leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8d48817df6
linux/net/mac80211/status.c
Jonas Jelonek 44fa75f207 mac80211: extend current rate control tx status API 
This patch adds the new struct ieee80211_rate_status and replaces
'struct rate_info *rate' in ieee80211_tx_status with pointer and length
annotation.

The struct ieee80211_rate_status allows to:
(1)	receive tx power status feedback for transmit power control (TPC)
	per packet or packet retry
(2)	dynamic mapping of wifi chip specific multi-rate retry (mrr)
	chains with different lengths
(3)	increase the limit of annotatable rate indices to support
	IEEE802.11ac rate sets and beyond

ieee80211_tx_info, control and status buffer, and ieee80211_tx_rate
cannot be used to achieve these goals due to fixed size limitations.

Our new struct contains a struct rate_info to annotate the rate that was
used, retry count of the rate and tx power. It is intended for all
information related to RC and TPC that needs to be passed from driver to
mac80211 and its RC/TPC algorithms like Minstrel_HT. It corresponds to
one stage in an mrr. Multiple subsequent instances of this struct can be
included in struct ieee80211_tx_status via a pointer and a length variable.
Those instances can be allocated on-stack. The former reference to a single
instance of struct rate_info is replaced with our new annotation.

An extension is introduced to struct ieee80211_hw. There are two new
members called 'tx_power_levels' and 'max_txpwr_levels_idx' acting as a
tx power level table. When a wifi device is registered, the driver shall
supply all supported power levels in this list. This allows to support
several quirks like differing power steps in power level ranges or
alike. TPC can use this for algorithm and thus be designed more abstract
instead of handling all possible step widths individually.

Further mandatory changes in status.c, mt76 and ath11k drivers due to the
removal of 'struct rate_info *rate' are also included.
status.c already uses the information in ieee80211_tx_status->rate in
radiotap, this is now changed to use ieee80211_rate_status->rate_idx.
mt76 driver already uses struct rate_info to pass the tx rate to status
path. The new members of the ieee80211_tx_status are set to NULL and 0
because the previously passed rate is not relevant to rate control and
accurate information is passed via tx_info->status.rates.
For ath11k, the txrate can be passed via this struct because ath11k uses
firmware RC and thus the information does not interfere with software RC.

Compile-Tested: current wireless-next tree with all flags on
Tested-on: Xiaomi 4A Gigabit (MediaTek MT7603E, MT7612E) with OpenWrt
		Linux 5.10.113

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://lore.kernel.org/r/20220509173958.1398201-2-jelonek.jonas@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-16 10:05:02 +02:00

1305 lines
38 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2008-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2021-2022 Intel Corporation
*/
#include <linux/export.h>
#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include "ieee80211_i.h"
#include "rate.h"
#include "mesh.h"
#include "led.h"
#include "wme.h"
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
int tmp;
skb->pkt_type = IEEE80211_TX_STATUS_MSG;
skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
&local->skb_queue : &local->skb_queue_unreliable, skb);
tmp = skb_queue_len(&local->skb_queue) +
skb_queue_len(&local->skb_queue_unreliable);
while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
ieee80211_free_txskb(hw, skb);
tmp--;
I802_DEBUG_INC(local->tx_status_drop);
}
tasklet_schedule(&local->tasklet);
}
EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
struct sta_info *sta,
struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
int ac;
if (info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER |
IEEE80211_TX_CTL_AMPDU |
IEEE80211_TX_CTL_HW_80211_ENCAP)) {
ieee80211_free_txskb(&local->hw, skb);
return;
}
/*
* This skb 'survived' a round-trip through the driver, and
* hopefully the driver didn't mangle it too badly. However,
* we can definitely not rely on the control information
* being correct. Clear it so we don't get junk there, and
* indicate that it needs new processing, but must not be
* modified/encrypted again.
*/
memset(&info->control, 0, sizeof(info->control));
info->control.jiffies = jiffies;
info->control.vif = &sta->sdata->vif;
info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING;
info->flags |= IEEE80211_TX_INTFL_RETRANSMISSION;
info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS;
sta->deflink.status_stats.filtered++;
/*
* Clear more-data bit on filtered frames, it might be set
* but later frames might time out so it might have to be
* clear again ... It's all rather unlikely (this frame
* should time out first, right?) but let's not confuse
* peers unnecessarily.
*/
if (hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_MOREDATA))
hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_MOREDATA);
if (ieee80211_is_data_qos(hdr->frame_control)) {
u8 *p = ieee80211_get_qos_ctl(hdr);
int tid = *p & IEEE80211_QOS_CTL_TID_MASK;
/*
* Clear EOSP if set, this could happen e.g.
* if an absence period (us being a P2P GO)
* shortens the SP.
*/
if (*p & IEEE80211_QOS_CTL_EOSP)
*p &= ~IEEE80211_QOS_CTL_EOSP;
ac = ieee80211_ac_from_tid(tid);
} else {
ac = IEEE80211_AC_BE;
}
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
* when it wakes up for the next time.
*/
set_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT);
ieee80211_clear_fast_xmit(sta);
/*
* This code races in the following way:
*
* (1) STA sends frame indicating it will go to sleep and does so
* (2) hardware/firmware adds STA to filter list, passes frame up
* (3) hardware/firmware processes TX fifo and suppresses a frame
* (4) we get TX status before having processed the frame and
* knowing that the STA has gone to sleep.
*
* This is actually quite unlikely even when both those events are
* processed from interrupts coming in quickly after one another or
* even at the same time because we queue both TX status events and
* RX frames to be processed by a tasklet and process them in the
* same order that they were received or TX status last. Hence, there
* is no race as long as the frame RX is processed before the next TX
* status, which drivers can ensure, see below.
*
* Note that this can only happen if the hardware or firmware can
* actually add STAs to the filter list, if this is done by the
* driver in response to set_tim() (which will only reduce the race
* this whole filtering tries to solve, not completely solve it)
* this situation cannot happen.
*
* To completely solve this race drivers need to make sure that they
* (a) don't mix the irq-safe/not irq-safe TX status/RX processing
* functions and
* (b) always process RX events before TX status events if ordering
* can be unknown, for example with different interrupt status
* bits.
* (c) if PS mode transitions are manual (i.e. the flag
* %IEEE80211_HW_AP_LINK_PS is set), always process PS state
* changes before calling TX status events if ordering can be
* unknown.
*/
if (test_sta_flag(sta, WLAN_STA_PS_STA) &&
skb_queue_len(&sta->tx_filtered[ac]) < STA_MAX_TX_BUFFER) {
skb_queue_tail(&sta->tx_filtered[ac], skb);
sta_info_recalc_tim(sta);
if (!timer_pending(&local->sta_cleanup))
mod_timer(&local->sta_cleanup,
round_jiffies(jiffies +
STA_INFO_CLEANUP_INTERVAL));
return;
}
if (!test_sta_flag(sta, WLAN_STA_PS_STA) &&
!(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
/* Software retry the packet once */
info->flags |= IEEE80211_TX_INTFL_RETRIED;
ieee80211_add_pending_skb(local, skb);
return;
}
ps_dbg_ratelimited(sta->sdata,
"dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
skb_queue_len(&sta->tx_filtered[ac]),
!!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
ieee80211_free_txskb(&local->hw, skb);
}
static void ieee80211_check_pending_bar(struct sta_info *sta, u8 *addr, u8 tid)
{
struct tid_ampdu_tx *tid_tx;
tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
if (!tid_tx || !tid_tx->bar_pending)
return;
tid_tx->bar_pending = false;
ieee80211_send_bar(&sta->sdata->vif, addr, tid, tid_tx->failed_bar_ssn);
}
static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
{
struct ieee80211_mgmt *mgmt = (void *) skb->data;
struct ieee80211_local *local = sta->local;
struct ieee80211_sub_if_data *sdata = sta->sdata;
if (ieee80211_is_data_qos(mgmt->frame_control)) {
struct ieee80211_hdr *hdr = (void *) skb->data;
u8 *qc = ieee80211_get_qos_ctl(hdr);
u16 tid = qc[0] & 0xf;
ieee80211_check_pending_bar(sta, hdr->addr1, tid);
}
if (ieee80211_is_action(mgmt->frame_control) &&
!ieee80211_has_protected(mgmt->frame_control) &&
mgmt->u.action.category == WLAN_CATEGORY_HT &&
mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS &&
ieee80211_sdata_running(sdata)) {
enum ieee80211_smps_mode smps_mode;
switch (mgmt->u.action.u.ht_smps.smps_control) {
case WLAN_HT_SMPS_CONTROL_DYNAMIC:
smps_mode = IEEE80211_SMPS_DYNAMIC;
break;
case WLAN_HT_SMPS_CONTROL_STATIC:
smps_mode = IEEE80211_SMPS_STATIC;
break;
case WLAN_HT_SMPS_CONTROL_DISABLED:
default: /* shouldn't happen since we don't send that */
smps_mode = IEEE80211_SMPS_OFF;
break;
}
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
/*
* This update looks racy, but isn't -- if we come
* here we've definitely got a station that we're
* talking to, and on a managed interface that can
* only be the AP. And the only other place updating
* this variable in managed mode is before association.
*/
sdata->smps_mode = smps_mode;
ieee80211_queue_work(&local->hw, &sdata->recalc_smps);
} else if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
sta->known_smps_mode = smps_mode;
}
}
}
static void ieee80211_set_bar_pending(struct sta_info *sta, u8 tid, u16 ssn)
{
struct tid_ampdu_tx *tid_tx;
tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
if (!tid_tx)
return;
tid_tx->failed_bar_ssn = ssn;
tid_tx->bar_pending = true;
}
static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info,
struct ieee80211_tx_status *status)
{
struct ieee80211_rate_status *status_rate = NULL;
int len = sizeof(struct ieee80211_radiotap_header);
if (status && status->n_rates)
status_rate = &status->rates[status->n_rates - 1];
/* IEEE80211_RADIOTAP_RATE rate */
if (status_rate && !(status_rate->rate_idx.flags &
(RATE_INFO_FLAGS_MCS |
RATE_INFO_FLAGS_DMG |
RATE_INFO_FLAGS_EDMG |
RATE_INFO_FLAGS_VHT_MCS |
RATE_INFO_FLAGS_HE_MCS)))
len += 2;
else if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags &
(IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS)))
len += 2;
/* IEEE80211_RADIOTAP_TX_FLAGS */
len += 2;
/* IEEE80211_RADIOTAP_DATA_RETRIES */
len += 1;
/* IEEE80211_RADIOTAP_MCS
* IEEE80211_RADIOTAP_VHT */
if (status_rate) {
if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_MCS)
len += 3;
else if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_VHT_MCS)
len = ALIGN(len, 2) + 12;
else if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_HE_MCS)
len = ALIGN(len, 2) + 12;
} else if (info->status.rates[0].idx >= 0) {
if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS)
len += 3;
else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS)
len = ALIGN(len, 2) + 12;
}
return len;
}
static void
ieee80211_add_tx_radiotap_header(struct ieee80211_local *local,
struct ieee80211_supported_band *sband,
struct sk_buff *skb, int retry_count,
int rtap_len, int shift,
struct ieee80211_tx_status *status)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_radiotap_header *rthdr;
struct ieee80211_rate_status *status_rate = NULL;
unsigned char *pos;
u16 legacy_rate = 0;
u16 txflags;
if (status && status->n_rates)
status_rate = &status->rates[status->n_rates - 1];
rthdr = skb_push(skb, rtap_len);
memset(rthdr, 0, rtap_len);
rthdr->it_len = cpu_to_le16(rtap_len);
rthdr->it_present =
cpu_to_le32(BIT(IEEE80211_RADIOTAP_TX_FLAGS) |
BIT(IEEE80211_RADIOTAP_DATA_RETRIES));
pos = (unsigned char *)(rthdr + 1);
/*
* XXX: Once radiotap gets the bitmap reset thing the vendor
* extensions proposal contains, we can actually report
* the whole set of tries we did.
*/
/* IEEE80211_RADIOTAP_RATE */
if (status_rate) {
if (!(status_rate->rate_idx.flags &
(RATE_INFO_FLAGS_MCS |
RATE_INFO_FLAGS_DMG |
RATE_INFO_FLAGS_EDMG |
RATE_INFO_FLAGS_VHT_MCS |
RATE_INFO_FLAGS_HE_MCS)))
legacy_rate = status_rate->rate_idx.legacy;
} else if (info->status.rates[0].idx >= 0 &&
!(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS |
IEEE80211_TX_RC_VHT_MCS)))
legacy_rate =
sband->bitrates[info->status.rates[0].idx].bitrate;
if (legacy_rate) {
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_RATE));
*pos = DIV_ROUND_UP(legacy_rate, 5 * (1 << shift));
/* padding for tx flags */
pos += 2;
}
/* IEEE80211_RADIOTAP_TX_FLAGS */
txflags = 0;
if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
!is_multicast_ether_addr(hdr->addr1))
txflags |= IEEE80211_RADIOTAP_F_TX_FAIL;
if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
txflags |= IEEE80211_RADIOTAP_F_TX_CTS;
if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
txflags |= IEEE80211_RADIOTAP_F_TX_RTS;
put_unaligned_le16(txflags, pos);
pos += 2;
/* IEEE80211_RADIOTAP_DATA_RETRIES */
/* for now report the total retry_count */
*pos = retry_count;
pos++;
if (status_rate && (status_rate->rate_idx.flags & RATE_INFO_FLAGS_MCS))
{
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS));
pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
IEEE80211_RADIOTAP_MCS_HAVE_GI |
IEEE80211_RADIOTAP_MCS_HAVE_BW;
if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_SHORT_GI)
pos[1] |= IEEE80211_RADIOTAP_MCS_SGI;
if (status_rate->rate_idx.bw == RATE_INFO_BW_40)
pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40;
pos[2] = status_rate->rate_idx.mcs;
pos += 3;
} else if (status_rate && (status_rate->rate_idx.flags &
RATE_INFO_FLAGS_VHT_MCS))
{
u16 known = local->hw.radiotap_vht_details &
(IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH);
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_VHT));
/* required alignment from rthdr */
pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2);
/* u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* */
put_unaligned_le16(known, pos);
pos += 2;
/* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */
if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_SHORT_GI)
*pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI;
pos++;
/* u8 bandwidth */
switch (status_rate->rate_idx.bw) {
case RATE_INFO_BW_160:
*pos = 11;
break;
case RATE_INFO_BW_80:
*pos = 4;
break;
case RATE_INFO_BW_40:
*pos = 1;
break;
default:
*pos = 0;
break;
}
pos++;
/* u8 mcs_nss[4] */
*pos = (status_rate->rate_idx.mcs << 4) |
status_rate->rate_idx.nss;
pos += 4;
/* u8 coding */
pos++;
/* u8 group_id */
pos++;
/* u16 partial_aid */
pos += 2;
} else if (status_rate && (status_rate->rate_idx.flags &
RATE_INFO_FLAGS_HE_MCS))
{
struct ieee80211_radiotap_he *he;
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_HE));
/* required alignment from rthdr */
pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2);
he = (struct ieee80211_radiotap_he *)pos;
he->data1 = cpu_to_le16(IEEE80211_RADIOTAP_HE_DATA1_FORMAT_SU |
IEEE80211_RADIOTAP_HE_DATA1_DATA_MCS_KNOWN |
IEEE80211_RADIOTAP_HE_DATA1_DATA_DCM_KNOWN |
IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN);
he->data2 = cpu_to_le16(IEEE80211_RADIOTAP_HE_DATA2_GI_KNOWN);
#define HE_PREP(f, val) le16_encode_bits(val, IEEE80211_RADIOTAP_HE_##f)
he->data6 |= HE_PREP(DATA6_NSTS, status_rate->rate_idx.nss);
#define CHECK_GI(s) \
BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_GI_##s != \
(int)NL80211_RATE_INFO_HE_GI_##s)
CHECK_GI(0_8);
CHECK_GI(1_6);
CHECK_GI(3_2);
he->data3 |= HE_PREP(DATA3_DATA_MCS, status_rate->rate_idx.mcs);
he->data3 |= HE_PREP(DATA3_DATA_DCM, status_rate->rate_idx.he_dcm);
he->data5 |= HE_PREP(DATA5_GI, status_rate->rate_idx.he_gi);
switch (status_rate->rate_idx.bw) {
case RATE_INFO_BW_20:
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_20MHZ);
break;
case RATE_INFO_BW_40:
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_40MHZ);
break;
case RATE_INFO_BW_80:
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_80MHZ);
break;
case RATE_INFO_BW_160:
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_160MHZ);
break;
case RATE_INFO_BW_HE_RU:
#define CHECK_RU_ALLOC(s) \
BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_##s##T != \
NL80211_RATE_INFO_HE_RU_ALLOC_##s + 4)
CHECK_RU_ALLOC(26);
CHECK_RU_ALLOC(52);
CHECK_RU_ALLOC(106);
CHECK_RU_ALLOC(242);
CHECK_RU_ALLOC(484);
CHECK_RU_ALLOC(996);
CHECK_RU_ALLOC(2x996);
he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC,
status_rate->rate_idx.he_ru_alloc + 4);
break;
default:
WARN_ONCE(1, "Invalid SU BW %d\n", status_rate->rate_idx.bw);
}
pos += sizeof(struct ieee80211_radiotap_he);
}
if (status_rate || info->status.rates[0].idx < 0)
return;
/* IEEE80211_RADIOTAP_MCS
* IEEE80211_RADIOTAP_VHT */
if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS));
pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
IEEE80211_RADIOTAP_MCS_HAVE_GI |
IEEE80211_RADIOTAP_MCS_HAVE_BW;
if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
pos[1] |= IEEE80211_RADIOTAP_MCS_SGI;
if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40;
if (info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD)
pos[1] |= IEEE80211_RADIOTAP_MCS_FMT_GF;
pos[2] = info->status.rates[0].idx;
pos += 3;
} else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) {
u16 known = local->hw.radiotap_vht_details &
(IEEE80211_RADIOTAP_VHT_KNOWN_GI |
IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH);
rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_VHT));
/* required alignment from rthdr */
pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2);
/* u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* */
put_unaligned_le16(known, pos);
pos += 2;
/* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */
if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
*pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI;
pos++;
/* u8 bandwidth */
if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
*pos = 1;
else if (info->status.rates[0].flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
*pos = 4;
else if (info->status.rates[0].flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
*pos = 11;
else /* IEEE80211_TX_RC_{20_MHZ_WIDTH,FIXME:DUP_DATA} */
*pos = 0;
pos++;
/* u8 mcs_nss[4] */
*pos = (ieee80211_rate_get_vht_mcs(&info->status.rates[0]) << 4) |
ieee80211_rate_get_vht_nss(&info->status.rates[0]);
pos += 4;
/* u8 coding */
pos++;
/* u8 group_id */
pos++;
/* u16 partial_aid */
pos += 2;
}
}
/*
* Handles the tx for TDLS teardown frames.
* If the frame wasn't ACKed by the peer - it will be re-sent through the AP
*/
static void ieee80211_tdls_td_tx_handle(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb, u32 flags)
{
struct sk_buff *teardown_skb;
struct sk_buff *orig_teardown_skb;
bool is_teardown = false;
/* Get the teardown data we need and free the lock */
spin_lock(&sdata->u.mgd.teardown_lock);
teardown_skb = sdata->u.mgd.teardown_skb;
orig_teardown_skb = sdata->u.mgd.orig_teardown_skb;
if ((skb == orig_teardown_skb) && teardown_skb) {
sdata->u.mgd.teardown_skb = NULL;
sdata->u.mgd.orig_teardown_skb = NULL;
is_teardown = true;
}
spin_unlock(&sdata->u.mgd.teardown_lock);
if (is_teardown) {
/* This mechanism relies on being able to get ACKs */
WARN_ON(!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS));
/* Check if peer has ACKed */
if (flags & IEEE80211_TX_STAT_ACK) {
dev_kfree_skb_any(teardown_skb);
} else {
tdls_dbg(sdata,
"TDLS Resending teardown through AP\n");
ieee80211_subif_start_xmit(teardown_skb, skb->dev);
}
}
}
static struct ieee80211_sub_if_data *
ieee80211_sdata_from_skb(struct ieee80211_local *local, struct sk_buff *skb)
{
struct ieee80211_sub_if_data *sdata;
if (skb->dev) {
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!sdata->dev)
continue;
if (skb->dev == sdata->dev)
return sdata;
}
return NULL;
}
return rcu_dereference(local->p2p_sdata);
}
static void ieee80211_report_ack_skb(struct ieee80211_local *local,
struct ieee80211_tx_info *info,
bool acked, bool dropped)
{
struct sk_buff *skb;
unsigned long flags;
spin_lock_irqsave(&local->ack_status_lock, flags);
skb = idr_remove(&local->ack_status_frames, info->ack_frame_id);
spin_unlock_irqrestore(&local->ack_status_lock, flags);
if (!skb)
return;
if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) {
u64 cookie = IEEE80211_SKB_CB(skb)->ack.cookie;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hdr *hdr = (void *)skb->data;
bool is_valid_ack_signal =
!!(info->status.flags & IEEE80211_TX_STATUS_ACK_SIGNAL_VALID);
rcu_read_lock();
sdata = ieee80211_sdata_from_skb(local, skb);
if (sdata) {
if (skb->protocol == sdata->control_port_protocol ||
skb->protocol == cpu_to_be16(ETH_P_PREAUTH))
cfg80211_control_port_tx_status(&sdata->wdev,
cookie,
skb->data,
skb->len,
acked,
GFP_ATOMIC);
else if (ieee80211_is_any_nullfunc(hdr->frame_control))
cfg80211_probe_status(sdata->dev, hdr->addr1,
cookie, acked,
info->status.ack_signal,
is_valid_ack_signal,
GFP_ATOMIC);
else if (ieee80211_is_mgmt(hdr->frame_control))
cfg80211_mgmt_tx_status(&sdata->wdev, cookie,
skb->data, skb->len,
acked, GFP_ATOMIC);
else
pr_warn("Unknown status report in ack skb\n");
}
rcu_read_unlock();
dev_kfree_skb_any(skb);
} else if (dropped) {
dev_kfree_skb_any(skb);
} else {
/* consumes skb */
skb_complete_wifi_ack(skb, acked);
}
}
static void ieee80211_report_used_skb(struct ieee80211_local *local,
struct sk_buff *skb, bool dropped)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u16 tx_time_est = ieee80211_info_get_tx_time_est(info);
struct ieee80211_hdr *hdr = (void *)skb->data;
bool acked = info->flags & IEEE80211_TX_STAT_ACK;
if (dropped)
acked = false;
if (tx_time_est) {
struct sta_info *sta;
rcu_read_lock();
sta = sta_info_get_by_addrs(local, hdr->addr1, hdr->addr2);
ieee80211_sta_update_pending_airtime(local, sta,
skb_get_queue_mapping(skb),
tx_time_est,
true);
rcu_read_unlock();
}
if (info->flags & IEEE80211_TX_INTFL_MLME_CONN_TX) {
struct ieee80211_sub_if_data *sdata;
rcu_read_lock();
sdata = ieee80211_sdata_from_skb(local, skb);
if (!sdata) {
skb->dev = NULL;
} else {
unsigned int hdr_size =
ieee80211_hdrlen(hdr->frame_control);
/* Check to see if packet is a TDLS teardown packet */
if (ieee80211_is_data(hdr->frame_control) &&
(ieee80211_get_tdls_action(skb, hdr_size) ==
WLAN_TDLS_TEARDOWN)) {
ieee80211_tdls_td_tx_handle(local, sdata, skb,
info->flags);
} else if (ieee80211_s1g_is_twt_setup(skb)) {
if (!acked) {
struct sk_buff *qskb;
qskb = skb_clone(skb, GFP_ATOMIC);
if (qskb) {
skb_queue_tail(&sdata->status_queue,
qskb);
ieee80211_queue_work(&local->hw,
&sdata->work);
}
}
} else {
ieee80211_mgd_conn_tx_status(sdata,
hdr->frame_control,
acked);
}
}
rcu_read_unlock();
} else if (info->ack_frame_id) {
ieee80211_report_ack_skb(local, info, acked, dropped);
}
if (!dropped && skb->destructor) {
skb->wifi_acked_valid = 1;
skb->wifi_acked = acked;
}
ieee80211_led_tx(local);
if (skb_has_frag_list(skb)) {
kfree_skb_list(skb_shinfo(skb)->frag_list);
skb_shinfo(skb)->frag_list = NULL;
}
}
/*
* Use a static threshold for now, best value to be determined
* by testing ...
* Should it depend on:
* - on # of retransmissions
* - current throughput (higher value for higher tpt)?
*/
#define STA_LOST_PKT_THRESHOLD 50
#define STA_LOST_PKT_TIME HZ /* 1 sec since last ACK */
#define STA_LOST_TDLS_PKT_TIME (10*HZ) /* 10secs since last ACK */
static void ieee80211_lost_packet(struct sta_info *sta,
struct ieee80211_tx_info *info)
{
unsigned long pkt_time = STA_LOST_PKT_TIME;
unsigned int pkt_thr = STA_LOST_PKT_THRESHOLD;
/* If driver relies on its own algorithm for station kickout, skip
* mac80211 packet loss mechanism.
*/
if (ieee80211_hw_check(&sta->local->hw, REPORTS_LOW_ACK))
return;
/* This packet was aggregated but doesn't carry status info */
if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
!(info->flags & IEEE80211_TX_STAT_AMPDU))
return;
sta->deflink.status_stats.lost_packets++;
if (sta->sta.tdls) {
pkt_time = STA_LOST_TDLS_PKT_TIME;
pkt_thr = STA_LOST_PKT_THRESHOLD;
}
/*
* If we're in TDLS mode, make sure that all STA_LOST_PKT_THRESHOLD
* of the last packets were lost, and that no ACK was received in the
* last STA_LOST_TDLS_PKT_TIME ms, before triggering the CQM packet-loss
* mechanism.
* For non-TDLS, use STA_LOST_PKT_THRESHOLD and STA_LOST_PKT_TIME
*/
if (sta->deflink.status_stats.lost_packets < pkt_thr ||
!time_after(jiffies, sta->deflink.status_stats.last_pkt_time + pkt_time))
return;
cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr,
sta->deflink.status_stats.lost_packets,
GFP_ATOMIC);
sta->deflink.status_stats.lost_packets = 0;
}
static int ieee80211_tx_get_rates(struct ieee80211_hw *hw,
struct ieee80211_tx_info *info,
int *retry_count)
{
int count = -1;
int i;
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
!(info->flags & IEEE80211_TX_STAT_AMPDU)) {
/* just the first aggr frame carry status info */
info->status.rates[i].idx = -1;
info->status.rates[i].count = 0;
break;
} else if (info->status.rates[i].idx < 0) {
break;
} else if (i >= hw->max_report_rates) {
/* the HW cannot have attempted that rate */
info->status.rates[i].idx = -1;
info->status.rates[i].count = 0;
break;
}
count += info->status.rates[i].count;
}
if (count < 0)
count = 0;
*retry_count = count;
return i - 1;
}
void ieee80211_tx_monitor(struct ieee80211_local *local, struct sk_buff *skb,
struct ieee80211_supported_band *sband,
int retry_count, int shift, bool send_to_cooked,
struct ieee80211_tx_status *status)
{
struct sk_buff *skb2;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sub_if_data *sdata;
struct net_device *prev_dev = NULL;
int rtap_len;
/* send frame to monitor interfaces now */
rtap_len = ieee80211_tx_radiotap_len(info, status);
if (WARN_ON_ONCE(skb_headroom(skb) < rtap_len)) {
pr_err("ieee80211_tx_status: headroom too small\n");
dev_kfree_skb(skb);
return;
}
ieee80211_add_tx_radiotap_header(local, sband, skb, retry_count,
rtap_len, shift, status);
/* XXX: is this sufficient for BPF? */
skb_reset_mac_header(skb);
skb->ip_summed = CHECKSUM_UNNECESSARY;
skb->pkt_type = PACKET_OTHERHOST;
skb->protocol = htons(ETH_P_802_2);
memset(skb->cb, 0, sizeof(skb->cb));
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
if (!ieee80211_sdata_running(sdata))
continue;
if ((sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) &&
!send_to_cooked)
continue;
if (prev_dev) {
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2) {
skb2->dev = prev_dev;
netif_rx(skb2);
}
}
prev_dev = sdata->dev;
}
}
if (prev_dev) {
skb->dev = prev_dev;
netif_rx(skb);
skb = NULL;
}
rcu_read_unlock();
dev_kfree_skb(skb);
}
static void __ieee80211_tx_status(struct ieee80211_hw *hw,
struct ieee80211_tx_status *status,
int rates_idx, int retry_count)
{
struct sk_buff *skb = status->skb;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = status->info;
struct sta_info *sta;
__le16 fc;
struct ieee80211_supported_band *sband;
bool send_to_cooked;
bool acked;
bool noack_success;
struct ieee80211_bar *bar;
int shift = 0;
int tid = IEEE80211_NUM_TIDS;
sband = local->hw.wiphy->bands[info->band];
fc = hdr->frame_control;
if (status->sta) {
sta = container_of(status->sta, struct sta_info, sta);
shift = ieee80211_vif_get_shift(&sta->sdata->vif);
if (info->flags & IEEE80211_TX_STATUS_EOSP)
clear_sta_flag(sta, WLAN_STA_SP);
acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
noack_success = !!(info->flags &
IEEE80211_TX_STAT_NOACK_TRANSMITTED);
/* mesh Peer Service Period support */
if (ieee80211_vif_is_mesh(&sta->sdata->vif) &&
ieee80211_is_data_qos(fc))
ieee80211_mpsp_trigger_process(
ieee80211_get_qos_ctl(hdr), sta, true, acked);
if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL) &&
(ieee80211_is_data(hdr->frame_control)) &&
(rates_idx != -1))
sta->deflink.tx_stats.last_rate =
info->status.rates[rates_idx];
if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
(ieee80211_is_data_qos(fc))) {
u16 ssn;
u8 *qc;
qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
& IEEE80211_SCTL_SEQ);
ieee80211_send_bar(&sta->sdata->vif, hdr->addr1,
tid, ssn);
} else if (ieee80211_is_data_qos(fc)) {
u8 *qc = ieee80211_get_qos_ctl(hdr);
tid = qc[0] & 0xf;
}
if (!acked && ieee80211_is_back_req(fc)) {
u16 control;
/*
* BAR failed, store the last SSN and retry sending
* the BAR when the next unicast transmission on the
* same TID succeeds.
*/
bar = (struct ieee80211_bar *) skb->data;
control = le16_to_cpu(bar->control);
if (!(control & IEEE80211_BAR_CTRL_MULTI_TID)) {
u16 ssn = le16_to_cpu(bar->start_seq_num);
tid = (control &
IEEE80211_BAR_CTRL_TID_INFO_MASK) >>
IEEE80211_BAR_CTRL_TID_INFO_SHIFT;
ieee80211_set_bar_pending(sta, tid, ssn);
}
}
if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
ieee80211_handle_filtered_frame(local, sta, skb);
return;
} else if (ieee80211_is_data_present(fc)) {
if (!acked && !noack_success)
sta->deflink.status_stats.msdu_failed[tid]++;
sta->deflink.status_stats.msdu_retries[tid] +=
retry_count;
}
if (!(info->flags & IEEE80211_TX_CTL_INJECTED) && acked)
ieee80211_frame_acked(sta, skb);
} else if (wiphy_ext_feature_isset(local->hw.wiphy,
NL80211_EXT_FEATURE_AIRTIME_FAIRNESS)) {
struct ieee80211_sub_if_data *sdata;
struct ieee80211_txq *txq;
u32 airtime;
/* Account airtime to multicast queue */
sdata = ieee80211_sdata_from_skb(local, skb);
if (sdata && (txq = sdata->vif.txq)) {
airtime = info->status.tx_time ?:
ieee80211_calc_expected_tx_airtime(hw,
&sdata->vif,
NULL,
skb->len,
false);
ieee80211_register_airtime(txq, airtime, 0);
}
}
/* SNMP counters
* Fragments are passed to low-level drivers as separate skbs, so these
* are actually fragments, not frames. Update frame counters only for
* the first fragment of the frame. */
if ((info->flags & IEEE80211_TX_STAT_ACK) ||
(info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED)) {
if (ieee80211_is_first_frag(hdr->seq_ctrl)) {
I802_DEBUG_INC(local->dot11TransmittedFrameCount);
if (is_multicast_ether_addr(ieee80211_get_DA(hdr)))
I802_DEBUG_INC(local->dot11MulticastTransmittedFrameCount);
if (retry_count > 0)
I802_DEBUG_INC(local->dot11RetryCount);
if (retry_count > 1)
I802_DEBUG_INC(local->dot11MultipleRetryCount);
}
/* This counter shall be incremented for an acknowledged MPDU
* with an individual address in the address 1 field or an MPDU
* with a multicast address in the address 1 field of type Data
* or Management. */
if (!is_multicast_ether_addr(hdr->addr1) ||
ieee80211_is_data(fc) ||
ieee80211_is_mgmt(fc))
I802_DEBUG_INC(local->dot11TransmittedFragmentCount);
} else {
if (ieee80211_is_first_frag(hdr->seq_ctrl))
I802_DEBUG_INC(local->dot11FailedCount);
}
if (ieee80211_is_any_nullfunc(fc) &&
ieee80211_has_pm(fc) &&
ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
local->ps_sdata && !(local->scanning)) {
if (info->flags & IEEE80211_TX_STAT_ACK)
local->ps_sdata->u.mgd.flags |=
IEEE80211_STA_NULLFUNC_ACKED;
mod_timer(&local->dynamic_ps_timer,
jiffies + msecs_to_jiffies(10));
}
ieee80211_report_used_skb(local, skb, false);
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
/* Need to make a copy before skb->cb gets cleared */
send_to_cooked = !!(info->flags & IEEE80211_TX_CTL_INJECTED) ||
!(ieee80211_is_data(fc));
/*
* This is a bit racy but we can avoid a lot of work
* with this test...
*/
if (!local->monitors && (!send_to_cooked || !local->cooked_mntrs)) {
if (status->free_list)
list_add_tail(&skb->list, status->free_list);
else
dev_kfree_skb(skb);
return;
}
/* send to monitor interfaces */
ieee80211_tx_monitor(local, skb, sband, retry_count, shift,
send_to_cooked, status);
}
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_status status = {
.skb = skb,
.info = IEEE80211_SKB_CB(skb),
};
struct sta_info *sta;
rcu_read_lock();
sta = sta_info_get_by_addrs(local, hdr->addr1, hdr->addr2);
if (sta)
status.sta = &sta->sta;
ieee80211_tx_status_ext(hw, &status);
rcu_read_unlock();
}
EXPORT_SYMBOL(ieee80211_tx_status);
void ieee80211_tx_status_ext(struct ieee80211_hw *hw,
struct ieee80211_tx_status *status)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_tx_info *info = status->info;
struct ieee80211_sta *pubsta = status->sta;
struct sk_buff *skb = status->skb;
struct ieee80211_supported_band *sband;
struct sta_info *sta = NULL;
int rates_idx, retry_count;
bool acked, noack_success, ack_signal_valid;
u16 tx_time_est;
if (pubsta) {
sta = container_of(pubsta, struct sta_info, sta);
if (status->n_rates)
sta->deflink.tx_stats.last_rate_info =
status->rates[status->n_rates - 1].rate_idx;
}
if (skb && (tx_time_est =
ieee80211_info_get_tx_time_est(IEEE80211_SKB_CB(skb))) > 0) {
/* Do this here to avoid the expensive lookup of the sta
* in ieee80211_report_used_skb().
*/
ieee80211_sta_update_pending_airtime(local, sta,
skb_get_queue_mapping(skb),
tx_time_est,
true);
ieee80211_info_set_tx_time_est(IEEE80211_SKB_CB(skb), 0);
}
if (!status->info)
goto free;
rates_idx = ieee80211_tx_get_rates(hw, info, &retry_count);
sband = hw->wiphy->bands[info->band];
acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
noack_success = !!(info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED);
ack_signal_valid =
!!(info->status.flags & IEEE80211_TX_STATUS_ACK_SIGNAL_VALID);
if (pubsta) {
struct ieee80211_sub_if_data *sdata = sta->sdata;
if (!acked && !noack_success)
sta->deflink.status_stats.retry_failed++;
sta->deflink.status_stats.retry_count += retry_count;
if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
skb && !(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP))
ieee80211_sta_tx_notify(sdata, (void *) skb->data,
acked, info->status.tx_time);
if (acked) {
sta->deflink.status_stats.last_ack = jiffies;
if (sta->deflink.status_stats.lost_packets)
sta->deflink.status_stats.lost_packets = 0;
/* Track when last packet was ACKed */
sta->deflink.status_stats.last_pkt_time = jiffies;
/* Reset connection monitor */
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
unlikely(sdata->u.mgd.probe_send_count > 0))
sdata->u.mgd.probe_send_count = 0;
if (ack_signal_valid) {
sta->deflink.status_stats.last_ack_signal =
(s8)info->status.ack_signal;
sta->deflink.status_stats.ack_signal_filled = true;
ewma_avg_signal_add(&sta->deflink.status_stats.avg_ack_signal,
-info->status.ack_signal);
}
} else if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
/*
* The STA is in power save mode, so assume
* that this TX packet failed because of that.
*/
if (skb)
ieee80211_handle_filtered_frame(local, sta, skb);
return;
} else if (noack_success) {
/* nothing to do here, do not account as lost */
} else {
ieee80211_lost_packet(sta, info);
}
}
rate_control_tx_status(local, sband, status);
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
ieee80211s_update_metric(local, sta, status);
}
if (skb && !(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP))
return __ieee80211_tx_status(hw, status, rates_idx,
retry_count);
if (acked || noack_success) {
I802_DEBUG_INC(local->dot11TransmittedFrameCount);
if (!pubsta)
I802_DEBUG_INC(local->dot11MulticastTransmittedFrameCount);
if (retry_count > 0)
I802_DEBUG_INC(local->dot11RetryCount);
if (retry_count > 1)
I802_DEBUG_INC(local->dot11MultipleRetryCount);
} else {
I802_DEBUG_INC(local->dot11FailedCount);
}
free:
if (!skb)
return;
ieee80211_report_used_skb(local, skb, false);
if (status->free_list)
list_add_tail(&skb->list, status->free_list);
else
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status_ext);
void ieee80211_tx_rate_update(struct ieee80211_hw *hw,
struct ieee80211_sta *pubsta,
struct ieee80211_tx_info *info)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_supported_band *sband = hw->wiphy->bands[info->band];
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
struct ieee80211_tx_status status = {
.info = info,
.sta = pubsta,
};
rate_control_tx_status(local, sband, &status);
if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL))
sta->deflink.tx_stats.last_rate = info->status.rates[0];
}
EXPORT_SYMBOL(ieee80211_tx_rate_update);
void ieee80211_tx_status_8023(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct sk_buff *skb)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_tx_status status = {
.skb = skb,
.info = IEEE80211_SKB_CB(skb),
};
struct sta_info *sta;
sdata = vif_to_sdata(vif);
rcu_read_lock();
if (!ieee80211_lookup_ra_sta(sdata, skb, &sta) && !IS_ERR(sta))
status.sta = &sta->sta;
ieee80211_tx_status_ext(hw, &status);
rcu_read_unlock();
}
EXPORT_SYMBOL(ieee80211_tx_status_8023);
void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr,
num_packets, GFP_ATOMIC);
}
EXPORT_SYMBOL(ieee80211_report_low_ack);
void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct ieee80211_local *local = hw_to_local(hw);
ieee80211_report_used_skb(local, skb, true);
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL(ieee80211_free_txskb);
void ieee80211_purge_tx_queue(struct ieee80211_hw *hw,
struct sk_buff_head *skbs)
{
struct sk_buff *skb;
while ((skb = __skb_dequeue(skbs)))
ieee80211_free_txskb(hw, skb);
}
Reference in New Issue View Git Blame Copy Permalink