Dmitry Baryshkov 69fc7eed5f [ARM] 5300/1: fixup spitz reset during boot ... Some machines don't have the pullup/down on their reset pin, so configuring the reset generating pin as input makes them reset immediately. Fix that by making reset pin direction configurable. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2008-10-11 09:52:38 +01:00
..
audio.h
bitfield.h
camera.h
colibri.h
corgi.h	[ARM] pxa/corgi: use generic GPIO API for SCOOP GPIOs	2008-09-23 22:04:39 +01:00
debug-macro.S
dma.h
entry-macro.S	[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15	2008-09-01 17:13:26 +01:00
eseries-gpio.h
eseries-irq.h
gpio.h
gumstix.h
hardware.h	Merge branch 'pxa-all' into devel	2008-10-09 21:33:02 +01:00
i2c.h	[ARM] 5278/1: i2c-pxa fast mode support	2008-10-03 15:57:06 +01:00
idp.h
io.h
irda.h
irqs.h	[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15	2008-09-01 17:13:26 +01:00
littleton.h	[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driver	2008-09-23 22:04:38 +01:00
lpd270.h
lubbock.h
magician.h
mainstone.h
memory.h	[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255	2008-10-07 12:05:05 +01:00
mfp-pxa2xx.h
mfp-pxa3xx.h
mfp-pxa25x.h	[ARM] pxa: fix typo in pxa25x MFP definitions	2008-09-26 23:43:20 +01:00
mfp-pxa27x.h
mfp-pxa300.h
mfp-pxa320.h	[ARM] pxa: fix incorrect definitions of SSP3 on pxa320	2008-08-26 17:02:00 +01:00
mfp-pxa930.h
mfp.h	[ARM] pxa: better MFP low power state support for pxa25x/pxa27x	2008-09-26 23:43:20 +01:00
mioa701.h	[ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support.	2008-08-26 17:01:37 +01:00
mmc.h
mtd-xip.h	[ARM] 5191/1: ARM: remove CVS keywords	2008-08-16 20:01:18 +01:00
ohci.h	[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers	2008-10-07 19:12:57 +01:00
palmtx.h
palmz72.h	[ARM] 5239/1: Palm Zire 72 power management support	2008-10-09 15:12:07 +01:00
pcm027.h
pcm990_baseboard.h
pm.h	[ARM] pxa: Allow platforms to override PSPR setting	2008-09-09 16:32:52 +01:00
poodle.h	[ARM] pxa/poodle: prepare scoop for the generic GPIO API	2008-09-23 22:04:38 +01:00
pxa2xx_spi.h
pxa2xx-gpio.h
pxa2xx-regs.h
pxa3xx_nand.h
pxa3xx-regs.h	[ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h	2008-10-07 19:12:59 +01:00
pxa25x-udc.h
pxa27x_keypad.h
pxa27x-udc.h
pxa-regs.h	[ARM] ohci-pxa27x: move OHCI controller specific registers into the driver	2008-10-07 19:12:57 +01:00
pxafb.h	[ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16	2008-08-16 16:39:16 +01:00
regs-lcd.h
regs-ssp.h
reset.h	[ARM] 5300/1: fixup spitz reset during boot	2008-10-11 09:52:38 +01:00
sharpsl.h
spitz.h	[ARM] pxa/akita: use pca953x instead of akita-ioexp	2008-09-23 22:04:40 +01:00
ssp.h	[ARM] 5224/2: PXA SSP: Introduce register accessors	2008-09-09 16:32:52 +01:00
system.h
timex.h
tosa_bt.h
tosa.h
trizeps4.h	[ARM] 5204/1: Trizeps4 SOM update	2008-10-01 22:33:11 +01:00
udc.h
uncompress.h
viper.h	Basic support for the Arcom/Eurotech Viper SBC.	2008-09-09 17:41:46 +02:00
vmalloc.h
zylonite.h