forked from Minki/linux
8b8e2ef328
the pandaboard does not use the VUSIM or VAUX1 power regulators on the TWL6030 and are left floating. if the VUSIM and VAUX1 power regulators are initilized, noise on the unloaded regulators generates an overcurrent interrupt causing the system to power down. this patch removes the initialization of the unused power regulators of VUSIM and VAUX1. Signed-off-by: David Anders <x0132446@ti.com> Acked-by: Andy Green <andy.green@linaro.org> Acked-by: Anand Gadiyar <gadiyar@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
545 lines
13 KiB
C
545 lines
13 KiB
C
/*
|
|
* Board support file for OMAP4430 based PandaBoard.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments
|
|
*
|
|
* Author: David Anders <x0132446@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-4430sdp.c
|
|
*
|
|
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/wl12xx.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/omap4-common.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/board.h>
|
|
#include <plat/common.h>
|
|
#include <plat/usb.h>
|
|
#include <plat/mmc.h>
|
|
#include "timer-gp.h"
|
|
|
|
#include "hsmmc.h"
|
|
#include "control.h"
|
|
#include "mux.h"
|
|
|
|
#define GPIO_HUB_POWER 1
|
|
#define GPIO_HUB_NRESET 62
|
|
#define GPIO_WIFI_PMENA 43
|
|
#define GPIO_WIFI_IRQ 53
|
|
|
|
/* wl127x BT, FM, GPS connectivity chip */
|
|
static int wl1271_gpios[] = {46, -1, -1};
|
|
static struct platform_device wl1271_device = {
|
|
.name = "kim",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &wl1271_gpios,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led gpio_leds[] = {
|
|
{
|
|
.name = "pandaboard::status1",
|
|
.default_trigger = "heartbeat",
|
|
.gpio = 7,
|
|
},
|
|
{
|
|
.name = "pandaboard::status2",
|
|
.default_trigger = "mmc0",
|
|
.gpio = 8,
|
|
},
|
|
};
|
|
|
|
static struct gpio_led_platform_data gpio_led_info = {
|
|
.leds = gpio_leds,
|
|
.num_leds = ARRAY_SIZE(gpio_leds),
|
|
};
|
|
|
|
static struct platform_device leds_gpio = {
|
|
.name = "leds-gpio",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &gpio_led_info,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *panda_devices[] __initdata = {
|
|
&leds_gpio,
|
|
&wl1271_device,
|
|
};
|
|
|
|
static void __init omap4_panda_init_early(void)
|
|
{
|
|
omap2_init_common_infrastructure();
|
|
omap2_init_common_devices(NULL, NULL);
|
|
}
|
|
|
|
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
|
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
|
|
.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
|
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
|
.phy_reset = false,
|
|
.reset_gpio_port[0] = -EINVAL,
|
|
.reset_gpio_port[1] = -EINVAL,
|
|
.reset_gpio_port[2] = -EINVAL
|
|
};
|
|
|
|
static void __init omap4_ehci_init(void)
|
|
{
|
|
int ret;
|
|
struct clk *phy_ref_clk;
|
|
|
|
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
|
|
phy_ref_clk = clk_get(NULL, "auxclk3_ck");
|
|
if (IS_ERR(phy_ref_clk)) {
|
|
pr_err("Cannot request auxclk3\n");
|
|
goto error1;
|
|
}
|
|
clk_set_rate(phy_ref_clk, 19200000);
|
|
clk_enable(phy_ref_clk);
|
|
|
|
/* disable the power to the usb hub prior to init */
|
|
ret = gpio_request(GPIO_HUB_POWER, "hub_power");
|
|
if (ret) {
|
|
pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER);
|
|
goto error1;
|
|
}
|
|
gpio_export(GPIO_HUB_POWER, 0);
|
|
gpio_direction_output(GPIO_HUB_POWER, 0);
|
|
gpio_set_value(GPIO_HUB_POWER, 0);
|
|
|
|
/* reset phy+hub */
|
|
ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset");
|
|
if (ret) {
|
|
pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET);
|
|
goto error2;
|
|
}
|
|
gpio_export(GPIO_HUB_NRESET, 0);
|
|
gpio_direction_output(GPIO_HUB_NRESET, 0);
|
|
gpio_set_value(GPIO_HUB_NRESET, 0);
|
|
gpio_set_value(GPIO_HUB_NRESET, 1);
|
|
|
|
usb_ehci_init(&ehci_pdata);
|
|
|
|
/* enable power to hub */
|
|
gpio_set_value(GPIO_HUB_POWER, 1);
|
|
return;
|
|
|
|
error2:
|
|
gpio_free(GPIO_HUB_POWER);
|
|
error1:
|
|
pr_err("Unable to initialize EHCI power/reset\n");
|
|
return;
|
|
|
|
}
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_UTMI,
|
|
.mode = MUSB_OTG,
|
|
.power = 100,
|
|
};
|
|
|
|
static struct twl4030_usb_data omap4_usbphy_data = {
|
|
.phy_init = omap4430_phy_init,
|
|
.phy_exit = omap4430_phy_exit,
|
|
.phy_power = omap4430_phy_power,
|
|
.phy_set_clock = omap4430_phy_set_clk,
|
|
};
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 1,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
|
|
.gpio_wp = -EINVAL,
|
|
.gpio_cd = -EINVAL,
|
|
},
|
|
{
|
|
.name = "wl1271",
|
|
.mmc = 5,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
|
|
.gpio_wp = -EINVAL,
|
|
.gpio_cd = -EINVAL,
|
|
.ocr_mask = MMC_VDD_165_195,
|
|
.nonremovable = true,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
|
|
{
|
|
.supply = "vmmc",
|
|
.dev_name = "omap_hsmmc.0",
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
|
|
.supply = "vmmc",
|
|
.dev_name = "omap_hsmmc.4",
|
|
};
|
|
|
|
static struct regulator_init_data panda_vmmc5 = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = &omap4_panda_vmmc5_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config panda_vwlan = {
|
|
.supply_name = "vwl1271",
|
|
.microvolts = 1800000, /* 1.8V */
|
|
.gpio = GPIO_WIFI_PMENA,
|
|
.startup_delay = 70000, /* 70msec */
|
|
.enable_high = 1,
|
|
.enabled_at_boot = 0,
|
|
.init_data = &panda_vmmc5,
|
|
};
|
|
|
|
static struct platform_device omap_vwlan_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &panda_vwlan,
|
|
},
|
|
};
|
|
|
|
struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
|
|
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
|
|
/* PANDA ref clock is 38.4 MHz */
|
|
.board_ref_clock = 2,
|
|
};
|
|
|
|
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
struct platform_device *pdev = container_of(dev,
|
|
struct platform_device, dev);
|
|
struct omap_mmc_platform_data *pdata = dev->platform_data;
|
|
|
|
if (!pdata) {
|
|
dev_err(dev, "%s: NULL platform data\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
/* Setting MMC1 Card detect Irq */
|
|
if (pdev->id == 0) {
|
|
ret = twl6030_mmc_card_detect_config();
|
|
if (ret)
|
|
dev_err(dev, "%s: Error card detect config(%d)\n",
|
|
__func__, ret);
|
|
else
|
|
pdata->slots[0].card_detect = twl6030_mmc_card_detect;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
|
|
{
|
|
struct omap_mmc_platform_data *pdata;
|
|
|
|
/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
|
|
if (!dev) {
|
|
pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
|
|
return;
|
|
}
|
|
pdata = dev->platform_data;
|
|
|
|
pdata->init = omap4_twl6030_hsmmc_late_init;
|
|
}
|
|
|
|
static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|
{
|
|
struct omap2_hsmmc_info *c;
|
|
|
|
omap2_hsmmc_init(controllers);
|
|
for (c = controllers; c->mmc; c++)
|
|
omap4_twl6030_hsmmc_set_late_init(c->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regulator_init_data omap4_panda_vaux2 = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data omap4_panda_vaux3 = {
|
|
.constraints = {
|
|
.min_uV = 1000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
/* VMMC1 for MMC1 card */
|
|
static struct regulator_init_data omap4_panda_vmmc = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 1,
|
|
.consumer_supplies = omap4_panda_vmmc_supply,
|
|
};
|
|
|
|
static struct regulator_init_data omap4_panda_vpp = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 2500000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data omap4_panda_vana = {
|
|
.constraints = {
|
|
.min_uV = 2100000,
|
|
.max_uV = 2100000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data omap4_panda_vcxio = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data omap4_panda_vdac = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data omap4_panda_vusb = {
|
|
.constraints = {
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct twl4030_platform_data omap4_panda_twldata = {
|
|
.irq_base = TWL6030_IRQ_BASE,
|
|
.irq_end = TWL6030_IRQ_END,
|
|
|
|
/* Regulators */
|
|
.vmmc = &omap4_panda_vmmc,
|
|
.vpp = &omap4_panda_vpp,
|
|
.vana = &omap4_panda_vana,
|
|
.vcxio = &omap4_panda_vcxio,
|
|
.vdac = &omap4_panda_vdac,
|
|
.vusb = &omap4_panda_vusb,
|
|
.vaux2 = &omap4_panda_vaux2,
|
|
.vaux3 = &omap4_panda_vaux3,
|
|
.usb = &omap4_usbphy_data,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("twl6030", 0x48),
|
|
.flags = I2C_CLIENT_WAKE,
|
|
.irq = OMAP44XX_IRQ_SYS_1N,
|
|
.platform_data = &omap4_panda_twldata,
|
|
},
|
|
};
|
|
static int __init omap4_panda_i2c_init(void)
|
|
{
|
|
/*
|
|
* Phoenix Audio IC needs I2C1 to
|
|
* start with 400 KHz or less
|
|
*/
|
|
omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
|
|
ARRAY_SIZE(omap4_panda_i2c_boardinfo));
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
omap_register_i2c_bus(4, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
/* WLAN IRQ - GPIO 53 */
|
|
OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
|
|
/* WLAN POWER ENABLE - GPIO 43 */
|
|
OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
|
|
/* WLAN SDIO: MMC5 CMD */
|
|
OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
/* WLAN SDIO: MMC5 CLK */
|
|
OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
/* WLAN SDIO: MMC5 DAT[0-3] */
|
|
OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
|
|
static struct omap_device_pad serial2_pads[] __initdata = {
|
|
OMAP_MUX_STATIC("uart2_cts.uart2_cts",
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart2_rts.uart2_rts",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart2_rx.uart2_rx",
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart2_tx.uart2_tx",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
};
|
|
|
|
static struct omap_device_pad serial3_pads[] __initdata = {
|
|
OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
|
|
OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
|
|
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
};
|
|
|
|
static struct omap_device_pad serial4_pads[] __initdata = {
|
|
OMAP_MUX_STATIC("uart4_rx.uart4_rx",
|
|
OMAP_PIN_INPUT | OMAP_MUX_MODE0),
|
|
OMAP_MUX_STATIC("uart4_tx.uart4_tx",
|
|
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
|
|
};
|
|
|
|
static struct omap_board_data serial2_data = {
|
|
.id = 1,
|
|
.pads = serial2_pads,
|
|
.pads_cnt = ARRAY_SIZE(serial2_pads),
|
|
};
|
|
|
|
static struct omap_board_data serial3_data = {
|
|
.id = 2,
|
|
.pads = serial3_pads,
|
|
.pads_cnt = ARRAY_SIZE(serial3_pads),
|
|
};
|
|
|
|
static struct omap_board_data serial4_data = {
|
|
.id = 3,
|
|
.pads = serial4_pads,
|
|
.pads_cnt = ARRAY_SIZE(serial4_pads),
|
|
};
|
|
|
|
static inline void board_serial_init(void)
|
|
{
|
|
struct omap_board_data bdata;
|
|
bdata.flags = 0;
|
|
bdata.pads = NULL;
|
|
bdata.pads_cnt = 0;
|
|
bdata.id = 0;
|
|
/* pass dummy data for UART1 */
|
|
omap_serial_init_port(&bdata);
|
|
|
|
omap_serial_init_port(&serial2_data);
|
|
omap_serial_init_port(&serial3_data);
|
|
omap_serial_init_port(&serial4_data);
|
|
}
|
|
#else
|
|
#define board_mux NULL
|
|
|
|
static inline void board_serial_init(void)
|
|
{
|
|
omap_serial_init();
|
|
}
|
|
#endif
|
|
|
|
static void __init omap4_panda_init(void)
|
|
{
|
|
int package = OMAP_PACKAGE_CBS;
|
|
|
|
if (omap_rev() == OMAP4430_REV_ES1_0)
|
|
package = OMAP_PACKAGE_CBL;
|
|
omap4_mux_init(board_mux, package);
|
|
|
|
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
|
|
pr_err("error setting wl12xx data\n");
|
|
|
|
omap4_panda_i2c_init();
|
|
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
|
|
platform_device_register(&omap_vwlan_device);
|
|
board_serial_init();
|
|
omap4_twl6030_hsmmc_init(mmc);
|
|
omap4_ehci_init();
|
|
usb_musb_init(&musb_board_data);
|
|
}
|
|
|
|
static void __init omap4_panda_map_io(void)
|
|
{
|
|
omap2_set_globals_443x();
|
|
omap44xx_map_common_io();
|
|
}
|
|
|
|
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
|
|
/* Maintainer: David Anders - Texas Instruments Inc */
|
|
.boot_params = 0x80000100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap4_panda_map_io,
|
|
.init_early = omap4_panda_init_early,
|
|
.init_irq = gic_init_irq,
|
|
.init_machine = omap4_panda_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|