forked from Minki/linux
ba394f0b6a
On OMAP SOCs using PL310 controllers, power_ctrl register is not accessible from non-secure software even on PL310 versions which support it. The secure code takes care of setting it up correctly and power transitions are proven on these devices. For example, AM437x has L2C-310 version r3p3 and ROM code on that device does not support writing to L2C-310 power control register. The L2C driver, however, tries writing to this register for all revisions >= r3p0. This leads to a warning dump on boot which leads most users to believe that L2 cache is non-functional. Since the problem is understood, and cannot be addressed through software, replace the warning with a pr_info() while maintaining the WARN_ON() for other truly unexpected scenarios. Reported-by: Nishanth Menon <nm@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
263 lines
5.9 KiB
C
263 lines
5.9 KiB
C
/*
|
|
* OMAP4 specific common source file.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments, Inc.
|
|
* Author:
|
|
* Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
*
|
|
* This program is free software,you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/memblock.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/export.h>
|
|
#include <linux/irqchip/arm-gic.h>
|
|
#include <linux/irqchip/irq-crossbar.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/reboot.h>
|
|
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/memblock.h>
|
|
#include <asm/smp_twd.h>
|
|
|
|
#include "omap-wakeupgen.h"
|
|
#include "soc.h"
|
|
#include "iomap.h"
|
|
#include "common.h"
|
|
#include "mmc.h"
|
|
#include "prminst44xx.h"
|
|
#include "prcm_mpu44xx.h"
|
|
#include "omap4-sar-layout.h"
|
|
#include "omap-secure.h"
|
|
#include "sram.h"
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
static void __iomem *l2cache_base;
|
|
#endif
|
|
|
|
static void __iomem *sar_ram_base;
|
|
static void __iomem *gic_dist_base_addr;
|
|
static void __iomem *twd_base;
|
|
|
|
#define IRQ_LOCALTIMER 29
|
|
|
|
#ifdef CONFIG_OMAP4_ERRATA_I688
|
|
/* Used to implement memory barrier on DRAM path */
|
|
#define OMAP4_DRAM_BARRIER_VA 0xfe600000
|
|
|
|
void __iomem *dram_sync, *sram_sync;
|
|
|
|
static phys_addr_t paddr;
|
|
static u32 size;
|
|
|
|
void omap_bus_sync(void)
|
|
{
|
|
if (dram_sync && sram_sync) {
|
|
writel_relaxed(readl_relaxed(dram_sync), dram_sync);
|
|
writel_relaxed(readl_relaxed(sram_sync), sram_sync);
|
|
isb();
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(omap_bus_sync);
|
|
|
|
/* Steal one page physical memory for barrier implementation */
|
|
int __init omap_barrier_reserve_memblock(void)
|
|
{
|
|
|
|
size = ALIGN(PAGE_SIZE, SZ_1M);
|
|
paddr = arm_memblock_steal(size, SZ_1M);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __init omap_barriers_init(void)
|
|
{
|
|
struct map_desc dram_io_desc[1];
|
|
|
|
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
|
|
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
|
|
dram_io_desc[0].length = size;
|
|
dram_io_desc[0].type = MT_MEMORY_RW_SO;
|
|
iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
|
|
dram_sync = (void __iomem *) dram_io_desc[0].virtual;
|
|
sram_sync = (void __iomem *) OMAP4_SRAM_VA;
|
|
|
|
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
|
|
(long long) paddr, dram_io_desc[0].virtual);
|
|
|
|
}
|
|
#else
|
|
void __init omap_barriers_init(void)
|
|
{}
|
|
#endif
|
|
|
|
void gic_dist_disable(void)
|
|
{
|
|
if (gic_dist_base_addr)
|
|
writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
|
|
}
|
|
|
|
void gic_dist_enable(void)
|
|
{
|
|
if (gic_dist_base_addr)
|
|
writel_relaxed(0x1, gic_dist_base_addr + GIC_DIST_CTRL);
|
|
}
|
|
|
|
bool gic_dist_disabled(void)
|
|
{
|
|
return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1);
|
|
}
|
|
|
|
void gic_timer_retrigger(void)
|
|
{
|
|
u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT);
|
|
u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET);
|
|
u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL);
|
|
|
|
if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) {
|
|
/*
|
|
* The local timer interrupt got lost while the distributor was
|
|
* disabled. Ack the pending interrupt, and retrigger it.
|
|
*/
|
|
pr_warn("%s: lost localtimer interrupt\n", __func__);
|
|
writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT);
|
|
if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) {
|
|
writel_relaxed(1, twd_base + TWD_TIMER_COUNTER);
|
|
twd_ctrl |= TWD_TIMER_CONTROL_ENABLE;
|
|
writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
|
|
void __iomem *omap4_get_l2cache_base(void)
|
|
{
|
|
return l2cache_base;
|
|
}
|
|
|
|
static void omap4_l2c310_write_sec(unsigned long val, unsigned reg)
|
|
{
|
|
unsigned smc_op;
|
|
|
|
switch (reg) {
|
|
case L2X0_CTRL:
|
|
smc_op = OMAP4_MON_L2X0_CTRL_INDEX;
|
|
break;
|
|
|
|
case L2X0_AUX_CTRL:
|
|
smc_op = OMAP4_MON_L2X0_AUXCTRL_INDEX;
|
|
break;
|
|
|
|
case L2X0_DEBUG_CTRL:
|
|
smc_op = OMAP4_MON_L2X0_DBG_CTRL_INDEX;
|
|
break;
|
|
|
|
case L310_PREFETCH_CTRL:
|
|
smc_op = OMAP4_MON_L2X0_PREFETCH_INDEX;
|
|
break;
|
|
|
|
case L310_POWER_CTRL:
|
|
pr_info_once("OMAP L2C310: ROM does not support power control setting\n");
|
|
return;
|
|
|
|
default:
|
|
WARN_ONCE(1, "OMAP L2C310: ignoring write to reg 0x%x\n", reg);
|
|
return;
|
|
}
|
|
|
|
omap_smc1(smc_op, val);
|
|
}
|
|
|
|
int __init omap_l2_cache_init(void)
|
|
{
|
|
u32 aux_ctrl;
|
|
|
|
/* Static mapping, never released */
|
|
l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
|
|
if (WARN_ON(!l2cache_base))
|
|
return -ENOMEM;
|
|
|
|
/* 16-way associativity, parity disabled, way size - 64KB (es2.0 +) */
|
|
aux_ctrl = L2C_AUX_CTRL_SHARED_OVERRIDE |
|
|
L310_AUX_CTRL_DATA_PREFETCH |
|
|
L310_AUX_CTRL_INSTR_PREFETCH;
|
|
|
|
outer_cache.write_sec = omap4_l2c310_write_sec;
|
|
if (of_have_populated_dt())
|
|
l2x0_of_init(aux_ctrl, 0xcf9fffff);
|
|
else
|
|
l2x0_init(l2cache_base, aux_ctrl, 0xcf9fffff);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void __iomem *omap4_get_sar_ram_base(void)
|
|
{
|
|
return sar_ram_base;
|
|
}
|
|
|
|
/*
|
|
* SAR RAM used to save and restore the HW
|
|
* context in low power modes
|
|
*/
|
|
static int __init omap4_sar_ram_init(void)
|
|
{
|
|
unsigned long sar_base;
|
|
|
|
/*
|
|
* To avoid code running on other OMAPs in
|
|
* multi-omap builds
|
|
*/
|
|
if (cpu_is_omap44xx())
|
|
sar_base = OMAP44XX_SAR_RAM_BASE;
|
|
else if (soc_is_omap54xx())
|
|
sar_base = OMAP54XX_SAR_RAM_BASE;
|
|
else
|
|
return -ENOMEM;
|
|
|
|
/* Static mapping, never released */
|
|
sar_ram_base = ioremap(sar_base, SZ_16K);
|
|
if (WARN_ON(!sar_ram_base))
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
omap_early_initcall(omap4_sar_ram_init);
|
|
|
|
void __init omap_gic_of_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
/* Extract GIC distributor and TWD bases for OMAP4460 ROM Errata WA */
|
|
if (!cpu_is_omap446x())
|
|
goto skip_errata_init;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
|
|
gic_dist_base_addr = of_iomap(np, 0);
|
|
WARN_ON(!gic_dist_base_addr);
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
|
|
twd_base = of_iomap(np, 0);
|
|
WARN_ON(!twd_base);
|
|
|
|
skip_errata_init:
|
|
omap_wakeupgen_init();
|
|
#ifdef CONFIG_IRQ_CROSSBAR
|
|
irqcrossbar_init();
|
|
#endif
|
|
irqchip_init();
|
|
}
|