leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
88a86aaa61
linux/arch/arm/boot/dts/ste-dbx5x0.dtsi
Linus Torvalds 88a99886c2 This is the bulk of pin control changes for the v4.3 development 
cycle
 
 Core changes:
 
 - It is possible configure groups in debugfs.
 
 - Consolidation of chained IRQ handler install/remove replacing
   all call sites where irq_set_handler_data() and
   irq_set_chained_handler() were done in succession with a
   combined call to irq_set_chained_handler_and_data(). This
   series was created by Thomas Gleixner after the problem was
   observed by Russell King.
 
 - Tglx also made another series of patches switching
   __irq_set_handler_locked() for irq_set_handler_locked() which
   is way cleaner.
 
 - Tglx also wrote a good bunch of patches to make use of
   irq_desc_get_xxx() accessors and avoid looking up irq_descs
   from IRQ numbers. The goal is to get rid of the irq number
   from the handlers in the IRQ flow which is nice.
 
 Driver feature enhancements:
 
 - Power management support for the SiRF SoC Atlas 7.
 
 - Power down support for the Qualcomm driver.
 
 - Intel Cherryview and Baytrail: switch drivers to use raw
   spinlocks in IRQ handlers to play nice with the realtime
   patch set.
 
 - Rework and new modes handling for Qualcomm SPMI-MPP.
 
 - Pinconf power source config for SH PFC.
 
 New drivers and subdrivers:
 
 - A new driver for Conexant Digicolor CX92755.
 
 - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8,
   PH1-Pro5, ProXtream2 and PH1-LD6b SoC pin control support.
 
 - Reverse-egineered the S/PDIF settings for the Allwinner
   sun4i driver.
 
 - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs
 
 - A new Freescale i.mx6ul subdriver.
 
 Cleanup:
 
 - Remove platform data support in a number of SH PFC
   subdrivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6YzgAAoJEEEQszewGV1zbIAQAILzMrzWkxsy7bhvL4QdP5/K
 OG3EodE//AE0G5gKugUDjg5t2lftdiIJVhjDA17ruETCSciuAxZSLThlMy1sQgyN
 LPxy9LlCrmsqrYt9+fmJ9js8j52RBJikKK0RUyUVz0VojTBplRpElyEx/KxwM5sG
 Hy3+hU61uKO0j9AyIcsa/RKP6SGavwZdHytJBsHNw+pODyE3UZCf52ChAVBsTPfE
 MV70g3Qzfqur7ZFqcNgtUV7qCyYvlF12ooiihrGFDOsTL3sSq4/OXB7z1z1mGGHL
 Dgq8pXJ6EIZlCbk+jFMTzPRSzy46dxNai0eErjTUVEldH1tOphzGMvKmOdm/nczH
 4M/UOWOKBE1aOYZNPtnUgDy2MRt5K9VJStCNSHEQCB2lGdojNAtmj2cmr8flBN5m
 gM9FDpIS1/C+OYYTkOY9ftPsH5zOk7sCLEHSH5USYRGJHihzLnkV90eiN6a7vlF1
 hyTGrIyl6e//E5JBgamjnR3+fYuxQGr6WeAZEP/gXZRm7BCKCaPwCarq+kPZVG4A
 nolZ/QQN6XYPSlveSPU97VYvLYEUvXaKN0Hf2DTbwkqvNFp7JORD65QLESPtQoIp
 x95iHMdB/1+0OfgOqMmlOtKpOKREeQ/R+KWACxsrr5Rfv3/7CP4BMRGypIZ/iPmz
 HWoyDI4lIebBR+JnjMjK
 =4QFX
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.3 development
  cycle.

  Like with GPIO it's a lot of stuff.  If my subsystems are any sign of
  the overall tempo of the kernel v4.3 will be a gigantic diff.

[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
  we'll see - Linus ]

  Core changes:

   - It is possible configure groups in debugfs.

   - Consolidation of chained IRQ handler install/remove replacing all
     call sites where irq_set_handler_data() and
     irq_set_chained_handler() were done in succession with a combined
     call to irq_set_chained_handler_and_data().  This series was
     created by Thomas Gleixner after the problem was observed by
     Russell King.

   - Tglx also made another series of patches switching
     __irq_set_handler_locked() for irq_set_handler_locked() which is
     way cleaner.

   - Tglx also wrote a good bunch of patches to make use of
     irq_desc_get_xxx() accessors and avoid looking up irq_descs from
     IRQ numbers.  The goal is to get rid of the irq number from the
     handlers in the IRQ flow which is nice.

  Driver feature enhancements:

   - Power management support for the SiRF SoC Atlas 7.

   - Power down support for the Qualcomm driver.

   - Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
     in IRQ handlers to play nice with the realtime patch set.

   - Rework and new modes handling for Qualcomm SPMI-MPP.

   - Pinconf power source config for SH PFC.

  New drivers and subdrivers:

   - A new driver for Conexant Digicolor CX92755.

   - A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
     ProXtream2 and PH1-LD6b SoC pin control support.

   - Reverse-egineered the S/PDIF settings for the Allwinner sun4i
     driver.

   - Support for Qualcomm Technologies QDF2xxx ARM64 SoCs

   - A new Freescale i.mx6ul subdriver.

  Cleanup:

   - Remove platform data support in a number of SH PFC subdrivers"

* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
  pinctrl: at91: fix null pointer dereference
  pinctrl: mediatek: Implement wake handler and suspend resume
  pinctrl: mediatek: Fix multiple registration issue.
  pinctrl: sh-pfc: r8a7794: add USB pin groups
  pinctrl: at91: Use generic irq_{request,release}_resources()
  pinctrl: cherryview: Use raw_spinlock for locking
  pinctrl: baytrail: Use raw_spinlock for locking
  pinctrl: imx6ul: Remove .owner field
  pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
  pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
  clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
  pinctrl: sun4i: add spdif to pin description.
  pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
  pinctrl: baytrail: Serialize all register access
  pinctrl: baytrail: Drop FSF mailing address
  pinctrl: rockchip: only enable gpio clock when it setting
  pinctrl/mediatek: fix spelling mistake in dev_err error message
  pinctrl: cherryview: Serialize all register access
  pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
  pinctrl: nomadik: reflect current input value
  ...
2015-09-04 10:22:09 -07:00

1241 lines
32 KiB
Plaintext
Raw Blame History

/*
* Copyright 2012 Linaro Ltd
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/mfd/dbx500-prcmu.h>
#include <dt-bindings/arm/ux500_pm_domains.h>
#include "skeleton.dtsi"
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "ste,dbx500-smp";
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
};
};
CPU0: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x300>;
};
CPU1: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x301>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "stericsson,db8500";
interrupt-parent = <&intc>;
ranges;
ptm@801ae000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x801ae000 0x1000>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
port {
ptm0_out_port: endpoint {
remote-endpoint = <&funnel_in_port0>;
};
};
};
ptm@801af000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x801af000 0x1000>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
port {
ptm1_out_port: endpoint {
remote-endpoint = <&funnel_in_port1>;
};
};
};
funnel@801a6000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0x801a6000 0x1000>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* funnel output ports */
port@0 {
reg = <0>;
funnel_out_port: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
/* funnel input ports */
port@1 {
reg = <0>;
funnel_in_port0: endpoint {
slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
port@2 {
reg = <1>;
funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
};
};
replicator {
compatible = "arm,coresight-replicator";
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
port@1 {
reg = <1>;
replicator_out_port1: endpoint {
remote-endpoint = <&etb_in_port>;
};
};
/* replicator input port */
port@2 {
reg = <0>;
replicator_in_port0: endpoint {
slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
};
};
tpiu@80190000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0x80190000 0x1000>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
port {
tpiu_in_port: endpoint {
slave-mode;
remote-endpoint = <&replicator_out_port0>;
};
};
};
etb@801a4000 {
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x801a4000 0x1000>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
port {
etb_in_port: endpoint {
slave-mode;
remote-endpoint = <&replicator_out_port1>;
};
};
};
intc: interrupt-controller@a0411000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0xa0411000 0x1000>,
<0xa0410100 0x100>;
};
scu@a04100000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
/*
* The backup RAM is used for retention during sleep
* and various things like spin tables
*/
backupram@80150000 {
compatible = "ste,dbx500-backupram";
reg = <0x80150000 0x2000>;
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
pm_domains: pm_domains0 {
compatible = "stericsson,ux500-pm-domains";
#power-domain-cells = <1>;
};
clocks {
compatible = "stericsson,u8500-clks";
/*
* Registers for the CLKRST block on peripheral
* groups 1, 2, 3, 5, 6,
*/
reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
<0x8000f000 0x1000>, <0xa03ff000 0x1000>,
<0xa03cf000 0x1000>;
prcmu_clk: prcmu-clock {
#clock-cells = <1>;
};
prcc_pclk: prcc-periph-clock {
#clock-cells = <2>;
};
prcc_kclk: prcc-kernel-clock {
#clock-cells = <2>;
};
rtc_clk: rtc32k-clock {
#clock-cells = <0>;
};
smp_twd_clk: smp-twd-clock {
#clock-cells = <0>;
};
};
mtu@a03c6000 {
/* Nomadik System Timer */
compatible = "st,nomadik-mtu";
reg = <0xa03c6000 0x1000>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
clock-names = "timclk", "apb_pclk";
};
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
clocks = <&smp_twd_clk>;
};
watchdog@a0410620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0xa0410620 0x20>;
interrupts = <1 14 0x304>;
clocks = <&smp_twd_clk>;
};
rtc@80154000 {
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rtc_clk>;
clock-names = "apb_pclk";
};
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e000 0x80>;
interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <0>;
gpio-ranges = <&pinctrl 0 0 32>;
clocks = <&prcc_pclk 1 9>;
};
gpio1: gpio@8012e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e080 0x80>;
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <1>;
gpio-ranges = <&pinctrl 0 32 5>;
clocks = <&prcc_pclk 1 9>;
};
gpio2: gpio@8000e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e000 0x80>;
interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <2>;
gpio-ranges = <&pinctrl 0 64 32>;
clocks = <&prcc_pclk 3 8>;
};
gpio3: gpio@8000e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e080 0x80>;
interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <3>;
gpio-ranges = <&pinctrl 0 96 2>;
clocks = <&prcc_pclk 3 8>;
};
gpio4: gpio@8000e100 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e100 0x80>;
interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <4>;
gpio-ranges = <&pinctrl 0 128 32>;
clocks = <&prcc_pclk 3 8>;
};
gpio5: gpio@8000e180 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e180 0x80>;
interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <5>;
gpio-ranges = <&pinctrl 0 160 12>;
clocks = <&prcc_pclk 3 8>;
};
gpio6: gpio@8011e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e000 0x80>;
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <6>;
gpio-ranges = <&pinctrl 0 192 32>;
clocks = <&prcc_pclk 2 11>;
};
gpio7: gpio@8011e080 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e080 0x80>;
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <7>;
gpio-ranges = <&pinctrl 0 224 7>;
clocks = <&prcc_pclk 2 11>;
};
gpio8: gpio@a03fe000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0xa03fe000 0x80>;
interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
gpio-controller;
#gpio-cells = <2>;
gpio-bank = <8>;
gpio-ranges = <&pinctrl 0 256 12>;
clocks = <&prcc_pclk 5 1>;
};
pinctrl: pinctrl {
compatible = "stericsson,db8500-pinctrl";
nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>,
<&gpio4>, <&gpio5>, <&gpio6>, <&gpio7>,
<&gpio8>;
prcm = <&prcmu>;
};
usb_per5@a03e0000 {
compatible = "stericsson,db8500-musb";
reg = <0xa03e0000 0x10000>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
dr_mode = "otg";
dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
<&dma 38 0 0x0>, /* Logical - MemToDev */
<&dma 37 0 0x2>, /* Logical - DevToMem */
<&dma 37 0 0x0>, /* Logical - MemToDev */
<&dma 36 0 0x2>, /* Logical - DevToMem */
<&dma 36 0 0x0>, /* Logical - MemToDev */
<&dma 19 0 0x2>, /* Logical - DevToMem */
<&dma 19 0 0x0>, /* Logical - MemToDev */
<&dma 18 0 0x2>, /* Logical - DevToMem */
<&dma 18 0 0x0>, /* Logical - MemToDev */
<&dma 17 0 0x2>, /* Logical - DevToMem */
<&dma 17 0 0x0>, /* Logical - MemToDev */
<&dma 16 0 0x2>, /* Logical - DevToMem */
<&dma 16 0 0x0>, /* Logical - MemToDev */
<&dma 39 0 0x2>, /* Logical - DevToMem */
<&dma 39 0 0x0>; /* Logical - MemToDev */
dma-names = "iep_1_9", "oep_1_9",
"iep_2_10", "oep_2_10",
"iep_3_11", "oep_3_11",
"iep_4_12", "oep_4_12",
"iep_5_13", "oep_5_13",
"iep_6_14", "oep_6_14",
"iep_7_15", "oep_7_15",
"iep_8", "oep_8";
clocks = <&prcc_pclk 5 0>;
};
dma: dma-controller@801C0000 {
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
reg-names = "base", "lcpa";
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <3>;
memcpy-channels = <56 57 58 59 60>;
clocks = <&prcmu_clk PRCMU_DMACLK>;
};
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
ranges;
prcmu-timer-4@80157450 {
compatible = "stericsson,db8500-prcmu-timer-4";
reg = <0x80157450 0xC>;
};
cpufreq {
compatible = "stericsson,cpufreq-ux500";
clocks = <&prcmu_clk PRCMU_ARMSS>;
clock-names = "armss";
status = "disabled";
};
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
<22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
status = "disabled";
};
db8500-prcmu-regulators {
compatible = "stericsson,db8500-prcmu-regulator";
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
regulator-compatible = "db8500_vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
regulator-compatible = "db8500_varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
regulator-compatible = "db8500_vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
regulator-compatible = "db8500_vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-compatible = "db8500_vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-compatible = "db8500_vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-compatible = "db8500_vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
regulator-compatible = "db8500_vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-compatible = "db8500_sva_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-compatible = "db8500_sva_mmdsp_ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-compatible = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-compatible = "db8500_sia_mmdsp";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
};
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-compatible = "db8500_sia_pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
regulator-compatible = "db8500_sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-compatible = "db8500_b2r2_mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
regulator-compatible = "db8500_esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-compatible = "db8500_esram12_ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
regulator-compatible = "db8500_esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-compatible = "db8500_esram34_ret";
};
};
ab8500 {
compatible = "stericsson,ab8500";
interrupt-parent = <&intc>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
ab8500_gpio: ab8500-gpio {
gpio-controller;
#gpio-cells = <2>;
};
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
interrupts = <17 IRQ_TYPE_LEVEL_HIGH
18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
interrupts = <32 IRQ_TYPE_LEVEL_HIGH
39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ab8500_battery: ab8500_battery {
stericsson,battery-type = "LIPO";
thermistor-on-batctrl;
};
ab8500_fg {
compatible = "stericsson,ab8500-fg";
battery = <&ab8500_battery>;
};
ab8500_btemp {
compatible = "stericsson,ab8500-btemp";
battery = <&ab8500_battery>;
};
ab8500_charger {
compatible = "stericsson,ab8500-charger";
battery = <&ab8500_battery>;
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
ab8500_chargalg {
compatible = "stericsson,ab8500-chargalg";
battery = <&ab8500_battery>;
};
ab8500_usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
96 IRQ_TYPE_LEVEL_HIGH
14 IRQ_TYPE_LEVEL_HIGH
15 IRQ_TYPE_LEVEL_HIGH
79 IRQ_TYPE_LEVEL_HIGH
74 IRQ_TYPE_LEVEL_HIGH
75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
"VBUS_DET_R",
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
ab8500-ponkey {
compatible = "stericsson,ab8500-poweron-key";
interrupts = <6 IRQ_TYPE_LEVEL_HIGH
7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
ab8500-sysctrl {
compatible = "stericsson,ab8500-sysctrl";
};
ab8500-pwm {
compatible = "stericsson,ab8500-pwm";
};
ab8500-debugfs {
compatible = "stericsson,ab8500-debug";
};
codec: ab8500-codec {
compatible = "stericsson,ab8500-codec";
V-AUD-supply = <&ab8500_ldo_audio_reg>;
V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
ext_regulators: ab8500-ext-regulators {
compatible = "stericsson,ab8500-ext-regulator";
ab8500_ext1_reg: ab8500_ext1 {
regulator-compatible = "ab8500_ext1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ab8500_ext2_reg: ab8500_ext2 {
regulator-compatible = "ab8500_ext2";
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-boot-on;
regulator-always-on;
};
ab8500_ext3_reg: ab8500_ext3 {
regulator-compatible = "ab8500_ext3";
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
};
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
vin-supply = <&ab8500_ext3_reg>;
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-compatible = "ab8500_ldo_aux1";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
regulator-boot-on;
/* BUG: If turned off MMC will be affected. */
regulator-always-on;
};
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-compatible = "ab8500_ldo_aux2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-compatible = "ab8500_ldo_aux3";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
};
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-compatible = "ab8500_ldo_intcore";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-compatible = "ab8500_ldo_tvout";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-compatible = "ab8500_ldo_usb";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-compatible = "ab8500_ldo_audio";
};
// supply for v-anamic1 VAMIC1 LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-compatible = "ab8500_ldo_anamic2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-compatible = "ab8500_ldo_dmic";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-compatible = "ab8500_ldo_ana";
};
};
};
};
i2c@80004000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@80122000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@80128000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@80110000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@8012a000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
clock-frequency = <400000>;
clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
clock-names = "i2cclk", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
<&dma 8 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
ssp@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
<&dma 9 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@8011a000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x8011a000 0x1000>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
<&dma 0 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@80112000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80112000 0x1000>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
<&dma 35 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@80111000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80111000 0x1000>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
<&dma 33 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@80129000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80129000 0x1000>;
interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
clock-names = "SSPCLK", "apb_pclk";
dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
<&dma 40 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
power-domains = <&pm_domains DOMAIN_VAPE>;
};
ux500_serial0: uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
<&dma 13 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
clock-names = "uart", "apb_pclk";
status = "disabled";
};
ux500_serial1: uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
<&dma 12 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
clock-names = "uart", "apb_pclk";
status = "disabled";
};
ux500_serial2: uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
<&dma 11 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
clock-names = "uart", "apb_pclk";
status = "disabled";
};
sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
<&dma 29 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
clock-names = "sdi", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
<&dma 32 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
clock-names = "sdi", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
<&dma 28 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
clock-names = "sdi", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
<&dma 41 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
clock-names = "sdi", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
<&dma 42 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
clock-names = "sdi", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
<&dma 43 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
clock-names = "sdi", "apb_pclk";
power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
<&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
clock-names = "msp", "apb_pclk";
status = "disabled";
};
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
/* This DMA channel only exist on DB8500 v1 */
dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
dma-names = "tx";
clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
clock-names = "msp", "apb_pclk";
status = "disabled";
};
// HDMI sound
msp2: msp@80117000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80117000 0x1000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */
<&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
HighPrio - Fixed */
dma-names = "rx", "tx";
clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
clock-names = "msp", "apb_pclk";
status = "disabled";
};
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
/* This DMA channel only exist on DB8500 v2 */
dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
dma-names = "rx";
clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
clock-names = "msp", "apb_pclk";
status = "disabled";
};
external-bus@50000000 {
compatible = "simple-bus";
reg = <0x50000000 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x50000000 0x4000000>;
status = "disabled";
};
cpufreq-cooling {
compatible = "stericsson,db8500-cpufreq-cooling";
status = "disabled";
};
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
<0xa0351000 0x1000>, /* DSI link 1 */
<0xa0352000 0x1000>, /* DSI link 2 */
<0xa0353000 0x1000>; /* DSI link 3 */
interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
<&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
<&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
<&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */
<&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */
<&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */
<&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */
<&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */
};
cryp@a03cb000 {
compatible = "stericsson,ux500-cryp";
reg = <0xa03cb000 0x1000>;
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
clocks = <&prcc_pclk 6 1>;
};
hash@a03c2000 {
compatible = "stericsson,ux500-hash";
reg = <0xa03c2000 0x1000>;
v-ape-supply = <&db8500_vape_reg>;
clocks = <&prcc_pclk 6 2>;
};
};
};
Reference in New Issue View Git Blame Copy Permalink