forked from Minki/linux
b70661c708
The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: Arnd Bergmann <arnd@arndb.de> ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
486 lines
13 KiB
C
486 lines
13 KiB
C
/*
|
|
* linux/arch/arm/mach-realview/realview_eb.c
|
|
*
|
|
* Copyright (C) 2004 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/device.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/pl061.h>
|
|
#include <linux/amba/mmci.h>
|
|
#include <linux/amba/pl022.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irqchip/arm-gic.h>
|
|
#include <linux/platform_data/clk-realview.h>
|
|
#include <linux/reboot.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/smp_twd.h>
|
|
#include <asm/system_info.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <mach/board-eb.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#include "core.h"
|
|
|
|
static struct map_desc realview_eb_io_desc[] __initdata = {
|
|
{
|
|
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
},
|
|
#ifdef CONFIG_DEBUG_LL
|
|
{
|
|
.virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE),
|
|
.length = SZ_4K,
|
|
.type = MT_DEVICE,
|
|
}
|
|
#endif
|
|
};
|
|
|
|
static struct map_desc realview_eb11mp_io_desc[] __initdata = {
|
|
{
|
|
.virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE),
|
|
.length = REALVIEW_EB11MP_PRIV_MEM_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE),
|
|
.pfn = __phys_to_pfn(REALVIEW_EB11MP_L220_BASE),
|
|
.length = SZ_8K,
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
static void __init realview_eb_map_io(void)
|
|
{
|
|
iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
|
|
if (core_tile_eb11mp() || core_tile_a9mp())
|
|
iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
|
|
}
|
|
|
|
static struct pl061_platform_data gpio0_plat_data = {
|
|
.gpio_base = 0,
|
|
};
|
|
|
|
static struct pl061_platform_data gpio1_plat_data = {
|
|
.gpio_base = 8,
|
|
};
|
|
|
|
static struct pl061_platform_data gpio2_plat_data = {
|
|
.gpio_base = 16,
|
|
};
|
|
|
|
static struct pl022_ssp_controller ssp0_plat_data = {
|
|
.bus_id = 0,
|
|
.enable_dma = 0,
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
/*
|
|
* RealView EB AMBA devices
|
|
*/
|
|
|
|
/*
|
|
* These devices are connected via the core APB bridge
|
|
*/
|
|
#define GPIO2_IRQ { IRQ_EB_GPIO2 }
|
|
#define GPIO3_IRQ { IRQ_EB_GPIO3 }
|
|
|
|
#define AACI_IRQ { IRQ_EB_AACI }
|
|
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
|
|
#define KMI0_IRQ { IRQ_EB_KMI0 }
|
|
#define KMI1_IRQ { IRQ_EB_KMI1 }
|
|
|
|
/*
|
|
* These devices are connected directly to the multi-layer AHB switch
|
|
*/
|
|
#define EB_SMC_IRQ { }
|
|
#define MPMC_IRQ { }
|
|
#define EB_CLCD_IRQ { IRQ_EB_CLCD }
|
|
#define DMAC_IRQ { IRQ_EB_DMA }
|
|
|
|
/*
|
|
* These devices are connected via the core APB bridge
|
|
*/
|
|
#define SCTL_IRQ { }
|
|
#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
|
|
#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
|
|
#define GPIO1_IRQ { IRQ_EB_GPIO1 }
|
|
#define EB_RTC_IRQ { IRQ_EB_RTC }
|
|
|
|
/*
|
|
* These devices are connected via the DMA APB bridge
|
|
*/
|
|
#define SCI_IRQ { IRQ_EB_SCI }
|
|
#define EB_UART0_IRQ { IRQ_EB_UART0 }
|
|
#define EB_UART1_IRQ { IRQ_EB_UART1 }
|
|
#define EB_UART2_IRQ { IRQ_EB_UART2 }
|
|
#define EB_UART3_IRQ { IRQ_EB_UART3 }
|
|
#define EB_SSP_IRQ { IRQ_EB_SSP }
|
|
|
|
/* FPGA Primecells */
|
|
APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
|
|
APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
|
|
APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
|
|
APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
|
|
APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
|
|
|
|
/* DevChip Primecells */
|
|
AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
|
|
AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
|
|
AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
|
|
AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
|
|
APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
|
|
APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
|
|
APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
|
|
APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
|
|
APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
|
|
APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
|
|
APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
|
|
APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
|
|
APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
|
|
APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
|
|
|
|
static struct amba_device *amba_devs[] __initdata = {
|
|
&dmac_device,
|
|
&uart0_device,
|
|
&uart1_device,
|
|
&uart2_device,
|
|
&uart3_device,
|
|
&smc_device,
|
|
&clcd_device,
|
|
&sctl_device,
|
|
&wdog_device,
|
|
&gpio0_device,
|
|
&gpio1_device,
|
|
&gpio2_device,
|
|
&rtc_device,
|
|
&sci0_device,
|
|
&ssp0_device,
|
|
&aaci_device,
|
|
&mmc0_device,
|
|
&kmi0_device,
|
|
&kmi1_device,
|
|
};
|
|
|
|
/*
|
|
* RealView EB platform devices
|
|
*/
|
|
static struct resource realview_eb_flash_resource = {
|
|
.start = REALVIEW_EB_FLASH_BASE,
|
|
.end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct resource realview_eb_eth_resources[] = {
|
|
[0] = {
|
|
.start = REALVIEW_EB_ETH_BASE,
|
|
.end = REALVIEW_EB_ETH_BASE + SZ_64K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_EB_ETH,
|
|
.end = IRQ_EB_ETH,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Detect and register the correct Ethernet device. RealView/EB rev D
|
|
* platforms use the newer SMSC LAN9118 Ethernet chip
|
|
*/
|
|
static int eth_device_register(void)
|
|
{
|
|
void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
|
|
const char *name = NULL;
|
|
u32 idrev;
|
|
|
|
if (!eth_addr)
|
|
return -ENOMEM;
|
|
|
|
idrev = readl(eth_addr + 0x50);
|
|
if ((idrev & 0xFFFF0000) != 0x01180000)
|
|
/* SMSC LAN9118 not present, use LAN91C111 instead */
|
|
name = "smc91x";
|
|
|
|
iounmap(eth_addr);
|
|
return realview_eth_register(name, realview_eb_eth_resources);
|
|
}
|
|
|
|
static struct resource realview_eb_isp1761_resources[] = {
|
|
[0] = {
|
|
.start = REALVIEW_EB_USB_BASE,
|
|
.end = REALVIEW_EB_USB_BASE + SZ_128K - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_EB_USB,
|
|
.end = IRQ_EB_USB,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource pmu_resources[] = {
|
|
[0] = {
|
|
.start = IRQ_EB11MP_PMU_CPU0,
|
|
.end = IRQ_EB11MP_PMU_CPU0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_EB11MP_PMU_CPU1,
|
|
.end = IRQ_EB11MP_PMU_CPU1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = IRQ_EB11MP_PMU_CPU2,
|
|
.end = IRQ_EB11MP_PMU_CPU2,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[3] = {
|
|
.start = IRQ_EB11MP_PMU_CPU3,
|
|
.end = IRQ_EB11MP_PMU_CPU3,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device pmu_device = {
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(pmu_resources),
|
|
.resource = pmu_resources,
|
|
};
|
|
|
|
static struct resource char_lcd_resources[] = {
|
|
{
|
|
.start = REALVIEW_CHAR_LCD_BASE,
|
|
.end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_EB_CHARLCD,
|
|
.end = IRQ_EB_CHARLCD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device char_lcd_device = {
|
|
.name = "arm-charlcd",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(char_lcd_resources),
|
|
.resource = char_lcd_resources,
|
|
};
|
|
|
|
static void __init gic_init_irq(void)
|
|
{
|
|
if (core_tile_eb11mp() || core_tile_a9mp()) {
|
|
unsigned int pldctrl;
|
|
|
|
/* new irq mode */
|
|
writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
|
|
pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
|
|
pldctrl |= 0x00800000;
|
|
writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1);
|
|
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
|
|
|
|
/* core tile GIC, primary */
|
|
gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
|
|
__io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
|
|
|
|
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
|
|
/* board GIC, secondary */
|
|
gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE),
|
|
__io_address(REALVIEW_EB_GIC_CPU_BASE));
|
|
gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
|
|
#endif
|
|
} else {
|
|
/* board GIC, primary */
|
|
gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
|
|
__io_address(REALVIEW_EB_GIC_CPU_BASE));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile
|
|
*/
|
|
static void realview_eb11mp_fixup(void)
|
|
{
|
|
/* AMBA devices */
|
|
dmac_device.irq[0] = IRQ_EB11MP_DMA;
|
|
uart0_device.irq[0] = IRQ_EB11MP_UART0;
|
|
uart1_device.irq[0] = IRQ_EB11MP_UART1;
|
|
uart2_device.irq[0] = IRQ_EB11MP_UART2;
|
|
uart3_device.irq[0] = IRQ_EB11MP_UART3;
|
|
clcd_device.irq[0] = IRQ_EB11MP_CLCD;
|
|
wdog_device.irq[0] = IRQ_EB11MP_WDOG;
|
|
gpio0_device.irq[0] = IRQ_EB11MP_GPIO0;
|
|
gpio1_device.irq[0] = IRQ_EB11MP_GPIO1;
|
|
gpio2_device.irq[0] = IRQ_EB11MP_GPIO2;
|
|
rtc_device.irq[0] = IRQ_EB11MP_RTC;
|
|
sci0_device.irq[0] = IRQ_EB11MP_SCI;
|
|
ssp0_device.irq[0] = IRQ_EB11MP_SSP;
|
|
aaci_device.irq[0] = IRQ_EB11MP_AACI;
|
|
mmc0_device.irq[0] = IRQ_EB11MP_MMCI0A;
|
|
mmc0_device.irq[1] = IRQ_EB11MP_MMCI0B;
|
|
kmi0_device.irq[0] = IRQ_EB11MP_KMI0;
|
|
kmi1_device.irq[0] = IRQ_EB11MP_KMI1;
|
|
|
|
/* platform devices */
|
|
realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH;
|
|
realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH;
|
|
realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB;
|
|
realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB;
|
|
}
|
|
|
|
#ifdef CONFIG_HAVE_ARM_TWD
|
|
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
|
|
REALVIEW_EB11MP_TWD_BASE,
|
|
IRQ_LOCALTIMER);
|
|
|
|
static void __init realview_eb_twd_init(void)
|
|
{
|
|
if (core_tile_eb11mp() || core_tile_a9mp()) {
|
|
int err = twd_local_timer_register(&twd_local_timer);
|
|
if (err)
|
|
pr_err("twd_local_timer_register failed %d\n", err);
|
|
}
|
|
}
|
|
#else
|
|
#define realview_eb_twd_init() do { } while(0)
|
|
#endif
|
|
|
|
static void __init realview_eb_timer_init(void)
|
|
{
|
|
unsigned int timer_irq;
|
|
|
|
timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
|
|
timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
|
|
timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
|
|
timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
|
|
|
|
if (core_tile_eb11mp() || core_tile_a9mp())
|
|
timer_irq = IRQ_EB11MP_TIMER0_1;
|
|
else
|
|
timer_irq = IRQ_EB_TIMER0_1;
|
|
|
|
realview_clk_init(__io_address(REALVIEW_SYS_BASE), false);
|
|
realview_timer_init(timer_irq);
|
|
realview_eb_twd_init();
|
|
}
|
|
|
|
static void realview_eb_restart(enum reboot_mode mode, const char *cmd)
|
|
{
|
|
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
|
|
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
|
|
|
|
/*
|
|
* To reset, we hit the on-board reset register
|
|
* in the system FPGA
|
|
*/
|
|
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
|
|
if (core_tile_eb11mp())
|
|
__raw_writel(0x0008, reset_ctrl);
|
|
dsb();
|
|
}
|
|
|
|
static void __init realview_eb_init(void)
|
|
{
|
|
int i;
|
|
|
|
if (core_tile_eb11mp() || core_tile_a9mp()) {
|
|
realview_eb11mp_fixup();
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/*
|
|
* The PL220 needs to be manually configured as the hardware
|
|
* doesn't report the correct sizes.
|
|
* 1MB (128KB/way), 8-way associativity, event monitor and
|
|
* parity enabled, ignore share bit, no force write allocate
|
|
* Bits: .... ...0 0111 1001 0000 .... .... ....
|
|
*/
|
|
l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
|
|
#endif
|
|
pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
|
|
platform_device_register(&pmu_device);
|
|
}
|
|
|
|
realview_flash_register(&realview_eb_flash_resource, 1);
|
|
platform_device_register(&realview_i2c_device);
|
|
platform_device_register(&char_lcd_device);
|
|
platform_device_register(&realview_leds_device);
|
|
eth_device_register();
|
|
realview_usb_register(realview_eb_isp1761_resources);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
|
|
struct amba_device *d = amba_devs[i];
|
|
amba_device_register(d, &iomem_resource);
|
|
}
|
|
}
|
|
|
|
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
|
|
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
|
|
.atag_offset = 0x100,
|
|
.smp = smp_ops(realview_smp_ops),
|
|
.fixup = realview_fixup,
|
|
.map_io = realview_eb_map_io,
|
|
.init_early = realview_init_early,
|
|
.init_irq = gic_init_irq,
|
|
.init_time = realview_eb_timer_init,
|
|
.init_machine = realview_eb_init,
|
|
#ifdef CONFIG_ZONE_DMA
|
|
.dma_zone_size = SZ_256M,
|
|
#endif
|
|
.restart = realview_eb_restart,
|
|
MACHINE_END
|