forked from Minki/linux
918d98db8c
Add a binding for the OMAP4/5 wake-up generator, which acts as an interrupt controller feeding into the GIC. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088629-15377-7-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
34 lines
1.2 KiB
Plaintext
34 lines
1.2 KiB
Plaintext
TI OMAP4 Wake-up Generator
|
|
|
|
All TI OMAP4/5 (and their derivatives) an interrupt controller that
|
|
routes interrupts to the GIC, and also serves as a wakeup source. It
|
|
is also referred to as "WUGEN-MPU", hence the name of the binding.
|
|
|
|
Reguired properties:
|
|
|
|
- compatible : should contain at least "ti,omap4-wugen-mpu" or
|
|
"ti,omap5-wugen-mpu"
|
|
- reg : Specifies base physical address and size of the registers.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 3.
|
|
- interrupt-parent : a phandle to the GIC these interrupts are routed
|
|
to.
|
|
|
|
Notes:
|
|
|
|
- Because this HW ultimately routes interrupts to the GIC, the
|
|
interrupt specifier must be that of the GIC.
|
|
- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
|
|
are explicitly forbiden.
|
|
|
|
Example:
|
|
|
|
wakeupgen: interrupt-controller@48281000 {
|
|
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x48281000 0x1000>;
|
|
interrupt-parent = <&gic>;
|
|
};
|