linux/drivers/mmc/host/sdhci-pxav3.c
Sebastian Hesselbarth 8c96a7a331 mmc: sdhci-pxav3: Move I/O clock to private data
As we are using references to the I/O clock throughout the driver,
move it to the private data. Also, in preparation for core clock,
rename it to clk_io.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10 12:40:46 +01:00

509 lines
12 KiB
C

/*
* Copyright (C) 2010 Marvell International Ltd.
* Zhangfei Gao <zhangfei.gao@marvell.com>
* Kevin Wang <dwang4@marvell.com>
* Mingwei Wang <mwwang@marvell.com>
* Philip Rakity <prakity@marvell.com>
* Mark Brown <markb@marvell.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/platform_data/pxa_sdhci.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/mbus.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
#define PXAV3_RPM_DELAY_MS 50
#define SD_CLOCK_BURST_SIZE_SETUP 0x10A
#define SDCLK_SEL 0x100
#define SDCLK_DELAY_SHIFT 9
#define SDCLK_DELAY_MASK 0x1f
#define SD_CFG_FIFO_PARAM 0x100
#define SDCFG_GEN_PAD_CLK_ON (1<<6)
#define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF
#define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24
#define SD_SPI_MODE 0x108
#define SD_CE_ATA_1 0x10C
#define SD_CE_ATA_2 0x10E
#define SDCE_MISC_INT (1<<2)
#define SDCE_MISC_INT_EN (1<<1)
struct sdhci_pxa {
struct clk *clk_io;
u8 power_mode;
};
/*
* These registers are relative to the second register region, for the
* MBus bridge.
*/
#define SDHCI_WINDOW_CTRL(i) (0x80 + ((i) << 3))
#define SDHCI_WINDOW_BASE(i) (0x84 + ((i) << 3))
#define SDHCI_MAX_WIN_NUM 8
static int mv_conf_mbus_windows(struct platform_device *pdev,
const struct mbus_dram_target_info *dram)
{
int i;
void __iomem *regs;
struct resource *res;
if (!dram) {
dev_err(&pdev->dev, "no mbus dram info\n");
return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!res) {
dev_err(&pdev->dev, "cannot get mbus registers\n");
return -EINVAL;
}
regs = ioremap(res->start, resource_size(res));
if (!regs) {
dev_err(&pdev->dev, "cannot map mbus registers\n");
return -ENOMEM;
}
for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
writel(0, regs + SDHCI_WINDOW_CTRL(i));
writel(0, regs + SDHCI_WINDOW_BASE(i));
}
for (i = 0; i < dram->num_cs; i++) {
const struct mbus_dram_window *cs = dram->cs + i;
/* Write size, attributes and target id to control register */
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
regs + SDHCI_WINDOW_CTRL(i));
/* Write base address to base register */
writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
}
iounmap(regs);
return 0;
}
static void pxav3_reset(struct sdhci_host *host, u8 mask)
{
struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
sdhci_reset(host, mask);
if (mask == SDHCI_RESET_ALL) {
/*
* tune timing of read data/command when crc error happen
* no performance impact
*/
if (pdata && 0 != pdata->clk_delay_cycles) {
u16 tmp;
tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
<< SDCLK_DELAY_SHIFT;
tmp |= SDCLK_SEL;
writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
}
}
}
#define MAX_WAIT_COUNT 5
static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_pxa *pxa = pltfm_host->priv;
u16 tmp;
int count;
if (pxa->power_mode == MMC_POWER_UP
&& power_mode == MMC_POWER_ON) {
dev_dbg(mmc_dev(host->mmc),
"%s: slot->power_mode = %d,"
"ios->power_mode = %d\n",
__func__,
pxa->power_mode,
power_mode);
/* set we want notice of when 74 clocks are sent */
tmp = readw(host->ioaddr + SD_CE_ATA_2);
tmp |= SDCE_MISC_INT_EN;
writew(tmp, host->ioaddr + SD_CE_ATA_2);
/* start sending the 74 clocks */
tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
tmp |= SDCFG_GEN_PAD_CLK_ON;
writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
/* slowest speed is about 100KHz or 10usec per clock */
udelay(740);
count = 0;
while (count++ < MAX_WAIT_COUNT) {
if ((readw(host->ioaddr + SD_CE_ATA_2)
& SDCE_MISC_INT) == 0)
break;
udelay(10);
}
if (count == MAX_WAIT_COUNT)
dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
/* clear the interrupt bit if posted */
tmp = readw(host->ioaddr + SD_CE_ATA_2);
tmp |= SDCE_MISC_INT;
writew(tmp, host->ioaddr + SD_CE_ATA_2);
}
pxa->power_mode = power_mode;
}
static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
{
u16 ctrl_2;
/*
* Set V18_EN -- UHS modes do not work without this.
* does not change signaling voltage
*/
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
/* Select Bus Speed Mode for host */
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
switch (uhs) {
case MMC_TIMING_UHS_SDR12:
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
break;
case MMC_TIMING_UHS_SDR25:
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
break;
case MMC_TIMING_UHS_SDR50:
ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
break;
case MMC_TIMING_UHS_SDR104:
ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
break;
case MMC_TIMING_MMC_DDR52:
case MMC_TIMING_UHS_DDR50:
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
}
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
dev_dbg(mmc_dev(host->mmc),
"%s uhs = %d, ctrl_2 = %04X\n",
__func__, uhs, ctrl_2);
}
static const struct sdhci_ops pxav3_sdhci_ops = {
.set_clock = sdhci_set_clock,
.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = pxav3_reset,
.set_uhs_signaling = pxav3_set_uhs_signaling,
};
static struct sdhci_pltfm_data sdhci_pxav3_pdata = {
.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
| SDHCI_QUIRK_32BIT_ADMA_SIZE
| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.ops = &pxav3_sdhci_ops,
};
#ifdef CONFIG_OF
static const struct of_device_id sdhci_pxav3_of_match[] = {
{
.compatible = "mrvl,pxav3-mmc",
},
{
.compatible = "marvell,armada-380-sdhci",
},
{},
};
MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
{
struct sdhci_pxa_platdata *pdata;
struct device_node *np = dev->of_node;
u32 clk_delay_cycles;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
if (clk_delay_cycles > 0)
pdata->clk_delay_cycles = clk_delay_cycles;
return pdata;
}
#else
static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev)
{
return NULL;
}
#endif
static int sdhci_pxav3_probe(struct platform_device *pdev)
{
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
int ret;
pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
if (!pxa)
return -ENOMEM;
host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, 0);
if (IS_ERR(host))
return PTR_ERR(host);
if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
if (ret < 0)
goto err_mbus_win;
}
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pxa;
pxa->clk_io = devm_clk_get(dev, NULL);
if (IS_ERR(pxa->clk_io)) {
dev_err(dev, "failed to get io clock\n");
ret = PTR_ERR(pxa->clk_io);
goto err_clk_get;
}
pltfm_host->clk = pxa->clk_io;
clk_prepare_enable(pxa->clk_io);
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev);
if (match) {
ret = mmc_of_parse(host->mmc);
if (ret)
goto err_of_parse;
sdhci_get_of_property(pdev);
pdata = pxav3_get_mmc_pdata(dev);
} else if (pdata) {
/* on-chip device */
if (pdata->flags & PXA_FLAG_CARD_PERMANENT)
host->mmc->caps |= MMC_CAP_NONREMOVABLE;
/* If slot design supports 8 bit data, indicate this to MMC. */
if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
host->mmc->caps |= MMC_CAP_8_BIT_DATA;
if (pdata->quirks)
host->quirks |= pdata->quirks;
if (pdata->quirks2)
host->quirks2 |= pdata->quirks2;
if (pdata->host_caps)
host->mmc->caps |= pdata->host_caps;
if (pdata->host_caps2)
host->mmc->caps2 |= pdata->host_caps2;
if (pdata->pm_caps)
host->mmc->pm_caps |= pdata->pm_caps;
if (gpio_is_valid(pdata->ext_cd_gpio)) {
ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio,
0);
if (ret) {
dev_err(mmc_dev(host->mmc),
"failed to allocate card detect gpio\n");
goto err_cd_req;
}
}
}
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS);
pm_runtime_use_autosuspend(&pdev->dev);
pm_suspend_ignore_children(&pdev->dev, 1);
ret = sdhci_add_host(host);
if (ret) {
dev_err(&pdev->dev, "failed to add host\n");
goto err_add_host;
}
platform_set_drvdata(pdev, host);
if (host->mmc->pm_caps & MMC_PM_KEEP_POWER) {
device_init_wakeup(&pdev->dev, 1);
host->mmc->pm_flags |= MMC_PM_WAKE_SDIO_IRQ;
} else {
device_init_wakeup(&pdev->dev, 0);
}
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
err_add_host:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
err_of_parse:
err_cd_req:
clk_disable_unprepare(pxa->clk_io);
err_clk_get:
err_mbus_win:
sdhci_pltfm_free(pdev);
return ret;
}
static int sdhci_pxav3_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_pxa *pxa = pltfm_host->priv;
pm_runtime_get_sync(&pdev->dev);
sdhci_remove_host(host, 1);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(pxa->clk_io);
sdhci_pltfm_free(pdev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sdhci_pxav3_suspend(struct device *dev)
{
int ret;
struct sdhci_host *host = dev_get_drvdata(dev);
pm_runtime_get_sync(dev);
ret = sdhci_suspend_host(host);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return ret;
}
static int sdhci_pxav3_resume(struct device *dev)
{
int ret;
struct sdhci_host *host = dev_get_drvdata(dev);
pm_runtime_get_sync(dev);
ret = sdhci_resume_host(host);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return ret;
}
#endif
#ifdef CONFIG_PM_RUNTIME
static int sdhci_pxav3_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
host->runtime_suspended = true;
spin_unlock_irqrestore(&host->lock, flags);
clk_disable_unprepare(pxa->clk_io);
return 0;
}
static int sdhci_pxav3_runtime_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
clk_prepare_enable(pxa->clk_io);
spin_lock_irqsave(&host->lock, flags);
host->runtime_suspended = false;
spin_unlock_irqrestore(&host->lock, flags);
return 0;
}
#endif
#ifdef CONFIG_PM
static const struct dev_pm_ops sdhci_pxav3_pmops = {
SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
sdhci_pxav3_runtime_resume, NULL)
};
#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)
#else
#define SDHCI_PXAV3_PMOPS NULL
#endif
static struct platform_driver sdhci_pxav3_driver = {
.driver = {
.name = "sdhci-pxav3",
#ifdef CONFIG_OF
.of_match_table = sdhci_pxav3_of_match,
#endif
.pm = SDHCI_PXAV3_PMOPS,
},
.probe = sdhci_pxav3_probe,
.remove = sdhci_pxav3_remove,
};
module_platform_driver(sdhci_pxav3_driver);
MODULE_DESCRIPTION("SDHCI driver for pxav3");
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_LICENSE("GPL v2");