forked from Minki/linux
8ecbabd977
Initial version of TWL6040 codec driver. The TWL6040 codec uses a proprietary PDM-based digital audio interface. Audio paths supported are: - Input: Main Mic, Sub Mic, Headset Mic, Auxiliary-FM Left/Right - Output: Headset Left/Right, Handsfree Left/Right TWL6040 codec supports power-up/down manual and automatic sequence. Manual sequence is done through a specific register writes sequence. Automatic sequence is done when the codec is powered-up through the external AUDPWRON line. The completion of the sequence is signaled through the audio interrupt. TWL6040 codec sysclk can be provided by: low-power or high performance PLL: - The low-power PLL takes a low-frequency input at 32,768 Hz and generates an approximate of 17.64 or 19.2 MHz (for 44.1 KHz and 48 KHz respectively) - The high-performance PLL generates an exact 19.2 MHz clock signal from high-frequency input at 12/19.2/26/38.4 MHz. Low-power playback mode is a special scenario where only headset path (headset DAC and driver) is active. For the particular case of headset path, PLL being used defines the headset power mode: low-power, high-performance. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com> Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
280 lines
5.5 KiB
Plaintext
280 lines
5.5 KiB
Plaintext
# Helper to resolve issues with configs that have SPI enabled but I2C
|
|
# modular, meaning we can't build the codec driver in with I2C support.
|
|
# We use an ordered list of conditional defaults to pick the appropriate
|
|
# setting - SPI can't be modular so that case doesn't need to be covered.
|
|
config SND_SOC_I2C_AND_SPI
|
|
tristate
|
|
default m if I2C=m
|
|
default y if I2C=y
|
|
default y if SPI_MASTER=y
|
|
|
|
config SND_SOC_ALL_CODECS
|
|
tristate "Build all ASoC CODEC drivers"
|
|
select SND_SOC_L3
|
|
select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
|
|
select SND_SOC_AD1836 if SPI_MASTER
|
|
select SND_SOC_AD1938 if SPI_MASTER
|
|
select SND_SOC_AD1980 if SND_SOC_AC97_BUS
|
|
select SND_SOC_ADS117X
|
|
select SND_SOC_AD73311 if I2C
|
|
select SND_SOC_AK4104 if SPI_MASTER
|
|
select SND_SOC_AK4535 if I2C
|
|
select SND_SOC_AK4642 if I2C
|
|
select SND_SOC_AK4671 if I2C
|
|
select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC
|
|
select SND_SOC_CS4270 if I2C
|
|
select SND_SOC_MAX9877 if I2C
|
|
select SND_SOC_DA7210 if I2C
|
|
select SND_SOC_PCM3008
|
|
select SND_SOC_SPDIF
|
|
select SND_SOC_SSM2602 if I2C
|
|
select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
|
|
select SND_SOC_TLV320AIC23 if I2C
|
|
select SND_SOC_TLV320AIC26 if SPI_MASTER
|
|
select SND_SOC_TLV320AIC3X if I2C
|
|
select SND_SOC_TPA6130A2 if I2C
|
|
select SND_SOC_TLV320DAC33 if I2C
|
|
select SND_SOC_TWL4030 if TWL4030_CORE
|
|
select SND_SOC_TWL6040 if TWL4030_CORE
|
|
select SND_SOC_UDA134X
|
|
select SND_SOC_UDA1380 if I2C
|
|
select SND_SOC_WM2000 if I2C
|
|
select SND_SOC_WM8350 if MFD_WM8350
|
|
select SND_SOC_WM8400 if MFD_WM8400
|
|
select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8523 if I2C
|
|
select SND_SOC_WM8580 if I2C
|
|
select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8727
|
|
select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8900 if I2C
|
|
select SND_SOC_WM8903 if I2C
|
|
select SND_SOC_WM8904 if I2C
|
|
select SND_SOC_WM8940 if I2C
|
|
select SND_SOC_WM8955 if I2C
|
|
select SND_SOC_WM8960 if I2C
|
|
select SND_SOC_WM8961 if I2C
|
|
select SND_SOC_WM8971 if I2C
|
|
select SND_SOC_WM8974 if I2C
|
|
select SND_SOC_WM8978 if I2C
|
|
select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI
|
|
select SND_SOC_WM8990 if I2C
|
|
select SND_SOC_WM8993 if I2C
|
|
select SND_SOC_WM8994 if MFD_WM8994
|
|
select SND_SOC_WM9081 if I2C
|
|
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
|
|
select SND_SOC_WM9712 if SND_SOC_AC97_BUS
|
|
select SND_SOC_WM9713 if SND_SOC_AC97_BUS
|
|
help
|
|
Normally ASoC codec drivers are only built if a machine driver which
|
|
uses them is also built since they are only usable with a machine
|
|
driver. Selecting this option will allow these drivers to be built
|
|
without an explicit machine driver for test and development purposes.
|
|
|
|
Support for the bus types used to access the codecs to be built must
|
|
be selected separately.
|
|
|
|
If unsure select "N".
|
|
|
|
config SND_SOC_WM_HUBS
|
|
tristate
|
|
default y if SND_SOC_WM8993=y
|
|
default m if SND_SOC_WM8993=m
|
|
|
|
config SND_SOC_AC97_CODEC
|
|
tristate
|
|
select SND_AC97_CODEC
|
|
|
|
config SND_SOC_AD1836
|
|
tristate
|
|
|
|
config SND_SOC_AD1938
|
|
tristate
|
|
|
|
config SND_SOC_AD1980
|
|
tristate
|
|
|
|
config SND_SOC_AD73311
|
|
tristate
|
|
|
|
config SND_SOC_ADS117X
|
|
tristate
|
|
|
|
config SND_SOC_AK4104
|
|
tristate
|
|
|
|
config SND_SOC_AK4535
|
|
tristate
|
|
|
|
config SND_SOC_AK4642
|
|
tristate
|
|
|
|
config SND_SOC_AK4671
|
|
tristate
|
|
|
|
config SND_SOC_CQ0093VC
|
|
tristate
|
|
|
|
# Cirrus Logic CS4270 Codec
|
|
config SND_SOC_CS4270
|
|
tristate
|
|
|
|
config SND_SOC_DA7210
|
|
tristate
|
|
|
|
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
|
|
# Select if you are affected by the errata where the part will not function
|
|
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
|
|
# not select any sample rates that require MCLK to be divided by 1.5.
|
|
config SND_SOC_CS4270_VD33_ERRATA
|
|
bool
|
|
depends on SND_SOC_CS4270
|
|
|
|
config SND_SOC_CX20442
|
|
tristate
|
|
|
|
config SND_SOC_L3
|
|
tristate
|
|
|
|
config SND_SOC_PCM3008
|
|
tristate
|
|
|
|
config SND_SOC_SPDIF
|
|
tristate
|
|
|
|
config SND_SOC_SSM2602
|
|
tristate
|
|
|
|
config SND_SOC_STAC9766
|
|
tristate
|
|
|
|
config SND_SOC_TLV320AIC23
|
|
tristate
|
|
|
|
config SND_SOC_TLV320AIC26
|
|
tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
|
|
depends on SPI
|
|
|
|
config SND_SOC_TLV320AIC3X
|
|
tristate
|
|
|
|
config SND_SOC_TLV320DAC33
|
|
tristate
|
|
|
|
config SND_SOC_TWL4030
|
|
select TWL4030_CODEC
|
|
tristate
|
|
|
|
config SND_SOC_TWL6040
|
|
tristate
|
|
|
|
config SND_SOC_UDA134X
|
|
tristate
|
|
|
|
config SND_SOC_UDA1380
|
|
tristate
|
|
|
|
config SND_SOC_WM8350
|
|
tristate
|
|
|
|
config SND_SOC_WM8400
|
|
tristate
|
|
|
|
config SND_SOC_WM8510
|
|
tristate
|
|
|
|
config SND_SOC_WM8523
|
|
tristate
|
|
|
|
config SND_SOC_WM8580
|
|
tristate
|
|
|
|
config SND_SOC_WM8711
|
|
tristate
|
|
|
|
config SND_SOC_WM8727
|
|
tristate
|
|
|
|
config SND_SOC_WM8728
|
|
tristate
|
|
|
|
config SND_SOC_WM8731
|
|
tristate
|
|
|
|
config SND_SOC_WM8750
|
|
tristate
|
|
|
|
config SND_SOC_WM8753
|
|
tristate
|
|
|
|
config SND_SOC_WM8776
|
|
tristate
|
|
|
|
config SND_SOC_WM8900
|
|
tristate
|
|
|
|
config SND_SOC_WM8903
|
|
tristate
|
|
|
|
config SND_SOC_WM8904
|
|
tristate
|
|
|
|
config SND_SOC_WM8940
|
|
tristate
|
|
|
|
config SND_SOC_WM8955
|
|
tristate
|
|
|
|
config SND_SOC_WM8960
|
|
tristate
|
|
|
|
config SND_SOC_WM8961
|
|
tristate
|
|
|
|
config SND_SOC_WM8971
|
|
tristate
|
|
|
|
config SND_SOC_WM8974
|
|
tristate
|
|
|
|
config SND_SOC_WM8978
|
|
tristate
|
|
|
|
config SND_SOC_WM8988
|
|
tristate
|
|
|
|
config SND_SOC_WM8990
|
|
tristate
|
|
|
|
config SND_SOC_WM8993
|
|
tristate
|
|
|
|
config SND_SOC_WM8994
|
|
tristate
|
|
|
|
config SND_SOC_WM9081
|
|
tristate
|
|
|
|
config SND_SOC_WM9705
|
|
tristate
|
|
|
|
config SND_SOC_WM9712
|
|
tristate
|
|
|
|
config SND_SOC_WM9713
|
|
tristate
|
|
|
|
# Amp
|
|
config SND_SOC_MAX9877
|
|
tristate
|
|
|
|
config SND_SOC_TPA6130A2
|
|
tristate
|
|
|
|
config SND_SOC_WM2000
|
|
tristate
|