forked from Minki/linux
8d2faea672
Core changes:
- Root out the wrapper devm_gpiod_get() and gpiod_get() etc
versions of the descriptor calls that did not use the flags
argument on the end. This was around for too long and eventually
Uwe Kleine-König took the time to clean it out and the last
users are removed along with the macros in this tag. In several
cases the use of flags simplifies the code. For this reason we
have (ACKed) patches hitting in DRM, IIO, media, NFC, USB+PHY
up until we hammer in the nail with removing the macros.
- Add a fat document describing how much ready-made GPIO stuff
we have i the kernel to discourage people from reinventing
a square wheel in userspace, as so often happens.
- Create a separate lockdep class for each instance of a GPIO
IRQ chip instead of using one class for all chips, as the current
code will not work with systems with several GPIO chips doing
lockdep debugging.
- Protect against driver unloading also when a GPIO line is only
used as IRQ for the GPIOLIB_IRQCHIP helpers.
- If the GPIO chip has no designated owner, assign the parent
device driver owner as owner.
- Consolidation of chained IRQ handler install/remove replacing
all call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a
combined call to irq_set_chained_handler_and_data(). This
series was created by Thomas Gleixner after the problem was
observed by Russell King.
- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which
is way cleaner.
- Tglx and Jiang Liu wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs
from IRQ numbers. The goal is to get rid of the irq number
from the handlers in the IRQ flow which is nice.
- Rob Herring killed off the set_irq_flags() for all GPIO
drivers. This was an ARM specific function that is replaced
with the generic irq_modify_status() where special flags
are actually needed.
- When an OF node has a pin range for its GPIOs, return
-EPROBE_DEFER if the pin controller isn't available.
Pretty logical, yet needed to be fixed.
- If a driver using GPIOLIB_IRQCHIP has its own
irq_*_resources call back, then call these instead of the
defaults provided by the GPIOLIB.
- Fix an undocumented ABI hole: named GPIOs were not
properly documented.
Driver improvements:
- Add get_direction() support to the generic GPIO driver, it's
strange that we didn't have that before.
- Make it possible to have input-only GPIO chips using the
generic GPIO driver.
- Clean out platform data support from the Emma Mobile (EM)
driver
- Finegrained runtime PM support for the RCAR driver.
- Support r8a7795 (R-car H3) in the RCAR driver.
- Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.
- Some consolidation and new support in the MPC8xxx driver,
we now support MPC5125.
- Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
spinlocks making it work better with the realime patches.
- Interrupt support for the EXTRAXFS GPIO driver.
- Make the ETRAXFS GPIO driver support also ARTPEC-3.
- Interrupt and wakeup support for the BRCMSTB driver, also for
wakeup from S5 cold boot.
- Mask MXC IRQs during suspend.
- Improve OMAP2 GPIO set_debounce() to work according to spec.
- The VF610 driver handles IRQs properly.
New drivers:
- ZTE ZX GPIO driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV52lvAAoJEEEQszewGV1zOVcP/2ZgkfRgl119LZnWShfrEJWq
UXaNzSaPNgvDzvGaqqi62SZQuhrdIWRKfMPtAuMGbEn5aJx0JC5UAOYjjfkKBqpO
toqc1w2DScc0JTorY8qgczIBDO1A3ZBAcIvXXpOduy/JaKPoQteRN8WYTynPw48/
0+97ZODwhyOkfeqmvUClkc9gW4XT68dudb0Lv1nQjsZmd1dHF2PZlwH3aL9sV68j
GJAqf09xNqZaWWQBhs+J3ptsYjaJfYjo9NOOUf0Y/UgqXO3vB+2S4EmRATaRHS2F
aHdj03sNZCNSDEa35WwetbLRGxPzSWmfxmBzQQ1baGdcJICn7Yv58EklPKRvwtMo
ZpUsgiOV4OUIEClPJohs4xbl2HRsOYB3VbcihkXjVAxS6i2/jgA3Tn8ATvUSZ8wq
TX8D6BfciigRCkT2G+B0TQBmcX1IQsMd1DBUNfw7Dk1TK/vxH4UYWbke422RjKGz
ORJ+0DfShMCdYjrCVlt7UbFcqE3L5CnrztLQ3oFt0om2JsSWztV9V579G+Dqo9CI
fE4G3xlsF33UCvXcmnOp6PuU+ZYBodLggkmK4REy2D3LCOnkcKq0U8Fj5RssApZ9
FdqVYck555ZpcBiN8ihB97WsmU+0XhBjblCbgzr6GxUw8EJ4x8H9nlraA6bluFoP
9c2qgPxjCq/VWA/F0YOU
=iQ2P
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.3 kernel cycle.
There is quite a lot going on in the GPIO subsystem this merge window,
so the main matter is decribed below.
The hits in other subsystems when making the GPIO flags optional are
all ACKed by their respective subsystem maintainers.
Core changes:
- Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
of the descriptor calls that did not use the flags argument on the
end. This was around for too long and eventually Uwe Kleine-König
took the time to clean it out and the last users are removed along
with the macros in this tag. In several cases the use of flags
simplifies the code. For this reason we have (ACKed) patches
hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
nail with removing the macros.
- Add a fat document describing how much ready-made GPIO stuff we
have i the kernel to discourage people from reinventing a square
wheel in userspace, as so often happens.
- Create a separate lockdep class for each instance of a GPIO IRQ
chip instead of using one class for all chips, as the current code
will not work with systems with several GPIO chips doing lockdep
debugging.
- Protect against driver unloading also when a GPIO line is only used
as IRQ for the GPIOLIB_IRQCHIP helpers.
- If the GPIO chip has no designated owner, assign the parent device
driver owner as owner.
- Consolidation of chained IRQ handler install/remove replacing all
call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a combined
call to irq_set_chained_handler_and_data().
This series was created by Thomas Gleixner after the problem was
observed by Russell King.
- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which is
way cleaner.
- Tglx and Jiang Liu wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs from
IRQ numbers. The goal is to get rid of the irq number from the
handlers in the IRQ flow which is nice.
- Rob Herring killed off the set_irq_flags() for all GPIO drivers.
This was an ARM specific function that is replaced with the generic
irq_modify_status() where special flags are actually needed.
- When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
if the pin controller isn't available. Pretty logical, yet needed
to be fixed.
- If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
back, then call these instead of the defaults provided by the
GPIOLIB.
- Fix an undocumented ABI hole: named GPIOs were not properly
documented.
Driver improvements:
- Add get_direction() support to the generic GPIO driver, it's
strange that we didn't have that before.
- Make it possible to have input-only GPIO chips using the generic
GPIO driver.
- Clean out platform data support from the Emma Mobile (EM) driver
- Finegrained runtime PM support for the RCAR driver.
- Support r8a7795 (R-car H3) in the RCAR driver.
- Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.
- Some consolidation and new support in the MPC8xxx driver, we now
support MPC5125.
- Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
spinlocks making it work better with the realime patches.
- Interrupt support for the EXTRAXFS GPIO driver.
- Make the ETRAXFS GPIO driver support also ARTPEC-3.
- Interrupt and wakeup support for the BRCMSTB driver, also for
wakeup from S5 cold boot.
- Mask MXC IRQs during suspend.
- Improve OMAP2 GPIO set_debounce() to work according to spec.
- The VF610 driver handles IRQs properly.
New drivers:
- ZTE ZX GPIO driver"
* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
Revert "gpio: extraxfs: fix returnvar.cocci warnings"
gpio: tc3589x: use static container helper
gpio: xlp: fix error return code
gpio: vf610: handle level IRQ's properly
gpio: max732x: Fix error handling in probe()
gpio: omap: fix clk_prepare/unprepare usage
gpio: omap: protect regs access in omap_gpio_irq_handler
gpio: omap: fix omap2_set_gpio_debounce
gpio: omap: switch to use platform_get_irq
gpio: omap: remove wrong irq_domain_remove usage in probe
gpiolib: add description for gpio irqchip fields in struct gpio_chip
gpio: extraxfs: fix returnvar.cocci warnings
gpiolib: irqchip: use different lockdep class for each gpio irqchip
gpio/grgpio: fix deadlock in grgpio_irq_unmap()
Documentation: gpio: consumer: describe active low property
gpio: mxc: fix section mismatch warning
gpio/mxc: mask gpio interrupts in suspend
gpio: omap: Fix missing raw locks conversion
gpio: brcmstb: support wakeup from S5 cold boot
gpio: brcmstb: Add interrupt and wakeup source support
...
121 lines
5.0 KiB
Makefile
121 lines
5.0 KiB
Makefile
# generic gpio support: platform drivers, dedicated expander chips, etc
|
|
|
|
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
|
|
|
|
obj-$(CONFIG_GPIO_DEVRES) += devres.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib.o
|
|
obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o
|
|
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
|
|
obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o
|
|
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
|
|
|
|
# Device drivers. Generally keep list sorted alphabetically
|
|
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
|
|
|
|
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
|
|
obj-$(CONFIG_GPIO_74XX_MMIO) += gpio-74xx-mmio.o
|
|
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
|
|
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
|
|
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
|
|
obj-$(CONFIG_GPIO_ALTERA) += gpio-altera.o
|
|
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
|
|
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
|
|
obj-$(CONFIG_ATH79) += gpio-ath79.o
|
|
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
|
|
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
|
|
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
|
|
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
|
|
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
|
|
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
|
|
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
|
|
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
|
|
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
|
|
obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
|
|
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
|
|
obj-$(CONFIG_GPIO_EM) += gpio-em.o
|
|
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
|
|
obj-$(CONFIG_GPIO_ETRAXFS) += gpio-etraxfs.o
|
|
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
|
|
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
|
|
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
|
|
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
|
|
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
|
|
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
|
|
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
|
|
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
|
|
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
|
|
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
|
|
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
|
|
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
|
|
obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
|
|
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
|
|
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
|
|
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
|
|
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
|
|
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
|
|
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
|
|
obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o
|
|
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
|
|
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
|
|
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
|
|
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
|
|
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
|
|
obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o
|
|
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
|
|
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
|
|
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
|
|
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
|
|
obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
|
|
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
|
|
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
|
|
obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
|
|
obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
|
|
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
|
|
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
|
|
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
|
|
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
|
|
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
|
|
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
|
|
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
|
|
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
|
|
obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
|
|
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
|
|
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
|
|
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
|
|
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
|
|
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
|
|
obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o
|
|
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
|
|
obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
|
|
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
|
|
obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o
|
|
obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o
|
|
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
|
|
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
|
|
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
|
|
obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
|
|
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
|
|
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
|
|
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
|
|
obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
|
|
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
|
|
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
|
|
obj-$(CONFIG_GPIO_TZ1090) += gpio-tz1090.o
|
|
obj-$(CONFIG_GPIO_TZ1090_PDC) += gpio-tz1090-pdc.o
|
|
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
|
|
obj-$(CONFIG_GPIO_VF610) += gpio-vf610.o
|
|
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
|
|
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
|
|
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
|
|
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
|
|
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
|
|
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
|
|
obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
|
|
obj-$(CONFIG_GPIO_XGENE_SB) += gpio-xgene-sb.o
|
|
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
|
|
obj-$(CONFIG_GPIO_XLP) += gpio-xlp.o
|
|
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
|
|
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
|
|
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
|
|
obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
|