linux/drivers/usb/chipidea/ci.h
Peter Chen e48aa1eb44
usb: chipidea: udc: add software sg list support
The chipidea controller doesn't support short transfer for sg list,
so we still keep setting IOC per TD, otherwise, there will be no interrupt
for short transfer. Each TD has five entries for data buffer, each data
buffer could be non-countinuous 4KB buffer, so it could handle
up to 5 sg buffers one time. The benefit of this patch is avoiding
OOM for low memory system(eg, 256MB) during large USB transfers, see
below for detail. The non-sg handling has not changed.

ufb: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 2 PID: 370 Comm: ufb Not tainted 5.4.3-1.1.0+g54b3750d61fd #1
Hardware name: NXP i.MX8MNano DDR4 EVK board (DT)
Call trace:
 dump_backtrace+0x0/0x140
 show_stack+0x14/0x20
 dump_stack+0xb4/0xf8
 warn_alloc+0xec/0x158
 __alloc_pages_slowpath+0x9cc/0x9f8
 __alloc_pages_nodemask+0x21c/0x280
 alloc_pages_current+0x7c/0xe8
 kmalloc_order+0x1c/0x88
 __kmalloc+0x25c/0x298
 ffs_epfile_io.isra.0+0x20c/0x7d0
 ffs_epfile_read_iter+0xa8/0x188
 new_sync_read+0xe4/0x170
 __vfs_read+0x2c/0x40
 vfs_read+0xc8/0x1a0
 ksys_read+0x68/0xf0
 __arm64_sys_read+0x18/0x20
 el0_svc_common.constprop.0+0x68/0x160
 el0_svc_handler+0x20/0x80
 el0_svc+0x8/0xc
Mem-Info:
active_anon:2856 inactive_anon:5269 isolated_anon:12
 active_file:5238 inactive_file:18803 isolated_file:0
 unevictable:0 dirty:22 writeback:416 unstable:0
 slab_reclaimable:4073 slab_unreclaimable:3408
 mapped:727 shmem:7393 pagetables:37 bounce:0
 free:4104 free_pcp:118 free_cma:0
Node 0 active_anon:11436kB inactive_anon:21076kB active_file:20988kB inactive_file:75216kB unevictable:0kB isolated(ano
Node 0 DMA32 free:16820kB min:1808kB low:2260kB high:2712kB active_anon:11436kB inactive_anon:21076kB active_file:2098B
lowmem_reserve[]: 0 0 0
Node 0 DMA32: 508*4kB (UME) 242*8kB (UME) 730*16kB (UM) 21*32kB (UME) 5*64kB (UME) 2*128kB (M) 0*256kB 0*512kB 0*1024kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB
31455 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap  = 0kB
Total swap = 0kB
65536 pages RAM
0 pages HighMem/MovableOnly
10766 pages reserved
0 pages cma reserved
0 pages hwpoisoned

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-05-06 09:42:35 +08:00

472 lines
12 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* ci.h - common structures, functions, and macros of the ChipIdea driver
*
* Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
*
* Author: David Lopo
*/
#ifndef __DRIVERS_USB_CHIPIDEA_CI_H
#define __DRIVERS_USB_CHIPIDEA_CI_H
#include <linux/list.h>
#include <linux/irqreturn.h>
#include <linux/usb.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg-fsm.h>
#include <linux/usb/otg.h>
#include <linux/usb/role.h>
#include <linux/ulpi/interface.h>
/******************************************************************************
* DEFINE
*****************************************************************************/
#define TD_PAGE_COUNT 5
#define CI_HDRC_PAGE_SIZE 4096ul /* page size for TD's */
#define ENDPT_MAX 32
#define CI_MAX_BUF_SIZE (TD_PAGE_COUNT * CI_HDRC_PAGE_SIZE)
/******************************************************************************
* REGISTERS
*****************************************************************************/
/* Identification Registers */
#define ID_ID 0x0
#define ID_HWGENERAL 0x4
#define ID_HWHOST 0x8
#define ID_HWDEVICE 0xc
#define ID_HWTXBUF 0x10
#define ID_HWRXBUF 0x14
#define ID_SBUSCFG 0x90
/* register indices */
enum ci_hw_regs {
CAP_CAPLENGTH,
CAP_HCCPARAMS,
CAP_DCCPARAMS,
CAP_TESTMODE,
CAP_LAST = CAP_TESTMODE,
OP_USBCMD,
OP_USBSTS,
OP_USBINTR,
OP_DEVICEADDR,
OP_ENDPTLISTADDR,
OP_TTCTRL,
OP_BURSTSIZE,
OP_ULPI_VIEWPORT,
OP_PORTSC,
OP_DEVLC,
OP_OTGSC,
OP_USBMODE,
OP_ENDPTSETUPSTAT,
OP_ENDPTPRIME,
OP_ENDPTFLUSH,
OP_ENDPTSTAT,
OP_ENDPTCOMPLETE,
OP_ENDPTCTRL,
/* endptctrl1..15 follow */
OP_LAST = OP_ENDPTCTRL + ENDPT_MAX / 2,
};
/******************************************************************************
* STRUCTURES
*****************************************************************************/
/**
* struct ci_hw_ep - endpoint representation
* @ep: endpoint structure for gadget drivers
* @dir: endpoint direction (TX/RX)
* @num: endpoint number
* @type: endpoint type
* @name: string description of the endpoint
* @qh: queue head for this endpoint
* @wedge: is the endpoint wedged
* @ci: pointer to the controller
* @lock: pointer to controller's spinlock
* @td_pool: pointer to controller's TD pool
*/
struct ci_hw_ep {
struct usb_ep ep;
u8 dir;
u8 num;
u8 type;
char name[16];
struct {
struct list_head queue;
struct ci_hw_qh *ptr;
dma_addr_t dma;
} qh;
int wedge;
/* global resources */
struct ci_hdrc *ci;
spinlock_t *lock;
struct dma_pool *td_pool;
struct td_node *pending_td;
};
enum ci_role {
CI_ROLE_HOST = 0,
CI_ROLE_GADGET,
CI_ROLE_END,
};
enum ci_revision {
CI_REVISION_1X = 10, /* Revision 1.x */
CI_REVISION_20 = 20, /* Revision 2.0 */
CI_REVISION_21, /* Revision 2.1 */
CI_REVISION_22, /* Revision 2.2 */
CI_REVISION_23, /* Revision 2.3 */
CI_REVISION_24, /* Revision 2.4 */
CI_REVISION_25, /* Revision 2.5 */
CI_REVISION_25_PLUS, /* Revision above than 2.5 */
CI_REVISION_UNKNOWN = 99, /* Unknown Revision */
};
/**
* struct ci_role_driver - host/gadget role driver
* @start: start this role
* @stop: stop this role
* @irq: irq handler for this role
* @name: role name string (host/gadget)
*/
struct ci_role_driver {
int (*start)(struct ci_hdrc *);
void (*stop)(struct ci_hdrc *);
irqreturn_t (*irq)(struct ci_hdrc *);
const char *name;
};
/**
* struct hw_bank - hardware register mapping representation
* @lpm: set if the device is LPM capable
* @phys: physical address of the controller's registers
* @abs: absolute address of the beginning of register window
* @cap: capability registers
* @op: operational registers
* @size: size of the register window
* @regmap: register lookup table
*/
struct hw_bank {
unsigned lpm;
resource_size_t phys;
void __iomem *abs;
void __iomem *cap;
void __iomem *op;
size_t size;
void __iomem *regmap[OP_LAST + 1];
};
/**
* struct ci_hdrc - chipidea device representation
* @dev: pointer to parent device
* @lock: access synchronization
* @hw_bank: hardware register mapping
* @irq: IRQ number
* @roles: array of supported roles for this controller
* @role: current role
* @is_otg: if the device is otg-capable
* @fsm: otg finite state machine
* @otg_fsm_hrtimer: hrtimer for otg fsm timers
* @hr_timeouts: time out list for active otg fsm timers
* @enabled_otg_timer_bits: bits of enabled otg timers
* @next_otg_timer: next nearest enabled timer to be expired
* @work: work for role changing
* @wq: workqueue thread
* @qh_pool: allocation pool for queue heads
* @td_pool: allocation pool for transfer descriptors
* @gadget: device side representation for peripheral controller
* @driver: gadget driver
* @resume_state: save the state of gadget suspend from
* @hw_ep_max: total number of endpoints supported by hardware
* @ci_hw_ep: array of endpoints
* @ep0_dir: ep0 direction
* @ep0out: pointer to ep0 OUT endpoint
* @ep0in: pointer to ep0 IN endpoint
* @status: ep0 status request
* @setaddr: if we should set the address on status completion
* @address: usb address received from the host
* @remote_wakeup: host-enabled remote wakeup
* @suspended: suspended by host
* @test_mode: the selected test mode
* @platdata: platform specific information supplied by parent device
* @vbus_active: is VBUS active
* @ulpi: pointer to ULPI device, if any
* @ulpi_ops: ULPI read/write ops for this device
* @phy: pointer to PHY, if any
* @usb_phy: pointer to USB PHY, if any and if using the USB PHY framework
* @hcd: pointer to usb_hcd for ehci host driver
* @debugfs: root dentry for this controller in debugfs
* @id_event: indicates there is an id event, and handled at ci_otg_work
* @b_sess_valid_event: indicates there is a vbus event, and handled
* at ci_otg_work
* @imx28_write_fix: Freescale imx28 needs swp instruction for writing
* @supports_runtime_pm: if runtime pm is supported
* @in_lpm: if the core in low power mode
* @wakeup_int: if wakeup interrupt occur
* @rev: The revision number for controller
*/
struct ci_hdrc {
struct device *dev;
spinlock_t lock;
struct hw_bank hw_bank;
int irq;
struct ci_role_driver *roles[CI_ROLE_END];
enum ci_role role;
bool is_otg;
struct usb_otg otg;
struct otg_fsm fsm;
struct hrtimer otg_fsm_hrtimer;
ktime_t hr_timeouts[NUM_OTG_FSM_TIMERS];
unsigned enabled_otg_timer_bits;
enum otg_fsm_timer next_otg_timer;
struct usb_role_switch *role_switch;
struct work_struct work;
struct workqueue_struct *wq;
struct dma_pool *qh_pool;
struct dma_pool *td_pool;
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
enum usb_device_state resume_state;
unsigned hw_ep_max;
struct ci_hw_ep ci_hw_ep[ENDPT_MAX];
u32 ep0_dir;
struct ci_hw_ep *ep0out, *ep0in;
struct usb_request *status;
bool setaddr;
u8 address;
u8 remote_wakeup;
u8 suspended;
u8 test_mode;
struct ci_hdrc_platform_data *platdata;
int vbus_active;
struct ulpi *ulpi;
struct ulpi_ops ulpi_ops;
struct phy *phy;
/* old usb_phy interface */
struct usb_phy *usb_phy;
struct usb_hcd *hcd;
struct dentry *debugfs;
bool id_event;
bool b_sess_valid_event;
bool imx28_write_fix;
bool supports_runtime_pm;
bool in_lpm;
bool wakeup_int;
enum ci_revision rev;
};
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
{
BUG_ON(ci->role >= CI_ROLE_END || !ci->roles[ci->role]);
return ci->roles[ci->role];
}
static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
{
int ret;
if (role >= CI_ROLE_END)
return -EINVAL;
if (!ci->roles[role])
return -ENXIO;
ret = ci->roles[role]->start(ci);
if (!ret)
ci->role = role;
return ret;
}
static inline void ci_role_stop(struct ci_hdrc *ci)
{
enum ci_role role = ci->role;
if (role == CI_ROLE_END)
return;
ci->role = CI_ROLE_END;
ci->roles[role]->stop(ci);
}
static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
{
if (ci->role == CI_ROLE_HOST)
return USB_ROLE_HOST;
else if (ci->role == CI_ROLE_GADGET && ci->vbus_active)
return USB_ROLE_DEVICE;
else
return USB_ROLE_NONE;
}
static inline enum ci_role usb_role_to_ci_role(enum usb_role role)
{
if (role == USB_ROLE_HOST)
return CI_ROLE_HOST;
else if (role == USB_ROLE_DEVICE)
return CI_ROLE_GADGET;
else
return CI_ROLE_END;
}
/**
* hw_read_id_reg: reads from a identification register
* @ci: the controller
* @offset: offset from the beginning of identification registers region
* @mask: bitfield mask
*
* This function returns register contents
*/
static inline u32 hw_read_id_reg(struct ci_hdrc *ci, u32 offset, u32 mask)
{
return ioread32(ci->hw_bank.abs + offset) & mask;
}
/**
* hw_write_id_reg: writes to a identification register
* @ci: the controller
* @offset: offset from the beginning of identification registers region
* @mask: bitfield mask
* @data: new value
*/
static inline void hw_write_id_reg(struct ci_hdrc *ci, u32 offset,
u32 mask, u32 data)
{
if (~mask)
data = (ioread32(ci->hw_bank.abs + offset) & ~mask)
| (data & mask);
iowrite32(data, ci->hw_bank.abs + offset);
}
/**
* hw_read: reads from a hw register
* @ci: the controller
* @reg: register index
* @mask: bitfield mask
*
* This function returns register contents
*/
static inline u32 hw_read(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask)
{
return ioread32(ci->hw_bank.regmap[reg]) & mask;
}
#ifdef CONFIG_SOC_IMX28
static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
{
__asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr));
}
#else
static inline void imx28_ci_writel(u32 val, volatile void __iomem *addr)
{
}
#endif
static inline void __hw_write(struct ci_hdrc *ci, u32 val,
void __iomem *addr)
{
if (ci->imx28_write_fix)
imx28_ci_writel(val, addr);
else
iowrite32(val, addr);
}
/**
* hw_write: writes to a hw register
* @ci: the controller
* @reg: register index
* @mask: bitfield mask
* @data: new value
*/
static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
u32 mask, u32 data)
{
if (~mask)
data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
| (data & mask);
__hw_write(ci, data, ci->hw_bank.regmap[reg]);
}
/**
* hw_test_and_clear: tests & clears a hw register
* @ci: the controller
* @reg: register index
* @mask: bitfield mask
*
* This function returns register contents
*/
static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
u32 mask)
{
u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
__hw_write(ci, val, ci->hw_bank.regmap[reg]);
return val;
}
/**
* hw_test_and_write: tests & writes a hw register
* @ci: the controller
* @reg: register index
* @mask: bitfield mask
* @data: new value
*
* This function returns register contents
*/
static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
u32 mask, u32 data)
{
u32 val = hw_read(ci, reg, ~0);
hw_write(ci, reg, mask, data);
return (val & mask) >> __ffs(mask);
}
/**
* ci_otg_is_fsm_mode: runtime check if otg controller
* is in otg fsm mode.
*
* @ci: chipidea device
*/
static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
{
#ifdef CONFIG_USB_OTG_FSM
struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps;
return ci->is_otg && ci->roles[CI_ROLE_HOST] &&
ci->roles[CI_ROLE_GADGET] && (otg_caps->srp_support ||
otg_caps->hnp_support || otg_caps->adp_support);
#else
return false;
#endif
}
int ci_ulpi_init(struct ci_hdrc *ci);
void ci_ulpi_exit(struct ci_hdrc *ci);
int ci_ulpi_resume(struct ci_hdrc *ci);
u32 hw_read_intr_enable(struct ci_hdrc *ci);
u32 hw_read_intr_status(struct ci_hdrc *ci);
int hw_device_reset(struct ci_hdrc *ci);
int hw_port_test_set(struct ci_hdrc *ci, u8 mode);
u8 hw_port_test_get(struct ci_hdrc *ci);
void hw_phymode_configure(struct ci_hdrc *ci);
void ci_platform_configure(struct ci_hdrc *ci);
void dbg_create_files(struct ci_hdrc *ci);
void dbg_remove_files(struct ci_hdrc *ci);
#endif /* __DRIVERS_USB_CHIPIDEA_CI_H */