forked from Minki/linux
2ef7d5f342
The compatible string "simple-bus" is well defined in ePAPR, while I see no documentation for the "arm,amba-bus" arnywhere in ePAPR or Documentation/devicetree/. DT is also used by other projects than Linux kernel. It is not a good idea to rely on such an unofficial binding. This commit - replaces "arm,amba-bus" with "simple-bus" - drops "arm,amba-bus" where it is used along with "simple-bus" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
828 lines
20 KiB
Plaintext
828 lines
20 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
|
|
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
|
|
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
/ {
|
|
model = "Qualcomm APQ8064";
|
|
compatible = "qcom,apq8064";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
smem_region: smem@80000000 {
|
|
reg = <0x80000000 0x200000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
cpu@2 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
cpu@3 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
|
|
idle-states {
|
|
CPU_SPC: spc {
|
|
compatible = "qcom,idle-state-spc",
|
|
"arm,idle-state";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <900>;
|
|
min-residency-us = <3000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <1 10 0x304>;
|
|
};
|
|
|
|
clocks {
|
|
cxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
pxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
sfpb_mutex: hwmutex {
|
|
compatible = "qcom,sfpb-mutex";
|
|
syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
memory-region = <&smem_region>;
|
|
|
|
hwlocks = <&sfpb_mutex 3>;
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
tlmm_pinmux: pinctrl@800000 {
|
|
compatible = "qcom,apq8064-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ps_hold>;
|
|
};
|
|
|
|
sfpb_wrapper_mutex: syscon@1200000 {
|
|
compatible = "syscon";
|
|
reg = <0x01200000 0x8000>;
|
|
};
|
|
|
|
intc: interrupt-controller@2000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x02000000 0x1000>,
|
|
<0x02002000 0x1000>;
|
|
};
|
|
|
|
timer@200a000 {
|
|
compatible = "qcom,kpss-timer", "qcom,msm-timer";
|
|
interrupts = <1 1 0x301>,
|
|
<1 2 0x301>,
|
|
<1 3 0x301>;
|
|
reg = <0x0200a000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x80000>;
|
|
};
|
|
|
|
acc0: clock-controller@2088000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@2098000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@20a8000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@20b8000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
saw0: power-controller@2089000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw1: power-controller@2099000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw2: power-controller@20a9000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw3: power-controller@20b9000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
gsbi1: gsbi@12440000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <1>;
|
|
reg = <0x12440000 0x100>;
|
|
clocks = <&gcc GSBI1_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi1_i2c: i2c@12460000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x12460000 0x1000>;
|
|
interrupts = <0 194 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
};
|
|
|
|
gsbi2: gsbi@12480000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <2>;
|
|
reg = <0x12480000 0x100>;
|
|
clocks = <&gcc GSBI2_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi2_i2c: i2c@124a0000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x124a0000 0x1000>;
|
|
pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
interrupts = <0 196 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi3: gsbi@16200000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <3>;
|
|
reg = <0x16200000 0x100>;
|
|
clocks = <&gcc GSBI3_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
gsbi3_i2c: i2c@16280000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16280000 0x1000>;
|
|
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI3_QUP_CLK>,
|
|
<&gcc GSBI3_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi4: gsbi@16300000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <4>;
|
|
reg = <0x16300000 0x03>;
|
|
clocks = <&gcc GSBI4_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gsbi4_i2c: i2c@16380000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16380000 0x1000>;
|
|
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI4_QUP_CLK>,
|
|
<&gcc GSBI4_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
};
|
|
};
|
|
|
|
gsbi5: gsbi@1a200000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <5>;
|
|
reg = <0x1a200000 0x03>;
|
|
clocks = <&gcc GSBI5_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gsbi5_serial: serial@1a240000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x1a240000 0x100>,
|
|
<0x1a200000 0x03>;
|
|
interrupts = <0 154 0x0>;
|
|
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi5_spi: spi@1a280000 {
|
|
compatible = "qcom,spi-qup-v1.1.1";
|
|
reg = <0x1a280000 0x1000>;
|
|
interrupts = <0 155 0>;
|
|
pinctrl-0 = <&spi5_default &spi5_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi6: gsbi@16500000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <6>;
|
|
reg = <0x16500000 0x03>;
|
|
clocks = <&gcc GSBI6_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gsbi6_serial: serial@16540000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16540000 0x100>,
|
|
<0x16500000 0x03>;
|
|
interrupts = <0 156 0x0>;
|
|
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi6_i2c: i2c@16580000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16580000 0x1000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI6_QUP_CLK>,
|
|
<&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
};
|
|
};
|
|
|
|
gsbi7: gsbi@16600000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <7>;
|
|
reg = <0x16600000 0x100>;
|
|
clocks = <&gcc GSBI7_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi7_serial: serial@16640000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16640000 0x1000>,
|
|
<0x16600000 0x1000>;
|
|
interrupts = <0 158 0x0>;
|
|
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
rng@1a500000 {
|
|
compatible = "qcom,prng";
|
|
reg = <0x1a500000 0x200>;
|
|
clocks = <&gcc PRNG_CLK>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x00500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pmicintc: pmic@0 {
|
|
compatible = "qcom,pm8921";
|
|
interrupt-parent = <&tlmm_pinmux>;
|
|
interrupts = <74 8>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8921_gpio: gpio@150 {
|
|
|
|
compatible = "qcom,pm8921-gpio",
|
|
"qcom,ssbi-gpio";
|
|
reg = <0x150>;
|
|
interrupts = <192 1>, <193 1>, <194 1>,
|
|
<195 1>, <196 1>, <197 1>,
|
|
<198 1>, <199 1>, <200 1>,
|
|
<201 1>, <202 1>, <203 1>,
|
|
<204 1>, <205 1>, <206 1>,
|
|
<207 1>, <208 1>, <209 1>,
|
|
<210 1>, <211 1>, <212 1>,
|
|
<213 1>, <214 1>, <215 1>,
|
|
<216 1>, <217 1>, <218 1>,
|
|
<219 1>, <220 1>, <221 1>,
|
|
<222 1>, <223 1>, <224 1>,
|
|
<225 1>, <226 1>, <227 1>,
|
|
<228 1>, <229 1>, <230 1>,
|
|
<231 1>, <232 1>, <233 1>,
|
|
<234 1>, <235 1>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
pm8921_mpps: mpps@50 {
|
|
compatible = "qcom,pm8921-mpp",
|
|
"qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts =
|
|
<128 1>, <129 1>, <130 1>, <131 1>,
|
|
<132 1>, <133 1>, <134 1>, <135 1>,
|
|
<136 1>, <137 1>, <138 1>, <139 1>;
|
|
};
|
|
|
|
rtc@11d {
|
|
compatible = "qcom,pm8921-rtc";
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <39 1>;
|
|
reg = <0x11d>;
|
|
allow-set-time;
|
|
};
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8921-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-apq8064";
|
|
reg = <0x00900000 0x4000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
lcc: clock-controller@28000000 {
|
|
compatible = "qcom,lcc-apq8064";
|
|
reg = <0x28000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
mmcc: clock-controller@4000000 {
|
|
compatible = "qcom,mmcc-apq8064";
|
|
reg = <0x4000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
l2cc: clock-controller@2011000 {
|
|
compatible = "syscon";
|
|
reg = <0x2011000 0x1000>;
|
|
};
|
|
|
|
rpm@108000 {
|
|
compatible = "qcom,rpm-apq8064";
|
|
reg = <0x108000 0x1000>;
|
|
qcom,ipc = <&l2cc 0x8 2>;
|
|
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ack", "err", "wakeup";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "qcom,rpm-pm8921-regulators";
|
|
|
|
pm8921_s1: s1 {};
|
|
pm8921_s2: s2 {};
|
|
pm8921_s3: s3 {};
|
|
pm8921_s4: s4 {};
|
|
pm8921_s7: s7 {};
|
|
pm8921_s8: s8 {};
|
|
|
|
pm8921_l1: l1 {};
|
|
pm8921_l2: l2 {};
|
|
pm8921_l3: l3 {};
|
|
pm8921_l4: l4 {};
|
|
pm8921_l5: l5 {};
|
|
pm8921_l6: l6 {};
|
|
pm8921_l7: l7 {};
|
|
pm8921_l8: l8 {};
|
|
pm8921_l9: l9 {};
|
|
pm8921_l10: l10 {};
|
|
pm8921_l11: l11 {};
|
|
pm8921_l12: l12 {};
|
|
pm8921_l14: l14 {};
|
|
pm8921_l15: l15 {};
|
|
pm8921_l16: l16 {};
|
|
pm8921_l17: l17 {};
|
|
pm8921_l18: l18 {};
|
|
pm8921_l21: l21 {};
|
|
pm8921_l22: l22 {};
|
|
pm8921_l23: l23 {};
|
|
pm8921_l24: l24 {};
|
|
pm8921_l25: l25 {};
|
|
pm8921_l26: l26 {};
|
|
pm8921_l27: l27 {};
|
|
pm8921_l28: l28 {};
|
|
pm8921_l29: l29 {};
|
|
|
|
pm8921_lvs1: lvs1 {};
|
|
pm8921_lvs2: lvs2 {};
|
|
pm8921_lvs3: lvs3 {};
|
|
pm8921_lvs4: lvs4 {};
|
|
pm8921_lvs5: lvs5 {};
|
|
pm8921_lvs6: lvs6 {};
|
|
pm8921_lvs7: lvs7 {};
|
|
|
|
pm8921_usb_switch: usb-switch {};
|
|
|
|
pm8921_hdmi_switch: hdmi-switch {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pm8921_ncp: ncp {};
|
|
};
|
|
};
|
|
|
|
usb1_phy: phy@12500000 {
|
|
compatible = "qcom,usb-otg-ci";
|
|
reg = <0x12500000 0x400>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
dr_mode = "host";
|
|
|
|
clocks = <&gcc USB_HS1_XCVR_CLK>,
|
|
<&gcc USB_HS1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
|
|
resets = <&gcc USB_HS1_RESET>;
|
|
reset-names = "link";
|
|
};
|
|
|
|
usb3_phy: phy@12520000 {
|
|
compatible = "qcom,usb-otg-ci";
|
|
reg = <0x12520000 0x400>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
dr_mode = "host";
|
|
|
|
clocks = <&gcc USB_HS3_XCVR_CLK>,
|
|
<&gcc USB_HS3_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
|
|
resets = <&gcc USB_HS3_RESET>;
|
|
reset-names = "link";
|
|
};
|
|
|
|
usb4_phy: phy@12530000 {
|
|
compatible = "qcom,usb-otg-ci";
|
|
reg = <0x12530000 0x400>;
|
|
interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
dr_mode = "host";
|
|
|
|
clocks = <&gcc USB_HS4_XCVR_CLK>,
|
|
<&gcc USB_HS4_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
|
|
resets = <&gcc USB_HS4_RESET>;
|
|
reset-names = "link";
|
|
};
|
|
|
|
gadget1: gadget@12500000 {
|
|
compatible = "qcom,ci-hdrc";
|
|
reg = <0x12500000 0x400>;
|
|
status = "disabled";
|
|
dr_mode = "peripheral";
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
|
|
usb-phy = <&usb1_phy>;
|
|
};
|
|
|
|
usb1: usb@12500000 {
|
|
compatible = "qcom,ehci-host";
|
|
reg = <0x12500000 0x400>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
usb-phy = <&usb1_phy>;
|
|
};
|
|
|
|
usb3: usb@12520000 {
|
|
compatible = "qcom,ehci-host";
|
|
reg = <0x12520000 0x400>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
usb-phy = <&usb3_phy>;
|
|
};
|
|
|
|
usb4: usb@12530000 {
|
|
compatible = "qcom,ehci-host";
|
|
reg = <0x12530000 0x400>;
|
|
interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
|
|
status = "disabled";
|
|
usb-phy = <&usb4_phy>;
|
|
};
|
|
|
|
sata_phy0: phy@1b400000 {
|
|
compatible = "qcom,apq8064-sata-phy";
|
|
status = "disabled";
|
|
reg = <0x1b400000 0x200>;
|
|
reg-names = "phy_mem";
|
|
clocks = <&gcc SATA_PHY_CFG_CLK>;
|
|
clock-names = "cfg";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
sata0: sata@29000000 {
|
|
compatible = "generic-ahci";
|
|
status = "disabled";
|
|
reg = <0x29000000 0x180>;
|
|
interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
|
|
|
|
clocks = <&gcc SFAB_SATA_S_H_CLK>,
|
|
<&gcc SATA_H_CLK>,
|
|
<&gcc SATA_A_CLK>,
|
|
<&gcc SATA_RXOOB_CLK>,
|
|
<&gcc SATA_PMALIVE_CLK>;
|
|
clock-names = "slave_iface",
|
|
"iface",
|
|
"bus",
|
|
"rxoob",
|
|
"core_pmalive";
|
|
|
|
assigned-clocks = <&gcc SATA_RXOOB_CLK>,
|
|
<&gcc SATA_PMALIVE_CLK>;
|
|
assigned-clock-rates = <100000000>, <100000000>;
|
|
|
|
phys = <&sata_phy0>;
|
|
phy-names = "sata-phy";
|
|
};
|
|
|
|
/* Temporary fixed regulator */
|
|
sdcc1bam:dma@12402000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x12402000 0x8000>;
|
|
interrupts = <0 98 0>;
|
|
clocks = <&gcc SDC1_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
sdcc3bam:dma@12182000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x12182000 0x8000>;
|
|
interrupts = <0 96 0>;
|
|
clocks = <&gcc SDC3_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
sdcc4bam:dma@121c2000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x121c2000 0x8000>;
|
|
interrupts = <0 95 0>;
|
|
clocks = <&gcc SDC4_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x2000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <96000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x2000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <192000000>;
|
|
no-1-8-v;
|
|
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sdcc4: sdcc@121c0000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x121c0000 0x2000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdc4_gpios>;
|
|
};
|
|
};
|
|
|
|
tcsr: syscon@1a400000 {
|
|
compatible = "qcom,tcsr-apq8064", "syscon";
|
|
reg = <0x1a400000 0x100>;
|
|
};
|
|
|
|
pcie: pci@1b500000 {
|
|
compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
|
|
reg = <0x1b500000 0x1000
|
|
0x1b502000 0x80
|
|
0x1b600000 0x100
|
|
0x0ff00000 0x100000>;
|
|
reg-names = "dbi", "elbi", "parf", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
|
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
|
|
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
clocks = <&gcc PCIE_A_CLK>,
|
|
<&gcc PCIE_H_CLK>,
|
|
<&gcc PCIE_PHY_REF_CLK>;
|
|
clock-names = "core", "iface", "phy";
|
|
resets = <&gcc PCIE_ACLK_RESET>,
|
|
<&gcc PCIE_HCLK_RESET>,
|
|
<&gcc PCIE_POR_RESET>,
|
|
<&gcc PCIE_PCI_RESET>,
|
|
<&gcc PCIE_PHY_RESET>;
|
|
reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
#include "qcom-apq8064-pins.dtsi"
|