linux/drivers/net/ethernet/intel/ixgbe
Alexander Duyck 8f4fbb9bfc ixgbe: Make TSO check for CHECKSUM_PARTIAL to avoid skb_is_gso check
This change is meant to reduce the overhead for workloads that are not
using either TSO or checksum offloads.  Most of the time the compiler
should jump ahead after failing this check to the VLAN check since in the
ixgbe_tx_csum call we start with that check as well.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-19 03:45:56 -08:00
..
ixgbe_82598.c ixgbe: Update link flow control to correctly handle multiple packet buffer DCB 2012-05-04 03:25:24 -07:00
ixgbe_82599.c ixgbe: Use is_valid_ether_addr 2012-12-06 21:31:06 -08:00
ixgbe_common.c ixgbe: Use is_valid_ether_addr 2012-12-06 21:31:06 -08:00
ixgbe_common.h ixgbe: Use is_valid_ether_addr 2012-12-06 21:31:06 -08:00
ixgbe_dcb_82598.c ixgbe: Clean up priority based flow control 2012-05-09 22:15:40 -07:00
ixgbe_dcb_82598.h ixgbe: update copyright to 2012 2012-02-03 03:05:30 -08:00
ixgbe_dcb_82599.c ixgbe: Clean up priority based flow control 2012-05-09 22:15:40 -07:00
ixgbe_dcb_82599.h ixgbe: update copyright to 2012 2012-02-03 03:05:30 -08:00
ixgbe_dcb_nl.c ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes 2013-01-19 03:35:15 -08:00
ixgbe_dcb.c ixgbe: Use num_tcs.pg_tcs as upper limit for TC when checking based on UP 2012-07-21 16:05:28 -07:00
ixgbe_dcb.h ixgbe: Populate the prio_tc_map in ixgbe_setup_tc 2012-07-14 14:29:19 -07:00
ixgbe_debugfs.c ixgbe: eliminate Smatch warnings in ixgbe_debugfs.c 2012-12-01 02:29:19 -08:00
ixgbe_ethtool.c ixgbe: ethtool correctly identify autoneg setting 2012-11-22 01:39:43 -08:00
ixgbe_fcoe.c ixgbe: Enable jumbo frames support w/ SR-IOV 2012-10-19 04:04:14 -07:00
ixgbe_fcoe.h ixgbe: Make FCoE allocation and configuration closer to how rings work 2012-07-19 18:18:49 -07:00
ixgbe_lib.c ixgbe: fix default setting of TXDCTL.WTHRESH 2012-11-01 02:00:10 -07:00
ixgbe_main.c ixgbe: Make TSO check for CHECKSUM_PARTIAL to avoid skb_is_gso check 2013-01-19 03:45:56 -08:00
ixgbe_mbx.c ixgbe: update copyright to 2012 2012-02-03 03:05:30 -08:00
ixgbe_mbx.h ixgbe: Add support for GET_QUEUES message to get DCB configuration 2012-10-22 21:14:54 -07:00
ixgbe_phy.c ixgbe: add support for 1G SX modules 2012-06-20 01:37:04 -07:00
ixgbe_phy.h ixgbe: update copyright to 2012 2012-02-03 03:05:30 -08:00
ixgbe_ptp.c ixgbe: remove needless queuing for L4 ptp packets 2012-11-22 01:39:37 -08:00
ixgbe_sriov.c ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes 2013-01-19 03:35:15 -08:00
ixgbe_sriov.h ixgbe: SR-IOV: dynamic IEEE DCBx default priority changes 2013-01-19 03:35:15 -08:00
ixgbe_sysfs.c drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions 2012-07-10 23:13:46 -07:00
ixgbe_type.h ixgbe: check whether thermal sensor is enabled. 2012-12-06 21:38:38 -08:00
ixgbe_x540.c ixgbe: Use is_valid_ether_addr 2012-12-06 21:31:06 -08:00
ixgbe.h ixgbe: Make the bridge mode setting sticky 2012-11-28 04:46:11 -08:00
Makefile ptp: Enable clock drivers along with associated net/PHY drivers 2012-11-01 11:35:18 -04:00