forked from Minki/linux
351e3db2b3
The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
165 lines
6.3 KiB
C
165 lines
6.3 KiB
C
/*
|
|
* Copyright © 2014 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "i915_drv.h"
|
|
|
|
struct i915_params i915 __read_mostly = {
|
|
.modeset = -1,
|
|
.panel_ignore_lid = 1,
|
|
.powersave = 1,
|
|
.semaphores = -1,
|
|
.lvds_downclock = 0,
|
|
.lvds_channel_mode = 0,
|
|
.panel_use_ssc = -1,
|
|
.vbt_sdvo_panel_type = -1,
|
|
.enable_rc6 = -1,
|
|
.enable_fbc = -1,
|
|
.enable_hangcheck = true,
|
|
.enable_ppgtt = -1,
|
|
.enable_psr = 0,
|
|
.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
|
|
.disable_power_well = 1,
|
|
.enable_ips = 1,
|
|
.fastboot = 0,
|
|
.enable_pc8 = 1,
|
|
.pc8_timeout = 5000,
|
|
.prefault_disable = 0,
|
|
.reset = true,
|
|
.invert_brightness = 0,
|
|
.disable_display = 0,
|
|
.enable_cmd_parser = 0,
|
|
};
|
|
|
|
module_param_named(modeset, i915.modeset, int, 0400);
|
|
MODULE_PARM_DESC(modeset,
|
|
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
|
|
"1=on, -1=force vga console preference [default])");
|
|
|
|
module_param_named(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
|
|
MODULE_PARM_DESC(panel_ignore_lid,
|
|
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
|
|
"-1=force lid closed, -2=force lid open)");
|
|
|
|
module_param_named(powersave, i915.powersave, int, 0600);
|
|
MODULE_PARM_DESC(powersave,
|
|
"Enable powersavings, fbc, downclocking, etc. (default: true)");
|
|
|
|
module_param_named(semaphores, i915.semaphores, int, 0400);
|
|
MODULE_PARM_DESC(semaphores,
|
|
"Use semaphores for inter-ring sync "
|
|
"(default: -1 (use per-chip defaults))");
|
|
|
|
module_param_named(enable_rc6, i915.enable_rc6, int, 0400);
|
|
MODULE_PARM_DESC(enable_rc6,
|
|
"Enable power-saving render C-state 6. "
|
|
"Different stages can be selected via bitmask values "
|
|
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
|
|
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
|
|
"default: -1 (use per-chip default)");
|
|
|
|
module_param_named(enable_fbc, i915.enable_fbc, int, 0600);
|
|
MODULE_PARM_DESC(enable_fbc,
|
|
"Enable frame buffer compression for power savings "
|
|
"(default: -1 (use per-chip default))");
|
|
|
|
module_param_named(lvds_downclock, i915.lvds_downclock, int, 0400);
|
|
MODULE_PARM_DESC(lvds_downclock,
|
|
"Use panel (LVDS/eDP) downclocking for power savings "
|
|
"(default: false)");
|
|
|
|
module_param_named(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
|
|
MODULE_PARM_DESC(lvds_channel_mode,
|
|
"Specify LVDS channel mode "
|
|
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
|
|
|
|
module_param_named(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
|
|
MODULE_PARM_DESC(lvds_use_ssc,
|
|
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
|
|
"(default: auto from VBT)");
|
|
|
|
module_param_named(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
|
|
MODULE_PARM_DESC(vbt_sdvo_panel_type,
|
|
"Override/Ignore selection of SDVO panel mode in the VBT "
|
|
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
|
|
|
|
module_param_named(reset, i915.reset, bool, 0600);
|
|
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
|
|
|
|
module_param_named(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
|
|
MODULE_PARM_DESC(enable_hangcheck,
|
|
"Periodically check GPU activity for detecting hangs. "
|
|
"WARNING: Disabling this can cause system wide hangs. "
|
|
"(default: true)");
|
|
|
|
module_param_named(enable_ppgtt, i915.enable_ppgtt, int, 0400);
|
|
MODULE_PARM_DESC(enable_ppgtt,
|
|
"Override PPGTT usage. "
|
|
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");
|
|
|
|
module_param_named(enable_psr, i915.enable_psr, int, 0600);
|
|
MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
|
|
|
|
module_param_named(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
|
|
MODULE_PARM_DESC(preliminary_hw_support,
|
|
"Enable preliminary hardware support.");
|
|
|
|
module_param_named(disable_power_well, i915.disable_power_well, int, 0600);
|
|
MODULE_PARM_DESC(disable_power_well,
|
|
"Disable the power well when possible (default: true)");
|
|
|
|
module_param_named(enable_ips, i915.enable_ips, int, 0600);
|
|
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
|
|
|
|
module_param_named(fastboot, i915.fastboot, bool, 0600);
|
|
MODULE_PARM_DESC(fastboot,
|
|
"Try to skip unnecessary mode sets at boot time (default: false)");
|
|
|
|
module_param_named(enable_pc8, i915.enable_pc8, int, 0600);
|
|
MODULE_PARM_DESC(enable_pc8,
|
|
"Enable support for low power package C states (PC8+) (default: true)");
|
|
|
|
module_param_named(pc8_timeout, i915.pc8_timeout, int, 0600);
|
|
MODULE_PARM_DESC(pc8_timeout,
|
|
"Number of msecs of idleness required to enter PC8+ (default: 5000)");
|
|
|
|
module_param_named(prefault_disable, i915.prefault_disable, bool, 0600);
|
|
MODULE_PARM_DESC(prefault_disable,
|
|
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
|
|
"For developers only.");
|
|
|
|
module_param_named(invert_brightness, i915.invert_brightness, int, 0600);
|
|
MODULE_PARM_DESC(invert_brightness,
|
|
"Invert backlight brightness "
|
|
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
|
|
"report PCI device ID, subsystem vendor and subsystem device ID "
|
|
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
|
|
"It will then be included in an upcoming module version.");
|
|
|
|
module_param_named(disable_display, i915.disable_display, bool, 0600);
|
|
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
|
|
|
|
module_param_named(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
|
|
MODULE_PARM_DESC(enable_cmd_parser,
|
|
"Enable command parsing (1=enabled, 0=disabled [default])");
|