forked from Minki/linux
1eae4eb2a1
L1 ASPM link (pci-e link power savings) has significant benefits (~1W savings when link is active) but unfortunately does not work correctly on any of the chipsets that have 82573 on mobile platforms which causes various nuisances: - eeprom reads return garbage information leading to bad eeprom checksums - long ping times (up to 2 seconds) - complete system hangs (freeze/lockup) A lot of T60 owners have been plagued by this, but other mobile solutions also suffer from these symptoms. Disabling L1 ASPM before we activate the PCI-E link fixes all of these issues at the cost of some power consumption. Remove a workaround RDTR adjustment that is no longer needed with this new one. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
377 lines
10 KiB
C
377 lines
10 KiB
C
/*******************************************************************************
|
|
|
|
Intel PRO/1000 Linux driver
|
|
Copyright(c) 1999 - 2007 Intel Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify it
|
|
under the terms and conditions of the GNU General Public License,
|
|
version 2, as published by the Free Software Foundation.
|
|
|
|
This program is distributed in the hope it will be useful, but WITHOUT
|
|
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
more details.
|
|
|
|
You should have received a copy of the GNU General Public License along with
|
|
this program; if not, write to the Free Software Foundation, Inc.,
|
|
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
The full GNU General Public License is included in this distribution in
|
|
the file called "COPYING".
|
|
|
|
Contact Information:
|
|
Linux NICS <linux.nics@intel.com>
|
|
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
|
|
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
|
|
*******************************************************************************/
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include "e1000.h"
|
|
|
|
/* This is the only thing that needs to be changed to adjust the
|
|
* maximum number of ports that the driver can manage.
|
|
*/
|
|
|
|
#define E1000_MAX_NIC 32
|
|
|
|
#define OPTION_UNSET -1
|
|
#define OPTION_DISABLED 0
|
|
#define OPTION_ENABLED 1
|
|
|
|
#define COPYBREAK_DEFAULT 256
|
|
unsigned int copybreak = COPYBREAK_DEFAULT;
|
|
module_param(copybreak, uint, 0644);
|
|
MODULE_PARM_DESC(copybreak,
|
|
"Maximum size of packet that is copied to a new buffer on receive");
|
|
|
|
/* All parameters are treated the same, as an integer array of values.
|
|
* This macro just reduces the need to repeat the same declaration code
|
|
* over and over (plus this helps to avoid typo bugs).
|
|
*/
|
|
|
|
#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
|
|
#define E1000_PARAM(X, desc) \
|
|
static int __devinitdata X[E1000_MAX_NIC+1] \
|
|
= E1000_PARAM_INIT; \
|
|
static unsigned int num_##X; \
|
|
module_param_array_named(X, X, int, &num_##X, 0); \
|
|
MODULE_PARM_DESC(X, desc);
|
|
|
|
|
|
/* Transmit Interrupt Delay in units of 1.024 microseconds
|
|
* Tx interrupt delay needs to typically be set to something non zero
|
|
*
|
|
* Valid Range: 0-65535
|
|
*/
|
|
E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
|
|
#define DEFAULT_TIDV 8
|
|
#define MAX_TXDELAY 0xFFFF
|
|
#define MIN_TXDELAY 0
|
|
|
|
/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
|
|
*
|
|
* Valid Range: 0-65535
|
|
*/
|
|
E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
|
|
#define DEFAULT_TADV 32
|
|
#define MAX_TXABSDELAY 0xFFFF
|
|
#define MIN_TXABSDELAY 0
|
|
|
|
/* Receive Interrupt Delay in units of 1.024 microseconds
|
|
* hardware will likely hang if you set this to anything but zero.
|
|
*
|
|
* Valid Range: 0-65535
|
|
*/
|
|
E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
|
|
#define DEFAULT_RDTR 0
|
|
#define MAX_RXDELAY 0xFFFF
|
|
#define MIN_RXDELAY 0
|
|
|
|
/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
|
|
*
|
|
* Valid Range: 0-65535
|
|
*/
|
|
E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
|
|
#define DEFAULT_RADV 8
|
|
#define MAX_RXABSDELAY 0xFFFF
|
|
#define MIN_RXABSDELAY 0
|
|
|
|
/* Interrupt Throttle Rate (interrupts/sec)
|
|
*
|
|
* Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
|
|
*/
|
|
E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
|
|
#define DEFAULT_ITR 3
|
|
#define MAX_ITR 100000
|
|
#define MIN_ITR 100
|
|
|
|
/* Enable Smart Power Down of the PHY
|
|
*
|
|
* Valid Range: 0, 1
|
|
*
|
|
* Default Value: 0 (disabled)
|
|
*/
|
|
E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
|
|
|
|
/* Enable Kumeran Lock Loss workaround
|
|
*
|
|
* Valid Range: 0, 1
|
|
*
|
|
* Default Value: 1 (enabled)
|
|
*/
|
|
E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
|
|
|
|
struct e1000_option {
|
|
enum { enable_option, range_option, list_option } type;
|
|
const char *name;
|
|
const char *err;
|
|
int def;
|
|
union {
|
|
struct { /* range_option info */
|
|
int min;
|
|
int max;
|
|
} r;
|
|
struct { /* list_option info */
|
|
int nr;
|
|
struct e1000_opt_list { int i; char *str; } *p;
|
|
} l;
|
|
} arg;
|
|
};
|
|
|
|
static int __devinit e1000_validate_option(unsigned int *value,
|
|
const struct e1000_option *opt,
|
|
struct e1000_adapter *adapter)
|
|
{
|
|
if (*value == OPTION_UNSET) {
|
|
*value = opt->def;
|
|
return 0;
|
|
}
|
|
|
|
switch (opt->type) {
|
|
case enable_option:
|
|
switch (*value) {
|
|
case OPTION_ENABLED:
|
|
ndev_info(adapter->netdev, "%s Enabled\n", opt->name);
|
|
return 0;
|
|
case OPTION_DISABLED:
|
|
ndev_info(adapter->netdev, "%s Disabled\n", opt->name);
|
|
return 0;
|
|
}
|
|
break;
|
|
case range_option:
|
|
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
|
|
ndev_info(adapter->netdev,
|
|
"%s set to %i\n", opt->name, *value);
|
|
return 0;
|
|
}
|
|
break;
|
|
case list_option: {
|
|
int i;
|
|
struct e1000_opt_list *ent;
|
|
|
|
for (i = 0; i < opt->arg.l.nr; i++) {
|
|
ent = &opt->arg.l.p[i];
|
|
if (*value == ent->i) {
|
|
if (ent->str[0] != '\0')
|
|
ndev_info(adapter->netdev, "%s\n",
|
|
ent->str);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n",
|
|
opt->name, *value, opt->err);
|
|
*value = opt->def;
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* e1000e_check_options - Range Checking for Command Line Parameters
|
|
* @adapter: board private structure
|
|
*
|
|
* This routine checks all command line parameters for valid user
|
|
* input. If an invalid value is given, or if no user specified
|
|
* value exists, a default value is used. The final value is stored
|
|
* in a variable in the adapter structure.
|
|
**/
|
|
void __devinit e1000e_check_options(struct e1000_adapter *adapter)
|
|
{
|
|
struct e1000_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
int bd = adapter->bd_number;
|
|
|
|
if (bd >= E1000_MAX_NIC) {
|
|
ndev_notice(netdev,
|
|
"Warning: no configuration for board #%i\n", bd);
|
|
ndev_notice(netdev, "Using defaults for all values\n");
|
|
}
|
|
|
|
{ /* Transmit Interrupt Delay */
|
|
const struct e1000_option opt = {
|
|
.type = range_option,
|
|
.name = "Transmit Interrupt Delay",
|
|
.err = "using default of "
|
|
__MODULE_STRING(DEFAULT_TIDV),
|
|
.def = DEFAULT_TIDV,
|
|
.arg = { .r = { .min = MIN_TXDELAY,
|
|
.max = MAX_TXDELAY } }
|
|
};
|
|
|
|
if (num_TxIntDelay > bd) {
|
|
adapter->tx_int_delay = TxIntDelay[bd];
|
|
e1000_validate_option(&adapter->tx_int_delay, &opt,
|
|
adapter);
|
|
} else {
|
|
adapter->tx_int_delay = opt.def;
|
|
}
|
|
}
|
|
{ /* Transmit Absolute Interrupt Delay */
|
|
const struct e1000_option opt = {
|
|
.type = range_option,
|
|
.name = "Transmit Absolute Interrupt Delay",
|
|
.err = "using default of "
|
|
__MODULE_STRING(DEFAULT_TADV),
|
|
.def = DEFAULT_TADV,
|
|
.arg = { .r = { .min = MIN_TXABSDELAY,
|
|
.max = MAX_TXABSDELAY } }
|
|
};
|
|
|
|
if (num_TxAbsIntDelay > bd) {
|
|
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
|
|
e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
|
|
adapter);
|
|
} else {
|
|
adapter->tx_abs_int_delay = opt.def;
|
|
}
|
|
}
|
|
{ /* Receive Interrupt Delay */
|
|
struct e1000_option opt = {
|
|
.type = range_option,
|
|
.name = "Receive Interrupt Delay",
|
|
.err = "using default of "
|
|
__MODULE_STRING(DEFAULT_RDTR),
|
|
.def = DEFAULT_RDTR,
|
|
.arg = { .r = { .min = MIN_RXDELAY,
|
|
.max = MAX_RXDELAY } }
|
|
};
|
|
|
|
if (num_RxIntDelay > bd) {
|
|
adapter->rx_int_delay = RxIntDelay[bd];
|
|
e1000_validate_option(&adapter->rx_int_delay, &opt,
|
|
adapter);
|
|
} else {
|
|
adapter->rx_int_delay = opt.def;
|
|
}
|
|
}
|
|
{ /* Receive Absolute Interrupt Delay */
|
|
const struct e1000_option opt = {
|
|
.type = range_option,
|
|
.name = "Receive Absolute Interrupt Delay",
|
|
.err = "using default of "
|
|
__MODULE_STRING(DEFAULT_RADV),
|
|
.def = DEFAULT_RADV,
|
|
.arg = { .r = { .min = MIN_RXABSDELAY,
|
|
.max = MAX_RXABSDELAY } }
|
|
};
|
|
|
|
if (num_RxAbsIntDelay > bd) {
|
|
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
|
|
e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
|
|
adapter);
|
|
} else {
|
|
adapter->rx_abs_int_delay = opt.def;
|
|
}
|
|
}
|
|
{ /* Interrupt Throttling Rate */
|
|
const struct e1000_option opt = {
|
|
.type = range_option,
|
|
.name = "Interrupt Throttling Rate (ints/sec)",
|
|
.err = "using default of "
|
|
__MODULE_STRING(DEFAULT_ITR),
|
|
.def = DEFAULT_ITR,
|
|
.arg = { .r = { .min = MIN_ITR,
|
|
.max = MAX_ITR } }
|
|
};
|
|
|
|
if (num_InterruptThrottleRate > bd) {
|
|
adapter->itr = InterruptThrottleRate[bd];
|
|
switch (adapter->itr) {
|
|
case 0:
|
|
ndev_info(netdev, "%s turned off\n",
|
|
opt.name);
|
|
break;
|
|
case 1:
|
|
ndev_info(netdev,
|
|
"%s set to dynamic mode\n",
|
|
opt.name);
|
|
adapter->itr_setting = adapter->itr;
|
|
adapter->itr = 20000;
|
|
break;
|
|
case 3:
|
|
ndev_info(netdev,
|
|
"%s set to dynamic conservative mode\n",
|
|
opt.name);
|
|
adapter->itr_setting = adapter->itr;
|
|
adapter->itr = 20000;
|
|
break;
|
|
default:
|
|
e1000_validate_option(&adapter->itr, &opt,
|
|
adapter);
|
|
/*
|
|
* save the setting, because the dynamic bits
|
|
* change itr. clear the lower two bits
|
|
* because they are used as control
|
|
*/
|
|
adapter->itr_setting = adapter->itr & ~3;
|
|
break;
|
|
}
|
|
} else {
|
|
adapter->itr_setting = opt.def;
|
|
adapter->itr = 20000;
|
|
}
|
|
}
|
|
{ /* Smart Power Down */
|
|
const struct e1000_option opt = {
|
|
.type = enable_option,
|
|
.name = "PHY Smart Power Down",
|
|
.err = "defaulting to Disabled",
|
|
.def = OPTION_DISABLED
|
|
};
|
|
|
|
if (num_SmartPowerDownEnable > bd) {
|
|
unsigned int spd = SmartPowerDownEnable[bd];
|
|
e1000_validate_option(&spd, &opt, adapter);
|
|
if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
|
|
&& spd)
|
|
adapter->flags |= FLAG_SMART_POWER_DOWN;
|
|
}
|
|
}
|
|
{ /* Kumeran Lock Loss Workaround */
|
|
const struct e1000_option opt = {
|
|
.type = enable_option,
|
|
.name = "Kumeran Lock Loss Workaround",
|
|
.err = "defaulting to Enabled",
|
|
.def = OPTION_ENABLED
|
|
};
|
|
|
|
if (num_KumeranLockLoss > bd) {
|
|
unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
|
|
e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
|
|
if (hw->mac.type == e1000_ich8lan)
|
|
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
|
|
kmrn_lock_loss);
|
|
} else {
|
|
if (hw->mac.type == e1000_ich8lan)
|
|
e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
|
|
opt.def);
|
|
}
|
|
}
|
|
}
|