forked from Minki/linux
c3059be16c
The qdisc supports two operations - plug and unplug. When the qdisc receives a plug command via netlink request, packets arriving henceforth are buffered until a corresponding unplug command is received. Depending on the type of unplug command, the queue can be unplugged indefinitely or selectively. This qdisc can be used to implement output buffering, an essential functionality required for consistent recovery in checkpoint based fault-tolerance systems. Output buffering enables speculative execution by allowing generated network traffic to be rolled back. It is used to provide network protection for Xen Guests in the Remus high availability project, available as part of Xen. This module is generic enough to be used by any other system that wishes to add speculative execution and output buffering to its applications. This module was originally available in the linux 2.6.32 PV-OPS tree, used as dom0 for Xen. For more information, please refer to http://nss.cs.ubc.ca/remus/ and http://wiki.xensource.com/xenwiki/Remus Changes in V3: * Removed debug output (printk) on queue overflow * Added TCQ_PLUG_RELEASE_INDEFINITE - that allows the user to use this qdisc, for simple plug/unplug operations. * Use of packet counts instead of pointers to keep track of the buffers in the queue. Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca> Signed-off-by: Brendan Cully <brendan@cs.ubc.ca> [author of the code in the linux 2.6.32 pvops tree] Signed-off-by: David S. Miller <davem@davemloft.net>
612 lines
19 KiB
Plaintext
612 lines
19 KiB
Plaintext
#
|
|
# Traffic control configuration.
|
|
#
|
|
|
|
menuconfig NET_SCHED
|
|
bool "QoS and/or fair queueing"
|
|
select NET_SCH_FIFO
|
|
---help---
|
|
When the kernel has several packets to send out over a network
|
|
device, it has to decide which ones to send first, which ones to
|
|
delay, and which ones to drop. This is the job of the queueing
|
|
disciplines, several different algorithms for how to do this
|
|
"fairly" have been proposed.
|
|
|
|
If you say N here, you will get the standard packet scheduler, which
|
|
is a FIFO (first come, first served). If you say Y here, you will be
|
|
able to choose from among several alternative algorithms which can
|
|
then be attached to different network devices. This is useful for
|
|
example if some of your network devices are real time devices that
|
|
need a certain minimum data flow rate, or if you need to limit the
|
|
maximum data flow rate for traffic which matches specified criteria.
|
|
This code is considered to be experimental.
|
|
|
|
To administer these schedulers, you'll need the user-level utilities
|
|
from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
|
|
That package also contains some documentation; for more, check out
|
|
<http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2>.
|
|
|
|
This Quality of Service (QoS) support will enable you to use
|
|
Differentiated Services (diffserv) and Resource Reservation Protocol
|
|
(RSVP) on your Linux router if you also say Y to the corresponding
|
|
classifiers below. Documentation and software is at
|
|
<http://diffserv.sourceforge.net/>.
|
|
|
|
If you say Y here and to "/proc file system" below, you will be able
|
|
to read status information about packet schedulers from the file
|
|
/proc/net/psched.
|
|
|
|
The available schedulers are listed in the following questions; you
|
|
can say Y to as many as you like. If unsure, say N now.
|
|
|
|
if NET_SCHED
|
|
|
|
comment "Queueing/Scheduling"
|
|
|
|
config NET_SCH_CBQ
|
|
tristate "Class Based Queueing (CBQ)"
|
|
---help---
|
|
Say Y here if you want to use the Class-Based Queueing (CBQ) packet
|
|
scheduling algorithm. This algorithm classifies the waiting packets
|
|
into a tree-like hierarchy of classes; the leaves of this tree are
|
|
in turn scheduled by separate algorithms.
|
|
|
|
See the top of <file:net/sched/sch_cbq.c> for more details.
|
|
|
|
CBQ is a commonly used scheduler, so if you're unsure, you should
|
|
say Y here. Then say Y to all the queueing algorithms below that you
|
|
want to use as leaf disciplines.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_cbq.
|
|
|
|
config NET_SCH_HTB
|
|
tristate "Hierarchical Token Bucket (HTB)"
|
|
---help---
|
|
Say Y here if you want to use the Hierarchical Token Buckets (HTB)
|
|
packet scheduling algorithm. See
|
|
<http://luxik.cdi.cz/~devik/qos/htb/> for complete manual and
|
|
in-depth articles.
|
|
|
|
HTB is very similar to CBQ regarding its goals however is has
|
|
different properties and different algorithm.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_htb.
|
|
|
|
config NET_SCH_HFSC
|
|
tristate "Hierarchical Fair Service Curve (HFSC)"
|
|
---help---
|
|
Say Y here if you want to use the Hierarchical Fair Service Curve
|
|
(HFSC) packet scheduling algorithm.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_hfsc.
|
|
|
|
config NET_SCH_ATM
|
|
tristate "ATM Virtual Circuits (ATM)"
|
|
depends on ATM
|
|
---help---
|
|
Say Y here if you want to use the ATM pseudo-scheduler. This
|
|
provides a framework for invoking classifiers, which in turn
|
|
select classes of this queuing discipline. Each class maps
|
|
the flow(s) it is handling to a given virtual circuit.
|
|
|
|
See the top of <file:net/sched/sch_atm.c> for more details.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_atm.
|
|
|
|
config NET_SCH_PRIO
|
|
tristate "Multi Band Priority Queueing (PRIO)"
|
|
---help---
|
|
Say Y here if you want to use an n-band priority queue packet
|
|
scheduler.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_prio.
|
|
|
|
config NET_SCH_MULTIQ
|
|
tristate "Hardware Multiqueue-aware Multi Band Queuing (MULTIQ)"
|
|
---help---
|
|
Say Y here if you want to use an n-band queue packet scheduler
|
|
to support devices that have multiple hardware transmit queues.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_multiq.
|
|
|
|
config NET_SCH_RED
|
|
tristate "Random Early Detection (RED)"
|
|
---help---
|
|
Say Y here if you want to use the Random Early Detection (RED)
|
|
packet scheduling algorithm.
|
|
|
|
See the top of <file:net/sched/sch_red.c> for more details.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_red.
|
|
|
|
config NET_SCH_SFB
|
|
tristate "Stochastic Fair Blue (SFB)"
|
|
---help---
|
|
Say Y here if you want to use the Stochastic Fair Blue (SFB)
|
|
packet scheduling algorithm.
|
|
|
|
See the top of <file:net/sched/sch_sfb.c> for more details.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_sfb.
|
|
|
|
config NET_SCH_SFQ
|
|
tristate "Stochastic Fairness Queueing (SFQ)"
|
|
---help---
|
|
Say Y here if you want to use the Stochastic Fairness Queueing (SFQ)
|
|
packet scheduling algorithm.
|
|
|
|
See the top of <file:net/sched/sch_sfq.c> for more details.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_sfq.
|
|
|
|
config NET_SCH_TEQL
|
|
tristate "True Link Equalizer (TEQL)"
|
|
---help---
|
|
Say Y here if you want to use the True Link Equalizer (TLE) packet
|
|
scheduling algorithm. This queueing discipline allows the combination
|
|
of several physical devices into one virtual device.
|
|
|
|
See the top of <file:net/sched/sch_teql.c> for more details.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_teql.
|
|
|
|
config NET_SCH_TBF
|
|
tristate "Token Bucket Filter (TBF)"
|
|
---help---
|
|
Say Y here if you want to use the Token Bucket Filter (TBF) packet
|
|
scheduling algorithm.
|
|
|
|
See the top of <file:net/sched/sch_tbf.c> for more details.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_tbf.
|
|
|
|
config NET_SCH_GRED
|
|
tristate "Generic Random Early Detection (GRED)"
|
|
---help---
|
|
Say Y here if you want to use the Generic Random Early Detection
|
|
(GRED) packet scheduling algorithm for some of your network devices
|
|
(see the top of <file:net/sched/sch_red.c> for details and
|
|
references about the algorithm).
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_gred.
|
|
|
|
config NET_SCH_DSMARK
|
|
tristate "Differentiated Services marker (DSMARK)"
|
|
---help---
|
|
Say Y if you want to schedule packets according to the
|
|
Differentiated Services architecture proposed in RFC 2475.
|
|
Technical information on this method, with pointers to associated
|
|
RFCs, is available at <http://www.gta.ufrj.br/diffserv/>.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_dsmark.
|
|
|
|
config NET_SCH_NETEM
|
|
tristate "Network emulator (NETEM)"
|
|
---help---
|
|
Say Y if you want to emulate network delay, loss, and packet
|
|
re-ordering. This is often useful to simulate networks when
|
|
testing applications or protocols.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called sch_netem.
|
|
|
|
If unsure, say N.
|
|
|
|
config NET_SCH_DRR
|
|
tristate "Deficit Round Robin scheduler (DRR)"
|
|
help
|
|
Say Y here if you want to use the Deficit Round Robin (DRR) packet
|
|
scheduling algorithm.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called sch_drr.
|
|
|
|
If unsure, say N.
|
|
|
|
config NET_SCH_MQPRIO
|
|
tristate "Multi-queue priority scheduler (MQPRIO)"
|
|
help
|
|
Say Y here if you want to use the Multi-queue Priority scheduler.
|
|
This scheduler allows QOS to be offloaded on NICs that have support
|
|
for offloading QOS schedulers.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called sch_mqprio.
|
|
|
|
If unsure, say N.
|
|
|
|
config NET_SCH_CHOKE
|
|
tristate "CHOose and Keep responsive flow scheduler (CHOKE)"
|
|
help
|
|
Say Y here if you want to use the CHOKe packet scheduler (CHOose
|
|
and Keep for responsive flows, CHOose and Kill for unresponsive
|
|
flows). This is a variation of RED which trys to penalize flows
|
|
that monopolize the queue.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_choke.
|
|
|
|
config NET_SCH_QFQ
|
|
tristate "Quick Fair Queueing scheduler (QFQ)"
|
|
help
|
|
Say Y here if you want to use the Quick Fair Queueing Scheduler (QFQ)
|
|
packet scheduling algorithm.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called sch_qfq.
|
|
|
|
If unsure, say N.
|
|
|
|
config NET_SCH_INGRESS
|
|
tristate "Ingress Qdisc"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here if you want to use classifiers for incoming packets.
|
|
If unsure, say Y.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_ingress.
|
|
|
|
config NET_SCH_PLUG
|
|
tristate "Plug network traffic until release (PLUG)"
|
|
---help---
|
|
|
|
This queuing discipline allows userspace to plug/unplug a network
|
|
output queue, using the netlink interface. When it receives an
|
|
enqueue command it inserts a plug into the outbound queue that
|
|
causes following packets to enqueue until a dequeue command arrives
|
|
over netlink, causing the plug to be removed and resuming the normal
|
|
packet flow.
|
|
|
|
This module also provides a generic "network output buffering"
|
|
functionality (aka output commit), wherein upon arrival of a dequeue
|
|
command, only packets up to the first plug are released for delivery.
|
|
The Remus HA project uses this module to enable speculative execution
|
|
of virtual machines by allowing the generated network output to be rolled
|
|
back if needed.
|
|
|
|
For more information, please refer to http://wiki.xensource.com/xenwiki/Remus
|
|
|
|
Say Y here if you are using this kernel for Xen dom0 and
|
|
want to protect Xen guests with Remus.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called sch_plug.
|
|
|
|
comment "Classification"
|
|
|
|
config NET_CLS
|
|
boolean
|
|
|
|
config NET_CLS_BASIC
|
|
tristate "Elementary classification (BASIC)"
|
|
select NET_CLS
|
|
---help---
|
|
Say Y here if you want to be able to classify packets using
|
|
only extended matches and actions.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_basic.
|
|
|
|
config NET_CLS_TCINDEX
|
|
tristate "Traffic-Control Index (TCINDEX)"
|
|
select NET_CLS
|
|
---help---
|
|
Say Y here if you want to be able to classify packets based on
|
|
traffic control indices. You will want this feature if you want
|
|
to implement Differentiated Services together with DSMARK.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_tcindex.
|
|
|
|
config NET_CLS_ROUTE4
|
|
tristate "Routing decision (ROUTE)"
|
|
depends on INET
|
|
select IP_ROUTE_CLASSID
|
|
select NET_CLS
|
|
---help---
|
|
If you say Y here, you will be able to classify packets
|
|
according to the route table entry they matched.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_route.
|
|
|
|
config NET_CLS_FW
|
|
tristate "Netfilter mark (FW)"
|
|
select NET_CLS
|
|
---help---
|
|
If you say Y here, you will be able to classify packets
|
|
according to netfilter/firewall marks.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_fw.
|
|
|
|
config NET_CLS_U32
|
|
tristate "Universal 32bit comparisons w/ hashing (U32)"
|
|
select NET_CLS
|
|
---help---
|
|
Say Y here to be able to classify packets using a universal
|
|
32bit pieces based comparison scheme.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_u32.
|
|
|
|
config CLS_U32_PERF
|
|
bool "Performance counters support"
|
|
depends on NET_CLS_U32
|
|
---help---
|
|
Say Y here to make u32 gather additional statistics useful for
|
|
fine tuning u32 classifiers.
|
|
|
|
config CLS_U32_MARK
|
|
bool "Netfilter marks support"
|
|
depends on NET_CLS_U32
|
|
---help---
|
|
Say Y here to be able to use netfilter marks as u32 key.
|
|
|
|
config NET_CLS_RSVP
|
|
tristate "IPv4 Resource Reservation Protocol (RSVP)"
|
|
select NET_CLS
|
|
---help---
|
|
The Resource Reservation Protocol (RSVP) permits end systems to
|
|
request a minimum and maximum data flow rate for a connection; this
|
|
is important for real time data such as streaming sound or video.
|
|
|
|
Say Y here if you want to be able to classify outgoing packets based
|
|
on their RSVP requests.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_rsvp.
|
|
|
|
config NET_CLS_RSVP6
|
|
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
|
|
select NET_CLS
|
|
---help---
|
|
The Resource Reservation Protocol (RSVP) permits end systems to
|
|
request a minimum and maximum data flow rate for a connection; this
|
|
is important for real time data such as streaming sound or video.
|
|
|
|
Say Y here if you want to be able to classify outgoing packets based
|
|
on their RSVP requests and you are using the IPv6 protocol.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_rsvp6.
|
|
|
|
config NET_CLS_FLOW
|
|
tristate "Flow classifier"
|
|
select NET_CLS
|
|
---help---
|
|
If you say Y here, you will be able to classify packets based on
|
|
a configurable combination of packet keys. This is mostly useful
|
|
in combination with SFQ.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_flow.
|
|
|
|
config NET_CLS_CGROUP
|
|
tristate "Control Group Classifier"
|
|
select NET_CLS
|
|
depends on CGROUPS
|
|
---help---
|
|
Say Y here if you want to classify packets based on the control
|
|
cgroup of their process.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called cls_cgroup.
|
|
|
|
config NET_EMATCH
|
|
bool "Extended Matches"
|
|
select NET_CLS
|
|
---help---
|
|
Say Y here if you want to use extended matches on top of classifiers
|
|
and select the extended matches below.
|
|
|
|
Extended matches are small classification helpers not worth writing
|
|
a separate classifier for.
|
|
|
|
A recent version of the iproute2 package is required to use
|
|
extended matches.
|
|
|
|
config NET_EMATCH_STACK
|
|
int "Stack size"
|
|
depends on NET_EMATCH
|
|
default "32"
|
|
---help---
|
|
Size of the local stack variable used while evaluating the tree of
|
|
ematches. Limits the depth of the tree, i.e. the number of
|
|
encapsulated precedences. Every level requires 4 bytes of additional
|
|
stack space.
|
|
|
|
config NET_EMATCH_CMP
|
|
tristate "Simple packet data comparison"
|
|
depends on NET_EMATCH
|
|
---help---
|
|
Say Y here if you want to be able to classify packets based on
|
|
simple packet data comparisons for 8, 16, and 32bit values.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called em_cmp.
|
|
|
|
config NET_EMATCH_NBYTE
|
|
tristate "Multi byte comparison"
|
|
depends on NET_EMATCH
|
|
---help---
|
|
Say Y here if you want to be able to classify packets based on
|
|
multiple byte comparisons mainly useful for IPv6 address comparisons.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called em_nbyte.
|
|
|
|
config NET_EMATCH_U32
|
|
tristate "U32 key"
|
|
depends on NET_EMATCH
|
|
---help---
|
|
Say Y here if you want to be able to classify packets using
|
|
the famous u32 key in combination with logic relations.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called em_u32.
|
|
|
|
config NET_EMATCH_META
|
|
tristate "Metadata"
|
|
depends on NET_EMATCH
|
|
---help---
|
|
Say Y here if you want to be able to classify packets based on
|
|
metadata such as load average, netfilter attributes, socket
|
|
attributes and routing decisions.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called em_meta.
|
|
|
|
config NET_EMATCH_TEXT
|
|
tristate "Textsearch"
|
|
depends on NET_EMATCH
|
|
select TEXTSEARCH
|
|
select TEXTSEARCH_KMP
|
|
select TEXTSEARCH_BM
|
|
select TEXTSEARCH_FSM
|
|
---help---
|
|
Say Y here if you want to be able to classify packets based on
|
|
textsearch comparisons.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called em_text.
|
|
|
|
config NET_CLS_ACT
|
|
bool "Actions"
|
|
---help---
|
|
Say Y here if you want to use traffic control actions. Actions
|
|
get attached to classifiers and are invoked after a successful
|
|
classification. They are used to overwrite the classification
|
|
result, instantly drop or redirect packets, etc.
|
|
|
|
A recent version of the iproute2 package is required to use
|
|
extended matches.
|
|
|
|
config NET_ACT_POLICE
|
|
tristate "Traffic Policing"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here if you want to do traffic policing, i.e. strict
|
|
bandwidth limiting. This action replaces the existing policing
|
|
module.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_police.
|
|
|
|
config NET_ACT_GACT
|
|
tristate "Generic actions"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here to take generic actions such as dropping and
|
|
accepting packets.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_gact.
|
|
|
|
config GACT_PROB
|
|
bool "Probability support"
|
|
depends on NET_ACT_GACT
|
|
---help---
|
|
Say Y here to use the generic action randomly or deterministically.
|
|
|
|
config NET_ACT_MIRRED
|
|
tristate "Redirecting and Mirroring"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here to allow packets to be mirrored or redirected to
|
|
other devices.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_mirred.
|
|
|
|
config NET_ACT_IPT
|
|
tristate "IPtables targets"
|
|
depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
|
|
---help---
|
|
Say Y here to be able to invoke iptables targets after successful
|
|
classification.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_ipt.
|
|
|
|
config NET_ACT_NAT
|
|
tristate "Stateless NAT"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here to do stateless NAT on IPv4 packets. You should use
|
|
netfilter for NAT unless you know what you are doing.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_nat.
|
|
|
|
config NET_ACT_PEDIT
|
|
tristate "Packet Editing"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here if you want to mangle the content of packets.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_pedit.
|
|
|
|
config NET_ACT_SIMP
|
|
tristate "Simple Example (Debug)"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here to add a simple action for demonstration purposes.
|
|
It is meant as an example and for debugging purposes. It will
|
|
print a configured policy string followed by the packet count
|
|
to the console for every packet that passes by.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_simple.
|
|
|
|
config NET_ACT_SKBEDIT
|
|
tristate "SKB Editing"
|
|
depends on NET_CLS_ACT
|
|
---help---
|
|
Say Y here to change skb priority or queue_mapping settings.
|
|
|
|
If unsure, say N.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_skbedit.
|
|
|
|
config NET_ACT_CSUM
|
|
tristate "Checksum Updating"
|
|
depends on NET_CLS_ACT && INET
|
|
---help---
|
|
Say Y here to update some common checksum after some direct
|
|
packet alterations.
|
|
|
|
To compile this code as a module, choose M here: the
|
|
module will be called act_csum.
|
|
|
|
config NET_CLS_IND
|
|
bool "Incoming device classification"
|
|
depends on NET_CLS_U32 || NET_CLS_FW
|
|
---help---
|
|
Say Y here to extend the u32 and fw classifier to support
|
|
classification based on the incoming device. This option is
|
|
likely to disappear in favour of the metadata ematch.
|
|
|
|
endif # NET_SCHED
|
|
|
|
config NET_SCH_FIFO
|
|
bool
|