forked from Minki/linux
2a93a0da06
There is logically better to request IRQ when we initialise all structures. Align the driver with the rest on the same matter. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200728125504.27786-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
1296 lines
35 KiB
C
1296 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* PCA953x 4/8/16/24/40 bit I/O ports
|
|
*
|
|
* Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
|
|
* Copyright (C) 2007 Marvell International Ltd.
|
|
*
|
|
* Derived from drivers/i2c/chips/pca9539.c
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_data/pca953x.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#define PCA953X_INPUT 0x00
|
|
#define PCA953X_OUTPUT 0x01
|
|
#define PCA953X_INVERT 0x02
|
|
#define PCA953X_DIRECTION 0x03
|
|
|
|
#define REG_ADDR_MASK GENMASK(5, 0)
|
|
#define REG_ADDR_EXT BIT(6)
|
|
#define REG_ADDR_AI BIT(7)
|
|
|
|
#define PCA957X_IN 0x00
|
|
#define PCA957X_INVRT 0x01
|
|
#define PCA957X_BKEN 0x02
|
|
#define PCA957X_PUPD 0x03
|
|
#define PCA957X_CFG 0x04
|
|
#define PCA957X_OUT 0x05
|
|
#define PCA957X_MSK 0x06
|
|
#define PCA957X_INTS 0x07
|
|
|
|
#define PCAL953X_OUT_STRENGTH 0x20
|
|
#define PCAL953X_IN_LATCH 0x22
|
|
#define PCAL953X_PULL_EN 0x23
|
|
#define PCAL953X_PULL_SEL 0x24
|
|
#define PCAL953X_INT_MASK 0x25
|
|
#define PCAL953X_INT_STAT 0x26
|
|
#define PCAL953X_OUT_CONF 0x27
|
|
|
|
#define PCAL6524_INT_EDGE 0x28
|
|
#define PCAL6524_INT_CLR 0x2a
|
|
#define PCAL6524_IN_STATUS 0x2b
|
|
#define PCAL6524_OUT_INDCONF 0x2c
|
|
#define PCAL6524_DEBOUNCE 0x2d
|
|
|
|
#define PCA_GPIO_MASK GENMASK(7, 0)
|
|
|
|
#define PCAL_GPIO_MASK GENMASK(4, 0)
|
|
#define PCAL_PINCTRL_MASK GENMASK(6, 5)
|
|
|
|
#define PCA_INT BIT(8)
|
|
#define PCA_PCAL BIT(9)
|
|
#define PCA_LATCH_INT (PCA_PCAL | PCA_INT)
|
|
#define PCA953X_TYPE BIT(12)
|
|
#define PCA957X_TYPE BIT(13)
|
|
#define PCA_TYPE_MASK GENMASK(15, 12)
|
|
|
|
#define PCA_CHIP_TYPE(x) ((x) & PCA_TYPE_MASK)
|
|
|
|
static const struct i2c_device_id pca953x_id[] = {
|
|
{ "pca6416", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9534", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9536", 4 | PCA953X_TYPE, },
|
|
{ "pca9537", 4 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9538", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9554", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca9556", 8 | PCA953X_TYPE, },
|
|
{ "pca9557", 8 | PCA953X_TYPE, },
|
|
{ "pca9574", 8 | PCA957X_TYPE | PCA_INT, },
|
|
{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
|
|
{ "pca9698", 40 | PCA953X_TYPE, },
|
|
|
|
{ "pcal6416", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
|
|
{ "pcal6524", 24 | PCA953X_TYPE | PCA_LATCH_INT, },
|
|
{ "pcal9535", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
|
|
{ "pcal9555a", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
|
|
|
|
{ "max7310", 8 | PCA953X_TYPE, },
|
|
{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "max7315", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "max7318", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "pca6107", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "tca6408", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
|
|
{ "tca9539", 16 | PCA953X_TYPE | PCA_INT, },
|
|
{ "tca9554", 8 | PCA953X_TYPE | PCA_INT, },
|
|
{ "xra1202", 8 | PCA953X_TYPE },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, pca953x_id);
|
|
|
|
#ifdef CONFIG_GPIO_PCA953X_IRQ
|
|
|
|
#include <linux/dmi.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/list.h>
|
|
|
|
static const struct dmi_system_id pca953x_dmi_acpi_irq_info[] = {
|
|
{
|
|
/*
|
|
* On Intel Galileo Gen 2 board the IRQ pin of one of
|
|
* the I²C GPIO expanders, which has GpioInt() resource,
|
|
* is provided as an absolute number instead of being
|
|
* relative. Since first controller (gpio-sch.c) and
|
|
* second (gpio-dwapb.c) are at the fixed bases, we may
|
|
* safely refer to the number in the global space to get
|
|
* an IRQ out of it.
|
|
*/
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static int pca953x_acpi_get_pin(struct acpi_resource *ares, void *data)
|
|
{
|
|
struct acpi_resource_gpio *agpio;
|
|
int *pin = data;
|
|
|
|
if (acpi_gpio_get_irq_resource(ares, &agpio))
|
|
*pin = agpio->pin_table[0];
|
|
return 1;
|
|
}
|
|
|
|
static int pca953x_acpi_find_pin(struct device *dev)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(dev);
|
|
int pin = -ENOENT, ret;
|
|
LIST_HEAD(r);
|
|
|
|
ret = acpi_dev_get_resources(adev, &r, pca953x_acpi_get_pin, &pin);
|
|
acpi_dev_free_resource_list(&r);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return pin;
|
|
}
|
|
#else
|
|
static inline int pca953x_acpi_find_pin(struct device *dev) { return -ENXIO; }
|
|
#endif
|
|
|
|
static int pca953x_acpi_get_irq(struct device *dev)
|
|
{
|
|
int pin, ret;
|
|
|
|
pin = pca953x_acpi_find_pin(dev);
|
|
if (pin < 0)
|
|
return pin;
|
|
|
|
dev_info(dev, "Applying ACPI interrupt quirk (GPIO %d)\n", pin);
|
|
|
|
if (!gpio_is_valid(pin))
|
|
return -EINVAL;
|
|
|
|
ret = gpio_request(pin, "pca953x interrupt");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpio_to_irq(pin);
|
|
|
|
/* When pin is used as an IRQ, no need to keep it requested */
|
|
gpio_free(pin);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct acpi_device_id pca953x_acpi_ids[] = {
|
|
{ "INT3491", 16 | PCA953X_TYPE | PCA_LATCH_INT, },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, pca953x_acpi_ids);
|
|
|
|
#define MAX_BANK 5
|
|
#define BANK_SZ 8
|
|
#define MAX_LINE (MAX_BANK * BANK_SZ)
|
|
|
|
#define NBANK(chip) DIV_ROUND_UP(chip->gpio_chip.ngpio, BANK_SZ)
|
|
|
|
struct pca953x_reg_config {
|
|
int direction;
|
|
int output;
|
|
int input;
|
|
int invert;
|
|
};
|
|
|
|
static const struct pca953x_reg_config pca953x_regs = {
|
|
.direction = PCA953X_DIRECTION,
|
|
.output = PCA953X_OUTPUT,
|
|
.input = PCA953X_INPUT,
|
|
.invert = PCA953X_INVERT,
|
|
};
|
|
|
|
static const struct pca953x_reg_config pca957x_regs = {
|
|
.direction = PCA957X_CFG,
|
|
.output = PCA957X_OUT,
|
|
.input = PCA957X_IN,
|
|
.invert = PCA957X_INVRT,
|
|
};
|
|
|
|
struct pca953x_chip {
|
|
unsigned gpio_start;
|
|
struct mutex i2c_lock;
|
|
struct regmap *regmap;
|
|
|
|
#ifdef CONFIG_GPIO_PCA953X_IRQ
|
|
struct mutex irq_lock;
|
|
DECLARE_BITMAP(irq_mask, MAX_LINE);
|
|
DECLARE_BITMAP(irq_stat, MAX_LINE);
|
|
DECLARE_BITMAP(irq_trig_raise, MAX_LINE);
|
|
DECLARE_BITMAP(irq_trig_fall, MAX_LINE);
|
|
struct irq_chip irq_chip;
|
|
#endif
|
|
atomic_t wakeup_path;
|
|
|
|
struct i2c_client *client;
|
|
struct gpio_chip gpio_chip;
|
|
const char *const *names;
|
|
unsigned long driver_data;
|
|
struct regulator *regulator;
|
|
|
|
const struct pca953x_reg_config *regs;
|
|
};
|
|
|
|
static int pca953x_bank_shift(struct pca953x_chip *chip)
|
|
{
|
|
return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
|
|
}
|
|
|
|
#define PCA953x_BANK_INPUT BIT(0)
|
|
#define PCA953x_BANK_OUTPUT BIT(1)
|
|
#define PCA953x_BANK_POLARITY BIT(2)
|
|
#define PCA953x_BANK_CONFIG BIT(3)
|
|
|
|
#define PCA957x_BANK_INPUT BIT(0)
|
|
#define PCA957x_BANK_POLARITY BIT(1)
|
|
#define PCA957x_BANK_BUSHOLD BIT(2)
|
|
#define PCA957x_BANK_CONFIG BIT(4)
|
|
#define PCA957x_BANK_OUTPUT BIT(5)
|
|
|
|
#define PCAL9xxx_BANK_IN_LATCH BIT(8 + 2)
|
|
#define PCAL9xxx_BANK_PULL_EN BIT(8 + 3)
|
|
#define PCAL9xxx_BANK_PULL_SEL BIT(8 + 4)
|
|
#define PCAL9xxx_BANK_IRQ_MASK BIT(8 + 5)
|
|
#define PCAL9xxx_BANK_IRQ_STAT BIT(8 + 6)
|
|
|
|
/*
|
|
* We care about the following registers:
|
|
* - Standard set, below 0x40, each port can be replicated up to 8 times
|
|
* - PCA953x standard
|
|
* Input port 0x00 + 0 * bank_size R
|
|
* Output port 0x00 + 1 * bank_size RW
|
|
* Polarity Inversion port 0x00 + 2 * bank_size RW
|
|
* Configuration port 0x00 + 3 * bank_size RW
|
|
* - PCA957x with mixed up registers
|
|
* Input port 0x00 + 0 * bank_size R
|
|
* Polarity Inversion port 0x00 + 1 * bank_size RW
|
|
* Bus hold port 0x00 + 2 * bank_size RW
|
|
* Configuration port 0x00 + 4 * bank_size RW
|
|
* Output port 0x00 + 5 * bank_size RW
|
|
*
|
|
* - Extended set, above 0x40, often chip specific.
|
|
* - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
|
|
* Input latch register 0x40 + 2 * bank_size RW
|
|
* Pull-up/pull-down enable reg 0x40 + 3 * bank_size RW
|
|
* Pull-up/pull-down select reg 0x40 + 4 * bank_size RW
|
|
* Interrupt mask register 0x40 + 5 * bank_size RW
|
|
* Interrupt status register 0x40 + 6 * bank_size R
|
|
*
|
|
* - Registers with bit 0x80 set, the AI bit
|
|
* The bit is cleared and the registers fall into one of the
|
|
* categories above.
|
|
*/
|
|
|
|
static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
|
|
u32 checkbank)
|
|
{
|
|
int bank_shift = pca953x_bank_shift(chip);
|
|
int bank = (reg & REG_ADDR_MASK) >> bank_shift;
|
|
int offset = reg & (BIT(bank_shift) - 1);
|
|
|
|
/* Special PCAL extended register check. */
|
|
if (reg & REG_ADDR_EXT) {
|
|
if (!(chip->driver_data & PCA_PCAL))
|
|
return false;
|
|
bank += 8;
|
|
}
|
|
|
|
/* Register is not in the matching bank. */
|
|
if (!(BIT(bank) & checkbank))
|
|
return false;
|
|
|
|
/* Register is not within allowed range of bank. */
|
|
if (offset >= NBANK(chip))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool pca953x_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
struct pca953x_chip *chip = dev_get_drvdata(dev);
|
|
u32 bank;
|
|
|
|
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
|
|
bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
|
|
PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
|
|
} else {
|
|
bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
|
|
PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
|
|
PCA957x_BANK_BUSHOLD;
|
|
}
|
|
|
|
if (chip->driver_data & PCA_PCAL) {
|
|
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
|
|
PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK |
|
|
PCAL9xxx_BANK_IRQ_STAT;
|
|
}
|
|
|
|
return pca953x_check_register(chip, reg, bank);
|
|
}
|
|
|
|
static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
struct pca953x_chip *chip = dev_get_drvdata(dev);
|
|
u32 bank;
|
|
|
|
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
|
|
bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
|
|
PCA953x_BANK_CONFIG;
|
|
} else {
|
|
bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
|
|
PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
|
|
}
|
|
|
|
if (chip->driver_data & PCA_PCAL)
|
|
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_PULL_EN |
|
|
PCAL9xxx_BANK_PULL_SEL | PCAL9xxx_BANK_IRQ_MASK;
|
|
|
|
return pca953x_check_register(chip, reg, bank);
|
|
}
|
|
|
|
static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
struct pca953x_chip *chip = dev_get_drvdata(dev);
|
|
u32 bank;
|
|
|
|
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
|
|
bank = PCA953x_BANK_INPUT;
|
|
else
|
|
bank = PCA957x_BANK_INPUT;
|
|
|
|
if (chip->driver_data & PCA_PCAL)
|
|
bank |= PCAL9xxx_BANK_IRQ_STAT;
|
|
|
|
return pca953x_check_register(chip, reg, bank);
|
|
}
|
|
|
|
static const struct regmap_config pca953x_i2c_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.readable_reg = pca953x_readable_register,
|
|
.writeable_reg = pca953x_writeable_register,
|
|
.volatile_reg = pca953x_volatile_register,
|
|
|
|
.disable_locking = true,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = 0x7f,
|
|
};
|
|
|
|
static const struct regmap_config pca953x_ai_i2c_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.read_flag_mask = REG_ADDR_AI,
|
|
.write_flag_mask = REG_ADDR_AI,
|
|
|
|
.readable_reg = pca953x_readable_register,
|
|
.writeable_reg = pca953x_writeable_register,
|
|
.volatile_reg = pca953x_volatile_register,
|
|
|
|
.disable_locking = true,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = 0x7f,
|
|
};
|
|
|
|
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off)
|
|
{
|
|
int bank_shift = pca953x_bank_shift(chip);
|
|
int addr = (reg & PCAL_GPIO_MASK) << bank_shift;
|
|
int pinctrl = (reg & PCAL_PINCTRL_MASK) << 1;
|
|
u8 regaddr = pinctrl | addr | (off / BANK_SZ);
|
|
|
|
return regaddr;
|
|
}
|
|
|
|
static int pca953x_write_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
|
|
{
|
|
u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
|
|
u8 value[MAX_BANK];
|
|
int i, ret;
|
|
|
|
for (i = 0; i < NBANK(chip); i++)
|
|
value[i] = bitmap_get_value8(val, i * BANK_SZ);
|
|
|
|
ret = regmap_bulk_write(chip->regmap, regaddr, value, NBANK(chip));
|
|
if (ret < 0) {
|
|
dev_err(&chip->client->dev, "failed writing register\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca953x_read_regs(struct pca953x_chip *chip, int reg, unsigned long *val)
|
|
{
|
|
u8 regaddr = pca953x_recalc_addr(chip, reg, 0);
|
|
u8 value[MAX_BANK];
|
|
int i, ret;
|
|
|
|
ret = regmap_bulk_read(chip->regmap, regaddr, value, NBANK(chip));
|
|
if (ret < 0) {
|
|
dev_err(&chip->client->dev, "failed reading register\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < NBANK(chip); i++)
|
|
bitmap_set_value8(val, value[i], i * BANK_SZ);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
|
|
u8 bit = BIT(off % BANK_SZ);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
ret = regmap_write_bits(chip->regmap, dirreg, bit, bit);
|
|
mutex_unlock(&chip->i2c_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int pca953x_gpio_direction_output(struct gpio_chip *gc,
|
|
unsigned off, int val)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
|
|
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
|
|
u8 bit = BIT(off % BANK_SZ);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
/* set output level */
|
|
ret = regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* then direction */
|
|
ret = regmap_write_bits(chip->regmap, dirreg, bit, 0);
|
|
exit:
|
|
mutex_unlock(&chip->i2c_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
u8 inreg = pca953x_recalc_addr(chip, chip->regs->input, off);
|
|
u8 bit = BIT(off % BANK_SZ);
|
|
u32 reg_val;
|
|
int ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
ret = regmap_read(chip->regmap, inreg, ®_val);
|
|
mutex_unlock(&chip->i2c_lock);
|
|
if (ret < 0) {
|
|
/*
|
|
* NOTE:
|
|
* diagnostic already emitted; that's all we should
|
|
* do unless gpio_*_value_cansleep() calls become different
|
|
* from their nonsleeping siblings (and report faults).
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
return !!(reg_val & bit);
|
|
}
|
|
|
|
static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
u8 outreg = pca953x_recalc_addr(chip, chip->regs->output, off);
|
|
u8 bit = BIT(off % BANK_SZ);
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
regmap_write_bits(chip->regmap, outreg, bit, val ? bit : 0);
|
|
mutex_unlock(&chip->i2c_lock);
|
|
}
|
|
|
|
static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
u8 dirreg = pca953x_recalc_addr(chip, chip->regs->direction, off);
|
|
u8 bit = BIT(off % BANK_SZ);
|
|
u32 reg_val;
|
|
int ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
ret = regmap_read(chip->regmap, dirreg, ®_val);
|
|
mutex_unlock(&chip->i2c_lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (reg_val & bit)
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
static int pca953x_gpio_get_multiple(struct gpio_chip *gc,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
DECLARE_BITMAP(reg_val, MAX_LINE);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
ret = pca953x_read_regs(chip, chip->regs->input, reg_val);
|
|
mutex_unlock(&chip->i2c_lock);
|
|
if (ret)
|
|
return ret;
|
|
|
|
bitmap_replace(bits, bits, reg_val, mask, gc->ngpio);
|
|
return 0;
|
|
}
|
|
|
|
static void pca953x_gpio_set_multiple(struct gpio_chip *gc,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
DECLARE_BITMAP(reg_val, MAX_LINE);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
ret = pca953x_read_regs(chip, chip->regs->output, reg_val);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
bitmap_replace(reg_val, reg_val, bits, mask, gc->ngpio);
|
|
|
|
pca953x_write_regs(chip, chip->regs->output, reg_val);
|
|
exit:
|
|
mutex_unlock(&chip->i2c_lock);
|
|
}
|
|
|
|
static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip,
|
|
unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
u8 pull_en_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_EN, offset);
|
|
u8 pull_sel_reg = pca953x_recalc_addr(chip, PCAL953X_PULL_SEL, offset);
|
|
u8 bit = BIT(offset % BANK_SZ);
|
|
int ret;
|
|
|
|
/*
|
|
* pull-up/pull-down configuration requires PCAL extended
|
|
* registers
|
|
*/
|
|
if (!(chip->driver_data & PCA_PCAL))
|
|
return -ENOTSUPP;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
|
|
/* Disable pull-up/pull-down */
|
|
ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Configure pull-up/pull-down */
|
|
if (config == PIN_CONFIG_BIAS_PULL_UP)
|
|
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit);
|
|
else if (config == PIN_CONFIG_BIAS_PULL_DOWN)
|
|
ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Enable pull-up/pull-down */
|
|
ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit);
|
|
|
|
exit:
|
|
mutex_unlock(&chip->i2c_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
|
|
switch (pinconf_to_config_param(config)) {
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
return pca953x_gpio_set_pull_up_down(chip, offset, config);
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
|
|
{
|
|
struct gpio_chip *gc;
|
|
|
|
gc = &chip->gpio_chip;
|
|
|
|
gc->direction_input = pca953x_gpio_direction_input;
|
|
gc->direction_output = pca953x_gpio_direction_output;
|
|
gc->get = pca953x_gpio_get_value;
|
|
gc->set = pca953x_gpio_set_value;
|
|
gc->get_direction = pca953x_gpio_get_direction;
|
|
gc->get_multiple = pca953x_gpio_get_multiple;
|
|
gc->set_multiple = pca953x_gpio_set_multiple;
|
|
gc->set_config = pca953x_gpio_set_config;
|
|
gc->can_sleep = true;
|
|
|
|
gc->base = chip->gpio_start;
|
|
gc->ngpio = gpios;
|
|
gc->label = dev_name(&chip->client->dev);
|
|
gc->parent = &chip->client->dev;
|
|
gc->owner = THIS_MODULE;
|
|
gc->names = chip->names;
|
|
}
|
|
|
|
#ifdef CONFIG_GPIO_PCA953X_IRQ
|
|
static void pca953x_irq_mask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
|
|
clear_bit(hwirq, chip->irq_mask);
|
|
}
|
|
|
|
static void pca953x_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
|
|
set_bit(hwirq, chip->irq_mask);
|
|
}
|
|
|
|
static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
|
|
if (on)
|
|
atomic_inc(&chip->wakeup_path);
|
|
else
|
|
atomic_dec(&chip->wakeup_path);
|
|
|
|
return irq_set_irq_wake(chip->client->irq, on);
|
|
}
|
|
|
|
static void pca953x_irq_bus_lock(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
|
|
mutex_lock(&chip->irq_lock);
|
|
}
|
|
|
|
static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
DECLARE_BITMAP(irq_mask, MAX_LINE);
|
|
DECLARE_BITMAP(reg_direction, MAX_LINE);
|
|
int level;
|
|
|
|
if (chip->driver_data & PCA_PCAL) {
|
|
/* Enable latch on interrupt-enabled inputs */
|
|
pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
|
|
|
|
bitmap_complement(irq_mask, chip->irq_mask, gc->ngpio);
|
|
|
|
/* Unmask enabled interrupts */
|
|
pca953x_write_regs(chip, PCAL953X_INT_MASK, irq_mask);
|
|
}
|
|
|
|
/* Switch direction to input if needed */
|
|
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
|
|
|
|
bitmap_or(irq_mask, chip->irq_trig_fall, chip->irq_trig_raise, gc->ngpio);
|
|
bitmap_complement(reg_direction, reg_direction, gc->ngpio);
|
|
bitmap_and(irq_mask, irq_mask, reg_direction, gc->ngpio);
|
|
|
|
/* Look for any newly setup interrupt */
|
|
for_each_set_bit(level, irq_mask, gc->ngpio)
|
|
pca953x_gpio_direction_input(&chip->gpio_chip, level);
|
|
|
|
mutex_unlock(&chip->irq_lock);
|
|
}
|
|
|
|
static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
|
|
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
|
|
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
|
|
d->irq, type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
|
|
assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pca953x_irq_shutdown(struct irq_data *d)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct pca953x_chip *chip = gpiochip_get_data(gc);
|
|
irq_hw_number_t hwirq = irqd_to_hwirq(d);
|
|
|
|
clear_bit(hwirq, chip->irq_trig_raise);
|
|
clear_bit(hwirq, chip->irq_trig_fall);
|
|
}
|
|
|
|
static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)
|
|
{
|
|
struct gpio_chip *gc = &chip->gpio_chip;
|
|
DECLARE_BITMAP(reg_direction, MAX_LINE);
|
|
DECLARE_BITMAP(old_stat, MAX_LINE);
|
|
DECLARE_BITMAP(cur_stat, MAX_LINE);
|
|
DECLARE_BITMAP(new_stat, MAX_LINE);
|
|
DECLARE_BITMAP(trigger, MAX_LINE);
|
|
int ret;
|
|
|
|
if (chip->driver_data & PCA_PCAL) {
|
|
/* Read the current interrupt status from the device */
|
|
ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, trigger);
|
|
if (ret)
|
|
return false;
|
|
|
|
/* Check latched inputs and clear interrupt status */
|
|
ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
|
|
if (ret)
|
|
return false;
|
|
|
|
/* Apply filter for rising/falling edge selection */
|
|
bitmap_replace(new_stat, chip->irq_trig_fall, chip->irq_trig_raise, cur_stat, gc->ngpio);
|
|
|
|
bitmap_and(pending, new_stat, trigger, gc->ngpio);
|
|
|
|
return !bitmap_empty(pending, gc->ngpio);
|
|
}
|
|
|
|
ret = pca953x_read_regs(chip, chip->regs->input, cur_stat);
|
|
if (ret)
|
|
return false;
|
|
|
|
/* Remove output pins from the equation */
|
|
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
|
|
|
|
bitmap_copy(old_stat, chip->irq_stat, gc->ngpio);
|
|
|
|
bitmap_and(new_stat, cur_stat, reg_direction, gc->ngpio);
|
|
bitmap_xor(cur_stat, new_stat, old_stat, gc->ngpio);
|
|
bitmap_and(trigger, cur_stat, chip->irq_mask, gc->ngpio);
|
|
|
|
if (bitmap_empty(trigger, gc->ngpio))
|
|
return false;
|
|
|
|
bitmap_copy(chip->irq_stat, new_stat, gc->ngpio);
|
|
|
|
bitmap_and(cur_stat, chip->irq_trig_fall, old_stat, gc->ngpio);
|
|
bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio);
|
|
bitmap_or(new_stat, old_stat, cur_stat, gc->ngpio);
|
|
bitmap_and(pending, new_stat, trigger, gc->ngpio);
|
|
|
|
return !bitmap_empty(pending, gc->ngpio);
|
|
}
|
|
|
|
static irqreturn_t pca953x_irq_handler(int irq, void *devid)
|
|
{
|
|
struct pca953x_chip *chip = devid;
|
|
struct gpio_chip *gc = &chip->gpio_chip;
|
|
DECLARE_BITMAP(pending, MAX_LINE);
|
|
int level;
|
|
bool ret;
|
|
|
|
mutex_lock(&chip->i2c_lock);
|
|
ret = pca953x_irq_pending(chip, pending);
|
|
mutex_unlock(&chip->i2c_lock);
|
|
|
|
for_each_set_bit(level, pending, gc->ngpio)
|
|
handle_nested_irq(irq_find_mapping(gc->irq.domain, level));
|
|
|
|
return IRQ_RETVAL(ret);
|
|
}
|
|
|
|
static int pca953x_irq_setup(struct pca953x_chip *chip, int irq_base)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
struct irq_chip *irq_chip = &chip->irq_chip;
|
|
DECLARE_BITMAP(reg_direction, MAX_LINE);
|
|
DECLARE_BITMAP(irq_stat, MAX_LINE);
|
|
struct gpio_irq_chip *girq;
|
|
int ret;
|
|
|
|
if (dmi_first_match(pca953x_dmi_acpi_irq_info)) {
|
|
ret = pca953x_acpi_get_irq(&client->dev);
|
|
if (ret > 0)
|
|
client->irq = ret;
|
|
}
|
|
|
|
if (!client->irq)
|
|
return 0;
|
|
|
|
if (irq_base == -1)
|
|
return 0;
|
|
|
|
if (!(chip->driver_data & PCA_INT))
|
|
return 0;
|
|
|
|
ret = pca953x_read_regs(chip, chip->regs->input, irq_stat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* There is no way to know which GPIO line generated the
|
|
* interrupt. We have to rely on the previous read for
|
|
* this purpose.
|
|
*/
|
|
pca953x_read_regs(chip, chip->regs->direction, reg_direction);
|
|
bitmap_and(chip->irq_stat, irq_stat, reg_direction, chip->gpio_chip.ngpio);
|
|
mutex_init(&chip->irq_lock);
|
|
|
|
irq_chip->name = dev_name(&client->dev);
|
|
irq_chip->irq_mask = pca953x_irq_mask;
|
|
irq_chip->irq_unmask = pca953x_irq_unmask;
|
|
irq_chip->irq_set_wake = pca953x_irq_set_wake;
|
|
irq_chip->irq_bus_lock = pca953x_irq_bus_lock;
|
|
irq_chip->irq_bus_sync_unlock = pca953x_irq_bus_sync_unlock;
|
|
irq_chip->irq_set_type = pca953x_irq_set_type;
|
|
irq_chip->irq_shutdown = pca953x_irq_shutdown;
|
|
|
|
girq = &chip->gpio_chip.irq;
|
|
girq->chip = irq_chip;
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_simple_irq;
|
|
girq->threaded = true;
|
|
girq->first = irq_base; /* FIXME: get rid of this */
|
|
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, pca953x_irq_handler,
|
|
IRQF_ONESHOT | IRQF_SHARED,
|
|
dev_name(&client->dev), chip);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to request irq %d\n",
|
|
client->irq);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* CONFIG_GPIO_PCA953X_IRQ */
|
|
static int pca953x_irq_setup(struct pca953x_chip *chip,
|
|
int irq_base)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
|
|
if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT))
|
|
dev_warn(&client->dev, "interrupt support not compiled in\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int device_pca95xx_init(struct pca953x_chip *chip, u32 invert)
|
|
{
|
|
DECLARE_BITMAP(val, MAX_LINE);
|
|
int ret;
|
|
|
|
ret = regcache_sync_region(chip->regmap, chip->regs->output,
|
|
chip->regs->output + NBANK(chip));
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
|
|
chip->regs->direction + NBANK(chip));
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* set platform specific polarity inversion */
|
|
if (invert)
|
|
bitmap_fill(val, MAX_LINE);
|
|
else
|
|
bitmap_zero(val, MAX_LINE);
|
|
|
|
ret = pca953x_write_regs(chip, chip->regs->invert, val);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
|
|
{
|
|
DECLARE_BITMAP(val, MAX_LINE);
|
|
int ret;
|
|
|
|
ret = device_pca95xx_init(chip, invert);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* To enable register 6, 7 to control pull up and pull down */
|
|
memset(val, 0x02, NBANK(chip));
|
|
ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
|
|
if (ret)
|
|
goto out;
|
|
|
|
return 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int pca953x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *i2c_id)
|
|
{
|
|
struct pca953x_platform_data *pdata;
|
|
struct pca953x_chip *chip;
|
|
int irq_base = 0;
|
|
int ret;
|
|
u32 invert = 0;
|
|
struct regulator *reg;
|
|
const struct regmap_config *regmap_config;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
|
|
if (chip == NULL)
|
|
return -ENOMEM;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (pdata) {
|
|
irq_base = pdata->irq_base;
|
|
chip->gpio_start = pdata->gpio_base;
|
|
invert = pdata->invert;
|
|
chip->names = pdata->names;
|
|
} else {
|
|
struct gpio_desc *reset_gpio;
|
|
|
|
chip->gpio_start = -1;
|
|
irq_base = 0;
|
|
|
|
/*
|
|
* See if we need to de-assert a reset pin.
|
|
*
|
|
* There is no known ACPI-enabled platforms that are
|
|
* using "reset" GPIO. Otherwise any of those platform
|
|
* must use _DSD method with corresponding property.
|
|
*/
|
|
reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(reset_gpio))
|
|
return PTR_ERR(reset_gpio);
|
|
}
|
|
|
|
chip->client = client;
|
|
|
|
reg = devm_regulator_get(&client->dev, "vcc");
|
|
if (IS_ERR(reg)) {
|
|
ret = PTR_ERR(reg);
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(&client->dev, "reg get err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = regulator_enable(reg);
|
|
if (ret) {
|
|
dev_err(&client->dev, "reg en err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
chip->regulator = reg;
|
|
|
|
if (i2c_id) {
|
|
chip->driver_data = i2c_id->driver_data;
|
|
} else {
|
|
const void *match;
|
|
|
|
match = device_get_match_data(&client->dev);
|
|
if (!match) {
|
|
ret = -ENODEV;
|
|
goto err_exit;
|
|
}
|
|
|
|
chip->driver_data = (uintptr_t)match;
|
|
}
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
|
|
|
|
if (NBANK(chip) > 2 || PCA_CHIP_TYPE(chip->driver_data) == PCA957X_TYPE) {
|
|
dev_info(&client->dev, "using AI\n");
|
|
regmap_config = &pca953x_ai_i2c_regmap;
|
|
} else {
|
|
dev_info(&client->dev, "using no AI\n");
|
|
regmap_config = &pca953x_i2c_regmap;
|
|
}
|
|
|
|
chip->regmap = devm_regmap_init_i2c(client, regmap_config);
|
|
if (IS_ERR(chip->regmap)) {
|
|
ret = PTR_ERR(chip->regmap);
|
|
goto err_exit;
|
|
}
|
|
|
|
regcache_mark_dirty(chip->regmap);
|
|
|
|
mutex_init(&chip->i2c_lock);
|
|
/*
|
|
* In case we have an i2c-mux controlled by a GPIO provided by an
|
|
* expander using the same driver higher on the device tree, read the
|
|
* i2c adapter nesting depth and use the retrieved value as lockdep
|
|
* subclass for chip->i2c_lock.
|
|
*
|
|
* REVISIT: This solution is not complete. It protects us from lockdep
|
|
* false positives when the expander controlling the i2c-mux is on
|
|
* a different level on the device tree, but not when it's on the same
|
|
* level on a different branch (in which case the subclass number
|
|
* would be the same).
|
|
*
|
|
* TODO: Once a correct solution is developed, a similar fix should be
|
|
* applied to all other i2c-controlled GPIO expanders (and potentially
|
|
* regmap-i2c).
|
|
*/
|
|
lockdep_set_subclass(&chip->i2c_lock,
|
|
i2c_adapter_depth(client->adapter));
|
|
|
|
/* initialize cached registers from their original values.
|
|
* we can't share this chip with another i2c master.
|
|
*/
|
|
|
|
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
|
|
chip->regs = &pca953x_regs;
|
|
ret = device_pca95xx_init(chip, invert);
|
|
} else {
|
|
chip->regs = &pca957x_regs;
|
|
ret = device_pca957x_init(chip, invert);
|
|
}
|
|
if (ret)
|
|
goto err_exit;
|
|
|
|
ret = pca953x_irq_setup(chip, irq_base);
|
|
if (ret)
|
|
goto err_exit;
|
|
|
|
ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
|
|
if (ret)
|
|
goto err_exit;
|
|
|
|
if (pdata && pdata->setup) {
|
|
ret = pdata->setup(client, chip->gpio_chip.base,
|
|
chip->gpio_chip.ngpio, pdata->context);
|
|
if (ret < 0)
|
|
dev_warn(&client->dev, "setup failed, %d\n", ret);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_exit:
|
|
regulator_disable(chip->regulator);
|
|
return ret;
|
|
}
|
|
|
|
static int pca953x_remove(struct i2c_client *client)
|
|
{
|
|
struct pca953x_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct pca953x_chip *chip = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
if (pdata && pdata->teardown) {
|
|
ret = pdata->teardown(client, chip->gpio_chip.base,
|
|
chip->gpio_chip.ngpio, pdata->context);
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "teardown failed, %d\n", ret);
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
|
|
regulator_disable(chip->regulator);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int pca953x_regcache_sync(struct device *dev)
|
|
{
|
|
struct pca953x_chip *chip = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/*
|
|
* The ordering between direction and output is important,
|
|
* sync these registers first and only then sync the rest.
|
|
*/
|
|
ret = regcache_sync_region(chip->regmap, chip->regs->direction,
|
|
chip->regs->direction + NBANK(chip));
|
|
if (ret) {
|
|
dev_err(dev, "Failed to sync GPIO dir registers: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regcache_sync_region(chip->regmap, chip->regs->output,
|
|
chip->regs->output + NBANK(chip));
|
|
if (ret) {
|
|
dev_err(dev, "Failed to sync GPIO out registers: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_GPIO_PCA953X_IRQ
|
|
if (chip->driver_data & PCA_PCAL) {
|
|
ret = regcache_sync_region(chip->regmap, PCAL953X_IN_LATCH,
|
|
PCAL953X_IN_LATCH + NBANK(chip));
|
|
if (ret) {
|
|
dev_err(dev, "Failed to sync INT latch registers: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regcache_sync_region(chip->regmap, PCAL953X_INT_MASK,
|
|
PCAL953X_INT_MASK + NBANK(chip));
|
|
if (ret) {
|
|
dev_err(dev, "Failed to sync INT mask registers: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca953x_suspend(struct device *dev)
|
|
{
|
|
struct pca953x_chip *chip = dev_get_drvdata(dev);
|
|
|
|
regcache_cache_only(chip->regmap, true);
|
|
|
|
if (atomic_read(&chip->wakeup_path))
|
|
device_set_wakeup_path(dev);
|
|
else
|
|
regulator_disable(chip->regulator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pca953x_resume(struct device *dev)
|
|
{
|
|
struct pca953x_chip *chip = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
if (!atomic_read(&chip->wakeup_path)) {
|
|
ret = regulator_enable(chip->regulator);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable regulator: %d\n", ret);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
regcache_cache_only(chip->regmap, false);
|
|
regcache_mark_dirty(chip->regmap);
|
|
ret = pca953x_regcache_sync(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regcache_sync(chip->regmap);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to restore register map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* convenience to stop overlong match-table lines */
|
|
#define OF_953X(__nrgpio, __int) (void *)(__nrgpio | PCA953X_TYPE | __int)
|
|
#define OF_957X(__nrgpio, __int) (void *)(__nrgpio | PCA957X_TYPE | __int)
|
|
|
|
static const struct of_device_id pca953x_dt_ids[] = {
|
|
{ .compatible = "nxp,pca6416", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "nxp,pca9505", .data = OF_953X(40, PCA_INT), },
|
|
{ .compatible = "nxp,pca9534", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "nxp,pca9535", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "nxp,pca9536", .data = OF_953X( 4, 0), },
|
|
{ .compatible = "nxp,pca9537", .data = OF_953X( 4, PCA_INT), },
|
|
{ .compatible = "nxp,pca9538", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "nxp,pca9539", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "nxp,pca9554", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "nxp,pca9555", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "nxp,pca9556", .data = OF_953X( 8, 0), },
|
|
{ .compatible = "nxp,pca9557", .data = OF_953X( 8, 0), },
|
|
{ .compatible = "nxp,pca9574", .data = OF_957X( 8, PCA_INT), },
|
|
{ .compatible = "nxp,pca9575", .data = OF_957X(16, PCA_INT), },
|
|
{ .compatible = "nxp,pca9698", .data = OF_953X(40, 0), },
|
|
|
|
{ .compatible = "nxp,pcal6416", .data = OF_953X(16, PCA_LATCH_INT), },
|
|
{ .compatible = "nxp,pcal6524", .data = OF_953X(24, PCA_LATCH_INT), },
|
|
{ .compatible = "nxp,pcal9535", .data = OF_953X(16, PCA_LATCH_INT), },
|
|
{ .compatible = "nxp,pcal9555a", .data = OF_953X(16, PCA_LATCH_INT), },
|
|
|
|
{ .compatible = "maxim,max7310", .data = OF_953X( 8, 0), },
|
|
{ .compatible = "maxim,max7312", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "maxim,max7313", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "maxim,max7315", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "maxim,max7318", .data = OF_953X(16, PCA_INT), },
|
|
|
|
{ .compatible = "ti,pca6107", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "ti,pca9536", .data = OF_953X( 4, 0), },
|
|
{ .compatible = "ti,tca6408", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "ti,tca6416", .data = OF_953X(16, PCA_INT), },
|
|
{ .compatible = "ti,tca6424", .data = OF_953X(24, PCA_INT), },
|
|
{ .compatible = "ti,tca9539", .data = OF_953X(16, PCA_INT), },
|
|
|
|
{ .compatible = "onnn,cat9554", .data = OF_953X( 8, PCA_INT), },
|
|
{ .compatible = "onnn,pca9654", .data = OF_953X( 8, PCA_INT), },
|
|
|
|
{ .compatible = "exar,xra1202", .data = OF_953X( 8, 0), },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, pca953x_dt_ids);
|
|
|
|
static SIMPLE_DEV_PM_OPS(pca953x_pm_ops, pca953x_suspend, pca953x_resume);
|
|
|
|
static struct i2c_driver pca953x_driver = {
|
|
.driver = {
|
|
.name = "pca953x",
|
|
.pm = &pca953x_pm_ops,
|
|
.of_match_table = pca953x_dt_ids,
|
|
.acpi_match_table = pca953x_acpi_ids,
|
|
},
|
|
.probe = pca953x_probe,
|
|
.remove = pca953x_remove,
|
|
.id_table = pca953x_id,
|
|
};
|
|
|
|
static int __init pca953x_init(void)
|
|
{
|
|
return i2c_add_driver(&pca953x_driver);
|
|
}
|
|
/* register after i2c postcore initcall and before
|
|
* subsys initcalls that may rely on these GPIOs
|
|
*/
|
|
subsys_initcall(pca953x_init);
|
|
|
|
static void __exit pca953x_exit(void)
|
|
{
|
|
i2c_del_driver(&pca953x_driver);
|
|
}
|
|
module_exit(pca953x_exit);
|
|
|
|
MODULE_AUTHOR("eric miao <eric.miao@marvell.com>");
|
|
MODULE_DESCRIPTION("GPIO expander driver for PCA953x");
|
|
MODULE_LICENSE("GPL");
|