forked from Minki/linux
899199292b
This adds a quirk for SPCC 256GB NVMe 1.3 drive which fixes timeouts and I/O errors due to the fact that the controller does not properly handle the Write Zeroes command: [ 2745.659527] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 5.10.6-BET #1 [ 2745.659528] Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 3001 12/04/2020 [ 2776.138874] nvme nvme1: I/O 414 QID 3 timeout, aborting [ 2776.138886] nvme nvme1: I/O 415 QID 3 timeout, aborting [ 2776.138891] nvme nvme1: I/O 416 QID 3 timeout, aborting [ 2776.138895] nvme nvme1: I/O 417 QID 3 timeout, aborting [ 2776.138912] nvme nvme1: Abort status: 0x0 [ 2776.138921] nvme nvme1: I/O 428 QID 3 timeout, aborting [ 2776.138922] nvme nvme1: Abort status: 0x0 [ 2776.138925] nvme nvme1: Abort status: 0x0 [ 2776.138974] nvme nvme1: Abort status: 0x0 [ 2776.138977] nvme nvme1: Abort status: 0x0 [ 2806.346792] nvme nvme1: I/O 414 QID 3 timeout, reset controller [ 2806.363566] nvme nvme1: 15/0/0 default/read/poll queues [ 2836.554298] nvme nvme1: I/O 415 QID 3 timeout, disable controller [ 2836.672064] blk_update_request: I/O error, dev nvme1n1, sector 16350 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672072] blk_update_request: I/O error, dev nvme1n1, sector 16093 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672074] blk_update_request: I/O error, dev nvme1n1, sector 15836 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672076] blk_update_request: I/O error, dev nvme1n1, sector 15579 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672078] blk_update_request: I/O error, dev nvme1n1, sector 15322 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672080] blk_update_request: I/O error, dev nvme1n1, sector 15065 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672082] blk_update_request: I/O error, dev nvme1n1, sector 14808 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672083] blk_update_request: I/O error, dev nvme1n1, sector 14551 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672085] blk_update_request: I/O error, dev nvme1n1, sector 14294 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672087] blk_update_request: I/O error, dev nvme1n1, sector 14037 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0 [ 2836.672121] nvme nvme1: failed to mark controller live state [ 2836.672123] nvme nvme1: Removing after probe failure status: -19 [ 2836.689016] Aborting journal on device dm-0-8. [ 2836.689024] Buffer I/O error on dev dm-0, logical block 25198592, lost sync page write [ 2836.689027] JBD2: Error -5 detected when updating journal superblock for dm-0-8. Reported-by: Bradley Chapman <chapman6235@comcast.net> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Bradley Chapman <chapman6235@comcast.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
---|---|---|
.. | ||
accessibility | ||
acpi | ||
amba | ||
android | ||
ata | ||
atm | ||
auxdisplay | ||
base | ||
bcma | ||
block | ||
bluetooth | ||
bus | ||
cdrom | ||
char | ||
clk | ||
clocksource | ||
connector | ||
counter | ||
cpufreq | ||
cpuidle | ||
crypto | ||
dax | ||
dca | ||
devfreq | ||
dio | ||
dma | ||
dma-buf | ||
edac | ||
eisa | ||
extcon | ||
firewire | ||
firmware | ||
fpga | ||
fsi | ||
gnss | ||
gpio | ||
gpu | ||
greybus | ||
hid | ||
hsi | ||
hv | ||
hwmon | ||
hwspinlock | ||
hwtracing | ||
i2c | ||
i3c | ||
ide | ||
idle | ||
iio | ||
infiniband | ||
input | ||
interconnect | ||
iommu | ||
ipack | ||
irqchip | ||
isdn | ||
leds | ||
lightnvm | ||
macintosh | ||
mailbox | ||
mcb | ||
md | ||
media | ||
memory | ||
memstick | ||
message | ||
mfd | ||
misc | ||
mmc | ||
most | ||
mtd | ||
mux | ||
net | ||
nfc | ||
ntb | ||
nubus | ||
nvdimm | ||
nvme | ||
nvmem | ||
of | ||
opp | ||
oprofile | ||
parisc | ||
parport | ||
pci | ||
pcmcia | ||
perf | ||
phy | ||
pinctrl | ||
platform | ||
pnp | ||
power | ||
powercap | ||
pps | ||
ps3 | ||
ptp | ||
pwm | ||
rapidio | ||
ras | ||
regulator | ||
remoteproc | ||
reset | ||
rpmsg | ||
rtc | ||
s390 | ||
sbus | ||
scsi | ||
sfi | ||
sh | ||
siox | ||
slimbus | ||
soc | ||
soundwire | ||
spi | ||
spmi | ||
ssb | ||
staging | ||
target | ||
tc | ||
tee | ||
thermal | ||
thunderbolt | ||
tty | ||
uio | ||
usb | ||
vdpa | ||
vfio | ||
vhost | ||
video | ||
virt | ||
virtio | ||
visorbus | ||
vlynq | ||
vme | ||
w1 | ||
watchdog | ||
xen | ||
zorro | ||
Kconfig | ||
Makefile |