leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8921d4cab9
linux/drivers/net/wireless/iwlwifi/iwl-core.h
Wey-Yi Guy 317d09f769 iwlagn: add "echo" test when command queue stuck 
When detect command queue stuck, instead of reload the firmware
do the "echo" test to make sure it is really stuck before reload

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-14 14:48:09 -04:00

388 lines
15 KiB
C
Raw Blame History

/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
#ifndef __iwl_core_h__
#define __iwl_core_h__
#include "iwl-dev.h"
/************************
* forward declarations *
************************/
struct iwl_host_cmd;
struct iwl_cmd;
#define TIME_UNIT 1024
struct iwl_lib_ops {
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
/* setup BT Rx handler */
void (*bt_rx_handler_setup)(struct iwl_priv *priv);
/* setup BT related deferred work */
void (*bt_setup_deferred_work)(struct iwl_priv *priv);
/* cancel deferred work */
void (*cancel_deferred_work)(struct iwl_priv *priv);
int (*set_channel_switch)(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch);
/* device specific configuration */
void (*nic_config)(struct iwl_priv *priv);
/* eeprom operations (as defined in iwl-eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
/* temperature */
void (*temperature)(struct iwl_priv *priv);
};
/*
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
* @led_compensation: compensate on the led on/off time per HW according
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
* @chain_noise_num_beacons: number of beacons used to compute chain noise
* @adv_thermal_throttle: support advance thermal throttle
* @support_ct_kill_exit: support ct kill exit condition
* @support_wimax_coexist: support wimax/wifi co-exist
* @plcp_delta_threshold: plcp error rate threshold used to trigger
* radio tuning when there is a high receiving plcp error rate
* @chain_noise_scale: default chain noise scale used for gain computation
* @wd_timeout: TX queues watchdog timeout
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadhow register bit
* @no_idle_support: do not support idle mode
* @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
*/
struct iwl_base_params {
int eeprom_size;
int num_of_queues; /* def: HW dependent */
int num_of_ampdu_queues;/* def: HW dependent */
/* for iwl_apm_init() */
u32 pll_cfg_val;
const u16 max_ll_items;
const bool shadow_ram_support;
u16 led_compensation;
bool adv_thermal_throttle;
bool support_ct_kill_exit;
const bool support_wimax_coexist;
u8 plcp_delta_threshold;
s32 chain_noise_scale;
unsigned int wd_timeout;
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool no_idle_support;
const bool hd_v2;
};
/*
* @advanced_bt_coexist: support advanced bt coexist
* @bt_init_traffic_load: specify initial bt traffic load
* @bt_prio_boost: default bt priority boost value
* @agg_time_limit: maximum number of uSec in aggregation
* @ampdu_factor: Maximum A-MPDU length factor
* @ampdu_density: Minimum A-MPDU spacing
* @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
*/
struct iwl_bt_params {
bool advanced_bt_coexist;
u8 bt_init_traffic_load;
u8 bt_prio_boost;
u16 agg_time_limit;
u8 ampdu_factor;
u8 ampdu_density;
bool bt_sco_disable;
bool bt_session_2;
};
/*
* @use_rts_for_aggregation: use rts/cts protection for HT traffic
*/
struct iwl_ht_params {
const bool ht_greenfield_support; /* if used set to true */
bool use_rts_for_aggregation;
enum ieee80211_smps_mode smps_mode;
};
/**
* struct iwl_cfg
* @name: Offical name of the device
* @fw_name_pre: Firmware filename prefix. The api version and extension
* (.ucode) will be added to filename before loading from disk. The
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_ok: oldest version of the uCode API that is OK to load
* without a warning, for use in transitions
* @ucode_api_min: Lowest version of uCode API supported by driver.
* @valid_tx_ant: valid transmit antenna
* @valid_rx_ant: valid receive antenna
* @sku: sku information from EEPROM
* @eeprom_ver: EEPROM version
* @eeprom_calib_ver: EEPROM calibration version
* @lib: pointer to the lib ops
* @additional_nic_config: additional nic configuration
* @base_params: pointer to basic parameters
* @ht_params: point to ht patameters
* @bt_params: pointer to bt parameters
* @pa_type: used by 6000 series only to identify the type of Power Amplifier
* @need_dc_calib: need to perform init dc calibration
* @need_temp_offset_calib: need to perform temperature offset calibration
* @scan_antennas: available antenna for scan operation
* @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
* @adv_pm: advance power management
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @iq_invert: I/Q inversion
* @temp_offset_v2: support v2 of temperature offset calibration
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
* highest and @ucode_api_min the lowest). Firmware will only be loaded if
* it has a supported API version.
*
* The ideal usage of this infrastructure is to treat a new ucode API
* release as a new hardware revision.
*/
struct iwl_cfg {
/* params specific to an individual device within a device family */
const char *name;
const char *fw_name_pre;
const unsigned int ucode_api_max;
const unsigned int ucode_api_ok;
const unsigned int ucode_api_min;
u8 valid_tx_ant;
u8 valid_rx_ant;
u16 sku;
u16 eeprom_ver;
u16 eeprom_calib_ver;
const struct iwl_lib_ops *lib;
void (*additional_nic_config)(struct iwl_priv *priv);
/* params not likely to change within a device family */
struct iwl_base_params *base_params;
/* params likely to change within a device family */
struct iwl_ht_params *ht_params;
struct iwl_bt_params *bt_params;
enum iwl_pa_type pa_type; /* if used set to IWL_PA_SYSTEM */
const bool need_dc_calib; /* if used set to true */
const bool need_temp_offset_calib; /* if used set to true */
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
enum iwl_led_mode led_mode;
const bool adv_pm;
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
const bool iq_invert;
const bool temp_offset_v2;
};
/***************************
* L i b *
***************************/
int iwl_mac_conf_tx(struct ieee80211_hw *hw,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params);
int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
int hw_decrypt);
int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
struct iwl_rxon_context *ctx);
void iwl_set_flags_for_band(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
enum ieee80211_band band,
struct ieee80211_vif *vif);
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
enum ieee80211_band band);
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
struct ieee80211_sta_ht_cap *ht_cap);
void iwl_connection_init_rx_config(struct iwl_priv *priv,
struct iwl_rxon_context *ctx);
void iwl_set_rate(struct iwl_priv *priv);
int iwl_mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
void iwl_mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
int iwl_mac_change_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum nl80211_iftype newtype, bool newp2p);
int iwl_cmd_echo_test(struct iwl_priv *priv);
#ifdef CONFIG_IWLWIFI_DEBUGFS
int iwl_alloc_traffic_mem(struct iwl_priv *priv);
void iwl_free_traffic_mem(struct iwl_priv *priv);
void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header);
void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header);
const char *get_mgmt_string(int cmd);
const char *get_ctrl_string(int cmd);
void iwl_clear_traffic_stats(struct iwl_priv *priv);
void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc,
u16 len);
#else
static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv)
{
return 0;
}
static inline void iwl_free_traffic_mem(struct iwl_priv *priv)
{
}
static inline void iwl_reset_traffic_log(struct iwl_priv *priv)
{
}
static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
{
}
static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
{
}
static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx,
__le16 fc, u16 len)
{
}
#endif
/*****************************************************
* RX
******************************************************/
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
void iwl_setup_watchdog(struct iwl_priv *priv);
/*****************************************************
* TX power
****************************************************/
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
/*******************************************************************************
* Scanning
******************************************************************************/
void iwl_init_scan_params(struct iwl_priv *priv);
int iwl_scan_cancel(struct iwl_priv *priv);
void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
void iwl_force_scan_end(struct iwl_priv *priv);
int iwl_mac_hw_scan(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_scan_request *req);
void iwl_internal_short_hw_scan(struct iwl_priv *priv);
int iwl_force_reset(struct iwl_priv *priv, int mode, bool external);
u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
const u8 *ta, const u8 *ie, int ie_len, int left);
void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
void iwl_cancel_scan_deferred_work(struct iwl_priv *priv);
int __must_check iwl_scan_initiate(struct iwl_priv *priv,
struct ieee80211_vif *vif,
enum iwl_scan_type scan_type,
enum ieee80211_band band);
/* For faster active scanning, scan will move to the next channel if fewer than
* PLCP_QUIET_THRESH packets are heard on this channel within
* ACTIVE_QUIET_TIME after sending probe request. This shortens the dwell
* time if it's a quiet channel (nothing responded to our probe, and there's
* no other traffic).
* Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
#define IWL_ACTIVE_QUIET_TIME cpu_to_le16(10) /* msec */
#define IWL_PLCP_QUIET_THRESH cpu_to_le16(1) /* packets */
#define IWL_SCAN_CHECK_WATCHDOG (HZ * 7)
/*****************************************************
* S e n d i n g H o s t C o m m a n d s *
*****************************************************/
void iwl_bg_watchdog(unsigned long data);
u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval);
__le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
u32 addon, u32 beacon_interval);
/*****************************************************
* GEOS
******************************************************/
int iwl_init_geos(struct iwl_priv *priv);
void iwl_free_geos(struct iwl_priv *priv);
extern void iwl_send_bt_config(struct iwl_priv *priv);
extern int iwl_send_statistics_request(struct iwl_priv *priv,
u8 flags, bool clear);
int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
struct iwl_priv *priv, enum ieee80211_band band)
{
return priv->hw->wiphy->bands[band];
}
static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv)
{
return priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist;
}
extern bool bt_siso_mode;
#endif /* __iwl_core_h__ */
Reference in New Issue View Git Blame Copy Permalink