forked from Minki/linux
2e927b7626
This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
331 lines
8.7 KiB
C
331 lines
8.7 KiB
C
/*
|
|
* arch/arm/mach-pxa/pcm990-baseboard.c
|
|
* Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
|
|
*
|
|
* Refer
|
|
* http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
|
|
* for additional hardware info
|
|
*
|
|
* Author: Juergen Kilb
|
|
* Created: April 05, 2005
|
|
* Copyright: Phytec Messtechnik GmbH
|
|
* e-Mail: armlinux@phytec.de
|
|
*
|
|
* based on Intel Mainstone Board
|
|
*
|
|
* Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ide.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/ohci.h>
|
|
#include <asm/arch/pcm990_baseboard.h>
|
|
|
|
/*
|
|
* The PCM-990 development baseboard uses PCM-027's hardeware in the
|
|
* following way:
|
|
*
|
|
* - LCD support is in use
|
|
* - GPIO16 is output for back light on/off with PWM
|
|
* - GPIO58 ... GPIO73 are outputs for display data
|
|
* - GPIO74 is output output for LCDFCLK
|
|
* - GPIO75 is output for LCDLCLK
|
|
* - GPIO76 is output for LCDPCLK
|
|
* - GPIO77 is output for LCDBIAS
|
|
* - MMC support is in use
|
|
* - GPIO32 is output for MMCCLK
|
|
* - GPIO92 is MMDAT0
|
|
* - GPIO109 is MMDAT1
|
|
* - GPIO110 is MMCS0
|
|
* - GPIO111 is MMCS1
|
|
* - GPIO112 is MMCMD
|
|
* - IDE/CF card is in use
|
|
* - GPIO48 is output /POE
|
|
* - GPIO49 is output /PWE
|
|
* - GPIO50 is output /PIOR
|
|
* - GPIO51 is output /PIOW
|
|
* - GPIO54 is output /PCE2
|
|
* - GPIO55 is output /PREG
|
|
* - GPIO56 is input /PWAIT
|
|
* - GPIO57 is output /PIOS16
|
|
* - GPIO79 is output PSKTSEL
|
|
* - GPIO85 is output /PCE1
|
|
* - FFUART is in use
|
|
* - GPIO34 is input FFRXD
|
|
* - GPIO35 is input FFCTS
|
|
* - GPIO36 is input FFDCD
|
|
* - GPIO37 is input FFDSR
|
|
* - GPIO38 is input FFRI
|
|
* - GPIO39 is output FFTXD
|
|
* - GPIO40 is output FFDTR
|
|
* - GPIO41 is output FFRTS
|
|
* - BTUART is in use
|
|
* - GPIO42 is input BTRXD
|
|
* - GPIO43 is output BTTXD
|
|
* - GPIO44 is input BTCTS
|
|
* - GPIO45 is output BTRTS
|
|
* - IRUART is in use
|
|
* - GPIO46 is input STDRXD
|
|
* - GPIO47 is output STDTXD
|
|
* - AC97 is in use*)
|
|
* - GPIO28 is input AC97CLK
|
|
* - GPIO29 is input AC97DatIn
|
|
* - GPIO30 is output AC97DatO
|
|
* - GPIO31 is output AC97SYNC
|
|
* - GPIO113 is output AC97_RESET
|
|
* - SSP is in use
|
|
* - GPIO23 is output SSPSCLK
|
|
* - GPIO24 is output chip select to Max7301
|
|
* - GPIO25 is output SSPTXD
|
|
* - GPIO26 is input SSPRXD
|
|
* - GPIO27 is input for Max7301 IRQ
|
|
* - GPIO53 is input SSPSYSCLK
|
|
* - SSP3 is in use
|
|
* - GPIO81 is output SSPTXD3
|
|
* - GPIO82 is input SSPRXD3
|
|
* - GPIO83 is output SSPSFRM
|
|
* - GPIO84 is output SSPCLK3
|
|
*
|
|
* Otherwise claimed GPIOs:
|
|
* GPIO1 -> IRQ from user switch
|
|
* GPIO9 -> IRQ from power management
|
|
* GPIO10 -> IRQ from WML9712 AC97 controller
|
|
* GPIO11 -> IRQ from IDE controller
|
|
* GPIO12 -> IRQ from CF controller
|
|
* GPIO13 -> IRQ from CF controller
|
|
* GPIO14 -> GPIO free
|
|
* GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
|
|
* GPIO19 -> GPIO free
|
|
* GPIO20 -> /SDCS2
|
|
* GPIO21 -> /CS3 PC card socket select
|
|
* GPIO33 -> /CS5 network controller select
|
|
* GPIO78 -> /CS2 (16 bit wide data path)
|
|
* GPIO80 -> /CS4 (16 bit wide data path)
|
|
* GPIO86 -> GPIO free
|
|
* GPIO87 -> GPIO free
|
|
* GPIO90 -> LED0 on CPU module
|
|
* GPIO91 -> LED1 on CPI module
|
|
* GPIO117 -> SCL
|
|
* GPIO118 -> SDA
|
|
*/
|
|
|
|
static unsigned long pcm990_irq_enabled;
|
|
|
|
static void pcm990_mask_ack_irq(unsigned int irq)
|
|
{
|
|
int pcm990_irq = (irq - PCM027_IRQ(0));
|
|
PCM990_INTMSKENA = (pcm990_irq_enabled &= ~(1 << pcm990_irq));
|
|
}
|
|
|
|
static void pcm990_unmask_irq(unsigned int irq)
|
|
{
|
|
int pcm990_irq = (irq - PCM027_IRQ(0));
|
|
/* the irq can be acknowledged only if deasserted, so it's done here */
|
|
PCM990_INTSETCLR |= 1 << pcm990_irq;
|
|
PCM990_INTMSKENA = (pcm990_irq_enabled |= (1 << pcm990_irq));
|
|
}
|
|
|
|
static struct irq_chip pcm990_irq_chip = {
|
|
.mask_ack = pcm990_mask_ack_irq,
|
|
.unmask = pcm990_unmask_irq,
|
|
};
|
|
|
|
static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
|
|
|
|
do {
|
|
GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
|
|
GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
|
|
if (likely(pending)) {
|
|
irq = PCM027_IRQ(0) + __ffs(pending);
|
|
desc = irq_desc + irq;
|
|
desc_handle_irq(irq, desc);
|
|
}
|
|
pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
|
|
} while (pending);
|
|
}
|
|
|
|
static void __init pcm990_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
/* setup extra PCM990 irqs */
|
|
for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
|
|
set_irq_chip(irq, &pcm990_irq_chip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
|
|
PCM990_INTMSKENA = 0x00; /* disable all Interrupts */
|
|
PCM990_INTSETCLR = 0xFF;
|
|
|
|
set_irq_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
|
|
set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
|
|
}
|
|
|
|
static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
|
|
void *data)
|
|
{
|
|
int err;
|
|
|
|
/*
|
|
* enable GPIO for PXA27x MMC controller
|
|
*/
|
|
pxa_gpio_mode(GPIO32_MMCCLK_MD);
|
|
pxa_gpio_mode(GPIO112_MMCCMD_MD);
|
|
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
|
|
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
|
|
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
|
|
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
|
|
|
|
err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
|
|
"MMC card detect", data);
|
|
if (err)
|
|
printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
|
|
"card detect IRQ\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static void pcm990_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
struct pxamci_platform_data *p_d = dev->platform_data;
|
|
|
|
if ((1 << vdd) & p_d->ocr_mask)
|
|
__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
|
|
PCM990_CTRL_MMC2PWR;
|
|
else
|
|
__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5) =
|
|
~PCM990_CTRL_MMC2PWR;
|
|
}
|
|
|
|
static void pcm990_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(PCM027_MMCDET_IRQ, data);
|
|
}
|
|
|
|
#define MSECS_PER_JIFFY (1000/HZ)
|
|
|
|
static struct pxamci_platform_data pcm990_mci_platform_data = {
|
|
.detect_delay = 250 / MSECS_PER_JIFFY,
|
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.init = pcm990_mci_init,
|
|
.setpower = pcm990_mci_setpower,
|
|
.exit = pcm990_mci_exit,
|
|
};
|
|
|
|
/*
|
|
* init OHCI hardware to work with
|
|
*
|
|
* Note: Only USB port 1 (host only) is connected
|
|
*
|
|
* GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
|
|
* GPIO89 (USBHPEN#1): power-on out, on when low
|
|
*/
|
|
static int pcm990_ohci_init(struct device *dev)
|
|
{
|
|
pxa_gpio_mode(PCM990_USB_OVERCURRENT);
|
|
pxa_gpio_mode(PCM990_USB_PWR_EN);
|
|
/*
|
|
* disable USB port 2 and 3
|
|
* power sense is active low
|
|
*/
|
|
UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
|
|
UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
|
|
/*
|
|
* wait 10ms after Power on
|
|
* overcurrent per port
|
|
* power switch per port
|
|
*/
|
|
UHCRHDA = (5<<24) | (1<<11) | (1<<8); /* FIXME: Required? */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.init = pcm990_ohci_init,
|
|
.exit = NULL,
|
|
};
|
|
|
|
/*
|
|
* AC97 support
|
|
* Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
|
|
*/
|
|
static struct resource pxa27x_ac97_resources[] = {
|
|
[0] = {
|
|
.start = 0x40500000,
|
|
.end = 0x40500000 + 0xfff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_AC97,
|
|
.end = IRQ_AC97,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static u64 pxa_ac97_dmamask = 0xffffffffUL;
|
|
|
|
static struct platform_device pxa27x_device_ac97 = {
|
|
.name = "pxa2xx-ac97",
|
|
.id = -1,
|
|
.dev = {
|
|
.dma_mask = &pxa_ac97_dmamask,
|
|
.coherent_dma_mask = 0xffffffff,
|
|
},
|
|
.num_resources = ARRAY_SIZE(pxa27x_ac97_resources),
|
|
.resource = pxa27x_ac97_resources,
|
|
};
|
|
|
|
/*
|
|
* enable generic access to the base board control CPLDs U6 and U7
|
|
*/
|
|
static struct map_desc pcm990_io_desc[] __initdata = {
|
|
{
|
|
.virtual = PCM990_CTRL_BASE,
|
|
.pfn = __phys_to_pfn(PCM990_CTRL_PHYS),
|
|
.length = PCM990_CTRL_SIZE,
|
|
.type = MT_DEVICE /* CPLD */
|
|
}, {
|
|
.virtual = PCM990_CF_PLD_BASE,
|
|
.pfn = __phys_to_pfn(PCM990_CF_PLD_PHYS),
|
|
.length = PCM990_CF_PLD_SIZE,
|
|
.type = MT_DEVICE /* CPLD */
|
|
}
|
|
};
|
|
|
|
/*
|
|
* system init for baseboard usage. Will be called by pcm027 init.
|
|
*
|
|
* Add platform devices present on this baseboard and init
|
|
* them from CPU side as far as required to use them later on
|
|
*/
|
|
void __init pcm990_baseboard_init(void)
|
|
{
|
|
/* register CPLD access */
|
|
iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
|
|
|
|
/* register CPLD's IRQ controller */
|
|
pcm990_init_irq();
|
|
|
|
platform_device_register(&pxa27x_device_ac97);
|
|
|
|
/* MMC */
|
|
pxa_set_mci_info(&pcm990_mci_platform_data);
|
|
|
|
/* USB host */
|
|
pxa_set_ohci_info(&pcm990_ohci_platform_data);
|
|
|
|
printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
|
|
}
|