forked from Minki/linux
7586585897
The dynamic pci id logic has been bothering me for a while, and now that I started to look into how to move some of this to the driver core, I thought it was time to clean it all up. It ends up making the code smaller, and easier to follow, and fixes a few bugs at the same time (dynamic ids were not being matched everywhere, and so could be missed on some call paths for new devices, semaphore not needed to be grabbed when adding a new id and calling the driver core, etc.) I also renamed the function pci_match_device() to pci_match_id() as that's what it really does. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
902 lines
24 KiB
C
902 lines
24 KiB
C
/*
|
|
* linux/drivers/ide/setup-pci.c Version 1.10 2002/08/19
|
|
*
|
|
* Copyright (c) 1998-2000 Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* Copyright (c) 1995-1998 Mark Lord
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
* Recent Changes
|
|
* Split the set up function into multiple functions
|
|
* Use pci_set_master
|
|
* Fix misreporting of I/O v MMIO problems
|
|
* Initial fixups for simplex devices
|
|
*/
|
|
|
|
/*
|
|
* This module provides support for automatic detection and
|
|
* configuration of all PCI IDE interfaces present in a system.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
|
|
/**
|
|
* ide_match_hwif - match a PCI IDE against an ide_hwif
|
|
* @io_base: I/O base of device
|
|
* @bootable: set if its bootable
|
|
* @name: name of device
|
|
*
|
|
* Match a PCI IDE port against an entry in ide_hwifs[],
|
|
* based on io_base port if possible. Return the matching hwif,
|
|
* or a new hwif. If we find an error (clashing, out of devices, etc)
|
|
* return NULL
|
|
*
|
|
* FIXME: we need to handle mmio matches here too
|
|
*/
|
|
|
|
static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name)
|
|
{
|
|
int h;
|
|
ide_hwif_t *hwif;
|
|
|
|
/*
|
|
* Look for a hwif with matching io_base specified using
|
|
* parameters to ide_setup().
|
|
*/
|
|
for (h = 0; h < MAX_HWIFS; ++h) {
|
|
hwif = &ide_hwifs[h];
|
|
if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
|
|
if (hwif->chipset == ide_forced)
|
|
return hwif; /* a perfect match */
|
|
}
|
|
}
|
|
/*
|
|
* Look for a hwif with matching io_base default value.
|
|
* If chipset is "ide_unknown", then claim that hwif slot.
|
|
* Otherwise, some other chipset has already claimed it.. :(
|
|
*/
|
|
for (h = 0; h < MAX_HWIFS; ++h) {
|
|
hwif = &ide_hwifs[h];
|
|
if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif; /* match */
|
|
printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n",
|
|
name, io_base, hwif->name);
|
|
return NULL; /* already claimed */
|
|
}
|
|
}
|
|
/*
|
|
* Okay, there is no hwif matching our io_base,
|
|
* so we'll just claim an unassigned slot.
|
|
* Give preference to claiming other slots before claiming ide0/ide1,
|
|
* just in case there's another interface yet-to-be-scanned
|
|
* which uses ports 1f0/170 (the ide0/ide1 defaults).
|
|
*
|
|
* Unless there is a bootable card that does not use the standard
|
|
* ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag.
|
|
*/
|
|
if (bootable) {
|
|
for (h = 0; h < MAX_HWIFS; ++h) {
|
|
hwif = &ide_hwifs[h];
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif; /* pick an unused entry */
|
|
}
|
|
} else {
|
|
for (h = 2; h < MAX_HWIFS; ++h) {
|
|
hwif = ide_hwifs + h;
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif; /* pick an unused entry */
|
|
}
|
|
}
|
|
for (h = 0; h < 2; ++h) {
|
|
hwif = ide_hwifs + h;
|
|
if (hwif->chipset == ide_unknown)
|
|
return hwif; /* pick an unused entry */
|
|
}
|
|
printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name);
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* ide_setup_pci_baseregs - place a PCI IDE controller native
|
|
* @dev: PCI device of interface to switch native
|
|
* @name: Name of interface
|
|
*
|
|
* We attempt to place the PCI interface into PCI native mode. If
|
|
* we succeed the BARs are ok and the controller is in PCI mode.
|
|
* Returns 0 on success or an errno code.
|
|
*
|
|
* FIXME: if we program the interface and then fail to set the BARS
|
|
* we don't switch it back to legacy mode. Do we actually care ??
|
|
*/
|
|
|
|
static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name)
|
|
{
|
|
u8 progif = 0;
|
|
|
|
/*
|
|
* Place both IDE interfaces into PCI "native" mode:
|
|
*/
|
|
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
|
|
(progif & 5) != 5) {
|
|
if ((progif & 0xa) != 0xa) {
|
|
printk(KERN_INFO "%s: device not capable of full "
|
|
"native PCI mode\n", name);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
printk("%s: placing both ports into native PCI mode\n", name);
|
|
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
|
|
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
|
|
(progif & 5) != 5) {
|
|
printk(KERN_ERR "%s: rewrite of PROGIF failed, wanted "
|
|
"0x%04x, got 0x%04x\n",
|
|
name, progif|5, progif);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_FORCED
|
|
/*
|
|
* Long lost data from 2.0.34 that is now in 2.0.39
|
|
*
|
|
* This was used in ./drivers/block/triton.c to do DMA Base address setup
|
|
* when PnP failed. Oh the things we forget. I believe this was part
|
|
* of SFF-8038i that has been withdrawn from public access... :-((
|
|
*/
|
|
#define DEFAULT_BMIBA 0xe800 /* in case BIOS did not init it */
|
|
#define DEFAULT_BMCRBA 0xcc00 /* VIA's default value */
|
|
#define DEFAULT_BMALIBA 0xd400 /* ALI's default value */
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_FORCED */
|
|
|
|
/**
|
|
* ide_get_or_set_dma_base - setup BMIBA
|
|
* @hwif: Interface
|
|
*
|
|
* Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space:
|
|
* If need be we set up the DMA base. Where a device has a partner that
|
|
* is already in DMA mode we check and enforce IDE simplex rules.
|
|
*/
|
|
|
|
static unsigned long ide_get_or_set_dma_base (ide_hwif_t *hwif)
|
|
{
|
|
unsigned long dma_base = 0;
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_FORCED
|
|
int second_chance = 0;
|
|
|
|
second_chance_to_dma:
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_FORCED */
|
|
|
|
if (hwif->mmio)
|
|
return hwif->dma_base;
|
|
|
|
if (hwif->mate && hwif->mate->dma_base) {
|
|
dma_base = hwif->mate->dma_base - (hwif->channel ? 0 : 8);
|
|
} else {
|
|
dma_base = pci_resource_start(dev, 4);
|
|
if (!dma_base) {
|
|
printk(KERN_ERR "%s: dma_base is invalid\n",
|
|
hwif->cds->name);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA_FORCED
|
|
/* FIXME - should use pci_assign_resource surely */
|
|
if ((!dma_base) && (!second_chance)) {
|
|
unsigned long set_bmiba = 0;
|
|
second_chance++;
|
|
switch(dev->vendor) {
|
|
case PCI_VENDOR_ID_AL:
|
|
set_bmiba = DEFAULT_BMALIBA; break;
|
|
case PCI_VENDOR_ID_VIA:
|
|
set_bmiba = DEFAULT_BMCRBA; break;
|
|
case PCI_VENDOR_ID_INTEL:
|
|
set_bmiba = DEFAULT_BMIBA; break;
|
|
default:
|
|
return dma_base;
|
|
}
|
|
pci_write_config_dword(dev, 0x20, set_bmiba|1);
|
|
goto second_chance_to_dma;
|
|
}
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_FORCED */
|
|
|
|
if (dma_base) {
|
|
u8 simplex_stat = 0;
|
|
dma_base += hwif->channel ? 8 : 0;
|
|
|
|
switch(dev->device) {
|
|
case PCI_DEVICE_ID_AL_M5219:
|
|
case PCI_DEVICE_ID_AL_M5229:
|
|
case PCI_DEVICE_ID_AMD_VIPER_7409:
|
|
case PCI_DEVICE_ID_CMD_643:
|
|
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
|
|
simplex_stat = hwif->INB(dma_base + 2);
|
|
hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
|
|
simplex_stat = hwif->INB(dma_base + 2);
|
|
if (simplex_stat & 0x80) {
|
|
printk(KERN_INFO "%s: simplex device: "
|
|
"DMA forced\n",
|
|
hwif->cds->name);
|
|
}
|
|
break;
|
|
default:
|
|
/*
|
|
* If the device claims "simplex" DMA,
|
|
* this means only one of the two interfaces
|
|
* can be trusted with DMA at any point in time.
|
|
* So we should enable DMA only on one of the
|
|
* two interfaces.
|
|
*/
|
|
simplex_stat = hwif->INB(dma_base + 2);
|
|
if (simplex_stat & 0x80) {
|
|
/* simplex device? */
|
|
/*
|
|
* At this point we haven't probed the drives so we can't make the
|
|
* appropriate decision. Really we should defer this problem
|
|
* until we tune the drive then try to grab DMA ownership if we want
|
|
* to be the DMA end. This has to be become dynamic to handle hot
|
|
* plug.
|
|
*/
|
|
if (hwif->mate && hwif->mate->dma_base) {
|
|
printk(KERN_INFO "%s: simplex device: "
|
|
"DMA disabled\n",
|
|
hwif->cds->name);
|
|
dma_base = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return dma_base;
|
|
}
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
|
|
|
|
void ide_setup_pci_noise (struct pci_dev *dev, ide_pci_device_t *d)
|
|
{
|
|
printk(KERN_INFO "%s: IDE controller at PCI slot %s\n",
|
|
d->name, pci_name(dev));
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
|
|
|
|
|
|
/**
|
|
* ide_pci_enable - do PCI enables
|
|
* @dev: PCI device
|
|
* @d: IDE pci device data
|
|
*
|
|
* Enable the IDE PCI device. We attempt to enable the device in full
|
|
* but if that fails then we only need BAR4 so we will enable that.
|
|
*
|
|
* Returns zero on success or an error code
|
|
*/
|
|
|
|
static int ide_pci_enable(struct pci_dev *dev, ide_pci_device_t *d)
|
|
{
|
|
int ret;
|
|
|
|
if (pci_enable_device(dev)) {
|
|
ret = pci_enable_device_bars(dev, 1 << 4);
|
|
if (ret < 0) {
|
|
printk(KERN_WARNING "%s: (ide_setup_pci_device:) "
|
|
"Could not enable device.\n", d->name);
|
|
goto out;
|
|
}
|
|
printk(KERN_WARNING "%s: BIOS configuration fixed.\n", d->name);
|
|
}
|
|
|
|
/*
|
|
* assume all devices can do 32-bit dma for now. we can add a
|
|
* dma mask field to the ide_pci_device_t if we need it (or let
|
|
* lower level driver set the dma mask)
|
|
*/
|
|
ret = pci_set_dma_mask(dev, DMA_32BIT_MASK);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: can't set dma mask\n", d->name);
|
|
goto out;
|
|
}
|
|
|
|
/* FIXME: Temporary - until we put in the hotplug interface logic
|
|
Check that the bits we want are not in use by someone else. */
|
|
ret = pci_request_region(dev, 4, "ide_tmp");
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
pci_release_region(dev, 4);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ide_pci_configure - configure an unconfigured device
|
|
* @dev: PCI device
|
|
* @d: IDE pci device data
|
|
*
|
|
* Enable and configure the PCI device we have been passed.
|
|
* Returns zero on success or an error code.
|
|
*/
|
|
|
|
static int ide_pci_configure(struct pci_dev *dev, ide_pci_device_t *d)
|
|
{
|
|
u16 pcicmd = 0;
|
|
/*
|
|
* PnP BIOS was *supposed* to have setup this device, but we
|
|
* can do it ourselves, so long as the BIOS has assigned an IRQ
|
|
* (or possibly the device is using a "legacy header" for IRQs).
|
|
* Maybe the user deliberately *disabled* the device,
|
|
* but we'll eventually ignore it again if no drives respond.
|
|
*/
|
|
if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO))
|
|
{
|
|
printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name);
|
|
return -ENODEV;
|
|
}
|
|
if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd)) {
|
|
printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
|
|
return -EIO;
|
|
}
|
|
if (!(pcicmd & PCI_COMMAND_IO)) {
|
|
printk(KERN_ERR "%s: unable to enable IDE controller\n", d->name);
|
|
return -ENXIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ide_pci_check_iomem - check a register is I/O
|
|
* @dev: pci device
|
|
* @d: ide_pci_device
|
|
* @bar: bar number
|
|
*
|
|
* Checks if a BAR is configured and points to MMIO space. If so
|
|
* print an error and return an error code. Otherwise return 0
|
|
*/
|
|
|
|
static int ide_pci_check_iomem(struct pci_dev *dev, ide_pci_device_t *d, int bar)
|
|
{
|
|
ulong flags = pci_resource_flags(dev, bar);
|
|
|
|
/* Unconfigured ? */
|
|
if (!flags || pci_resource_len(dev, bar) == 0)
|
|
return 0;
|
|
|
|
/* I/O space */
|
|
if(flags & PCI_BASE_ADDRESS_IO_MASK)
|
|
return 0;
|
|
|
|
/* Bad */
|
|
printk(KERN_ERR "%s: IO baseregs (BIOS) are reported "
|
|
"as MEM, report to "
|
|
"<andre@linux-ide.org>.\n", d->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/**
|
|
* ide_hwif_configure - configure an IDE interface
|
|
* @dev: PCI device holding interface
|
|
* @d: IDE pci data
|
|
* @mate: Paired interface if any
|
|
*
|
|
* Perform the initial set up for the hardware interface structure. This
|
|
* is done per interface port rather than per PCI device. There may be
|
|
* more than one port per device.
|
|
*
|
|
* Returns the new hardware interface structure, or NULL on a failure
|
|
*/
|
|
|
|
static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *mate, int port, int irq)
|
|
{
|
|
unsigned long ctl = 0, base = 0;
|
|
ide_hwif_t *hwif;
|
|
|
|
if ((d->flags & IDEPCI_FLAG_ISA_PORTS) == 0) {
|
|
/* Possibly we should fail if these checks report true */
|
|
ide_pci_check_iomem(dev, d, 2*port);
|
|
ide_pci_check_iomem(dev, d, 2*port+1);
|
|
|
|
ctl = pci_resource_start(dev, 2*port+1);
|
|
base = pci_resource_start(dev, 2*port);
|
|
if ((ctl && !base) || (base && !ctl)) {
|
|
printk(KERN_ERR "%s: inconsistent baseregs (BIOS) "
|
|
"for port %d, skipping\n", d->name, port);
|
|
return NULL;
|
|
}
|
|
}
|
|
if (!ctl)
|
|
{
|
|
/* Use default values */
|
|
ctl = port ? 0x374 : 0x3f4;
|
|
base = port ? 0x170 : 0x1f0;
|
|
}
|
|
if ((hwif = ide_match_hwif(base, d->bootable, d->name)) == NULL)
|
|
return NULL; /* no room in ide_hwifs[] */
|
|
if (hwif->io_ports[IDE_DATA_OFFSET] != base ||
|
|
hwif->io_ports[IDE_CONTROL_OFFSET] != (ctl | 2)) {
|
|
memset(&hwif->hw, 0, sizeof(hwif->hw));
|
|
#ifndef IDE_ARCH_OBSOLETE_INIT
|
|
ide_std_init_ports(&hwif->hw, base, (ctl | 2));
|
|
hwif->hw.io_ports[IDE_IRQ_OFFSET] = 0;
|
|
#else
|
|
ide_init_hwif_ports(&hwif->hw, base, (ctl | 2), NULL);
|
|
#endif
|
|
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
|
|
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
|
|
}
|
|
hwif->chipset = ide_pci;
|
|
hwif->pci_dev = dev;
|
|
hwif->cds = (struct ide_pci_device_s *) d;
|
|
hwif->channel = port;
|
|
|
|
if (!hwif->irq)
|
|
hwif->irq = irq;
|
|
if (mate) {
|
|
hwif->mate = mate;
|
|
mate->mate = hwif;
|
|
}
|
|
return hwif;
|
|
}
|
|
|
|
/**
|
|
* ide_hwif_setup_dma - configure DMA interface
|
|
* @dev: PCI device
|
|
* @d: IDE pci data
|
|
* @hwif: Hardware interface we are configuring
|
|
*
|
|
* Set up the DMA base for the interface. Enable the master bits as
|
|
* necessary and attempt to bring the device DMA into a ready to use
|
|
* state
|
|
*/
|
|
|
|
#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
|
|
static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif)
|
|
{
|
|
}
|
|
#else
|
|
static void ide_hwif_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif)
|
|
{
|
|
u16 pcicmd;
|
|
pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
|
|
|
|
if ((d->autodma == AUTODMA) ||
|
|
((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
|
|
(dev->class & 0x80))) {
|
|
unsigned long dma_base = ide_get_or_set_dma_base(hwif);
|
|
if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) {
|
|
/*
|
|
* Set up BM-DMA capability
|
|
* (PnP BIOS should have done this)
|
|
*/
|
|
/* default DMA off if we had to configure it here */
|
|
hwif->autodma = 0;
|
|
pci_set_master(dev);
|
|
if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) {
|
|
printk(KERN_ERR "%s: %s error updating PCICMD\n",
|
|
hwif->name, d->name);
|
|
dma_base = 0;
|
|
}
|
|
}
|
|
if (dma_base) {
|
|
if (d->init_dma) {
|
|
d->init_dma(hwif, dma_base);
|
|
} else {
|
|
ide_setup_dma(hwif, dma_base, 8);
|
|
}
|
|
} else {
|
|
printk(KERN_INFO "%s: %s Bus-Master DMA disabled "
|
|
"(BIOS)\n", hwif->name, d->name);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifndef CONFIG_IDEDMA_PCI_AUTO
|
|
#warning CONFIG_IDEDMA_PCI_AUTO=n support is obsolete, and will be removed soon.
|
|
#endif
|
|
|
|
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/
|
|
|
|
/**
|
|
* ide_setup_pci_controller - set up IDE PCI
|
|
* @dev: PCI device
|
|
* @d: IDE PCI data
|
|
* @noisy: verbose flag
|
|
* @config: returned as 1 if we configured the hardware
|
|
*
|
|
* Set up the PCI and controller side of the IDE interface. This brings
|
|
* up the PCI side of the device, checks that the device is enabled
|
|
* and enables it if need be
|
|
*/
|
|
|
|
static int ide_setup_pci_controller(struct pci_dev *dev, ide_pci_device_t *d, int noisy, int *config)
|
|
{
|
|
int ret;
|
|
u32 class_rev;
|
|
u16 pcicmd;
|
|
|
|
if (noisy)
|
|
ide_setup_pci_noise(dev, d);
|
|
|
|
ret = ide_pci_enable(dev, d);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: error accessing PCI regs\n", d->name);
|
|
goto out;
|
|
}
|
|
if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */
|
|
ret = ide_pci_configure(dev, d);
|
|
if (ret < 0)
|
|
goto out;
|
|
*config = 1;
|
|
printk(KERN_INFO "%s: device enabled (Linux)\n", d->name);
|
|
}
|
|
|
|
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
|
|
class_rev &= 0xff;
|
|
if (noisy)
|
|
printk(KERN_INFO "%s: chipset revision %d\n", d->name, class_rev);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ide_pci_setup_ports - configure ports/devices on PCI IDE
|
|
* @dev: PCI device
|
|
* @d: IDE pci device info
|
|
* @pciirq: IRQ line
|
|
* @index: ata index to update
|
|
*
|
|
* Scan the interfaces attached to this device and do any
|
|
* necessary per port setup. Attach the devices and ask the
|
|
* generic DMA layer to do its work for us.
|
|
*
|
|
* Normally called automaticall from do_ide_pci_setup_device,
|
|
* but is also used directly as a helper function by some controllers
|
|
* where the chipset setup is not the default PCI IDE one.
|
|
*/
|
|
|
|
void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, ata_index_t *index)
|
|
{
|
|
int port;
|
|
int at_least_one_hwif_enabled = 0;
|
|
ide_hwif_t *hwif, *mate = NULL;
|
|
static int secondpdc = 0;
|
|
u8 tmp;
|
|
|
|
index->all = 0xf0f0;
|
|
|
|
/*
|
|
* Set up the IDE ports
|
|
*/
|
|
|
|
for (port = 0; port <= 1; ++port) {
|
|
ide_pci_enablebit_t *e = &(d->enablebits[port]);
|
|
|
|
/*
|
|
* If this is a Promise FakeRaid controller,
|
|
* the 2nd controller will be marked as
|
|
* disabled while it is actually there and enabled
|
|
* by the bios for raid purposes.
|
|
* Skip the normal "is it enabled" test for those.
|
|
*/
|
|
if ((d->flags & IDEPCI_FLAG_FORCE_PDC) &&
|
|
(secondpdc++==1) && (port==1))
|
|
goto controller_ok;
|
|
|
|
if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
|
|
(tmp & e->mask) != e->val))
|
|
continue; /* port not enabled */
|
|
controller_ok:
|
|
|
|
if (d->channels <= port)
|
|
break;
|
|
|
|
if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL)
|
|
continue;
|
|
|
|
/* setup proper ancestral information */
|
|
hwif->gendev.parent = &dev->dev;
|
|
|
|
if (hwif->channel) {
|
|
index->b.high = hwif->index;
|
|
} else {
|
|
index->b.low = hwif->index;
|
|
}
|
|
|
|
|
|
if (d->init_iops)
|
|
d->init_iops(hwif);
|
|
|
|
if (d->autodma == NODMA)
|
|
goto bypass_legacy_dma;
|
|
|
|
if(d->init_setup_dma)
|
|
d->init_setup_dma(dev, d, hwif);
|
|
else
|
|
ide_hwif_setup_dma(dev, d, hwif);
|
|
bypass_legacy_dma:
|
|
if (d->init_hwif)
|
|
/* Call chipset-specific routine
|
|
* for each enabled hwif
|
|
*/
|
|
d->init_hwif(hwif);
|
|
|
|
mate = hwif;
|
|
at_least_one_hwif_enabled = 1;
|
|
}
|
|
if (!at_least_one_hwif_enabled)
|
|
printk(KERN_INFO "%s: neither IDE port enabled (BIOS)\n", d->name);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_pci_setup_ports);
|
|
|
|
/*
|
|
* ide_setup_pci_device() looks at the primary/secondary interfaces
|
|
* on a PCI IDE device and, if they are enabled, prepares the IDE driver
|
|
* for use with them. This generic code works for most PCI chipsets.
|
|
*
|
|
* One thing that is not standardized is the location of the
|
|
* primary/secondary interface "enable/disable" bits. For chipsets that
|
|
* we "know" about, this information is in the ide_pci_device_t struct;
|
|
* for all other chipsets, we just assume both interfaces are enabled.
|
|
*/
|
|
static int do_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d,
|
|
ata_index_t *index, u8 noisy)
|
|
{
|
|
static ata_index_t ata_index = { .b = { .low = 0xff, .high = 0xff } };
|
|
int tried_config = 0;
|
|
int pciirq, ret;
|
|
|
|
ret = ide_setup_pci_controller(dev, d, noisy, &tried_config);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
/*
|
|
* Can we trust the reported IRQ?
|
|
*/
|
|
pciirq = dev->irq;
|
|
|
|
/* Is it an "IDE storage" device in non-PCI mode? */
|
|
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5) {
|
|
if (noisy)
|
|
printk(KERN_INFO "%s: not 100%% native mode: "
|
|
"will probe irqs later\n", d->name);
|
|
/*
|
|
* This allows offboard ide-pci cards the enable a BIOS,
|
|
* verify interrupt settings of split-mirror pci-config
|
|
* space, place chipset into init-mode, and/or preserve
|
|
* an interrupt if the card is not native ide support.
|
|
*/
|
|
ret = d->init_chipset ? d->init_chipset(dev, d->name) : 0;
|
|
if (ret < 0)
|
|
goto out;
|
|
pciirq = ret;
|
|
} else if (tried_config) {
|
|
if (noisy)
|
|
printk(KERN_INFO "%s: will probe irqs later\n", d->name);
|
|
pciirq = 0;
|
|
} else if (!pciirq) {
|
|
if (noisy)
|
|
printk(KERN_WARNING "%s: bad irq (%d): will probe later\n",
|
|
d->name, pciirq);
|
|
pciirq = 0;
|
|
} else {
|
|
if (d->init_chipset) {
|
|
ret = d->init_chipset(dev, d->name);
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
if (noisy)
|
|
#ifdef __sparc__
|
|
printk(KERN_INFO "%s: 100%% native mode on irq %s\n",
|
|
d->name, __irq_itoa(pciirq));
|
|
#else
|
|
printk(KERN_INFO "%s: 100%% native mode on irq %d\n",
|
|
d->name, pciirq);
|
|
#endif
|
|
}
|
|
|
|
/* FIXME: silent failure can happen */
|
|
|
|
*index = ata_index;
|
|
ide_pci_setup_ports(dev, d, pciirq, index);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
int ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t *d)
|
|
{
|
|
ata_index_t index_list;
|
|
int ret;
|
|
|
|
ret = do_ide_setup_pci_device(dev, d, &index_list, 1);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if ((index_list.b.low & 0xf0) != 0xf0)
|
|
probe_hwif_init_with_fixup(&ide_hwifs[index_list.b.low], d->fixup);
|
|
if ((index_list.b.high & 0xf0) != 0xf0)
|
|
probe_hwif_init_with_fixup(&ide_hwifs[index_list.b.high], d->fixup);
|
|
|
|
create_proc_ide_interfaces();
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_setup_pci_device);
|
|
|
|
int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2,
|
|
ide_pci_device_t *d)
|
|
{
|
|
struct pci_dev *pdev[] = { dev1, dev2 };
|
|
ata_index_t index_list[2];
|
|
int ret, i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
ret = do_ide_setup_pci_device(pdev[i], d, index_list + i, !i);
|
|
/*
|
|
* FIXME: Mom, mom, they stole me the helper function to undo
|
|
* do_ide_setup_pci_device() on the first device!
|
|
*/
|
|
if (ret < 0)
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
u8 idx[2] = { index_list[i].b.low, index_list[i].b.high };
|
|
int j;
|
|
|
|
for (j = 0; j < 2; j++) {
|
|
if ((idx[j] & 0xf0) != 0xf0)
|
|
probe_hwif_init(ide_hwifs + idx[j]);
|
|
}
|
|
}
|
|
|
|
create_proc_ide_interfaces();
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_setup_pci_devices);
|
|
|
|
/*
|
|
* Module interfaces
|
|
*/
|
|
|
|
static int pre_init = 1; /* Before first ordered IDE scan */
|
|
static LIST_HEAD(ide_pci_drivers);
|
|
|
|
/*
|
|
* ide_register_pci_driver - attach IDE driver
|
|
* @driver: pci driver
|
|
*
|
|
* Registers a driver with the IDE layer. The IDE layer arranges that
|
|
* boot time setup is done in the expected device order and then
|
|
* hands the controllers off to the core PCI code to do the rest of
|
|
* the work.
|
|
*
|
|
* The driver_data of the driver table must point to an ide_pci_device_t
|
|
* describing the interface.
|
|
*
|
|
* Returns are the same as for pci_register_driver
|
|
*/
|
|
|
|
int ide_pci_register_driver(struct pci_driver *driver)
|
|
{
|
|
if(!pre_init)
|
|
return pci_module_init(driver);
|
|
list_add_tail(&driver->node, &ide_pci_drivers);
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_pci_register_driver);
|
|
|
|
/**
|
|
* ide_unregister_pci_driver - unregister an IDE driver
|
|
* @driver: driver to remove
|
|
*
|
|
* Unregister a currently installed IDE driver. Returns are the same
|
|
* as for pci_unregister_driver
|
|
*/
|
|
|
|
void ide_pci_unregister_driver(struct pci_driver *driver)
|
|
{
|
|
if(!pre_init)
|
|
pci_unregister_driver(driver);
|
|
else
|
|
list_del(&driver->node);
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ide_pci_unregister_driver);
|
|
|
|
/**
|
|
* ide_scan_pcidev - find an IDE driver for a device
|
|
* @dev: PCI device to check
|
|
*
|
|
* Look for an IDE driver to handle the device we are considering.
|
|
* This is only used during boot up to get the ordering correct. After
|
|
* boot up the pci layer takes over the job.
|
|
*/
|
|
|
|
static int __init ide_scan_pcidev(struct pci_dev *dev)
|
|
{
|
|
struct list_head *l;
|
|
struct pci_driver *d;
|
|
|
|
list_for_each(l, &ide_pci_drivers)
|
|
{
|
|
d = list_entry(l, struct pci_driver, node);
|
|
if(d->id_table)
|
|
{
|
|
const struct pci_device_id *id = pci_match_id(d->id_table, dev);
|
|
if(id != NULL)
|
|
{
|
|
if(d->probe(dev, id) >= 0)
|
|
{
|
|
dev->driver = d;
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ide_scan_pcibus - perform the initial IDE driver scan
|
|
* @scan_direction: set for reverse order scanning
|
|
*
|
|
* Perform the initial bus rather than driver ordered scan of the
|
|
* PCI drivers. After this all IDE pci handling becomes standard
|
|
* module ordering not traditionally ordered.
|
|
*/
|
|
|
|
void __init ide_scan_pcibus (int scan_direction)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
struct pci_driver *d;
|
|
struct list_head *l, *n;
|
|
|
|
pre_init = 0;
|
|
if (!scan_direction) {
|
|
while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
|
|
ide_scan_pcidev(dev);
|
|
}
|
|
} else {
|
|
while ((dev = pci_find_device_reverse(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
|
|
ide_scan_pcidev(dev);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Hand the drivers over to the PCI layer now we
|
|
* are post init.
|
|
*/
|
|
|
|
list_for_each_safe(l, n, &ide_pci_drivers)
|
|
{
|
|
list_del(l);
|
|
d = list_entry(l, struct pci_driver, node);
|
|
pci_register_driver(d);
|
|
}
|
|
}
|