forked from Minki/linux
85ecd0322b
[Description written by Alan Stern] Soeren tracked down a very difficult bug in ehci-hcd's DMA pool management of iTD and siTD structures. Some background: ehci-hcd gives each isochronous endpoint its own set of active and free itd's (or sitd's for full-speed devices). When a new itd is needed, it is taken from the head of the free list, if possible. However, itd's must not be used twice in a single frame because the hardware continues to access the data structure for the entire duration of a frame. Therefore if the itd at the head of the free list has its "frame" member equal to the current value of ehci->now_frame, it cannot be reused and instead a new itd is allocated from the DMA pool. The entries on the free list are not released back to the pool until the endpoint is no longer in use. The bug arises from the fact that sometimes an itd can be moved back onto the free list before itd->frame has been set properly. In Soeren's case, this happened because ehci-hcd can allocate one more itd than it actually needs for an URB; the extra itd may or may not be required depending on how the transfer aligns with a frame boundary. For example, an URB with 8 isochronous packets will cause two itd's to be allocated. If the URB is scheduled to start in microframe 3 of frame N then it will require both itds: one for microframes 3 - 7 of frame N and one for microframes 0 - 2 of frame N+1. But if the URB had been scheduled to start in microframe 0 then it would require only the first itd, which could cover microframes 0 - 7 of frame N. The second itd would be returned to the end of the free list. The itd allocation routine initializes the entire structure to 0, so the extra itd ends up on the free list with itd->frame set to 0 instead of a meaningful value. After a while the itd reaches the head of the list, and occasionally this happens when ehci->now_frame is equal to 0. Then, even though it would be okay to reuse this itd, the driver thinks it must get another itd from the DMA pool. For as long as the isochronous endpoint remains in use, this flaw in the mechanism causes more and more itd's to be taken slowly from the DMA pool. Since none are released back, the pool eventually becomes exhausted. This reuslts in memory allocation failures, which typically show up during a long-running audio stream. Video might suffer the same effect. The fix is very simple. To prevent allocations from the pool when they aren't needed, make sure that itd's sent back to the free list prematurely have itd->frame set to an invalid value which can never be equal to ehci->now_frame. This should be applied to -stable kernels going back to 3.6. Signed-off-by: Soeren Moch <smoch@web.de> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|---|---|---|
| .. | ||
| atm | ||
| c67x00 | ||
| chipidea | ||
| class | ||
| core | ||
| dwc3 | ||
| early | ||
| gadget | ||
| host | ||
| image | ||
| misc | ||
| mon | ||
| musb | ||
| otg | ||
| phy | ||
| renesas_usbhs | ||
| serial | ||
| storage | ||
| wusbcore | ||
| Kconfig | ||
| Makefile | ||
| README | ||
| usb-common.c | ||
| usb-skeleton.c | ||
To understand all the Linux-USB framework, you'll use these resources:
* This source code. This is necessarily an evolving work, and
includes kerneldoc that should help you get a current overview.
("make pdfdocs", and then look at "usb.pdf" for host side and
"gadget.pdf" for peripheral side.) Also, Documentation/usb has
more information.
* The USB 2.0 specification (from www.usb.org), with supplements
such as those for USB OTG and the various device classes.
The USB specification has a good overview chapter, and USB
peripherals conform to the widely known "Chapter 9".
* Chip specifications for USB controllers. Examples include
host controllers (on PCs, servers, and more); peripheral
controllers (in devices with Linux firmware, like printers or
cell phones); and hard-wired peripherals like Ethernet adapters.
* Specifications for other protocols implemented by USB peripheral
functions. Some are vendor-specific; others are vendor-neutral
but just standardized outside of the www.usb.org team.
Here is a list of what each subdirectory here is, and what is contained in
them.
core/ - This is for the core USB host code, including the
usbfs files and the hub class driver ("khubd").
host/ - This is for USB host controller drivers. This
includes UHCI, OHCI, EHCI, and others that might
be used with more specialized "embedded" systems.
gadget/ - This is for USB peripheral controller drivers and
the various gadget drivers which talk to them.
Individual USB driver directories. A new driver should be added to the
first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
into any of the above categories, and work for a range
of USB Class specified devices.
misc/ - This is for all USB device drivers that do not fit
into any of the above categories.