linux/include/asm-sparc64/cpudata.h
David S. Miller fd0504c321 [SPARC64]: Send all device interrupts via one PIL.
This is the first in a series of cleanups that will hopefully
allow a seamless attempt at using the generic IRQ handling
infrastructure in the Linux kernel.

Define PIL_DEVICE_IRQ and vector all device interrupts through
there.

Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector
the timer interrupt directly to a specific handler since the
timer interrupt is the only event that will be signaled on
PIL 14.

The irq_worklist is now in the per-cpu trap_block[].

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:20:00 -07:00

229 lines
6.7 KiB
C

/* cpudata.h: Per-cpu parameters.
*
* Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_CPUDATA_H
#define _SPARC64_CPUDATA_H
#include <asm/hypervisor.h>
#include <asm/asi.h>
#ifndef __ASSEMBLY__
#include <linux/percpu.h>
#include <linux/threads.h>
typedef struct {
/* Dcache line 1 */
unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
unsigned int multiplier;
unsigned int counter;
unsigned int __pad1;
unsigned long clock_tick; /* %tick's per second */
unsigned long udelay_val;
/* Dcache line 2, rarely used */
unsigned int dcache_size;
unsigned int dcache_line_size;
unsigned int icache_size;
unsigned int icache_line_size;
unsigned int ecache_size;
unsigned int ecache_line_size;
unsigned int __pad3;
unsigned int __pad4;
} cpuinfo_sparc;
DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
#define local_cpu_data() __get_cpu_var(__cpu_data)
/* Trap handling code needs to get at a few critical values upon
* trap entry and to process TSB misses. These cannot be in the
* per_cpu() area as we really need to lock them into the TLB and
* thus make them part of the main kernel image. As a result we
* try to make this as small as possible.
*
* This is padded out and aligned to 64-bytes to avoid false sharing
* on SMP.
*/
/* If you modify the size of this structure, please update
* TRAP_BLOCK_SZ_SHIFT below.
*/
struct thread_info;
struct trap_per_cpu {
/* D-cache line 1: Basic thread information, cpu and device mondo queues */
struct thread_info *thread;
unsigned long pgd_paddr;
unsigned long cpu_mondo_pa;
unsigned long dev_mondo_pa;
/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
unsigned long resum_mondo_pa;
unsigned long resum_kernel_buf_pa;
unsigned long nonresum_mondo_pa;
unsigned long nonresum_kernel_buf_pa;
/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
struct hv_fault_status fault_info;
/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */
unsigned long cpu_mondo_block_pa;
unsigned long cpu_list_pa;
unsigned long tsb_huge;
unsigned long tsb_huge_temp;
/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size. */
unsigned int irq_worklist;
unsigned int __pad1;
unsigned long __pad2[3];
} __attribute__((aligned(64)));
extern struct trap_per_cpu trap_block[NR_CPUS];
extern void init_cur_cpu_trap(struct thread_info *);
extern void setup_tba(void);
struct cpuid_patch_entry {
unsigned int addr;
unsigned int cheetah_safari[4];
unsigned int cheetah_jbus[4];
unsigned int starfire[4];
unsigned int sun4v[4];
};
extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
struct sun4v_1insn_patch_entry {
unsigned int addr;
unsigned int insn;
};
extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
__sun4v_1insn_patch_end;
struct sun4v_2insn_patch_entry {
unsigned int addr;
unsigned int insns[2];
};
extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
__sun4v_2insn_patch_end;
#endif /* !(__ASSEMBLY__) */
#define TRAP_PER_CPU_THREAD 0x00
#define TRAP_PER_CPU_PGD_PADDR 0x08
#define TRAP_PER_CPU_CPU_MONDO_PA 0x10
#define TRAP_PER_CPU_DEV_MONDO_PA 0x18
#define TRAP_PER_CPU_RESUM_MONDO_PA 0x20
#define TRAP_PER_CPU_RESUM_KBUF_PA 0x28
#define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30
#define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38
#define TRAP_PER_CPU_FAULT_INFO 0x40
#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0
#define TRAP_PER_CPU_CPU_LIST_PA 0xc8
#define TRAP_PER_CPU_TSB_HUGE 0xd0
#define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8
#define TRAP_PER_CPU_IRQ_WORKLIST 0xe0
#define TRAP_BLOCK_SZ_SHIFT 8
#include <asm/scratchpad.h>
#define __GET_CPUID(REG) \
/* Spitfire implementation (default). */ \
661: ldxa [%g0] ASI_UPA_CONFIG, REG; \
srlx REG, 17, REG; \
and REG, 0x1f, REG; \
nop; \
.section .cpuid_patch, "ax"; \
/* Instruction location. */ \
.word 661b; \
/* Cheetah Safari implementation. */ \
ldxa [%g0] ASI_SAFARI_CONFIG, REG; \
srlx REG, 17, REG; \
and REG, 0x3ff, REG; \
nop; \
/* Cheetah JBUS implementation. */ \
ldxa [%g0] ASI_JBUS_CONFIG, REG; \
srlx REG, 17, REG; \
and REG, 0x1f, REG; \
nop; \
/* Starfire implementation. */ \
sethi %hi(0x1fff40000d0 >> 9), REG; \
sllx REG, 9, REG; \
or REG, 0xd0, REG; \
lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\
/* sun4v implementation. */ \
mov SCRATCHPAD_CPUID, REG; \
ldxa [REG] ASI_SCRATCHPAD, REG; \
nop; \
nop; \
.previous;
#ifdef CONFIG_SMP
#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
__GET_CPUID(TMP) \
sethi %hi(trap_block), DEST; \
sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \
or DEST, %lo(trap_block), DEST; \
add DEST, TMP, DEST; \
/* Clobbers TMP, current address space PGD phys address into DEST. */
#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
/* Clobbers TMP, loads DEST with current thread info pointer. */
#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
/* Given the current thread info pointer in THR, load the per-cpu
* area base of the current processor into DEST. REG1, REG2, and REG3 are
* clobbered.
*
* You absolutely cannot use DEST as a temporary in this code. The
* reason is that traps can happen during execution, and return from
* trap will load the fully resolved DEST per-cpu base. This can corrupt
* the calculations done by the macro mid-stream.
*/
#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \
ldub [THR + TI_CPU], REG1; \
sethi %hi(__per_cpu_shift), REG3; \
sethi %hi(__per_cpu_base), REG2; \
ldx [REG3 + %lo(__per_cpu_shift)], REG3; \
ldx [REG2 + %lo(__per_cpu_base)], REG2; \
sllx REG1, REG3, REG3; \
add REG3, REG2, DEST;
#else
#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
sethi %hi(trap_block), DEST; \
or DEST, %lo(trap_block), DEST; \
/* Uniprocessor versions, we know the cpuid is zero. */
#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
/* Clobbers TMP, loads local processor's IRQ work area into DEST. */
#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
add DEST, TRAP_PER_CPU_IRQ_WORKLIST, DEST;
#define TRAP_LOAD_THREAD_REG(DEST, TMP) \
TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \
ldx [DEST + TRAP_PER_CPU_THREAD], DEST;
/* No per-cpu areas on uniprocessor, so no need to load DEST. */
#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
#endif /* !(CONFIG_SMP) */
#endif /* _SPARC64_CPUDATA_H */