core_rev(bp);
|
|
|
|
val = br32(bp, B44_SBINTVEC);
|
|
val |= cores;
|
|
bw32(bp, B44_SBINTVEC, val);
|
|
|
|
val = br32(bp, SSB_PCI_TRANS_2);
|
|
val |= SSB_PCI_PREF | SSB_PCI_BURST;
|
|
bw32(bp, SSB_PCI_TRANS_2, val);
|
|
|
|
pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
|
|
|
|
return pci_rev;
|
|
}
|
|
|
|
static void ssb_core_disable(struct b44 *bp)
|
|
{
|
|
if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
|
|
return;
|
|
|
|
bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
|
|
b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
|
|
b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
|
|
bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
|
|
SBTMSLOW_REJECT | SBTMSLOW_RESET));
|
|
br32(bp, B44_SBTMSLOW);
|
|
udelay(1);
|
|
bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
|
|
br32(bp, B44_SBTMSLOW);
|
|
udelay(1);
|
|
}
|
|
|
|
static void ssb_core_reset(struct b44 *bp)
|
|
{
|
|
u32 val;
|
|
|
|
ssb_core_disable(bp);
|
|
bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
|
|
br32(bp, B44_SBTMSLOW);
|
|
udelay(1);
|
|
|
|
/* Clear SERR if set, this is a hw bug workaround. */
|
|
if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
|
|
bw32(bp, B44_SBTMSHIGH, 0);
|
|
|
|
val = br32(bp, B44_SBIMSTATE);
|
|
if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
|
|
bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
|
|
|
|
bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
|
|
br32(bp, B44_SBTMSLOW);
|
|
udelay(1);
|
|
|
|
bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
|
|
br32(bp, B44_SBTMSLOW);
|
|
udelay(1);
|
|
}
|
|
|
|
static int ssb_core_unit(struct b44 *bp)
|
|
{
|
|
#if 0
|
|
u32 val = br32(bp, B44_SBADMATCH0);
|
|
u32 base;
|
|
|
|
type = val & SBADMATCH0_TYPE_MASK;
|
|
switch (type) {
|
|
case 0:
|
|
base = val & SBADMATCH0_BS0_MASK;
|
|
break;
|
|
|
|
case 1:
|
|
base = val & SBADMATCH0_BS1_MASK;
|
|
break;
|
|
|
|
case 2:
|
|
default:
|
|
base = val & SBADMATCH0_BS2_MASK;
|
|
break;
|
|
};
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int ssb_is_core_up(struct b44 *bp)
|
|
{
|
|
return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
|
|
== SBTMSLOW_CLOCK);
|
|
}
|
|
|
|
static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
|
|
{
|
|
u32 val;
|
|
|
|
val = ((u32) data[2]) << 24;
|
|
val |= ((u32) data[3]) << 16;
|
|
val |= ((u32) data[4]) << 8;
|
|
val |= ((u32) data[5]) << 0;
|
|
bw32(bp, B44_CAM_DATA_LO, val);
|
|
val = (CAM_DATA_HI_VALID |
|
|
(((u32) data[0]) << 8) |
|
|
(((u32) data[1]) << 0));
|
|
bw32(bp, B44_CAM_DATA_HI, val);
|
|
bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
|
|
(index << CAM_CTRL_INDEX_SHIFT)));
|
|
b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);
|
|
}
|
|
|
|
static inline void __b44_disable_ints(struct b44 *bp)
|
|
{
|
|
bw32(bp, B44_IMASK, 0);
|
|
}
|
|
|
|
static void b44_disable_ints(struct b44 *bp)
|
|
{
|
|
__b44_disable_ints(bp);
|
|
|
|
/* Flush posted writes. */
|
|
br32(bp, B44_IMASK);
|
|
}
|
|
|
|
static void b44_enable_ints(struct b44 *bp)
|
|
{
|
|
bw32(bp, B44_IMASK, bp->imask);
|
|
}
|
|
|
|
static int b44_readphy(struct b44 *bp, int reg, u32 *val)
|
|
{
|
|
int err;
|
|
|
|
bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
|
|
bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
|
|
(MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
|
|
(bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
|
|
(reg << MDIO_DATA_RA_SHIFT) |
|
|
(MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
|
|
err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
|
|
*val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int b44_writephy(struct b44 *bp, int reg, u32 val)
|
|
{
|
|
bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
|
|
bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
|
|
(MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
|
|
(bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
|
|
(reg << MDIO_DATA_RA_SHIFT) |
|
|
(MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
|
|
(val & MDIO_DATA_DATA)));
|
|
return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
|
|
}
|
|
|
|
/* miilib interface */
|
|
/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
|
|
* due to code existing before miilib use was added to this driver.
|
|
* Someone should remove this artificial driver limitation in
|
|
* b44_{read,write}phy. bp->phy_addr itself is fine (and needed).
|
|
*/
|
|
static int b44_mii_read(struct net_device *dev, int phy_id, int location)
|
|
{
|
|
u32 val;
|
|
struct b44 *bp = netdev_priv(dev);
|
|
int rc = b44_readphy(bp, location, &val);
|
|
if (rc)
|
|
return 0xffffffff;
|
|
return val;
|
|
}
|
|
|
|
static void b44_mii_write(struct net_device *dev, int phy_id, int location,
|
|
int val)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
b44_writephy(bp, location, val);
|
|
}
|
|
|
|
static int b44_phy_reset(struct b44 *bp)
|
|
{
|
|
u32 val;
|
|
int err;
|
|
|
|
err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
|
|
if (err)
|
|
return err;
|
|
udelay(100);
|
|
err = b44_readphy(bp, MII_BMCR, &val);
|
|
if (!err) {
|
|
if (val & BMCR_RESET) {
|
|
printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
|
|
bp->dev->name);
|
|
err = -ENODEV;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
|
|
{
|
|
u32 val;
|
|
|
|
bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE);
|
|
bp->flags |= pause_flags;
|
|
|
|
val = br32(bp, B44_RXCONFIG);
|
|
if (pause_flags & B44_FLAG_RX_PAUSE)
|
|
val |= RXCONFIG_FLOW;
|
|
else
|
|
val &= ~RXCONFIG_FLOW;
|
|
bw32(bp, B44_RXCONFIG, val);
|
|
|
|
val = br32(bp, B44_MAC_FLOW);
|
|
if (pause_flags & B44_FLAG_TX_PAUSE)
|
|
val |= (MAC_FLOW_PAUSE_ENAB |
|
|
(0xc0 & MAC_FLOW_RX_HI_WATER));
|
|
else
|
|
val &= ~MAC_FLOW_PAUSE_ENAB;
|
|
bw32(bp, B44_MAC_FLOW, val);
|
|
}
|
|
|
|
static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
|
|
{
|
|
u32 pause_enab = 0;
|
|
|
|
/* The driver supports only rx pause by default because
|
|
the b44 mac tx pause mechanism generates excessive
|
|
pause frames.
|
|
Use ethtool to turn on b44 tx pause if necessary.
|
|
*/
|
|
if ((local & ADVERTISE_PAUSE_CAP) &&
|
|
(local & ADVERTISE_PAUSE_ASYM)){
|
|
if ((remote & LPA_PAUSE_ASYM) &&
|
|
!(remote & LPA_PAUSE_CAP))
|
|
pause_enab |= B44_FLAG_RX_PAUSE;
|
|
}
|
|
|
|
__b44_set_flow_ctrl(bp, pause_enab);
|
|
}
|
|
|
|
static int b44_setup_phy(struct b44 *bp)
|
|
{
|
|
u32 val;
|
|
int err;
|
|
|
|
if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
|
|
goto out;
|
|
if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
|
|
val & MII_ALEDCTRL_ALLMSK)) != 0)
|
|
goto out;
|
|
if ((err = b44_readphy(bp, B44_MII_TLEDCTRL, &val)) != 0)
|
|
goto out;
|
|
if ((err = b44_writephy(bp, B44_MII_TLEDCTRL,
|
|
val | MII_TLEDCTRL_ENABLE)) != 0)
|
|
goto out;
|
|
|
|
if (!(bp->flags & B44_FLAG_FORCE_LINK)) {
|
|
u32 adv = ADVERTISE_CSMA;
|
|
|
|
if (bp->flags & B44_FLAG_ADV_10HALF)
|
|
adv |= ADVERTISE_10HALF;
|
|
if (bp->flags & B44_FLAG_ADV_10FULL)
|
|
adv |= ADVERTISE_10FULL;
|
|
if (bp->flags & B44_FLAG_ADV_100HALF)
|
|
adv |= ADVERTISE_100HALF;
|
|
if (bp->flags & B44_FLAG_ADV_100FULL)
|
|
adv |= ADVERTISE_100FULL;
|
|
|
|
if (bp->flags & B44_FLAG_PAUSE_AUTO)
|
|
adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
|
|
|
|
if ((err = b44_writephy(bp, MII_ADVERTISE, adv)) != 0)
|
|
goto out;
|
|
if ((err = b44_writephy(bp, MII_BMCR, (BMCR_ANENABLE |
|
|
BMCR_ANRESTART))) != 0)
|
|
goto out;
|
|
} else {
|
|
u32 bmcr;
|
|
|
|
if ((err = b44_readphy(bp, MII_BMCR, &bmcr)) != 0)
|
|
goto out;
|
|
bmcr &= ~(BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100);
|
|
if (bp->flags & B44_FLAG_100_BASE_T)
|
|
bmcr |= BMCR_SPEED100;
|
|
if (bp->flags & B44_FLAG_FULL_DUPLEX)
|
|
bmcr |= BMCR_FULLDPLX;
|
|
if ((err = b44_writephy(bp, MII_BMCR, bmcr)) != 0)
|
|
goto out;
|
|
|
|
/* Since we will not be negotiating there is no safe way
|
|
* to determine if the link partner supports flow control
|
|
* or not. So just disable it completely in this case.
|
|
*/
|
|
b44_set_flow_ctrl(bp, 0, 0);
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void b44_stats_update(struct b44 *bp)
|
|
{
|
|
unsigned long reg;
|
|
u32 *val;
|
|
|
|
val = &bp->hw_stats.tx_good_octets;
|
|
for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) {
|
|
*val++ += br32(bp, reg);
|
|
}
|
|
|
|
/* Pad */
|
|
reg += 8*4UL;
|
|
|
|
for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) {
|
|
*val++ += br32(bp, reg);
|
|
}
|
|
}
|
|
|
|
static void b44_link_report(struct b44 *bp)
|
|
{
|
|
if (!netif_carrier_ok(bp->dev)) {
|
|
printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
|
|
} else {
|
|
printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
|
|
bp->dev->name,
|
|
(bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
|
|
(bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
|
|
|
|
printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
|
|
"%s for RX.\n",
|
|
bp->dev->name,
|
|
(bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
|
|
(bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
|
|
}
|
|
}
|
|
|
|
static void b44_check_phy(struct b44 *bp)
|
|
{
|
|
u32 bmsr, aux;
|
|
|
|
if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
|
|
!b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
|
|
(bmsr != 0xffff)) {
|
|
if (aux & MII_AUXCTRL_SPEED)
|
|
bp->flags |= B44_FLAG_100_BASE_T;
|
|
else
|
|
bp->flags &= ~B44_FLAG_100_BASE_T;
|
|
if (aux & MII_AUXCTRL_DUPLEX)
|
|
bp->flags |= B44_FLAG_FULL_DUPLEX;
|
|
else
|
|
bp->flags &= ~B44_FLAG_FULL_DUPLEX;
|
|
|
|
if (!netif_carrier_ok(bp->dev) &&
|
|
(bmsr & BMSR_LSTATUS)) {
|
|
u32 val = br32(bp, B44_TX_CTRL);
|
|
u32 local_adv, remote_adv;
|
|
|
|
if (bp->flags & B44_FLAG_FULL_DUPLEX)
|
|
val |= TX_CTRL_DUPLEX;
|
|
else
|
|
val &= ~TX_CTRL_DUPLEX;
|
|
bw32(bp, B44_TX_CTRL, val);
|
|
|
|
if (!(bp->flags & B44_FLAG_FORCE_LINK) &&
|
|
!b44_readphy(bp, MII_ADVERTISE, &local_adv) &&
|
|
!b44_readphy(bp, MII_LPA, &remote_adv))
|
|
b44_set_flow_ctrl(bp, local_adv, remote_adv);
|
|
|
|
/* Link now up */
|
|
netif_carrier_on(bp->dev);
|
|
b44_link_report(bp);
|
|
} else if (netif_carrier_ok(bp->dev) && !(bmsr & BMSR_LSTATUS)) {
|
|
/* Link now down */
|
|
netif_carrier_off(bp->dev);
|
|
b44_link_report(bp);
|
|
}
|
|
|
|
if (bmsr & BMSR_RFAULT)
|
|
printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
|
|
bp->dev->name);
|
|
if (bmsr & BMSR_JCD)
|
|
printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
|
|
bp->dev->name);
|
|
}
|
|
}
|
|
|
|
static void b44_timer(unsigned long __opaque)
|
|
{
|
|
struct b44 *bp = (struct b44 *) __opaque;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
b44_check_phy(bp);
|
|
|
|
b44_stats_update(bp);
|
|
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
bp->timer.expires = jiffies + HZ;
|
|
add_timer(&bp->timer);
|
|
}
|
|
|
|
static void b44_tx(struct b44 *bp)
|
|
{
|
|
u32 cur, cons;
|
|
|
|
cur = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
|
|
cur /= sizeof(struct dma_desc);
|
|
|
|
/* XXX needs updating when NETIF_F_SG is supported */
|
|
for (cons = bp->tx_cons; cons != cur; cons = NEXT_TX(cons)) {
|
|
struct ring_info *rp = &bp->tx_buffers[cons];
|
|
struct sk_buff *skb = rp->skb;
|
|
|
|
BUG_ON(skb == NULL);
|
|
|
|
pci_unmap_single(bp->pdev,
|
|
pci_unmap_addr(rp, mapping),
|
|
skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
rp->skb = NULL;
|
|
dev_kfree_skb_irq(skb);
|
|
}
|
|
|
|
bp->tx_cons = cons;
|
|
if (netif_queue_stopped(bp->dev) &&
|
|
TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
|
|
netif_wake_queue(bp->dev);
|
|
|
|
bw32(bp, B44_GPTIMER, 0);
|
|
}
|
|
|
|
/* Works like this. This chip writes a 'struct rx_header" 30 bytes
|
|
* before the DMA address you give it. So we allocate 30 more bytes
|
|
* for the RX buffer, DMA map all of it, skb_reserve the 30 bytes, then
|
|
* point the chip at 30 bytes past where the rx_header will go.
|
|
*/
|
|
static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
|
|
{
|
|
struct dma_desc *dp;
|
|
struct ring_info *src_map, *map;
|
|
struct rx_header *rh;
|
|
struct sk_buff *skb;
|
|
dma_addr_t mapping;
|
|
int dest_idx;
|
|
u32 ctrl;
|
|
|
|
src_map = NULL;
|
|
if (src_idx >= 0)
|
|
src_map = &bp->rx_buffers[src_idx];
|
|
dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
|
|
map = &bp->rx_buffers[dest_idx];
|
|
skb = dev_alloc_skb(RX_PKT_BUF_SZ);
|
|
if (skb == NULL)
|
|
return -ENOMEM;
|
|
|
|
mapping = pci_map_single(bp->pdev, skb->data,
|
|
RX_PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
/* Hardware bug work-around, the chip is unable to do PCI DMA
|
|
to/from anything above 1GB :-( */
|
|
if (dma_mapping_error(mapping) ||
|
|
mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
|
|
/* Sigh... */
|
|
if (!dma_mapping_error(mapping))
|
|
pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
|
|
if (skb == NULL)
|
|
return -ENOMEM;
|
|
mapping = pci_map_single(bp->pdev, skb->data,
|
|
RX_PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (dma_mapping_error(mapping) ||
|
|
mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
|
|
if (!dma_mapping_error(mapping))
|
|
pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
skb->dev = bp->dev;
|
|
skb_reserve(skb, bp->rx_offset);
|
|
|
|
rh = (struct rx_header *)
|
|
(skb->data - bp->rx_offset);
|
|
rh->len = 0;
|
|
rh->flags = 0;
|
|
|
|
map->skb = skb;
|
|
pci_unmap_addr_set(map, mapping, mapping);
|
|
|
|
if (src_map != NULL)
|
|
src_map->skb = NULL;
|
|
|
|
ctrl = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
|
|
if (dest_idx == (B44_RX_RING_SIZE - 1))
|
|
ctrl |= DESC_CTRL_EOT;
|
|
|
|
dp = &bp->rx_ring[dest_idx];
|
|
dp->ctrl = cpu_to_le32(ctrl);
|
|
dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
|
|
|
|
if (bp->flags & B44_FLAG_RX_RING_HACK)
|
|
b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
|
|
dest_idx * sizeof(dp),
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
return RX_PKT_BUF_SZ;
|
|
}
|
|
|
|
static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
|
|
{
|
|
struct dma_desc *src_desc, *dest_desc;
|
|
struct ring_info *src_map, *dest_map;
|
|
struct rx_header *rh;
|
|
int dest_idx;
|
|
u32 ctrl;
|
|
|
|
dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
|
|
dest_desc = &bp->rx_ring[dest_idx];
|
|
dest_map = &bp->rx_buffers[dest_idx];
|
|
src_desc = &bp->rx_ring[src_idx];
|
|
src_map = &bp->rx_buffers[src_idx];
|
|
|
|
dest_map->skb = src_map->skb;
|
|
rh = (struct rx_header *) src_map->skb->data;
|
|
rh->len = 0;
|
|
rh->flags = 0;
|
|
pci_unmap_addr_set(dest_map, mapping,
|
|
pci_unmap_addr(src_map, mapping));
|
|
|
|
if (bp->flags & B44_FLAG_RX_RING_HACK)
|
|
b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma,
|
|
src_idx * sizeof(src_desc),
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
ctrl = src_desc->ctrl;
|
|
if (dest_idx == (B44_RX_RING_SIZE - 1))
|
|
ctrl |= cpu_to_le32(DESC_CTRL_EOT);
|
|
else
|
|
ctrl &= cpu_to_le32(~DESC_CTRL_EOT);
|
|
|
|
dest_desc->ctrl = ctrl;
|
|
dest_desc->addr = src_desc->addr;
|
|
|
|
src_map->skb = NULL;
|
|
|
|
if (bp->flags & B44_FLAG_RX_RING_HACK)
|
|
b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
|
|
dest_idx * sizeof(dest_desc),
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
|
|
RX_PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
}
|
|
|
|
static int b44_rx(struct b44 *bp, int budget)
|
|
{
|
|
int received;
|
|
u32 cons, prod;
|
|
|
|
received = 0;
|
|
prod = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK;
|
|
prod /= sizeof(struct dma_desc);
|
|
cons = bp->rx_cons;
|
|
|
|
while (cons != prod && budget > 0) {
|
|
struct ring_info *rp = &bp->rx_buffers[cons];
|
|
struct sk_buff *skb = rp->skb;
|
|
dma_addr_t map = pci_unmap_addr(rp, mapping);
|
|
struct rx_header *rh;
|
|
u16 len;
|
|
|
|
pci_dma_sync_single_for_cpu(bp->pdev, map,
|
|
RX_PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
rh = (struct rx_header *) skb->data;
|
|
len = cpu_to_le16(rh->len);
|
|
if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
|
|
(rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
|
|
drop_it:
|
|
b44_recycle_rx(bp, cons, bp->rx_prod);
|
|
drop_it_no_recycle:
|
|
bp->stats.rx_dropped++;
|
|
goto next_pkt;
|
|
}
|
|
|
|
if (len == 0) {
|
|
int i = 0;
|
|
|
|
do {
|
|
udelay(2);
|
|
barrier();
|
|
len = cpu_to_le16(rh->len);
|
|
} while (len == 0 && i++ < 5);
|
|
if (len == 0)
|
|
goto drop_it;
|
|
}
|
|
|
|
/* Omit CRC. */
|
|
len -= 4;
|
|
|
|
if (len > RX_COPY_THRESHOLD) {
|
|
int skb_size;
|
|
skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
|
|
if (skb_size < 0)
|
|
goto drop_it;
|
|
pci_unmap_single(bp->pdev, map,
|
|
skb_size, PCI_DMA_FROMDEVICE);
|
|
/* Leave out rx_header */
|
|
skb_put(skb, len+bp->rx_offset);
|
|
skb_pull(skb,bp->rx_offset);
|
|
} else {
|
|
struct sk_buff *copy_skb;
|
|
|
|
b44_recycle_rx(bp, cons, bp->rx_prod);
|
|
copy_skb = dev_alloc_skb(len + 2);
|
|
if (copy_skb == NULL)
|
|
goto drop_it_no_recycle;
|
|
|
|
copy_skb->dev = bp->dev;
|
|
skb_reserve(copy_skb, 2);
|
|
skb_put(copy_skb, len);
|
|
/* DMA sync done above, copy just the actual packet */
|
|
memcpy(copy_skb->data, skb->data+bp->rx_offset, len);
|
|
|
|
skb = copy_skb;
|
|
}
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
skb->protocol = eth_type_trans(skb, bp->dev);
|
|
netif_receive_skb(skb);
|
|
bp->dev->last_rx = jiffies;
|
|
received++;
|
|
budget--;
|
|
next_pkt:
|
|
bp->rx_prod = (bp->rx_prod + 1) &
|
|
(B44_RX_RING_SIZE - 1);
|
|
cons = (cons + 1) & (B44_RX_RING_SIZE - 1);
|
|
}
|
|
|
|
bp->rx_cons = cons;
|
|
bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc));
|
|
|
|
return received;
|
|
}
|
|
|
|
static int b44_poll(struct net_device *netdev, int *budget)
|
|
{
|
|
struct b44 *bp = netdev_priv(netdev);
|
|
int done;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
|
|
/* spin_lock(&bp->tx_lock); */
|
|
b44_tx(bp);
|
|
/* spin_unlock(&bp->tx_lock); */
|
|
}
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
done = 1;
|
|
if (bp->istat & ISTAT_RX) {
|
|
int orig_budget = *budget;
|
|
int work_done;
|
|
|
|
if (orig_budget > netdev->quota)
|
|
orig_budget = netdev->quota;
|
|
|
|
work_done = b44_rx(bp, orig_budget);
|
|
|
|
*budget -= work_done;
|
|
netdev->quota -= work_done;
|
|
|
|
if (work_done >= orig_budget)
|
|
done = 0;
|
|
}
|
|
|
|
if (bp->istat & ISTAT_ERRORS) {
|
|
spin_lock_irq(&bp->lock);
|
|
b44_halt(bp);
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
netif_wake_queue(bp->dev);
|
|
spin_unlock_irq(&bp->lock);
|
|
done = 1;
|
|
}
|
|
|
|
if (done) {
|
|
netif_rx_complete(netdev);
|
|
b44_enable_ints(bp);
|
|
}
|
|
|
|
return (done ? 0 : 1);
|
|
}
|
|
|
|
static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct b44 *bp = netdev_priv(dev);
|
|
u32 istat, imask;
|
|
int handled = 0;
|
|
|
|
spin_lock(&bp->lock);
|
|
|
|
istat = br32(bp, B44_ISTAT);
|
|
imask = br32(bp, B44_IMASK);
|
|
|
|
/* ??? What the fuck is the purpose of the interrupt mask
|
|
* ??? register if we have to mask it out by hand anyways?
|
|
*/
|
|
istat &= imask;
|
|
if (istat) {
|
|
handled = 1;
|
|
|
|
if (unlikely(!netif_running(dev))) {
|
|
printk(KERN_INFO "%s: late interrupt.\n", dev->name);
|
|
goto irq_ack;
|
|
}
|
|
|
|
if (netif_rx_schedule_prep(dev)) {
|
|
/* NOTE: These writes are posted by the readback of
|
|
* the ISTAT register below.
|
|
*/
|
|
bp->istat = istat;
|
|
__b44_disable_ints(bp);
|
|
__netif_rx_schedule(dev);
|
|
} else {
|
|
printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
|
|
dev->name);
|
|
}
|
|
|
|
irq_ack:
|
|
bw32(bp, B44_ISTAT, istat);
|
|
br32(bp, B44_ISTAT);
|
|
}
|
|
spin_unlock(&bp->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void b44_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
|
|
dev->name);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
b44_halt(bp);
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
b44_enable_ints(bp);
|
|
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
struct sk_buff *bounce_skb;
|
|
int rc = NETDEV_TX_OK;
|
|
dma_addr_t mapping;
|
|
u32 len, entry, ctrl;
|
|
|
|
len = skb->len;
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
/* This is a hard error, log it. */
|
|
if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
|
|
netif_stop_queue(dev);
|
|
printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
|
|
dev->name);
|
|
goto err_out;
|
|
}
|
|
|
|
mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
|
|
if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
|
|
/* Chip can't handle DMA to/from >1GB, use bounce buffer */
|
|
if (!dma_mapping_error(mapping))
|
|
pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
|
|
|
|
bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
|
|
GFP_ATOMIC|GFP_DMA);
|
|
if (!bounce_skb)
|
|
goto err_out;
|
|
|
|
mapping = pci_map_single(bp->pdev, bounce_skb->data,
|
|
len, PCI_DMA_TODEVICE);
|
|
if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
|
|
if (!dma_mapping_error(mapping))
|
|
pci_unmap_single(bp->pdev, mapping,
|
|
len, PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_any(bounce_skb);
|
|
goto err_out;
|
|
}
|
|
|
|
memcpy(skb_put(bounce_skb, len), skb->data, skb->len);
|
|
dev_kfree_skb_any(skb);
|
|
skb = bounce_skb;
|
|
}
|
|
|
|
entry = bp->tx_prod;
|
|
bp->tx_buffers[entry].skb = skb;
|
|
pci_unmap_addr_set(&bp->tx_buffers[entry], mapping, mapping);
|
|
|
|
ctrl = (len & DESC_CTRL_LEN);
|
|
ctrl |= DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF;
|
|
if (entry == (B44_TX_RING_SIZE - 1))
|
|
ctrl |= DESC_CTRL_EOT;
|
|
|
|
bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl);
|
|
bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
|
|
|
|
if (bp->flags & B44_FLAG_TX_RING_HACK)
|
|
b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma,
|
|
entry * sizeof(bp->tx_ring[0]),
|
|
DMA_TO_DEVICE);
|
|
|
|
entry = NEXT_TX(entry);
|
|
|
|
bp->tx_prod = entry;
|
|
|
|
wmb();
|
|
|
|
bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
|
|
if (bp->flags & B44_FLAG_BUGGY_TXPTR)
|
|
bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
|
|
if (bp->flags & B44_FLAG_REORDER_BUG)
|
|
br32(bp, B44_DMATX_PTR);
|
|
|
|
if (TX_BUFFS_AVAIL(bp) < 1)
|
|
netif_stop_queue(dev);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
out_unlock:
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
return rc;
|
|
|
|
err_out:
|
|
rc = NETDEV_TX_BUSY;
|
|
goto out_unlock;
|
|
}
|
|
|
|
static int b44_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU)
|
|
return -EINVAL;
|
|
|
|
if (!netif_running(dev)) {
|
|
/* We'll just catch it later when the
|
|
* device is up'd.
|
|
*/
|
|
dev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
b44_halt(bp);
|
|
dev->mtu = new_mtu;
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
b44_enable_ints(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Free up pending packets in all rx/tx rings.
|
|
*
|
|
* The chip has been shut down and the driver detached from
|
|
* the networking, so no interrupts or new tx packets will
|
|
* end up in the driver. bp->lock is not held and we are not
|
|
* in an interrupt context and thus may sleep.
|
|
*/
|
|
static void b44_free_rings(struct b44 *bp)
|
|
{
|
|
struct ring_info *rp;
|
|
int i;
|
|
|
|
for (i = 0; i < B44_RX_RING_SIZE; i++) {
|
|
rp = &bp->rx_buffers[i];
|
|
|
|
if (rp->skb == NULL)
|
|
continue;
|
|
pci_unmap_single(bp->pdev,
|
|
pci_unmap_addr(rp, mapping),
|
|
RX_PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(rp->skb);
|
|
rp->skb = NULL;
|
|
}
|
|
|
|
/* XXX needs changes once NETIF_F_SG is set... */
|
|
for (i = 0; i < B44_TX_RING_SIZE; i++) {
|
|
rp = &bp->tx_buffers[i];
|
|
|
|
if (rp->skb == NULL)
|
|
continue;
|
|
pci_unmap_single(bp->pdev,
|
|
pci_unmap_addr(rp, mapping),
|
|
rp->skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_any(rp->skb);
|
|
rp->skb = NULL;
|
|
}
|
|
}
|
|
|
|
/* Initialize tx/rx rings for packet processing.
|
|
*
|
|
* The chip has been shut down and the driver detached from
|
|
* the networking, so no interrupts or new tx packets will
|
|
* end up in the driver.
|
|
*/
|
|
static void b44_init_rings(struct b44 *bp)
|
|
{
|
|
int i;
|
|
|
|
b44_free_rings(bp);
|
|
|
|
memset(bp->rx_ring, 0, B44_RX_RING_BYTES);
|
|
memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
|
|
|
|
if (bp->flags & B44_FLAG_RX_RING_HACK)
|
|
dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma,
|
|
DMA_TABLE_BYTES,
|
|
PCI_DMA_BIDIRECTIONAL);
|
|
|
|
if (bp->flags & B44_FLAG_TX_RING_HACK)
|
|
dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma,
|
|
DMA_TABLE_BYTES,
|
|
PCI_DMA_TODEVICE);
|
|
|
|
for (i = 0; i < bp->rx_pending; i++) {
|
|
if (b44_alloc_rx_skb(bp, -1, i) < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Must not be invoked with interrupt sources disabled and
|
|
* the hardware shutdown down.
|
|
*/
|
|
static void b44_free_consistent(struct b44 *bp)
|
|
{
|
|
kfree(bp->rx_buffers);
|
|
bp->rx_buffers = NULL;
|
|
kfree(bp->tx_buffers);
|
|
bp->tx_buffers = NULL;
|
|
if (bp->rx_ring) {
|
|
if (bp->flags & B44_FLAG_RX_RING_HACK) {
|
|
dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma,
|
|
DMA_TABLE_BYTES,
|
|
DMA_BIDIRECTIONAL);
|
|
kfree(bp->rx_ring);
|
|
} else
|
|
pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
|
|
bp->rx_ring, bp->rx_ring_dma);
|
|
bp->rx_ring = NULL;
|
|
bp->flags &= ~B44_FLAG_RX_RING_HACK;
|
|
}
|
|
if (bp->tx_ring) {
|
|
if (bp->flags & B44_FLAG_TX_RING_HACK) {
|
|
dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma,
|
|
DMA_TABLE_BYTES,
|
|
DMA_TO_DEVICE);
|
|
kfree(bp->tx_ring);
|
|
} else
|
|
pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
|
|
bp->tx_ring, bp->tx_ring_dma);
|
|
bp->tx_ring = NULL;
|
|
bp->flags &= ~B44_FLAG_TX_RING_HACK;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Must not be invoked with interrupt sources disabled and
|
|
* the hardware shutdown down. Can sleep.
|
|
*/
|
|
static int b44_alloc_consistent(struct b44 *bp)
|
|
{
|
|
int size;
|
|
|
|
size = B44_RX_RING_SIZE * sizeof(struct ring_info);
|
|
bp->rx_buffers = kzalloc(size, GFP_KERNEL);
|
|
if (!bp->rx_buffers)
|
|
goto out_err;
|
|
|
|
size = B44_TX_RING_SIZE * sizeof(struct ring_info);
|
|
bp->tx_buffers = kzalloc(size, GFP_KERNEL);
|
|
if (!bp->tx_buffers)
|
|
goto out_err;
|
|
|
|
size = DMA_TABLE_BYTES;
|
|
bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
|
|
if (!bp->rx_ring) {
|
|
/* Allocation may have failed due to pci_alloc_consistent
|
|
insisting on use of GFP_DMA, which is more restrictive
|
|
than necessary... */
|
|
struct dma_desc *rx_ring;
|
|
dma_addr_t rx_ring_dma;
|
|
|
|
rx_ring = kzalloc(size, GFP_KERNEL);
|
|
if (!rx_ring)
|
|
goto out_err;
|
|
|
|
rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring,
|
|
DMA_TABLE_BYTES,
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
if (dma_mapping_error(rx_ring_dma) ||
|
|
rx_ring_dma + size > B44_DMA_MASK) {
|
|
kfree(rx_ring);
|
|
goto out_err;
|
|
}
|
|
|
|
bp->rx_ring = rx_ring;
|
|
bp->rx_ring_dma = rx_ring_dma;
|
|
bp->flags |= B44_FLAG_RX_RING_HACK;
|
|
}
|
|
|
|
bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
|
|
if (!bp->tx_ring) {
|
|
/* Allocation may have failed due to pci_alloc_consistent
|
|
insisting on use of GFP_DMA, which is more restrictive
|
|
than necessary... */
|
|
struct dma_desc *tx_ring;
|
|
dma_addr_t tx_ring_dma;
|
|
|
|
tx_ring = kzalloc(size, GFP_KERNEL);
|
|
if (!tx_ring)
|
|
goto out_err;
|
|
|
|
tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring,
|
|
DMA_TABLE_BYTES,
|
|
DMA_TO_DEVICE);
|
|
|
|
if (dma_mapping_error(tx_ring_dma) ||
|
|
tx_ring_dma + size > B44_DMA_MASK) {
|
|
kfree(tx_ring);
|
|
goto out_err;
|
|
}
|
|
|
|
bp->tx_ring = tx_ring;
|
|
bp->tx_ring_dma = tx_ring_dma;
|
|
bp->flags |= B44_FLAG_TX_RING_HACK;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_err:
|
|
b44_free_consistent(bp);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* bp->lock is held. */
|
|
static void b44_clear_stats(struct b44 *bp)
|
|
{
|
|
unsigned long reg;
|
|
|
|
bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
|
|
for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL)
|
|
br32(bp, reg);
|
|
for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL)
|
|
br32(bp, reg);
|
|
}
|
|
|
|
/* bp->lock is held. */
|
|
static void b44_chip_reset(struct b44 *bp)
|
|
{
|
|
if (ssb_is_core_up(bp)) {
|
|
bw32(bp, B44_RCV_LAZY, 0);
|
|
bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
|
|
b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
|
|
bw32(bp, B44_DMATX_CTRL, 0);
|
|
bp->tx_prod = bp->tx_cons = 0;
|
|
if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
|
|
b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE,
|
|
100, 0);
|
|
}
|
|
bw32(bp, B44_DMARX_CTRL, 0);
|
|
bp->rx_prod = bp->rx_cons = 0;
|
|
} else {
|
|
ssb_pci_setup(bp, (bp->core_unit == 0 ?
|
|
SBINTVEC_ENET0 :
|
|
SBINTVEC_ENET1));
|
|
}
|
|
|
|
ssb_core_reset(bp);
|
|
|
|
b44_clear_stats(bp);
|
|
|
|
/* Make PHY accessible. */
|
|
bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
|
|
(0x0d & MDIO_CTRL_MAXF_MASK)));
|
|
br32(bp, B44_MDIO_CTRL);
|
|
|
|
if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
|
|
bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
|
|
br32(bp, B44_ENET_CTRL);
|
|
bp->flags &= ~B44_FLAG_INTERNAL_PHY;
|
|
} else {
|
|
u32 val = br32(bp, B44_DEVCTRL);
|
|
|
|
if (val & DEVCTRL_EPR) {
|
|
bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
|
|
br32(bp, B44_DEVCTRL);
|
|
udelay(100);
|
|
}
|
|
bp->flags |= B44_FLAG_INTERNAL_PHY;
|
|
}
|
|
}
|
|
|
|
/* bp->lock is held. */
|
|
static void b44_halt(struct b44 *bp)
|
|
{
|
|
b44_disable_ints(bp);
|
|
b44_chip_reset(bp);
|
|
}
|
|
|
|
/* bp->lock is held. */
|
|
static void __b44_set_mac_addr(struct b44 *bp)
|
|
{
|
|
bw32(bp, B44_CAM_CTRL, 0);
|
|
if (!(bp->dev->flags & IFF_PROMISC)) {
|
|
u32 val;
|
|
|
|
__b44_cam_write(bp, bp->dev->dev_addr, 0);
|
|
val = br32(bp, B44_CAM_CTRL);
|
|
bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
|
|
}
|
|
}
|
|
|
|
static int b44_set_mac_addr(struct net_device *dev, void *p)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (netif_running(dev))
|
|
return -EBUSY;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EINVAL;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
__b44_set_mac_addr(bp);
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called at device open time to get the chip ready for
|
|
* packet processing. Invoked with bp->lock held.
|
|
*/
|
|
static void __b44_set_rx_mode(struct net_device *);
|
|
static void b44_init_hw(struct b44 *bp)
|
|
{
|
|
u32 val;
|
|
|
|
b44_chip_reset(bp);
|
|
b44_phy_reset(bp);
|
|
b44_setup_phy(bp);
|
|
|
|
/* Enable CRC32, set proper LED modes and power on PHY */
|
|
bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
|
|
bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
|
|
|
|
/* This sets the MAC address too. */
|
|
__b44_set_rx_mode(bp->dev);
|
|
|
|
/* MTU + eth header + possible VLAN tag + struct rx_header */
|
|
bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
|
|
bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
|
|
|
|
bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
|
|
bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
|
|
bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
|
|
bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
|
|
(bp->rx_offset << DMARX_CTRL_ROSHIFT)));
|
|
bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
|
|
|
|
bw32(bp, B44_DMARX_PTR, bp->rx_pending);
|
|
bp->rx_prod = bp->rx_pending;
|
|
|
|
bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
|
|
|
|
val = br32(bp, B44_ENET_CTRL);
|
|
bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
|
|
}
|
|
|
|
static int b44_open(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = b44_alloc_consistent(bp);
|
|
if (err)
|
|
goto out;
|
|
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
|
|
b44_check_phy(bp);
|
|
|
|
err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
|
|
if (unlikely(err < 0)) {
|
|
b44_chip_reset(bp);
|
|
b44_free_rings(bp);
|
|
b44_free_consistent(bp);
|
|
goto out;
|
|
}
|
|
|
|
init_timer(&bp->timer);
|
|
bp->timer.expires = jiffies + HZ;
|
|
bp->timer.data = (unsigned long) bp;
|
|
bp->timer.function = b44_timer;
|
|
add_timer(&bp->timer);
|
|
|
|
b44_enable_ints(bp);
|
|
netif_start_queue(dev);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
#if 0
|
|
/*static*/ void b44_dump_state(struct b44 *bp)
|
|
{
|
|
u32 val32, val32_2, val32_3, val32_4, val32_5;
|
|
u16 val16;
|
|
|
|
pci_read_config_word(bp->pdev, PCI_STATUS, &val16);
|
|
printk("DEBUG: PCI status [%04x] \n", val16);
|
|
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling receive - used by netconsole and other diagnostic tools
|
|
* to allow network i/o with interrupts disabled.
|
|
*/
|
|
static void b44_poll_controller(struct net_device *dev)
|
|
{
|
|
disable_irq(dev->irq);
|
|
b44_interrupt(dev->irq, dev, NULL);
|
|
enable_irq(dev->irq);
|
|
}
|
|
#endif
|
|
|
|
static int b44_close(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
netif_poll_disable(dev);
|
|
|
|
del_timer_sync(&bp->timer);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
#if 0
|
|
b44_dump_state(bp);
|
|
#endif
|
|
b44_halt(bp);
|
|
b44_free_rings(bp);
|
|
netif_carrier_off(dev);
|
|
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
netif_poll_enable(dev);
|
|
|
|
b44_free_consistent(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *b44_get_stats(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
struct net_device_stats *nstat = &bp->stats;
|
|
struct b44_hw_stats *hwstat = &bp->hw_stats;
|
|
|
|
/* Convert HW stats into netdevice stats. */
|
|
nstat->rx_packets = hwstat->rx_pkts;
|
|
nstat->tx_packets = hwstat->tx_pkts;
|
|
nstat->rx_bytes = hwstat->rx_octets;
|
|
nstat->tx_bytes = hwstat->tx_octets;
|
|
nstat->tx_errors = (hwstat->tx_jabber_pkts +
|
|
hwstat->tx_oversize_pkts +
|
|
hwstat->tx_underruns +
|
|
hwstat->tx_excessive_cols +
|
|
hwstat->tx_late_cols);
|
|
nstat->multicast = hwstat->tx_multicast_pkts;
|
|
nstat->collisions = hwstat->tx_total_cols;
|
|
|
|
nstat->rx_length_errors = (hwstat->rx_oversize_pkts +
|
|
hwstat->rx_undersize);
|
|
nstat->rx_over_errors = hwstat->rx_missed_pkts;
|
|
nstat->rx_frame_errors = hwstat->rx_align_errs;
|
|
nstat->rx_crc_errors = hwstat->rx_crc_errs;
|
|
nstat->rx_errors = (hwstat->rx_jabber_pkts +
|
|
hwstat->rx_oversize_pkts +
|
|
hwstat->rx_missed_pkts +
|
|
hwstat->rx_crc_align_errs +
|
|
hwstat->rx_undersize +
|
|
hwstat->rx_crc_errs +
|
|
hwstat->rx_align_errs +
|
|
hwstat->rx_symbol_errs);
|
|
|
|
nstat->tx_aborted_errors = hwstat->tx_underruns;
|
|
#if 0
|
|
/* Carrier lost counter seems to be broken for some devices */
|
|
nstat->tx_carrier_errors = hwstat->tx_carrier_lost;
|
|
#endif
|
|
|
|
return nstat;
|
|
}
|
|
|
|
static int __b44_load_mcast(struct b44 *bp, struct net_device *dev)
|
|
{
|
|
struct dev_mc_list *mclist;
|
|
int i, num_ents;
|
|
|
|
num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE);
|
|
mclist = dev->mc_list;
|
|
for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) {
|
|
__b44_cam_write(bp, mclist->dmi_addr, i + 1);
|
|
}
|
|
return i+1;
|
|
}
|
|
|
|
static void __b44_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
u32 val;
|
|
|
|
val = br32(bp, B44_RXCONFIG);
|
|
val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
|
|
if (dev->flags & IFF_PROMISC) {
|
|
val |= RXCONFIG_PROMISC;
|
|
bw32(bp, B44_RXCONFIG, val);
|
|
} else {
|
|
unsigned char zero[6] = {0, 0, 0, 0, 0, 0};
|
|
int i = 0;
|
|
|
|
__b44_set_mac_addr(bp);
|
|
|
|
if (dev->flags & IFF_ALLMULTI)
|
|
val |= RXCONFIG_ALLMULTI;
|
|
else
|
|
i = __b44_load_mcast(bp, dev);
|
|
|
|
for (; i < 64; i++) {
|
|
__b44_cam_write(bp, zero, i);
|
|
}
|
|
bw32(bp, B44_RXCONFIG, val);
|
|
val = br32(bp, B44_CAM_CTRL);
|
|
bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
|
|
}
|
|
}
|
|
|
|
static void b44_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
__b44_set_rx_mode(dev);
|
|
spin_unlock_irq(&bp->lock);
|
|
}
|
|
|
|
static u32 b44_get_msglevel(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
return bp->msg_enable;
|
|
}
|
|
|
|
static void b44_set_msglevel(struct net_device *dev, u32 value)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
bp->msg_enable = value;
|
|
}
|
|
|
|
static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
struct pci_dev *pci_dev = bp->pdev;
|
|
|
|
strcpy (info->driver, DRV_MODULE_NAME);
|
|
strcpy (info->version, DRV_MODULE_VERSION);
|
|
strcpy (info->bus_info, pci_name(pci_dev));
|
|
}
|
|
|
|
static int b44_nway_reset(struct net_device *dev)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
u32 bmcr;
|
|
int r;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
b44_readphy(bp, MII_BMCR, &bmcr);
|
|
b44_readphy(bp, MII_BMCR, &bmcr);
|
|
r = -EINVAL;
|
|
if (bmcr & BMCR_ANENABLE) {
|
|
b44_writephy(bp, MII_BMCR,
|
|
bmcr | BMCR_ANRESTART);
|
|
r = 0;
|
|
}
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
return r;
|
|
}
|
|
|
|
static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return -EAGAIN;
|
|
cmd->supported = (SUPPORTED_Autoneg);
|
|
cmd->supported |= (SUPPORTED_100baseT_Half |
|
|
SUPPORTED_100baseT_Full |
|
|
SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_MII);
|
|
|
|
cmd->advertising = 0;
|
|
if (bp->flags & B44_FLAG_ADV_10HALF)
|
|
cmd->advertising |= ADVERTISED_10baseT_Half;
|
|
if (bp->flags & B44_FLAG_ADV_10FULL)
|
|
cmd->advertising |= ADVERTISED_10baseT_Full;
|
|
if (bp->flags & B44_FLAG_ADV_100HALF)
|
|
cmd->advertising |= ADVERTISED_100baseT_Half;
|
|
if (bp->flags & B44_FLAG_ADV_100FULL)
|
|
cmd->advertising |= ADVERTISED_100baseT_Full;
|
|
cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
|
|
cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
|
|
SPEED_100 : SPEED_10;
|
|
cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
cmd->port = 0;
|
|
cmd->phy_address = bp->phy_addr;
|
|
cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
|
|
XCVR_INTERNAL : XCVR_EXTERNAL;
|
|
cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
|
|
AUTONEG_DISABLE : AUTONEG_ENABLE;
|
|
cmd->maxtxpkt = 0;
|
|
cmd->maxrxpkt = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return -EAGAIN;
|
|
|
|
/* We do not support gigabit. */
|
|
if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
if (cmd->advertising &
|
|
(ADVERTISED_1000baseT_Half |
|
|
ADVERTISED_1000baseT_Full))
|
|
return -EINVAL;
|
|
} else if ((cmd->speed != SPEED_100 &&
|
|
cmd->speed != SPEED_10) ||
|
|
(cmd->duplex != DUPLEX_HALF &&
|
|
cmd->duplex != DUPLEX_FULL)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
bp->flags &= ~B44_FLAG_FORCE_LINK;
|
|
bp->flags &= ~(B44_FLAG_ADV_10HALF |
|
|
B44_FLAG_ADV_10FULL |
|
|
B44_FLAG_ADV_100HALF |
|
|
B44_FLAG_ADV_100FULL);
|
|
if (cmd->advertising & ADVERTISE_10HALF)
|
|
bp->flags |= B44_FLAG_ADV_10HALF;
|
|
if (cmd->advertising & ADVERTISE_10FULL)
|
|
bp->flags |= B44_FLAG_ADV_10FULL;
|
|
if (cmd->advertising & ADVERTISE_100HALF)
|
|
bp->flags |= B44_FLAG_ADV_100HALF;
|
|
if (cmd->advertising & ADVERTISE_100FULL)
|
|
bp->flags |= B44_FLAG_ADV_100FULL;
|
|
} else {
|
|
bp->flags |= B44_FLAG_FORCE_LINK;
|
|
if (cmd->speed == SPEED_100)
|
|
bp->flags |= B44_FLAG_100_BASE_T;
|
|
if (cmd->duplex == DUPLEX_FULL)
|
|
bp->flags |= B44_FLAG_FULL_DUPLEX;
|
|
}
|
|
|
|
b44_setup_phy(bp);
|
|
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void b44_get_ringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
ering->rx_max_pending = B44_RX_RING_SIZE - 1;
|
|
ering->rx_pending = bp->rx_pending;
|
|
|
|
/* XXX ethtool lacks a tx_max_pending, oops... */
|
|
}
|
|
|
|
static int b44_set_ringparam(struct net_device *dev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
if ((ering->rx_pending > B44_RX_RING_SIZE - 1) ||
|
|
(ering->rx_mini_pending != 0) ||
|
|
(ering->rx_jumbo_pending != 0) ||
|
|
(ering->tx_pending > B44_TX_RING_SIZE - 1))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
bp->rx_pending = ering->rx_pending;
|
|
bp->tx_pending = ering->tx_pending;
|
|
|
|
b44_halt(bp);
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
netif_wake_queue(bp->dev);
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
b44_enable_ints(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void b44_get_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
epause->autoneg =
|
|
(bp->flags & B44_FLAG_PAUSE_AUTO) != 0;
|
|
epause->rx_pause =
|
|
(bp->flags & B44_FLAG_RX_PAUSE) != 0;
|
|
epause->tx_pause =
|
|
(bp->flags & B44_FLAG_TX_PAUSE) != 0;
|
|
}
|
|
|
|
static int b44_set_pauseparam(struct net_device *dev,
|
|
struct ethtool_pauseparam *epause)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
if (epause->autoneg)
|
|
bp->flags |= B44_FLAG_PAUSE_AUTO;
|
|
else
|
|
bp->flags &= ~B44_FLAG_PAUSE_AUTO;
|
|
if (epause->rx_pause)
|
|
bp->flags |= B44_FLAG_RX_PAUSE;
|
|
else
|
|
bp->flags &= ~B44_FLAG_RX_PAUSE;
|
|
if (epause->tx_pause)
|
|
bp->flags |= B44_FLAG_TX_PAUSE;
|
|
else
|
|
bp->flags &= ~B44_FLAG_TX_PAUSE;
|
|
if (bp->flags & B44_FLAG_PAUSE_AUTO) {
|
|
b44_halt(bp);
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
} else {
|
|
__b44_set_flow_ctrl(bp, bp->flags);
|
|
}
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
b44_enable_ints(bp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void b44_get_strings(struct net_device *dev, u32 stringset, u8 *data)
|
|
{
|
|
switch(stringset) {
|
|
case ETH_SS_STATS:
|
|
memcpy(data, *b44_gstrings, sizeof(b44_gstrings));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int b44_get_stats_count(struct net_device *dev)
|
|
{
|
|
return ARRAY_SIZE(b44_gstrings);
|
|
}
|
|
|
|
static void b44_get_ethtool_stats(struct net_device *dev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
u32 *val = &bp->hw_stats.tx_good_octets;
|
|
u32 i;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
b44_stats_update(bp);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(b44_gstrings); i++)
|
|
*data++ = *val++;
|
|
|
|
spin_unlock_irq(&bp->lock);
|
|
}
|
|
|
|
static struct ethtool_ops b44_ethtool_ops = {
|
|
.get_drvinfo = b44_get_drvinfo,
|
|
.get_settings = b44_get_settings,
|
|
.set_settings = b44_set_settings,
|
|
.nway_reset = b44_nway_reset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_ringparam = b44_get_ringparam,
|
|
.set_ringparam = b44_set_ringparam,
|
|
.get_pauseparam = b44_get_pauseparam,
|
|
.set_pauseparam = b44_set_pauseparam,
|
|
.get_msglevel = b44_get_msglevel,
|
|
.set_msglevel = b44_set_msglevel,
|
|
.get_strings = b44_get_strings,
|
|
.get_stats_count = b44_get_stats_count,
|
|
.get_ethtool_stats = b44_get_ethtool_stats,
|
|
.get_perm_addr = ethtool_op_get_perm_addr,
|
|
};
|
|
|
|
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
struct b44 *bp = netdev_priv(dev);
|
|
int err = -EINVAL;
|
|
|
|
if (!netif_running(dev))
|
|
goto out;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
|
|
spin_unlock_irq(&bp->lock);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
/* Read 128-bytes of EEPROM. */
|
|
static int b44_read_eeprom(struct b44 *bp, u8 *data)
|
|
{
|
|
long i;
|
|
u16 *ptr = (u16 *) data;
|
|
|
|
for (i = 0; i < 128; i += 2)
|
|
ptr[i / 2] = readw(bp->regs + 4096 + i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit b44_get_invariants(struct b44 *bp)
|
|
{
|
|
u8 eeprom[128];
|
|
int err;
|
|
|
|
err = b44_read_eeprom(bp, &eeprom[0]);
|
|
if (err)
|
|
goto out;
|
|
|
|
bp->dev->dev_addr[0] = eeprom[79];
|
|
bp->dev->dev_addr[1] = eeprom[78];
|
|
bp->dev->dev_addr[2] = eeprom[81];
|
|
bp->dev->dev_addr[3] = eeprom[80];
|
|
bp->dev->dev_addr[4] = eeprom[83];
|
|
bp->dev->dev_addr[5] = eeprom[82];
|
|
|
|
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
|
|
printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len);
|
|
|
|
bp->phy_addr = eeprom[90] & 0x1f;
|
|
|
|
/* With this, plus the rx_header prepended to the data by the
|
|
* hardware, we'll land the ethernet header on a 2-byte boundary.
|
|
*/
|
|
bp->rx_offset = 30;
|
|
|
|
bp->imask = IMASK_DEF;
|
|
|
|
bp->core_unit = ssb_core_unit(bp);
|
|
bp->dma_offset = SB_PCI_DMA;
|
|
|
|
/* XXX - really required?
|
|
bp->flags |= B44_FLAG_BUGGY_TXPTR;
|
|
*/
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int __devinit b44_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int b44_version_printed = 0;
|
|
unsigned long b44reg_base, b44reg_len;
|
|
struct net_device *dev;
|
|
struct b44 *bp;
|
|
int err, i;
|
|
|
|
if (b44_version_printed++ == 0)
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot enable PCI device, "
|
|
"aborting.\n");
|
|
return err;
|
|
}
|
|
|
|
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
|
|
printk(KERN_ERR PFX "Cannot find proper PCI device "
|
|
"base address, aborting.\n");
|
|
err = -ENODEV;
|
|
goto err_out_disable_pdev;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRV_MODULE_NAME);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot obtain PCI resources, "
|
|
"aborting.\n");
|
|
goto err_out_disable_pdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "No usable DMA configuration, "
|
|
"aborting.\n");
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "No usable DMA configuration, "
|
|
"aborting.\n");
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
b44reg_base = pci_resource_start(pdev, 0);
|
|
b44reg_len = pci_resource_len(pdev, 0);
|
|
|
|
dev = alloc_etherdev(sizeof(*bp));
|
|
if (!dev) {
|
|
printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev,&pdev->dev);
|
|
|
|
/* No interesting netdevice features in this card... */
|
|
dev->features |= 0;
|
|
|
|
bp = netdev_priv(dev);
|
|
bp->pdev = pdev;
|
|
bp->dev = dev;
|
|
|
|
bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE);
|
|
|
|
spin_lock_init(&bp->lock);
|
|
|
|
bp->regs = ioremap(b44reg_base, b44reg_len);
|
|
if (bp->regs == 0UL) {
|
|
printk(KERN_ERR PFX "Cannot map device registers, "
|
|
"aborting.\n");
|
|
err = -ENOMEM;
|
|
goto err_out_free_dev;
|
|
}
|
|
|
|
bp->rx_pending = B44_DEF_RX_RING_PENDING;
|
|
bp->tx_pending = B44_DEF_TX_RING_PENDING;
|
|
|
|
dev->open = b44_open;
|
|
dev->stop = b44_close;
|
|
dev->hard_start_xmit = b44_start_xmit;
|
|
dev->get_stats = b44_get_stats;
|
|
dev->set_multicast_list = b44_set_rx_mode;
|
|
dev->set_mac_address = b44_set_mac_addr;
|
|
dev->do_ioctl = b44_ioctl;
|
|
dev->tx_timeout = b44_tx_timeout;
|
|
dev->poll = b44_poll;
|
|
dev->weight = 64;
|
|
dev->watchdog_timeo = B44_TX_TIMEOUT;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = b44_poll_controller;
|
|
#endif
|
|
dev->change_mtu = b44_change_mtu;
|
|
dev->irq = pdev->irq;
|
|
SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
|
|
|
|
netif_carrier_off(dev);
|
|
|
|
err = b44_get_invariants(bp);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Problem fetching invariants of chip, "
|
|
"aborting.\n");
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
bp->mii_if.dev = dev;
|
|
bp->mii_if.mdio_read = b44_mii_read;
|
|
bp->mii_if.mdio_write = b44_mii_write;
|
|
bp->mii_if.phy_id = bp->phy_addr;
|
|
bp->mii_if.phy_id_mask = 0x1f;
|
|
bp->mii_if.reg_num_mask = 0x1f;
|
|
|
|
/* By default, advertise all speed/duplex settings. */
|
|
bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL |
|
|
B44_FLAG_ADV_100HALF | B44_FLAG_ADV_100FULL);
|
|
|
|
/* By default, auto-negotiate PAUSE. */
|
|
bp->flags |= B44_FLAG_PAUSE_AUTO;
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot register net device, "
|
|
"aborting.\n");
|
|
goto err_out_iounmap;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
pci_save_state(bp->pdev);
|
|
|
|
/* Chip reset provides power to the b44 MAC & PCI cores, which
|
|
* is necessary for MAC register access.
|
|
*/
|
|
b44_chip_reset(bp);
|
|
|
|
printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
|
|
for (i = 0; i < 6; i++)
|
|
printk("%2.2x%c", dev->dev_addr[i],
|
|
i == 5 ? '\n' : ':');
|
|
|
|
return 0;
|
|
|
|
err_out_iounmap:
|
|
iounmap(bp->regs);
|
|
|
|
err_out_free_dev:
|
|
free_netdev(dev);
|
|
|
|
err_out_free_res:
|
|
pci_release_regions(pdev);
|
|
|
|
err_out_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit b44_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
iounmap(bp->regs);
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
static int b44_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
del_timer_sync(&bp->timer);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
b44_halt(bp);
|
|
netif_carrier_off(bp->dev);
|
|
netif_device_detach(bp->dev);
|
|
b44_free_rings(bp);
|
|
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
free_irq(dev->irq, dev);
|
|
pci_disable_device(pdev);
|
|
return 0;
|
|
}
|
|
|
|
static int b44_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
pci_restore_state(pdev);
|
|
pci_enable_device(pdev);
|
|
pci_set_master(pdev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
if (request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev))
|
|
printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
b44_init_rings(bp);
|
|
b44_init_hw(bp);
|
|
netif_device_attach(bp->dev);
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
bp->timer.expires = jiffies + HZ;
|
|
add_timer(&bp->timer);
|
|
|
|
b44_enable_ints(bp);
|
|
netif_wake_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_driver b44_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = b44_pci_tbl,
|
|
.probe = b44_init_one,
|
|
.remove = __devexit_p(b44_remove_one),
|
|
.suspend = b44_suspend,
|
|
.resume = b44_resume,
|
|
};
|
|
|
|
static int __init b44_init(void)
|
|
{
|
|
unsigned int dma_desc_align_size = dma_get_cache_alignment();
|
|
|
|
/* Setup paramaters for syncing RX/TX DMA descriptors */
|
|
dma_desc_align_mask = ~(dma_desc_align_size - 1);
|
|
dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc));
|
|
|
|
return pci_module_init(&b44_driver);
|
|
}
|
|
|
|
static void __exit b44_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&b44_driver);
|
|
}
|
|
|
|
module_init(b44_init);
|
|
module_exit(b44_cleanup);
|
|
|