Bruce Allan 8b802a7e94 e1000e: Cleanup e1000_sw_lcd_config_ich8lan() ... After every reset all ICH/PCH parts call this function which acquires the swflag, performs a workaround on applicable parts and releases the swflag. There is no reason for parts for which this workaround is not applicable to acquire and release the swflag so the function should just return without doing anything for these parts. This also provides for the indentation of most of the function contents to be shifted left cleaning up the code. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2010-05-12 23:31:12 -07:00
..
82571.c	e1000e: increase rx fifo size to 36K on 82574 and 82583	2010-05-05 21:15:31 -07:00
defines.h	e1000e: initialize manageability (IPMI) pass-through in 82574/82583	2010-05-12 23:31:10 -07:00
e1000.h	e1000e: save skb counts in TX to avoid cache misses	2010-05-05 21:11:25 -07:00
es2lan.c	e1000e: provide MAC-family-specific function to set LAN ID	2010-01-13 20:31:57 -08:00
ethtool.c	e1000e: bad state after running ethtool diagnostics with AMT enabled	2010-05-12 23:31:09 -07:00
hw.h	e1000e: initialize manageability (IPMI) pass-through in 82574/82583	2010-05-12 23:31:10 -07:00
ich8lan.c	e1000e: Cleanup e1000_sw_lcd_config_ich8lan()	2010-05-12 23:31:12 -07:00
lib.c	e1000e: Remove EN_MAC_ADDR_FILTER check from enable_mng_pass_thru check	2010-05-12 23:31:11 -07:00
Makefile
netdev.c	e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmit	2010-05-12 23:31:10 -07:00
param.c	e1000e: use static params to save stack space (part 2)	2010-05-12 23:31:09 -07:00
phy.c	e1000e: MDIO slow mode should always be done for 82577	2010-01-13 17:12:46 -08:00